Used Morbidelli U 26 for sale (56)

Condition: used, Year of construction: 1991, functionality: unexamined, Working area 3130 x 1100 mm Hjdsxu Eyvepfx Amiel Maximum processing height for door machining: 70 mm Extraction port diameter: 200 mm 1 main boring unit with 29 independent spindles, 32 mm spindle spacing Top milling units with LEUCO interface: 2 pcs Grooving unit: 1.1 kW Horizontal milling unit for lock cases Horizontal boring head with 2 spindles Horizontal boring heads for right and left side drilling: 3 pcs Converter: 17 kW Machine dimensions (LxWxH) approx.: 5000 x 3000 x 1800 mm Weight approx.: 3500 kg

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: AA2/004582, functionality: fully functional, operating hours: 14,500 h, travel distance X-axis: 3,120 mm, travel distance Y-axis: 1,320 mm, number of axes: 5, TECHNICAL DETAILS X-axis travel: 3,120 mm Y-axis travel: 1,320 mm Number of axes: 5 MACHINE DETAILS Operating hours: approx. 14,500 h EQUIPMENT Hodoy Akr Aspfx Amijl Suction pads Mounted air-blow nozzle Newly installed control unit Note: The machine has already been dismantled by the manufacturer.

Condition: used, machine/vehicle number: 008397, X axis working area: 3650 mm Y axis working area: 1520 mm Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Hjdpfx Aox S Epbjmijl Total number of drilling spindles: 30 Total number of tool changer positions: 16

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground ball screws of the highest precision class. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. Such characteristics are important for ensuring balanced movement even in more complex tasks. The movement of the various axes is controlled by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters that can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different P Hjdpfx Aovvi Nzemisl

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Hodpfx Asvvi Rfjmisl

Condition: ready for operation (used), Year of construction: 2007, number of axes: 5, overall weight: 6,550 kg, This 5-axis MORBIDELLI Author X5 was manufactured in 2007. It features a powerful spindle that was completely overhauled in 2022, ensuring optimal performance. The machine includes a circular carousel tool changer and comes with multiple vacuum pods for workpiece holding. If you are looking to get high-quality CNC wood machining capabilities, consider the MORBIDELLI Author X5 machine we have for sale. Contact us for further details. • Condition: Well-maintained and in good overall condition • Spindle: Completely overhauled in 2022; new shaft and new bearings Hjdpfoy Egw Tjx Amijl • Power supply: 400 V, 50 Hz, 3-phase + neutral • Short-circuit current (Icc): 10 kA • Centralized lubrication system: PAG-50N • Tool changer: Circular carousel type Additional equipment • Vacuum pump: Becker VTLF 250; capacity 244/286 m³/h • Workholding: Multiple vacuum pods/suction cups for workpiece holding

Condition: used, machine/vehicle number: 008481, X axis working area: 6360 mm Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Hedoy Edpmspfx Amijl Total number of drilling spindles: 23 Total number of tool changer positions: 36

Condition: used, Year of construction: 2011, X-Y working area: 4,422 x 1,753 mm X-Y travel: 4,955 x 1,918 mm Z-axis travel: Z = 400 mm 5-axis MORBIDELLI milling spindle C-axis rotation: 650° B-axis tilt: 290° (-10°) Power: 11 kW at 20,000 rpm, adjustable via inverter Liquid cooling HSK 63F interface Chip conveyor Automatic CNC central lubrication RAPID 24 tool changer (24 tool positions) Drill head extension with 30 + 6 spindles 8 positioning aids 2 cross lasers Vacuum pump 250 m³/h PC control with Windows Office Weight approx. 5,000 kg Hjdjy D Rv Dspfx Amijl Storage location: Customer

Condition: used, Year of construction: 2006, Working area X-Y-Z: 5300 x 1700 x 180 mm Travel length X-Y-Z: 6040 x 1810 x 280 mm Drilling head with 30 + 8 spindles Speed: 6000 rpm Power: 2.2 kW Automatic central lubrication Worktable TV with 10 supports L=1500 4 working zones 2 cross lasers Vacuum pump 250 m³/h PC control Windows Vertical milling unit ISO 30 7.5 kW with tool changer RAPID 14 and vector axis Hjdpfxex Twd Hj Amiol Additional drilling unit (E-axis) Dongle for XILOG software Location: Nattheim

Condition: ready for operation (used), Year of construction: 2010, WORK CENTER TO C.N. SCM Make: MORBIDELLI Model: UNIVERSAL 3612 Year: 2010 - Working range: 3.680 X 1.260 X 150 mm. - 1 Milling motor 8,5 Kw (11,5 HP) - 1 Automatic rotary gearbox with 12 positions Hedjqpgglspfx Amisl - 1 Drilling comb with: 18 vertical + 8 horizontal + 1 "X" saw bits - Vacuum pump 250 m3/h - DXF compatible software - BUMPER protection - CE STANDARDS - Weight 3.000 Kg.

Condition: good (used), Year of construction: 1998, functionality: fully functional, operating hours: 25,000 h, input voltage: 380 V, input current: 35 A, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 180 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,350 mm, workpiece height (max.): 110 mm, workpiece weight (max.): 200 kg, number of axes: 3, number of slots in tool magazine: 4, controller manufacturer: num, total height: 27,000 mm, total length: 5,500 mm, total width: 2,700 mm, overall weight: 4,000 kg, table length: 3,000 mm, table width: 1,100 mm, year of last overhaul: 2024, Equipment: documentation/manual, Well-maintained CNC machining center with low operating hours. Milling unit 6.6 kW ISO 30 with 4-position tool changer Hsdpfxjyurwpo Amisl Milling unit 6.6 kW ISO 30 MANUAL TOOL CHANGE Drilling unit 10+4 drills Vacuum pump 100 m³ Automatic machine lubrication Table 3000x1100 mm Updated Xilog plus software Refurbished NUM 1040 controller

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, travel distance X-axis: 4,400 mm, travel distance Y-axis: 1,300 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 45 m/min, Equipment: CE marking, The machine has the following configuration: Drilling units: Upper unit with 30 vertical and 6 horizontal spindles Milling unit 1: Upper unit, 5 controlled axes, 7.5 kW motor power, liquid cooling system Milling unit 2: Upper unit, 11 kW motor power, 18,000 rpm, liquid cooling system Tool magazine 1: 24 positions, mounted at the rear of the machine Tool magazine 2: 6 positions, mounted on the working head TECHNICAL DETAILS X-axis travel: 4,400 mm Y-axis travel: 1,300 mm Maximum workpiece pass-through height: 400 mm Hsdeyzy S Nepfx Amisl X-axis traversal speed: 40 m/min Y-axis traversal speed: 45 m/min Z-axis traversal speed: 22.5 m/min MACHINE DETAILS Control system: WINDOWS Machine programming software: XILOG Vacuum pump individual capacity: 250 m³/h Connected load: 35 kW EQUIPMENT Worktable with vacuum rail supports Number of vacuum rails: 8 Vacuum clamping for workpiece CE safety standards Automatic chip extraction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 8340

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Working area X: 4300 mm Working area Y: 2100 mm Working area Z: 180 mm 5-axis electrospindle with power cooling Vertical drilling heads: 12 Hsdpfx Amey Ai Treiol Horizontal drilling heads X: 4 Horizontal drilling heads Y: 2 Grooving saw in X direction 16-position tool changer on the side of the gantry 3 vacuum pumps Xilog programming software Automatic loading and unloading system Labeling station Protective safety nets

Year of construction: 2009, condition: ready for operation (used), Main Drive Number of axis 3 This 3-axis MORBIDELLI UNIX KBT was manufactured in 2009. It features a CNC control system, a working area of 3000 × 1000 mm, and a maximum panel thickness of 60 mm. Equipped with multiple drilling and milling units, including 24 vertical and 4 horizontal spindles, it also has a fixed saw unit and supports both manual and automatic panel handling. Consider the opportunity to buy this MORBIDELLI UNIX KBT CNC Wood Machining Centre. Contact us for more information. Application Types Hjdpfx Ajx Nr Uromiel CNC Wood Machining

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: AL 00 - 647, functionality: fully functional, 5-axis CNC machining center Hodpfjyyb N Tsx Amijl Software: SCM Xilog Plus Operator software: SCM Panel-Mac X = 3470 mm Y = 1240 mm Z = 180 mm 6 cross beams 6 loading aids Rear & middle stop rows Vacuum pump 90 m³/h Vacuum cup positioning with crosshair laser Disc tool changer with 12 tool positions 5-axis milling spindle 360° 11 kW 20,000 rpm Tool interface HSK 63-F Handheld control unit Drilling head X = 7 Y = 5 X horizontal 2 x 2 Y horizontal 1 x 2 Grooving saw with 5-axis milling spindle Safety device "Bumper" Central lubrication

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: AL/009416, functionality: fully functional, travel distance X-axis: 5,500 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 400 mm, number of axes: 5, Equipment: CE marking, 5-AXIS CNC WORKING CENTER MORBIDELLI MOD. AUTHOR X5.55 EVO – CE RULES Hjdpfxeywd Ado Amiel - Working dimensions: X 5.500 mm Y 1.700 mm Z 400 mm - Chip conveyor belt for wastes - Automatic centralized lubrication system - Optimized and centralized dust extraction system - 5-axis milling unit 11 kW (15 HP), HSK-63 PRISMA - Liquid-cooled electrospindle - Drilling unit with No. 18 vertical spindles and No. 6 horizontal spindles - TV-MORBIDELLI worktable with 10 supports, L = 1,500 mm - Laser device for suction cup positioning - Saw blade Ø 300 mm - No. 2 additional central side stops - No. 2 additional side stops - No. 30 suction cups - Tool magazine with 12 positions - Becker vacuum pump 250 m³/h (year 2022) - NUM CNC control - No. 10 lifting devices to assist loading - Voltage: 400 V / 50 Hz - S/N AL/009416 - Year 2009

Condition: used, Year of construction: 2001, functionality: fully functional, The machine has been regularly serviced, is well-maintained, and ready for immediate use. Hedpfxoyvt I He Amiol Equipped with a 3-axis system, it allows precise and reliable woodworking operations. It features a 6-position tool changer, enabling efficient and fast switching between different tasks. This machine is suitable for a variety of carpentry and production processes and is an excellent choice for small to medium workshops. Minimum operating space required: 5 x 3 x 2.8 meters

Condition: good (used), Year of construction: 2007, Working area approx. 3600 x 1500 mm X-axis speed: 70 m/min Y-axis speed: 60 m/min Z-axis speed: 15 m/min Electrospindle power: 8.5–13 kW Horizontal drilling spindles: 6–8 Pass-through height approx. 130 mm Z-axis stroke: 240 mm Installed power: 20–30 kW Weight approx. 3,500 kg Required space approx. 7,400 x 3,500 mm Drilling unit: 12 adjustable spindles plus 4 + 2 horizontal spindles Hedpfx Aoyt H Imjmisl Saw Vertical milling unit Interpolating vector axis Horizontal milling unit "TVN" table with six supports, L = 1,500 mm Laser system for suction positions Interpolating vector axis Vacuum pump NC control system with PC-Office Drill speed adjustable via inverter Exact configuration upon request Details subject to change Price ex works. Assistance with dismantling is possible. (Sale on behalf of customer)

Year of construction: 1993, condition: ready for operation (used), A CNC drilling and milling center Morbidelli is available. Travel X/Y/Z: 2600mm/800mm/55mm, machine dimensions X/Y/Z: approx. 3400mm/2400mm/2200mm, weight: approx. 3300kg. An on-site inspection is possible. Available from May 2026. Hedpfeyg Nupjx Amijl

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 80 mm, We offer this very good Morbidelli Uniflex HP Throughfeed Borer and Router CNC, year of construction 2016. Manufacturer: Morbidelli Model: Uniflex HP Year of manufacture: 2016 Condition: very good Category ID: 2074 Type ID: 151 Machine type: Throughfeed Borer and Router CNC The Morbidelli UNIFLEX HP is a high-performance CNC drilling and routing centre designed for precision panel processing in furniture and cabinet manufacturing. It allows drilling on multiple faces of a panel and routing operations with high accuracy while minimizing setup time through automated clamping and CNC control. Key Features • 6-side panel drilling capability with upper and lower machining heads • Up to 134 independent spindles for high production throughput • RO.AX rotoaxial spindle technology ensuring zero backlash and extremely accurate drilling • Dual independent clamps eliminate machine setup time and allow simultaneous operations • Ability to process two overlapped panels simultaneously • Integrated saw blade in X-axis for panel cutting operations • Heavy-duty welded O-frame structure for maximum rigidity and precision • CNC controlled panel movement with brushless motors and ball screws • Xylog Plus 2 CNC software with PC interface Drilling System • 96 vertical drilling spindles (48 upper + 48 lower) • Horizontal drilling spindles: o 8 + 8 in X direction o 4 + 2 in Y direction • Maximum spindle speed: 6,000 rpm • Integrated X-axis saw blade: o Diameter: 125 mm o Speed: 7,500 rpm CNC Control & Software • Industrial PC with Windows operating system • 17" colour display and keyboard interface • Xylog Plus 2 programming software • Programming options: Parametric programming • DXF and ASCII file import support • Simulation and optimisation of drilling cycles Panel Capacity • Panel length: 250 – 3000 mm • Panel width: 70 – 1300 mm • Panel thickness: 10 – 80 mm • Maximum panel weight: 100 kg Axis Speeds • X axis: 120 m/min • Y axis: 35 m/min • Z axis: 30 m/min Machine Requirements • Compressed air: 6.5 bar • Average air consumption: 500 Nl/min • Dust extraction airflow: o Upper head: 5000 m³/h o Lower head: 2250 m³/h Additional Equipment Included • Panel length measuring device • Electrical cabinet with air conditioning • Manual loading and unloading stations with cross belts Hedpfxeyr Uguj Amisl If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: AL/008514, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, workpiece height (max.): 60 mm, overall weight: 2,800 kg, controller model: PC mit Xilog Plus Software, TECHNICAL DETAILS Working area X-axis: 3,000 mm Working area Y-axis: 1,000 mm Workpiece thickness (processable): 60 mm Upper drilling and milling unit Electrospindles: 1 Vertical spindles: 24 Horizontal spindles X-axis: 2 Horizontal spindles Y-axis: 2 Grooving saw unit X-direction: 1 Grooving saw unit power: 2.2 kW Lower drilling and milling unit Electrospindles: 1 Vertical spindles: 24 Horizontal spindles X-axis: 2 Horizontal spindles Y-axis: 2 Grooving saw unit X-direction: 1 Grooving saw unit power: 2.2 kW MACHINE DETAILS Control: PC with Xilog Plus software Weight: 2,800 kg EQUIPMENT Panel clamps Manual workpiece loading on Flotex table Hodpfx Amoydl Adoiol Automatic workpiece unloading Automatic central lubrication

Year of construction: 2013, condition: excellent (used), Technical design: Console table 3050 x 1200 mm with manually movable 6 consoles , each console 2vacuum suction cups and a pneumatic lifting rail point laser set-up aid, vacuum pump CNC control XILOG Plus main spindle 8,5 kW (12 HP) HSK 63F with C-axis , 1500 - 24.000 rpm tool changer plate 12-fold Hedpfx Aokqyizemiel 1 adapter unit swiveling saw drilling head with: 12 vertical spindles, 4+2 horizontal spindles, grooving saw bumper safety system The shown tools, HSK- tool holders, drills etc. are not included in delivery!

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 150 mm, TECHNICAL DETAILS Hedpjx Tqg Uofx Amisl Working area: 3,680 x 1,260 x 150 mm Milling motor: 1 unit, 8.5 kW (11.5 HP) Tool changer: 1 automatic rotary magazine with 12 positions Drill beam: 18 vertical, 8 horizontal drills, and 1 "X" saw drill Software: DXF compatible Safety standard: BUMPER protection, CE standards Weight: 3,000 kg Note: The machine has a software issue and does not include a pump. The estimated cost for correction is approximately €3,000 each.

Condition: used, Code: 0212 Brand: MORBIDELLI Model: AUTHOR 600 K - CE Standard CNC working center with 3 controlled axis for furniture, custom furnishings, carpentry, panels, kitchens, and various - CE Standard Technical data: X-axis working range 3085 mm Y-axis working range 1385 mm Z-axis working range 180 mm Programmable X-axis speed 50 m/min Programmable Y-axis speed 45 m/min Programmable speed Z axis 22,5 m/min Drilling unit: 10 vertical spindles (6 in X direction - 5 in Y direction) - 2 horizontal spindles X axis - 2 horizontal spindles Y axis - Motor power 2,2 Kw - 4000 rpm Router unit: electric spindle 10 Hp - 18000 rpm - 10-spindle tool changer Engraving blade unit - motor 2,2 kW - - 6000 rpm Work surface: 6 work surfaces with 18 suction cups - 4 loading aids Vacuum pump 100 m³/h Automatic lubrication Xylog numerical control Installed power 17/20 Kw Compressed air 6/7 bar Hedpfxoxnlmps Amiel Weight 3000 kg

Condition: used, Year of construction: 1991, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 40 mm, overall weight: 4,000 kg, Taper: PS25 CNC control Tria 6000 Motor power 5.5 kW Hsdpeua Arfefx Amiel There are 4 pieces available