Used Miter Fence for sale (1,857)

Condition: used, Height-adjustable with a rabbeting cutter; the fence can be adjusted via the handle and is mounted on a sturdy table with rollers. Dksdpfx Akez H Txbe Ajw Location: Nattheim

Condition: new, Year of construction: 2026, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft businesses. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: grooving cutter, miter saw, milling unit, radius pull blade, corner cutter, surface pull blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius pull blade. Max. edge thickness: 3 mm Dedpfx Akji Anade Askw Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; grooving cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank preparation incl. glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination design), corner rounding cutter, radius pull blade, surface pull blade (incl. pneumatic lifting mechanism), finishing station, robust chain drive, ball-bearing double roller pressure pad, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Hebrock F5 F5/08/4 Quick-change preparation for corner cutter F5/08/5 additional interchangeable motor for corner cutter with tool set F5/09/4 Multi-radius pull blade (R1/R2) F5/10 Undercarriage F5/14 additional interchangeable tank F5/24/1 Spray device for release agent F5/24/2 Spray device for cleaning agent F5/25 Spray device for edge F5/27 Nesting for milling cutter and radius pull blade F6/28 Spray for texture finish F5/30 Pneumatic 3-point adjustment (radius, bevel, flush milling) F5/31 Jointing up to 50 mm F5/32 LED lighting Location: In stock at warehouse 54634 Bitburg Immediately available - in stock.

Condition: as good as new (ex-display), Year of construction: 2025, Carriage length: 3200 mm Cutting width at rip fence: 1000 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 200 mm Scoring unit: no Saw blade height adjustment: handwheel Saw blade tilt adjustment: handwheel Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut fence display: scale Maximum saw blade diameter: 550 mm Saw blade diameter, fully retractable under table: 500 mm Motor power: 9 kW Motor brake: yes / automatic Extraction connection: 100 mm and 120 mm Machine length: 3500 mm Djdpewm Nrcjfx Ak Aekw Machine width: 2000 mm Weight: 900 kg

Condition: new, functionality: fully functional, SCHORR Rotary Mower RR580KRM - Type: High grass mower/rotary mower - Working width: 58 cm for efficient mowing of meadows, roadsides, and orchard areas - Cutting system: 4 freely swinging blades, ideal for tall, dense grass - Swath deposit: Removable swath cloth for a clean cut with no mulching - Function: Self-propelled, easy to operate – suitable even on slopes and uneven ground - Maneuverability: Wheel freewheel for easy turning, separate engagement of mowing and drive - Availability: NEW & AVAILABLE IMMEDIATELY! Applications The RR580KRM is excellent for overgrown areas, orchard meadows, and roadsides. Its 58 cm working width enables fast mowing with neat depositing of the cut material – perfect for later hay or green forage processing. Rotary mower system The centerpiece of the mower is the ball-bearing glide disk with four movable blades. This robust system reliably handles varying grass heights and obstacles for a uniform cutting result. The cutting height of approx. 30 mm protects insects and young plants. Drive & Handling The wheel drive can be engaged as needed for optimal working speed. Freewheeling wheels reduce effort when cornering, making maneuvering easier. Grippy tractor-profile tires provide maximum traction on diverse surfaces. Typical Uses - Orchard meadows and tall grassland - Roadsides, embankments, and fence lines - Fallow land and boundary strips around farms, equestrian arenas, or storage areas Ergonomics and Transport The height-adjustable and foldable handlebar ensures ergonomic operation and compact storage. Weighing approximately 65 kg, the RR580KRM remains stable yet agile on uneven terrain. Technical Specifications - Manufacturer: SCHORR - Model: RR580KRM - Engine: Air-cooled 1-cylinder four-stroke engine with 6 HP - Drive: Self-propelled - Blade type: Freely swinging blades - Number of blades: 4 - Dead weight: 65 kg Dimensions Dodpsw Sntbjfx Ak Aokw - Overall length: 1070 mm - Overall width: 570 mm - Overall height: 840 mm - Cutting height: approx. 30 mm - Cutting width: 580 mm We always have spare parts in stock and our service team is happy to assist with any questions. Whether delivery or pickup in 48465 Schüttorf – we have the right solution. Please contact us to schedule pickups. Would you like to finance or lease? Talk to us – we offer attractive options. Our team looks forward to advising you!

Condition: new, Year of construction: 2026, Holzkraft HBS precision wood band saws for the craftsman Top quality, workmanship and price-performance ratio Particularly quiet and precise running thanks to a torsion-free machine housing Large-dimensioned gray cast iron saw table made from one piece, with a precisely ground and polished surface. Quick saw band tensioning via eccentric lever on the back of the machine Standard with two speeds Precise 3 roller saw band guides, standard at the top and bottom from HBS 351 Quick cutting height adjustment via rotary knob and rack with millimeter scale Smooth-running aluminum parallel stop with eccentric quick clamp and magnifying glass Standard miter angle stop, adjustable by 60 degrees on both sides Aluminum parallel stop with eccentric quick clamp Technical data: Work table dimensions: 610 * 431 mm Cutting speed: 900/450 m/min Flywheel diameter: 430 mm Max. cutting height: 270 mm Max. cutting width with stop: 370 mm without stop: 410 mm Saw band length: 3345 mm Precision guide 3 rollers: top/bottom Saw table inclination: -10 degrees, + 45 degrees Motor power: 1550 watts/400 volts Weight: 130 kg Dimensions in mm: 680*512*2048 Extraction nozzle diameter: 2*100 mm Location: from stock 54634 Bitburg Dksdjvk Sd Dspfx Ak Aew - immediately available -

Condition: excellent (used), functionality: fully functional, Year of construction: 1995, working width: 3,100 mm, pressing force: 170 t, working range: 3,100 mm, AMADA MULTI AXIS CNC 170 TONS X 3100 HYDRAULIC DOWNSTROKING PRESS BRAKE WITH AMADA OPERATEUR II 8 AXIS CNC CONTROL Description TYPE HYDRAULIC DOWNSTROKING CAPACITY 170 TONS CONTROL AMADA OPERATEUR II NO OF AXIS 8 INCLUDING Z1 AND Z 2 BENDING LENGTH 3100mm OPEN HEIGHT 450 STROKE LENGTH 180 THROAT DEPTH 410 Dksdpfx Akjv Iftgo Aow MOTOR SIZE 15 KW FRONT GUARDING ERWIN SICK MACHINE MOUNTED ELECTRONIC GUARDS SIDE FENCING REAR INTERLOCKED WEIGHT 11 TONS

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 6,200 mm, travel distance Y-axis: 1,520 mm, travel distance Z-axis: 660 mm, number of axes: 5, number of slots in tool magazine: 22, controller manufacturer: BIESSE, controller model: XP600, spindle speed (max.): 22,000 rpm, This 5-axis BIESSE Rover C 6.65 was manufactured in 2009. It features a working area of 6,200 x 1,520 x 275 mm and a powerful main electrospindle with a maximum speed of 22,000 RPM. The machine includes a 22-position tool changer and an integrated vacuum system for efficient operation. If you are looking to get high-quality CNC machining capabilities, consider the BIESSE Rover C 6.65 CNC processing center we have for sale. Contact us for further details. Djdoz Trctjpfx Ak Askw - Control Unit: Biesse XP600 (Upgraded to PC with Windows 10 OS in 2021)- Main Electrospindle Power (S1 100%): 12 kW @ 12,000 RPM- Main Electrospindle Power (S6 40%): 15 kW @ 12,000 RPM- Max Spindle Speed: 22,000 RPM- Tool Interface: HSK F63- C-Axis: 360° continuous rotation (Replaced complete in 2015)- B-Axis: +/- 100° (positioning), +/- 98° (interpolation)- Z-Axis Stroke: 660 mm- Z-Axis Feed Speed: 30 m/min- Drilling Head: BH 9 (5 vertical spindles at 32 mm pitch in Y, 2 horizontal double-output spindles)- Tool Changer: 22-position chain-type tool changer (180 mm pitch, max tool dia 250 mm) + 1-position Pick-up tool changer- Work Table: 10 ATS work tables (L = 1,525 mm), 30 module supports with Electronic Positioning System (EPS X-Y)- Vacuum System: Vacuum pump 250 m³/h (Replaced in 2016)- Cooling Unit: 1,600 W liquid cooling unit for electrospindles- Chip Conveyor: Integrated chip transport belt in machine bed- Optional Equipment: Uniclamp clamping devices (20 double-stroke, 10 round), 8 horizontal clamps, 20 vacuum modules (132x146 H74mm), 6 vacuum modules (132x75 H74mm), 8 positioning aids (36 kg lift force each), saw blade 350 mm Z=28, safety fence elements, control cabinet with air conditioning.- Software: NC-Hops 5-axis license, ACADemy 2D CAD, Automatic suction cup positioning module.

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, CNC control: HEIDENHAIN iTNC 530 (HSCI) with a 15.1" flat-screen display and a pivoting control panel 2. Work table / Clamping surface Length: 2,200 mm Width: 1,000 mm Maximum transport load: 7,200 kg Djdpfx Asz Tugbsk Aekw Number of T-slots: 7 Size of T-slots: 22 H12 mm Reference slot: 22 H7 mm T-slot spacing: 140 mm 3. Automatic milling head (Option -AIH60A OIL) Design: Diagonal, swiveling in 2 planes Speed range: 0 – 6,000 rpm (Option) Tool holder: DIN 69871 AD (ISO 50) / Taper DIN 69871 Draw bolt: DIN 69872 Form A Tool clamping force: 15,000 N Lubrication: Automatic grease cycle lubrication (housing made of steel cast GS 60, designed for 45 kW and max. 2,000 Nm) 4. Main spindle drive motor / Manufacturer: Siemens, main spindle drive, Type: 1PH7 Drive power max. (Option): 36 kW from 376 rpm (standard equipment 30 kW) Maximum torque (Option): 930 Nm (constant up to 376 rpm; optional in gearbox up to 1,460 Nm or 1,750 Nm) Speed control / Gearbox: 3-stage (oil-cooled) with automatic switching and helical gears made of hardened chrome-nickel steel Spindle speeds (6,000 rpm Option): Low range: 0 – 984 rpm Medium range: 918 – 2,456 rpm High range: 2,404 – 6,000 rpm 5. Axis drives and axis feeds Axis drive motors: Manufacturer Siemens (digital AC drives) Rapid traverse max. (X/Y/Z axis): 15,000 mm/min Working feed max. (X/Y/Z axis): 12,000 mm/min Feed force max. (X/Y/Z axis): 24,000 N Measuring system: Linear measuring system “Heidenhain” (0.001 mm) in all axes Machine weight: approx. 17,000 kg Connection power: approx. 54 kVA Materials: Machine bed, work table, machine frame and vertical slide made of lamellar graphite cast iron GG30; milling slide made of nodular graphite cast iron GJS-600 Guide rails: Hardened and ground with Turcite B sliding strip coating (in X/Y/Z) Hydraulic system: Manufacturer Rexroth (including hydraulic weight compensation in the vertical axis) Lubrication & cooling: Automatic central lubrication of axes/ball screws, control cabinet with lighting and air conditioning unit Additional control: Portable electronic handwheel “Heidenhain HR-410” with axis selection, additional electric foot pedal for manual tool change Enclosure & Safety: 4-sided splash guard enclosure with large sliding doors, safety switches (CE compliant) and safety fencing for the rear.

Condition: used, Year of construction: 2017, Optimized miter saw Manufacturer: Salvador Type: SuperCut 500 Year of manufacture: 2017 Dkodpfx Aj Ad Ighok Aew Technical data - Saw blade diameter: 500 mm / 450 mm - Maximum feed rate: 200 m/min - Working height: 900 mm - Compressed air consumption: 400 Nl/min - Compressed air supply: 6 bar - Minimum connection power: 14 kW - Extraction speed: 45 m/s Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: new, Year of construction: 2005, Carriage length: 2000 mm Cutting width at rip fence: 700 mm Cutting width at crosscut fence: 2200 mm Cutting depth: 100 mm Scoring unit: no Saw blade height adjustment: manual / hand crank Saw blade tilt adjustment: manual / hand crank Rip fence adjustment: manual Saw blade angle display: digital Cutting height display: - Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 315 mm Dkodpoxrbh Rsfx Ak Aow Speeds: 1 Motor power: 4 kW Motor brake: yes – automatic Extraction connection: 80 mm and 120 mm Machine length: 3000 mm Machine width: 1700 mm Weight: 900 kg

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tilting saw blade and sliding table made of anodized aluminium Item number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Weight (net): approx. 690 kg Dust Extraction Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (main motor): 7.0 kW Rated duty cycle (main drive): S6 Duty cycle (main drive): 40% Sliding Table and Worktable Sliding table length: 3200 mm Sliding table width: 360 mm Djdoxw N N Hspfx Ak Aekw Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 3200 mm Edging length: 3200 mm Saw blade tilting range: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note max. cutting height: independent of scorer Saw blade diameter: 400 mm Note saw blade diameter: independent of scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm EQUIPMENT Scoring unit with separate scoring motor Anodised aluminium sliding table Handle for sliding table On/off switch on sliding table for main and scoring blade motors Edging frame Material roller on edging frame Rip fence with round bar guidance Stops: two professional folding stops Edging shoe Excenter clamp Table extension Table width extension Pendulum-type saw blade guard Motorised height adjustment and tilt of saw unit, digital tilt angle display Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Slider length: 3200 mm Cutting width at the rip fence: 1350 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 125 mm Scoring saw: yes Saw blade height adjustment: handwheel Dksdpfx Asiv Hdvjk Asw Saw blade swivel adjustment: handwheel Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 400 mm Rotational speeds: 3000 / 4000 / 5000 RPM Motor power: 7 kW Motor brake: yes / automatic Dust extraction port: 80 mm and 120 mm Machine length: 3400 mm Machine width: 2000 mm Weight: 900 kg

Condition: new, Year of construction: 2026, Panhans BSB 800 band sawing machine TECHNICAL DESCRIPTION Solid German machine construction Machine stand in shapely modern design torsion-free double-chamber welded steel construction Upper and lower door secured by limit switches Upper and lower precision band saw blade guide APA Dkodor Igzcepfx Ak Ajw 2, size 2 Finely planed gray cast iron table Swivel table top up to 45 Dyn. balanced band saw wheels with vulcanized rubber bandages Stop ruler can be used to the left of the saw blade, Fence profile can be reversed Blade tension indicator 1 piece saw blade5775 x 30 x 0.8 mm, tooth width9 mm, No. 3780.301 Mechanical height adjustment of the saw blade guard by hand wheel with locking pinion Rotary cam switch with star-delta start and emergency stop button Mechanical motor brake with main switch and motor protection relay CE-compliant GS tested Left-hand machine stand Rotary cam switch with star-delta start and emergency stop switch Wheel diameter 800 mm Belt speed 1800 m/min Cutting height 520 mm Cutting width 780 mm Blade length max. 5775 mm Saw blade width min. /max. 15 mm /4 0m m Optional with special coating Saw blade width min. max. 10 mm / 35 mm Table size 1145 x 760 mm Table height 930m m Suction nozzle 2 x 0 120 mm, Motor power 4 kW / 5.5P S Voltage 400 V / 50 Hz Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 525 kg Location: From stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Dimensions and Weights Length approx. 2000 mm Width/Depth approx. 1110 mm Weight approx. 430 kg Jointer Feed table length 1034 mm Maximum chip removal 5 mm Dust extraction connection Dust extraction port diameter Thickness 2 x 120 mm Thickness Dsdpfx Aehkz E Tjk Aokw Minimum working height 3 mm Maximum working height 230 mm Maximum chip removal 5 mm Electrical Data Power of drive motor 5 kW Connection voltage 400 V Mains frequency 50 Hz Planer cutterhead Type TERSA Number of planer cutters 4 pcs Speed 5200 min⁻¹ Maximum planing width 410 mm Feed Speed 6 / 12 m/min The TERSA planer cutter system enables particularly quiet operation. Helically toothed steel feed roller for consistent and uniform material feed Material feed with two speeds Numerical display for thickness table height The 2,000 mm long jointer tables facilitate easy adjustment of large workpieces. Work tables are made of gray cast iron, annealed and stress-relieved, making them durable and dimensionally stable Stable, large aluminum jointer fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical display for planing height The high machine weight ensures maximum precision and smooth operation. Powerful industrial motor Robust steel/gray cast iron construction Equipment details Jointer fence Stable, large aluminum jointer fence (1200 x 160 mm) With precise round bar guide Dust extraction hose connection The dust extraction ports for the jointer and thicknesser point in the same direction during jointing and planing. Therefore, the dust extraction hose can be connected to the machine from the same side for both types of planing. You do not need a hose that runs around the machine. Planing unit Helically toothed steel feed rollers for consistent and uniform material feed Solid anti-kickback devices prevent workpieces from being thrown back 4-cutter shaft ensures an optimal planing result Chain drive Sturdy chain drive Drive gears made of steel Solid gray cast iron bearing block Two feed speeds Standard with two feed speeds Comfortably selectable from the operator panel Material feed Helically toothed steel feed rollers for a consistent and uniform material feed without marks Several teeth engage simultaneously for powerful feed Wear-free compared to rubber feed rollers Thickness table adjustment Adjustment via handwheel Numerical display for the set planing height Accuracy 1/10 mm Tersa planer cutterhead No more adjustment and screwing required Planer cutter change in seconds Self-locking Particularly quiet Perfect planing result Location: In stock, 54634 Bitburg - immediately available - Subject to prior sale

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Dkedpfxjpgkmwj Ak Asw Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding workshops. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: jointing cutter, miter saw, milling unit, radius pull blade, corner cutter, surface pull blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius pull blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edgebanding machine F5 Next With PLC control (including touchscreen) and with hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank preparation including glue dispensing device, HF miter saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combination design), corner rounding cutter, radius pull blade, surface pull blade (including pneumatic feed), finishing station, robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. Hebrock F5 F5/08/4 Quick-change preparation for corner cutter F5/08/5 additional interchangeable motor for corner cutter with tool set F5/09/4 Multi-radius pull blade (R1/R2) F5/10 Chassis F5/14 additional interchangeable tank F5/24/1 Spray device for release agent F5/24/2 Spray device for cleaning agent F5/25 Spray device for edge F5/27 Nesting for cutter and radius pull blade Djdpfslht Hwjx Ak Aokw F6/28 Spray texture finish F5/30 Pneumatic 3-point adjustment (radius, bevel, flush milling) F5/31 Jointing up to 50 mm F5/32 LED lighting Location: In stock, 54634 Bitburg - available immediately -

Condition: used, Year of construction: 1996, Cutting height at 90°: 200 mm Cutting length: 410 mm Horizontal mitre angle range: 45° - 90° - 25° Dkjdpfx Aj Af Hnaek Aow Vertical mitre angle range: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Feed brake: yes / automatic Dust extraction port: 100 mm Machine length: Machine width: Weight: 300 kg

Condition: new, Year of construction: 2025, Working width: 410 mm Planer head: Spiral cutterhead Number of knives: 66 Jointer table length: 2020 mm Jointer fence, angle adjustable: yes, 45° to 90° Max. thicknessing capacity: 230 mm Thicknessing table height adjustment: handwheel Planing thickness display: mechanical digital indicator Feed speed: 5.5 / 10 m/min Infeed roller: steel Outfeed roller: steel Table rollers: no Dedpexrbg Tjfx Ak Aokw Motor power: 5.3 kW Motor brake: yes, automatic Extraction port: 100 mm Machine length: 2020 mm Machine width: 882 mm Weight: 480 kg

Condition: used, Year of construction: 2003, working width: 510 mm cutter head: Streifenmesser number of blades: 4 surface table length: 2000 mm fence tilting: ja surface table fold up: manuell maxilum thickness planing height: 230 mm height adjustment thickness table: electric read out table height: digital Djdpfxexgn N Rs Ak Askw feed speed: 7 / 14m/min infeed roller: Stahl outfeed roller: stahl pressure beam: durchgehend table roller: ja motor power: 5,5 kW motor brake: ja suction connection: 160mm machine legth: 2200 mm machine width: 950 mm weight: 800

Condition: new, Year of construction: 2025, Working width: 420 mm Planer shaft: Tersa Number of knives: 4 Jointer table length: 2000 mm Concave/pointed joint adjustment: no Adjustable jointer fence angle: yes Lifting jointer tables: manual Maximum thicknesser pass height: 240 mm Thickness table height adjustment: electric Planing thickness display: digital Dkjdsxrbg Hspfx Ak Asw Feed speed: 6/12 m/min Infeed roller: steel Outfeed roller: steel Pressure bar: continuous Table rollers: no Motor power: 5 kW Motor brake: yes, automatic Extraction port: 160 mm Machine length: 2300 mm Machine width: 1100 mm Weight: 450 kg

Condition: used, Year of construction: 1985, working width: 500 mm cutter head: strip knive number of blades: 4 surface table length: 2700 mm adjustment surface table: Hebel read out: table height fence tilting: yes motorpower: 4 kW Dkjdsm H Uxrepfx Ak Aew motorbrake: yes, automatic machine length: 2800 mm machine width: 1000mm weight: 1050 kg

Condition: new, Year of construction: 2025, Working width: 410 mm Planing cutterhead: Tersa Number of knives: 4 Feed table length: 2360 mm Feed table adjustment: Lever Chip removal indicator: Scale Depth-of-cut indicator: - Adjustable angle of the fence: yes Motor power: 4.4 kW Machine length: 2360 mm Machine width: 860 mm Djdogqwx Ajpfx Ak Aokw Weight: 475 kg

Condition: used, Year of construction: 1998, sliding table length: 3000 mm cutting width at the fence: 1000 mm cutting width at the cross cut: 3200 mm cutting depth: scoring unit: ja height adjustment sawblade: manuell / Kurbel tilting adjustment sawblade: manuell / Kurbel adjustment fence: manuell readout sawblade tilting: Digital read out sawblade height: - read out fence: Scala read out crosscut: Scala Dkedpfozdzbbjx Ak Aow sawbladediameter: 450 mm number of speeds: 4000 U/min motor power: 4 kW motor brake: ja - automatisch suction connection: 80 mm und 120 mm machine length: 3000 mm machine width: 2100 mm weight: ca. 1100 kg

Condition: used, Year of construction: 1991, sliding table length: 3300 mm cutting width at the fence: 1000 mm cutting width at the cross cut: 2800 mm cutting depth: 170 mm scoring unit: nein height adjustment sawblade: hydraulisch tilting adjustment sawblade: hydraulisch adjustment fence: manuell read out sawblade tilting: Scala read out cutting height: Scala read out fence: Scala read out crosscut: Scala sawbladediameter: 500 mm sawblade speeds: 2800 / 4000 / 5500 motorpower: 5,5kW suction connection: 80 und 120mm machine lenght: 4000 mm Dedpozdzbhofx Ak Ajkw machine width: 2200 mm weight: ca. 1300kg

Condition: used, Year of construction: 1988, tilting spindle: Ja -5 bis 45° height adjustment: elektrisch tilting adjustment: elektrisch fence adjustment: manuell height indicator: digital tilting indicator: digital Dsdpozq Dc Iofx Ak Aekw fence indicator: Scala spindle diameter: 30 mm speeds: 3000, 4500, 6000, 8000, 10000 motor power: 6 kW motor brake: Ja, automatisch sustion connection: 2 x 120mm machine length: 1200mm machine wide: 1400mm weight: 1100kg