Used Mineral Wool for sale (407)

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 5,000 mm, total width: 3,500 mm, total height: 2,950 mm, inner dimension height: 2,650 mm, inner dimension length: 4,900 mm, inner dimension width: 3,400 mm, Equipment: cabin, Automotive Spray Booth The automotive spray booth is a fundamental device in paint repair technology. It enables painting operations to be carried out in safe and comfortable conditions while minimizing the negative impact on the surrounding environment and the workspace. Specifications: - External dimensions: 5000 (+ air handling unit 1350 × 2900 mm) × 3500 × 2950 mm - Entrance door: 3000 × 2600 mm (three-wing design) - Service door: 700 × 2000 mm - Structure: made of steel sheets - Heat exchanger: standard steel - Panels: steel panels with mineral wool insulation in the walls Cabin Wall Structure: - Thickness: 50 mm - Insulation: EPS polystyrene - Color: white Cabin Base: - Cabin mounted directly on floor/concrete surface Double Ceiling: - External ceiling paneling - Full-surface plenum chamber for air supply Air Exchange System: - Supply system: - Jet turbine 4 kW – 2 units Rsdpjxnpczefx Abmsbt - Airflow capacity: 26,000 m³/h - Airflow system: - Jet turbine 5.5 kW – 1 unit - Airflow capacity: 18,000 m³/h Lighting: - 8 side-mounted lamps - Ceiling lighting: 24 LED tubes Air Heating System: - Single-stage oil burner Riello model 40 G20 - Burner control: manual - Heating time: 8–15 minutes Filtration System: - Double-layer filtration structure - High-capacity air purification system with filtration efficiency up to 99%

Condition: new, Factory-new electrically heated 1150L stainless steel agitator tank with insulation and propeller agitator, including operating manual and CE declaration of conformity. Type: EBB1150RWP Also available with alternative agitators and in other sizes. Volume: 1150L Dimensions approx.: Internal Ø 1190mm x cylindrical height 1000mm External Ø: 1390mm Total height: approx. 1300mm plus agitator drive Material: 1.4301 / AISI304 stainless steel Surface: IIIc/IIId / satin finish Internal welds ground smooth Max. operating temperature: 110°C Max. operating pressure: atmospheric - Upright design on four tubular legs with forklift channels - Top: Central traverse with two hinged covers - Bottom: Flat sloped base with lateral outlet DN50 DIN11851 and butterfly valve, EPDM gasket - Insulation: 50mm mineral wool around the cylinder, hermetically welded stainless steel 1.4301 cladding Equipment: 1x Top traverse with two hinged cover halves, clamp function for the lid Rbsdsw Dy D Depfx Abmet Stainless steel grating below the hinged lid, bolted and removable 1x Agitator flange on the top 1x Inlet port DN50 DIN11851 on the top 1x Outlet fitting with butterfly valve DN50 DIN11851, EPDM gasket 1x nameplate Propeller agitator for low-viscosity media Power: 0.75 kW Speed: 1410 rpm Operating voltage: 3PH 400V

Condition: new, functionality: fully functional, Year of construction: 2025, container length: 7.2 ft, color: white, overall weight: 600 kg, maximum load weight: 600 kg, empty load weight: 600 kg, loading space volume: 6.6 m³, loading space width: 1,200 mm, loading space length: 2,200 mm, loading space height: 2,500 mm, machine/vehicle number: Sanitärcontainer DUSCHE-DUSCHE, Equipment: bathroom, shower, Sanitary Container | Shower Container | Shower Cabin | Double WC Container | 120cm x 220cm | Model SHOWER-SHOWER | High-Quality and Flexible Solution Available units can be viewed and collected directly from our warehouse. Our office and accommodation containers provide an excellent solution for a wide range of applications. They are characterized by outstanding quality, maximum flexibility, and short delivery times. Technical Details: Dimensions: • Length: 220 cm • Width: 120 cm • Height: 250 cm • Weight: 600 kg Insulation: • Ceiling/Walls: 5 cm PUR (polyurethane) • Optional: 10 cm insulation with PUR, PIR, or mineral wool available • Floor: 16 mm fiber cement board Rbodpfevwbqtex Abmet • PVC covering Equipment: • 2 compartments • 2 external doors • 2 showers • 2 ventilation systems Colors: • Facade color: RAL 9002 • Frame color: RAL 9002 • Customization: Individual designs according to customer requirements possible Premium workmanship for long-term use Stock & Delivery: • In-stock units: Same-day shipping • Not in stock: Production time depending on the model, 2 to 4 weeks • Worldwide shipping: We offer professional shipping to all countries for fast and reliable delivery. • Custom dimensions: Products can be manufactured according to the customer's specific requirements. Showroom Address: Im Mannenberg 9a, 53557 Bad Hönningen For further information or tailored solutions, please do not hesitate to contact us!

Condition: new, functionality: fully functional, Year of construction: 2025, Detailed Specification: - Internal dimensions: 5500 × 1500 × 2300 mm (L × W × H) - External dimensions: 5700 × 1900 × 2700 mm (L × W × H) Rbjdpfxoxna U Ue Abmot - Entrance doors: Double-wing, 1700 × 2300 mm (W × H) - Wall panels: Thickness 100 mm, width 950 mm, tongue-and-groove structure; steel sheet 0.5 mm with mineral wool insulation inside - Box: Panels 100 mm thick, filled with mineral wool - Heating system: RIELLO oil burner model 40G20; heating capacity 200,000 Kcal/h; heat exchanger made of 2 mm stainless steel - Maximum heating output: 200,000 Kcal/h, total 1 set - Roof: Panels 100 mm thick with mineral wool insulation inside - Control system: Heating control, time setting, fault indicator, emergency stop, hour counter, temperature limit regulator, total operating hours display - Total power: 6 kW - Overhead conveyor system: 4 tracks; maximum load 400 kg each We can manufacture ovens of any required dimensions. We provide complete systems including transport traverses, spray walls, and powder coating guns — as shown in the photos.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,850 mm, total length: 12,125 mm, total width: 5,150 mm, overall weight: 8,000 kg, warranty duration: 12 months, inner dimension height: 5,000 mm, inner dimension length: 12,000 mm, inner dimension width: 5,000 mm, Equipment: cabin, lighting, PAINT BOOTH 12x5x5M EZ Series Model: - LED ceiling lighting - LED side lighting - RIELLO oil burner - Four fans, including: ‎ ㅤ- 2x supply fans ‎ ㅤ- 2x exhaust fans TECHNICAL PARAMETERS: - External dimensions: 12125x5150x5850 mm - Internal dimensions: 12000x5000x5000 mm - Entrance doors: 4000x4800 mm (2 units, four leaves, reinforced hinges) - An additional BOX 1650 mm x 8000 mm should be included in dimensions – can be placed on either the right or left side. - Structure: galvanized steel frame - Heat exchanger: high-grade stainless steel - Panels: filled with mineral wool insulation - Drive-on ramps – 2 units - Fully grated floor The reinforced frame construction prevents vibration and the air surge effect from the main supply duct. Double Roof Design: - Upper outer layer - Inner truss structure with V600 ceiling filter Air Circulation System: - Supply system: Jet turbine 7.5 kW – 2 units - Exhaust system: Jet turbine 7.5 kW – 2 units Air Filtration System: - Pre-filter collects particles larger than 10 μm - Ceiling filter collects particles larger than 5 μm - Floor filter: Paint Stop - Carbon filter Lighting: - Ceiling lights: 52 LED tubes (14 angled fixtures with 4 tubes each) - Side lighting: 26 LED panels integrated into the right, left, and rear walls Burner: Riello – 2 units, oil model 40 G20, approx. 200,000 Kcal/h - Heat exchanger: high-quality stainless steel - Heating time: 8–15 min (max. 80°C) Optional Features: - Roof-mounted boxes Rodpfxsxm U Exe Abmobt - Insulated roof - Pass-through doors - Water curtain - Color according to RAL palette - Explosion-proof (EX) version available

Condition: used, Vertical insulated tank 100m³ Diameter 3.85m Height 11.25m The tank is insulated with mineral wool It is lined with trapezoidal sheet metal Rodpfx Abexl Th Njmsbt It has space for a side agitator The tanks are dismantled, ready for loading.

Condition: new, functionality: fully functional, Year of construction: 2025, color: black, overall weight: 1,600 kg, empty load weight: 1,600 kg, loading space width: 2,400 mm, loading space length: 6,000 mm, loading space height: 2,500 mm, machine/vehicle number: Cafe Container Model Imbiss, Office Container | Snack Container | Sales Container | Coffee Container | Model IMBISS | 240cm x 600cm | High-Quality and Flexible Solution Available products can be viewed in our warehouse and picked up directly. Our office and living containers provide an excellent solution for a wide range of applications. They are distinguished by outstanding quality, maximum flexibility, and short delivery times. Technical Details: • Dimensions: 240 x 600 x 250 cm • Weight: 1350 kg Insulation: • Ceiling/Walls: 5cm PUR (Polyurethane) • Robust and special floor chassis • 2 mm galvanized steel sheet • Mineral wool insulation between panels • Optional: 10 cm insulation with PUR, PIR, or mineral wool • Floor: 16 mm fiber cement panel + PVC covering Equipment: • 1x Room • 1x Hatch • 2x Doors • 1x Window • 2x LED lights inside • 2x Power outlets per room Colors: • RAL7016 High-quality workmanship for long-term use Rbjdpowyc N Uofx Abmjt Stock & Delivery: • In-stock: Shipping same day • Out-of-stock: Production 2–4 weeks depending on model • Worldwide shipping available • Custom sizes available Showroom Address: Im Mannenberg 9a, 53557 Bad Hönningen For more information or tailor-made adjustments, we are happy to assist you!

Year of construction: 2008, condition: as good as new (ex-display), 3 pieces, standing on double T-rails, rectangular, coolable/heatable, insulated steel tanks, year 2008 - used - (former palm oil storage tanks) capacity approx. 45.400 ltr. Rodpfxod Tmcvo Abmsbt length approx. 12.000 mm width approx. 2.400 mm height approx. 2.900 mm on tank roof: 1 manhole DN 600 1 socket 2 1 socket 3" 1 extraction flange DN 160 1 ½" socket inlet and return for heating register 2" at the front side: 1 filling pipe DN 80 Insulation: 80 mm mineral wool otherwise according to drawing + photos

Condition: good (used), Year of construction: 2009, rotor diameter: 1,000 mm, rotor width: 1,600 mm, Hammer mill Working width: 1600 mm Rotor diameter: 1000 mm Drive: 75 kW Application: Rbjdpfx Abji E S Sqjmst Shredding of all impact-brittle materials such as - impact-resistant plastics - E-waste -Wood waste - mineral insulation waste (e.g. glass wool, rock wool,...)

Year of construction: 2016, condition: ready for operation (used), 1. Unit pump system based on pump „TAPFLO” SRT 200-OOPQ-GBB-TC-A - ( IMG_1502,1501,1505,1510,1511) - mounted on foundation slab in accordance with standard DN 24259, enclosed with a roof - pomp unit contains (speed reducer, 45KW electric motor, Inverter ABB) - electric heating pump system up to 120 deg. C` (Surface heating of the pomp head) - efficiency abt 200 t /h - assembly year 2016 - working abt 1000hrs 2. Unit pump system based on pump „„VIKING” type N34 (IMG 1493,1496,1501) - mounted on foundation slab in accordance with standard DN 24259, enclosed with a roof - pomp unit contains (speed reducer, 35KW electric motor, Inverter ) - oil heating pump system up to 150 deg. C` - efficiency abt 150 t /h - assembly year 2016 - working abt 1000hrs 3. Pumps „TAPFLO” SRT 200-OOPQ-GBB-TC-A (2 pcs) year of production 2014 - spare pumps for unit no 1 4. Unit pump system based on pump „„VIKING” type N34 ( pump in good working condition ,but in order to increase efficency elements inside pump to be reconitioned) - mounted on foundation slab in accordance with standard DN 24259, enclosed with a roof - pomp unit contains (speed reducer, 35KW electric motor, Inverter ) - Electric heating pump system up to 120 deg. C` - efficiency abt 70 t /h - assembly year 2013 5. Container boiler - quick steam generator Loos DF 400 embedded in conteiner 20’ included fuel tank inside conteiner (IMG 1522,1523,1524,1527,1529,) for heating of small circulation heating system in railtanks and simultanously heating disch walves of railtanks - low generator and burners mileage - new (not used) water treatment station 6. Collector pipe 60 m long DN 250 insulated with mineral wool, covered with steel plates (5 pcs 12 meters each one) - 6 inputs DN100 (connetions to railwagons), ended by valves DN 100 - 3 outputs to pumps DN150 ended by valves DN 150 7. Set of 6 flexible hoses DN 100 made of stainless steel to connect collector pipe with railway tanks 8. Flexibe hoses DN150 to connect collector with pumps - 2 pcs/ 1m long - 3 pcs/5m long Attached pls find loading scheme of our portable station (IMG 1725) A – flexible hose B – Unit pump system C – Steam Generator D – railway tanks (6 pcs) Pictures will follow in separate mail We wld like to sell all elements of our bitumen portable pumping station in one package . Estimated value of described complete mobile loading station as pckg on level of abt EUR 100.000,-. but we are flexible to final price. We wld like to point out that this heavy duty equipment offered by us has been tailor made for our needs in cooperation with our Scandinavian partners, where many years of their knowledge and experience has been used .Equipment is reliable in difficult working conditions , very efficient and at the same time very simple to use. It took us some time to complete the entire portable pumping station. Described equipment is very low used and ready for operations at any time Rbodpef Sad Uefx Abmot

Condition: new, functionality: fully functional, Year of construction: 2025, Asphalt Hot Box НВ-2 With Asphalt Hot Box HB-2 by TICAB TM you can deliver hot asphalt from the asphalt plant to the place of road works, with minimal heating loss. Thermal insulation of the container with quality mineral wool allows to keep the working temperature of the asphalt up to 12 hours without additional heating. At the same time, the HB-2 is additionally equipped with a Beckett diesel heating system and a Thermal Controller. HB-2 is equipped with a hydraulic lifting system. There is a manhole on the top of the tank for loading the hot asphalt. Asphalt Hot Box HB-2 by TICAB TM is easily mounted on the truck body or on a trailer. Rbedpfet It Dvox Abmjt SPECIFICATIONS: - Capacity - 1,8 m3 TICAB Manufacturer of road machines: bitumen emulsion sprayers, crack sealing mahines, asphalt recyclers, street vacuum cleaners, universal loaders and other road machines. The highest European quality, competitive prices. If we do not have an official representative office in your country, we are looking for a distributor there! We are looking forward to contact with you!

Condition: new, - External dimensions: 8125x4650x4600 mm - Internal dimensions: 8000x4500x3800 mm - Entrance gate: 4000x3800 mm (four wings) - Service door: 640x1800 mm - Construction: high-grade steel - Heat exchanger: high-grade steel - Panels: filled with mineral wool - Total power: 22kW - Seating: inside/outside Rbsdpjnbdlbefx Abmst (after prior roofing of the cabin by the customer on his own) - Floor fully grated - Air supply system: Jet turbine 5.5kW - 2 pieces - Exhaust system: Jet turbine 7.5kW - 1 piece - Ceiling lights: Coffers with LED fluorescent lamps 36pcs. - Side lights: LED panel 120x30cm - 12 pcs. Power: 48W - one piece 1000 lumens - Burner Riello RG5S 160-310 kW - The cabin is available in different colors

Condition: new, The illustrative photos show the realizations for the customer of the 4x7 cabin Rbedpfx Asr Ha Ehsbmst The offer applies only to the painting booth without the preparation area (possibility to purchase a preparation zone at the customer's request) - External dimensions: 7000x4000x3500 mm - Internal dimensions: 6900x3900x2650 mm - Entrance gate: 3000x2600 mm (three wings) - Service door: 640x1800 mm - Construction: high-grade steel - Heat exchanger: high-grade steel - Panels: filled with mineral wool - Total power: 16 kW - Floor fully grated - Air supply system: Jet turbine 4.0kW - 2 pieces - Exhaust system: Stream turbine 5.5kW - 1 piece - Ceiling lights: Coffers with LED fluorescent lamps 32pcs. - Side lights: LED panel 120x30cm - 8 pcs. Power: 48W - one piece 1000 lumens - Burner Riello 40 G20 95-213 KW - The cabin is available in different colors

Condition: new, - External dimensions: 7200x5200x3800 mm - Internal dimensions: 7100x5100x3100 mm - Entrance gate: 4000x3100 mm (four wings) - Service door: 640x1800 mm - Construction: high-grade steel - Heat exchanger: high-grade steel - Panels: filled with mineral wool - Total power: 21kW - Seating: inside/outside (after prior roofing of the cabin by the customer on his own) - Floor fully grated - Air supply system: Jet turbine 5.5kW - 2 pieces - Exhaust system: Jet turbine 7.5kW - 1 piece - Ceiling lights: Coffers with LED fluorescent lamps 32pcs. - Side lights: LED panel 120x30cm - 12 pcs. Power: 48W - one piece 1000 lumens - Burner Riello RG5S 160-310 kW Rbsdpfx Absm Tv I Aemet - The cabin is available in different colors

Year of construction: 2025, condition: new, functionality: fully functional, Available models on GAS and Electrical power supply with different dimensions and capacities Perfect for artisanal bakeries, semi-industrial plants and retail stores The ideal solution for anyone looking for superior baking performance and maximum flexibility when working with different types of bread and pastries, regardless of shape, size or quantity. It burns perfectly at both full and partial loads. Innovative baking systems for perfect results BTT (Bottom to Top) baking system – air circulates from the bottom up, creating a floor oven effect for a unique baking quality. The result: a product that leaves customers breathless! DAF (Double Air Flow) – extremely even baking thanks to the double airflow that encompasses each product. Not available on model 4676. Ideal for: Cakes and pastries of low weight (e.g. 60–70 g Kaiser pastries, biscuits, sticks, tarals...) Fast baking cycles (less than 15 minutes) High racking (more than 18 levels) Narrow and long trays (e.g. 46×80 cm) OPT function – allows you to monitor the efficiency of the furnace operation in real time, helping in more rational use and energy savings Technical characteristics: Baking surface: 6.3 m2 (n°18T 46x76) Oven dimensions WxDxH: 123x171x251 Minimum room height: 270 cm Power GAS: 52 kw 44000 kcal/h Electrical power: 1.5 kW Weight: 1350 kg Max. Baking temperature: 300 °C Heating: electric or gas/light fuel oil Main switch located on the control panel Advanced control and management TOUCH electronic control "Ready to Bake" – the stove is always ready with lower consumption "Recovery Time" – the exact time to re-readiness Partial Load Management Password protection of recipes USB 2.0 for fast and secure data transfer. Effective steam management Speed Dry – faster steam ejection (70% faster), for crispier and more fragrant products Increased steam generator (standard equipment) – higher volume and better steam distribution Automatic steam damper Stainless steel exhaust – 900 rpm Energy efficiency and durability High-performance heat exchanger and firebox (in combustible versions) Double armored heaters (electric version) Two-layer high-density mineral wool insulation Rubber-silicone seal + stainless steel – long life and no steam leakage Thermo-reflective glass – saves energy Ergonomic vertical handle along the entire height of the door, with double locking system Raised stove bottom – additional thermal insulation Connection to a power limiter (only on electric models) Construction and ergonomics: Stainless steel front and hood Stainless steel floor with adjustable flaps for air regulation Rotary trolley unit with motor and mechanical overload protection Manual lifting mechanism Trolley access door 194.5 cm high (model 4676 off) Door with hinges on the right side Stainless steel access ramp, gentle inclination for easy insertion/removal of the trolley Flat inner surface – easy to clean Prepainted steel side panels Access to the main controls from the front Heavy Duty version (HD kit) – available for models 80100 and 80120 Rbodpfxewhdhue Abmst For intensive work over 8 hours a day and average temperatures above 250 °C – additional reinforcements for maximum durability.

Condition: used, Year of construction: 2010, functionality: fully functional, Max. working temperature 90° C. Max. working pressure: 2 kg/cm². Power 3.000.000 kcal Fuel: wood waste The MTN boiler is a hot water generator that uses sawdust as fuel, with "AUTOFOCO" type burner loading. The boiler is of horizontal type Rjdpfstywzqex Abmobt Tubular plates and shell are made of thick carbon steel sheet. The core is covered with refractory cement with a high percentage of alumina. At the rear there is a cast iron grate for burning solid pieces of wood, calculated for an output equal to 60% of the rated output of the boiler. The tube bundles are made of carbon steel. The base incorporating the hearth is of large dimensions, to allow the burner to be mounted with a plug. The boiler is supplied with an air distribution manifold. The boiler body is insulated with mineral wool and covered with cast iron Accessories: - 1 Adjustable thermostat - 1 safety thermostat - 1 safety thermostat with manual start - 1 thermometer - 1 hydrometer - 1 combustion control device - 1 thermostatically actuated valve positioned in the flue tube MANUAL FEED GRILL is a fixed grill made of special nodular cast iron bars, fixed in refractory material, easily interchangeable. 1 Complete electrical components, motor protections, contactors. 1 Complete set of wiring accessories 1 General circuit breaker 1 Power supply for auxiliary circuits 1 Circuit diagram 1 Pressure gauge 2 Temperature probes 1 Dust suction system consisting of a fan with belt transmission, with decanter cyclone, boiler-cyclone connections, cyclone-fan, fan-fan, fan-smoke stack, in painted carbon steel. 1 Chimney

Condition: new, Year of construction: 2025, Boiling Kettle, designed for thermal tratment o different types of meat products. - Double jacket- oil - Electronic control ADITEC with temperature control in the oil double jacket and heart temperature sensor - Delayed start by time - Open system - Operating temperature up to 140 °C Rsdjwqb Ukopfx Abmsbt - Thermal insulation with mineral wool - Cylindrical work environment or as per customer choice - Stainless steel AISI 304

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 540 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 700 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 5, This 5-axis DMG Mori Seiki LaserTec 50 was manufactured in 2019. It features a Celos with Siemens 840D sl Operate control, integrated ytterbium cw fiber laser, and a compact design with a 4 m² footprint. Ideal for machining diamond tools with dimensions up to Ø 355 mm and 420 mm in length. If you are looking to get high-quality laser machining capabilities, consider the DMG Mori Seiki LaserTec 50 machine we have for sale. Contact us for more information. • Control: CELOS with Siemens 840D sl Operate; 21.5" ERGOline Control with multi-touch screen • Processes: Laser fine cutting, laser drilling, laser welding Redpfx Absyfv Tvomsbt • Work capacity: Machining diamond tools up to Ø 355 mm and 420 mm in length • Axes/table: NC swivel rotary table; 5-axis transformation; high-dynamic torque motors in B and C axes • Drives: Linear drives in X/Y with acceleration > 1 g • Laser source: Integrated ytterbium CW fiber laser; 450 W QCW ytterbium fiber laser with 4,500 W pulse peak power and 450 W average power • Processing head: 80 mm focal length; collision switch • Vision: Camera through beam path for fiber laser • Construction: Solid mineral cast base • Footprint: Approx. 4 m² • Condition/usage: ~100 working hours (as new) • Notes: CNC precision laser machine with high-speed processing; highly dynamic and precise Additional equipment • Fanuc robot automation • Keller automatic extraction system • Basement exhaust extraction system

Condition: used, Year of construction: 2017, Overview The blowmoulder was built in 2017 by the manufacturer SIPA. The machine is until February 2026 in operation and can be visited. It is used in a mineral water factory. The blowing machine is in a very good condition due to regular maintenance. Technical data  Nominal capacity: 18.000 bph Nr. of moulds: 8 Last used formats: 0,5l 1,0l 1,5l Neck type: PCO-28-1810 Incl. preform feeding system Incl. preform cooling system Min. - max. bottle diameter: 50 - 125 mm Min. - max. bottle height: 80 - 349 mm Rbjdox Ti R Espfx Abmst

Condition: used, Year of construction: 2019, Overview   The fully automatic shrink hood applicator MSK381 was manufactured by the German OEM in 2019. It was used in a German mineral water company for the packaging of PET bottles in shrink trays on euro pallet and dd/half pallet. The machine is still in production and can be visited in operation.  Technical Details   Capacity  60 pallets / h (Euro)  92 pallets / h (DD)  Formats  Euro Pallet  DD Pallet  Scope of delivery  Control panel – HMI  Conveyors according to layout  Hood station   Shrinking frame with gas burners  Rbsdjr R Rd Ispfx Abmjt

Condition: used, Year of construction: 2003, Overview The blowmoulder was built in 2003 by the manufacturer SIPA. The machine is still in operation and can be visited. It is used in a mineral water factory. The blowing machine is in good condition due to regular maintenance and technical upgrades, which have been well documented. Technical data  Nominal capacity: 24,000 bph for each format Nr. of moulds: 20 Last used formats: 0,33l (2 sets) 0,4l 0,5l (4 sets) 0,75l (2sets) 1,0l Dimensions: 7600 x 4200  x 4400 Weight of empty machine: 18,5t Weight of full machine, working condition: 24,5t Blowing air recovery system Overhaul for about 200,000 € recetly performed 161800 operating hours Scope of delivery  SFR 20 Preform feeder Preform hopper Spare parts vrious sets of moulds Documentation Program backup Rbsdpfxeu Nph Is Abmst

Condition: used, Year of construction: 1999, Overview  This KHS filling monobloc was manufactured in 1999. The filling monobloc is still in production until the end of October and can be viewed in person. The special feature of the filler is that it can process carbonated or still mineral water with natural flavors using a micro-dosing unit. It also includes an accumulation table. Technical data  Rinser, Isobarometric Filler, Capper Monobloc | KHS, Zalkin | VK-E 40/50/10/S PET | 1999 (low working hours) Filling carbonated mineral water and also carbonated mineral water with natural flavours Processing: PET bottles 1,25L & 0.50L cylindrical petaloid base Bottle neck: PCO28 1881 Current capacity: 23.400 bph Number of rinsing nozzles (KHS Innoclean): 40 Number of filling valves (KHS Innofill): 50 Number of capping stations (Zalkin): 16 Including also micro-dosing unit Perrier for natural flavours With caps magazine & elevator Accumulation table Gebo Sidel type AQ file Dynamic accumulation and buffer between the filler outlet and the labeller inlet, avoids untimely stops upstream (filler, blow-moulder) due to the labeller Rsdpfx Abewvl Dgemsbt

Condition: used, Year of construction: 2004, Overview  The empty bottle inspector was built in 2004 by the German manufacturer Krones. It is installed in a mineral water company in Germany. On the line, where it is installed, the owner also does contract bottling. Therefore it has many detections and formats available. Technical details  Output: up tp 50,000 bph Last used for:  0,25 l Vichy bottle 0,5l Set 1 0,5l Set 2 0,5l Set 3 0,7l GDB 0,75l GDB Inspection modules Bottom inspection camera Sealing surface inspection camera Thread inspection camera with cone optics Side wall inspection camera Contour detection and color detection with camera Accessories/scope of delivery    Ejector some spare parts available some conveyors Rjdpfxexch Aco Abmsbt

Condition: used, Year of construction: 2004, Overview This NATE Veral 60 bottle filling machine was manufactured in 2004 by the Czech company NATE. It is currently installed in a mineral water company in Germany, where the line also handles contract bottling. As a result, the machine is equipped with multiple detection systems and supports various bottle formats. Please note: The machine does not include a closer or corker. Technical Details Manufacturer: NATE (Czech Republic) Model: Veral 60 Year of Manufacture: 2004 Number of Filling Stations: 60 capacity: 20.000 bottles/h Filling Method: Counter pressure (overpressure) Bottle Formats: 0.25 L Vichy 0.5 L Set 1–3 0.7 L GDB 0.75 L GDB Condition: Well-maintained, fully operational Rodpeyb Si Sefx Abmsbt

Condition: used, Year of construction: 2003, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 5,000 bph List of machines Blow moulder | Nissei ASB | NB-40MC | 2003      Preforms feeder      Preforms tipper      Transporters | AVE | 2004      Injection and blowing | Nissei ASB | PF4-1BH |2000      Dryer Moretto | 2000   Loader Moretto | 2000   Heater Moretto | 2000   Transporters | AVE | 2004      Lot Coder | Marken | Smartlase 110i | 2009      Rinser - Filler - Capper | GyM | Tribloc 9-12-3| 2012      Labeller|Auxiemba | Basic 720-6-HM-iz  | 2010 | 7000 bph Shrink Packer | SMI | ST-2000 | 2009 | 30 packs / min Handle applicator | SMI HA 25Sx | 2012 | 25 packs /min Palletizer | Lapeyra | RP1C | 1992 (retrofit as CE RD1215) Wrapping|Impropak | Girospak 747 SBP | 1990 (retrofit as CE RD1215) Transporters | AVE | 2000      Rjdotuyq Aopfx Abmebt