Used Mori Seiki Nzx 1500 for sale (171)

Condition: used, Year of construction: 2007, Mori Seiki NT5400/1800 SZ DCG CNC Twin Spindle Turn & Mill Machine with DMG Mori MSX-701 III CNC Control, Max Work Piece Swing 920mm, Max Turning Length 1921mm, Bar Work Capacity 107mm, Travels x 1 Mill Head 1040mm, Y Axis +/- 255mm, Z I Axis 1940mm, B Axis +/- 120 deg, X 2 267mm, Z 2 1830mm, Spindle Speed 2400rpm, Capto C8 Spindle Taper, Spindle Bore 120mm, Tool Head Spindle Speed 8000rpm, Tailstock Travel 1830mm, 10 Position Tool Turret, (2) x 450mm Powered 3 Jaw Chucks, High Pressure Coolant Filtration System, Clean Mist Oil Mist Extractor, Machine Weight 36000kg. S/No. NT540GE0032 (2007) Casdpexzq R Hsfx Agcsa Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 1986, Technical details: x-travel: 800 mm y-travel: 460 mm z-travel: 510 mm total power requirement: 20 kW weight of the machine ca.: 8 t Vertical Processing Centre Cjdpfxewvblas Agcoaa 20kW is the nominal value. The spindle only needs 7.5kW. It looks like 15kW will be enough. *

Condition: ready for operation (used), Year of construction: 2002, operating hours: 400 h, General Data Machine weight 15000 kg Measurements height 3950 mm Dimensions Machine Length 9500 mm Table Table load 1000 kg Control Unit Brand FANUC Model 16iMA Main Drive Spindle Speed 10000 RPM Number of axis 3 Casdpfx Aox A I A Nsgcoa Spindle motor power 30 kW Movement Z-Axis Movement 1000 mm Y-Axis Movement 1200 mm X-Axis Movement 1080 mm This 5-axis MORI SEIKI SH8000/5AX was manufactured in 2002. Fully overhauled in 2016, it features a Fanuc 16iMA control, a spindle speed of 10,000 rpm, and a tool magazine with a capacity of 150 tools. The machine has a pallet size of 630 × 630 mm and a loading capacity of 1000 kg. If you are looking to get high quality milling capabilities consider the MORI SEIKI SH8000/5AX machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 1990, CNC Machining Center Manufacturer: MORI SEIKI Model: Partner M300 A-1 Year of manufacture: 1990 Control: FANUC O-M Travel paths X/Y/Z: 400 x 300 x 495 mm Distance between spindle center and pallet table (Y-axis): 25 – 325 mm Distance between spindle nose and pallet table (Z-axis): 125 – 620 mm Caedpfx Agjt Rg E Sscea Rapid traverse speed: 24 m/min Feedrate up to 5 m/min Spindle: Ballscrew diameter: 36 mm Feed drives: FANUC AC, X/Y-axis Model 5, Z-axis Model 10 Main spindle speed: 100 – 6,000 rpm Main spindle motor: AC 5.5 kW Main spindle taper: BT 40 Pallet: Pallet size: 315 x 315 mm Pallet indexing angle: 7.5 degrees Indexing accuracy: ±2 seconds Repeatability: ±1 second Clamping force of pallet: 3,400 kg Maximum workpiece weight: 150 kg Automatic tool changer: Number of tools: 30 Tool change time: 2.5 seconds Collet clamping time: 7 seconds Maximum tool diameter: 110 mm Maximum tool length: 250 mm Maximum tool weight: 8 kg Special accessories: Work completion indicator with warning light Magazine for 30 tools Operating hours counter Tool life monitoring Coolant system Work area lighting Weight: approx. 4,500 kg Footprint: 1,900 x 2,300 mm

Condition: used, Year of construction: 1999, x-travel 560 mm y-travel 510 mm z-travel 510 mm control Fanuc MSC 501 (Fanuc 16i) spindle speeds 10000 U/min spindle drive 22 kW rapid travel x/y/z 32 mm/min Number of tool station 40 SK40 Pallet dimension 2 x 400x400 mm table load 0,5 t Csdpfoxyabxjx Agcjaa table index 1 ° total power requirement 56 kVA weight of the machine ca. 8,7 t dimensions of the machine ca. 2,9x4,1x3 m Control Fanuc MSD 501, 40 tool stations, it has trough spindle coolant, chip conveyor and two paletts.

Condition: used, Year of construction: 2000, travel distance X-axis: 600 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, MORI SEIKI SV-400 WITH 4TH AND 5TH AXIS VERTICAL MACHINING CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SV-400 YEAR 2000 CONTROL MORI FANUC MSC 501 TABLE SIZE 900.0 x 500.0 mm TRAVERSES (XYZ) X: 600.0 mm Y: 430.0 mm Z: 460.0 mm SPINDLE SPEED Up to 12,000 rpm SPINDLE TAPER BT 40 ATC 30 STATIONS RAPID TRAVERSE XYZ: 32,000 mm/min FEEDRATE 1-16000mm/min PLUS NIKKEN 4th and 5th AXIS UNIT RENISHAW PROBBING TWIN SWARF CONVEYOR Codpfx Ajtvau Hsgcsaa COOLANT SYSTEM

Condition: used, Year of construction: 2007, Mori Seiki NH5000/40 DCG Twin Pallet Horizontal Machining Centre with Mori Seiki CNC Control, Table Size 500mm x 500mm (500kg), 60 Tool ATC, BT40 Spindle Taper, Travels X Axis 730mm, Y Axis 730mm, Z Axis 850mm, Max Work Piece Size 800mm Diameter x 1000mm High, Spindle Speed Max 14,000rpm, Hydra-Jet G10-1000 High Pressure, Coolant Filtration System, Filtermist Oil Mist Extractor, Machine Weight 12400kg. S/No. NH502GE0400 (2007) Codpfoxzq Ifox Agcjaa Please Note: This lot is Lot 3 of Auction 3443 on our website. Please visit cottandco for more details Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, MORI SEIKI NH 4000 DCG is a Horizontal machining center by MORI SEIKI designed to deliver precision, high accuracy and operational reliability. Working capacities (travels, diameters, workpiece lengths) are not provided. Main technical specifications (spindle speeds, feed rates, power supply, dimensions, weight) are not provided. Accessory and equipment details are not specified. Built to achieve tight tolerances, suitable for automotive, aerospace, medical, watchmaking and machine tool applications Caodpfxjxykrbo Agcsa

Condition: ready for operation (used), Year of construction: 2006, General Data Measurements width 3755 mm Measurements depth 2300 mm Measurements height 2610 mm Machine weight 9600 kg Main Drive Spindle speed range 14000 rpm Tool taper 7/24 Taper No. 40 Number of axis 4 Movement X-Axis Movement 560 mm X-Axis Rapid Traverse 50000 mm/min Y-Axis Movement 560 mm Y-Axis Rapid Traverse 50000 mm/min Z-Axis Movement 630 mm Z-Axis Rapid Traverse 50000 mm/min Table Outer length 400 mm Outer width 400 mm Csdpex A I Niefx Agceaa Table load 400 kg This 4-axis MORI SEIKI NH 4000 DCG was manufactured in 2006 and features a horizontal machining centre with only 1,300 hours on the main spindle, which was overhauled in April 2022. If you are looking to get high-quality milling capabilities, consider the MORI SEIKI NH 4000 DCG machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2004, CNC Control: MSG-501 X axis mm: 900 Y axis mm: 800 Z axis mm: 980 B axis mm: 0.001 Pallet size mm: 630 x 630 Number of pallets: 2 Table load capacity kg: 1,200 Codpexw Rg Hjfx Agcsaa Cutting feed mm/min X,Y,Z: 50,000 Max. rapid traverse m/min X, Y, Z: 50, 50, 50 Spindle speed rpm: 10,000 Spindle power kW: 30/25 Taper type: BT-50 Torque Nm: - Tool changer type: Chain Tool changer positions: 60 Max. tool diameter mm: 110 Max. tool diameter with adjacent positions empty: 320 Max. tool length mm: 600 Max. tool weight kg: 30 Coolant tank capacity l: 930 Through spindle cooling bar: Yes EQUIPMENT Chip conveyor Internal cooling Rigid tapping Manuals, electrical diagram, etc. MACHINE DIMENSIONS Length mm: 3,670 Width mm: 5,300 Height mm: 3,270 Weight kg: 19,000

Condition: used, Year of construction: 2006, Control: MSX-850III Travel: X-260 mm, Z-1,345 mm; max. turning length: 1.298 mm turning diameter: 356 mm Swing diameter: 755 mm Standard turning diameter: 275 mm Rod diameter: 80 mm Rapid: 30 m/min Spindle speed: 4,000 rpm Spindle motor: 18.5/15 kW tool turret: 12 powered stations Drive power AGW: 5.5/3.7 kW Speed driven tools: 6,000 rpm programmable tailstock: 7 m/min Casdpfx Aswg Egvogcsa Tailstock travel: 1.284 mm Quill diameter: 110 mm Total power requirement: 35 kVa programmable hydraulic Lynette SLUB3 SMW Autoblok: Clamping range: 12-152 mm Tool measurement: Tooleye measuring arm equipment: Kitagawa B210 jaw chuck, various holders, driven tools, jaws programmable tailstock: 7 m/min Tailstock travel: 1.284 mm Quill diameter: 110 mm Total power requirement: 35 kVa programmable hydraulic Lynette SLUB3 SMW Autoblok: Clamping range: 12-152 mm Tool measurement: Tooleye measuring arm equipment: Kitagawa B210 jaw chuck, various holders, driven tools, jaws

Condition: used, Year of construction: 1997, MORI SEIKI SL-35 TURN MILL CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-35 YEAR 1997 Caedpsv N D Rtsfx Agcea CONTROL FANUC MSC 516 CHUCK DIA 400.0 mm MAX. TURNING DIA 400.0 mm MAX. TURNING LENGT 780.0 mm SWING OVER BED 600.0 mm OVER CROSS SLIDE 425.0 mm MAX. SPINDLE SPEED 9-2500 rpm TURRET 12 STATIONS TAILSTOCK YES SPINDLE BORE 82.0 mm SPINDLE NOSE A8 RAPID TRAVERSE RATE X: 12,000mm/min & / Z: 15,000mm/min PLUS SWARF CONVEYOR TOOL SETTING PROBE GOOD RANGE OF TOOLING MACHINE MANUALS CLEAN

Condition: like new (used), Year of construction: 2009, operating hours: 1,800 h, functionality: fully functional, * Mori Seiki NZ 2000 T2Y. * APPROXIMATE VALUE OF INCLUDED EQUIPMENT: €40,000–45,000. * Both spindles equipped with two Hainbuch high-precision collet chucks. * Opposed-spindle machine configuration. * 9-axis turning and milling center with CNC control. * Twin spindles. * Spindle size: A2-6. Codex Ab Niopfx Agcjaa * 2 stacked turrets. * 2 C-axes. * 1 Y-axis. * Two integrated 22 kW motors. * Milling spindle power: 7.5 kW. * Two Renishaw automatic tool measurement arms. * Mapps 4 conversational automatic programming system. * Automatic load control and tool consumption monitoring. * Tool life management and consumption monitoring. * Double foot pedal for chuck open/close operation. * Oil chiller for both spindles. * Cutting torque: 340 Nm. * Both turrets feature 16 stations each, all stations driven. * Possibility to set up with up to 32 tools per turret. * Interface for bar feeder installation. * Rear automatic parts catcher with special gripper for long workpieces. * Large set of external and internal toolholders. * Large assortment of axial and radial driven tool blocks. * MQ tool clamping system. * Maximum turning diameter: 320 mm. * Turning length: 810 mm. * Mori Seiki MSX-701 III CNC control. * Maximum distance between main and sub-spindle: 1,130 mm. * Main spindle speed: 5,000 rpm. * Sub-spindle speed: 5,000 rpm. * Driven tool speed: 6,000 rpm. * Maximum bar capacity: 65 mm. * X1 travel: 210 mm. * Y1 travel: +65 / -45 mm. * Z1 travel: 300 mm. * X2 travel: 210 mm. * Z2 travel: 810 mm. * Sub-spindle travel: 920 mm. * Rapid traverse X1, X2: 30,000 mm/min. * Rapid traverse Y1: 20,000 mm/min. * Rapid traverse Z1, Z2: 50,000 mm/min. * C-axis resolution: 0.001°. * Hinged belt side chip conveyor. * Communication ports: USB, PCMCIA card, RS232. * Machine weight: 8,300 kg. * Inspections under power possible. * Supplied with electrical transformer, documentation, parts list, electrical diagrams, programming and operation manuals. * IMPORTANT: Never used with bar feeder; only used for machining aluminum prototypes. * VERY few cutting hours. * Immediate delivery unless sold prior.

Condition: good (used), Year of construction: 1994, functionality: fully functional, FOR SALE LATHE MORI SEIKI CL 15 CNC FANUC Cjdpfx Aoxv Aqzsgceaa

Condition: used, Year of construction: 2011, turning diameter 460 mm turning length 795 mm control MORI SEIKI M730 BM Swing diameter face slide 590/360 mm spindle passage 80 mm Cjdpfexwzfyox Agcoaa Traverse X/Z: 260/795 mm Number of working hours 19.552 h Cutting time 10.704 h spindle drive 18,5 kW total power requirement 40 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 3.994 x 3.056 x 2.187 m Chip chuck Ø250 mm. Chuck sub-spindle Ø170 mm. Holder HAINBUCH chip conveyor suction Bar feeder Hydrafeed Multiservo mod MSV max. bar length 1,600 mm

Condition: excellent (used), Year of construction: 2011, TECHNICAL DETAILS CNC control: MSX-501III X axis mm: 560 Y axis mm: 560 Z axis mm: 660 B axis deg.: 360.000 Table load capacity kg: 400 Cutting feed rate mm/min X,Y,Z: 60,000 Max. rapid traverse m/min X,Y,Z: 50 Spindle speed rpm: 12,000 Spindle power kW: 15 Taper type: ISO-40 Torque Nm: 120 Tool changer type: Chain Tool changer positions: 60 Max. tool diameter mm: 70 Max. tool diameter with adjacent positions empty mm: 170 Max. tool length mm: 450 Max. tool weight kg: 8 Coolant tank capacity l: 500 Through-spindle coolant (high-pressure): Yes EQUIPMENT Double chip conveyor ISO-40 taper High-pressure through-spindle coolant with pump Tool breakage detection probe Part measuring probe RENISHAW MACHINE DIMENSIONS Cjdpfx Asxfka Nogcoaa Length mm: 3,755 Width mm: 2,300 Height mm: 2,610 Weight kg: 7,600

Condition: used, Year of construction: 2010, turning diameter 370 mm turning length 424 mm control Fanuc Caedsxzk Rtjpfx Agcea

Condition: good (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, CNC control MSC 803 25-fold automatic tool changer coolant device Technische Daten / technical details: Verfahrweg X / X-Travel 510 mm Cedpfewhkcxsx Agcjaa Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 510 mm Tischgröße / table size 750x550 mm Drehzahlbereich / spindle speed 8000 UpM /rpm Anzahl der Werkzeugplätze / tool places in changer 25 fach Spindelaufnahme / spindle taper BT40 Gewicht der Maschine ca. / weight 4500 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: like new (used), Year of construction: 2009, MORI SEIKI NL2000/500 CNC TURNING CENTRE YEAR 2009 CONTROL MSX-850 III CONTROL COLLECT CHUCK DRIVEN TOOLING 4 AXIS 16 TOOL TURRET TAILSTOCK PARTS CATCHER TOOL SETTING PROBING SPINDLE SPEED MAX 6000 RPM MAX TURNING DIA 356 MM X TRAVEL 260 MM Y TRAVEL 100 (+ - 50) Z TRAVEL 590 MM C AXIS MOVEMENT 0.001 BAR CAPACITY 65 MM X-MEDICAL MACHINE - ONLY USED ON PLASITC FITTED WITH DUST EXTRACTION Cjdpfxjxvrzps Agceaa MACHINE DIMENSIONS: - Length: 2,705 mm - Width: 2,000 mm - Height: 2,120 mm - Weight: 5,800 kg

Condition: good (used), Year of construction: 1996, functionality: fully functional, For sale Cajdpfx Agoxv Anascoa MORI SEIKI SL 15 lathe CNC FANUC

Condition: like new (used), Year of construction: 2007, functionality: fully functional, TECHNICAL DETAILS CNC Control: MSX 711III MAPPS IV (FANUC) X axis travel (mm): 730 Y axis travel (mm): 510 Z axis travel (mm): 510 B axis (mm): +160 / -180 C axis (degrees): 360 Number of pallets: 1 Table size (mm): Ø500 Maximum table load capacity (kg): 300 Cutting feed rate (mm/min, X/Y/Z): 50,000 / 50,000 / 40,000 Maximum rapid traverse (m/min, X/Y/Z): 50 / 50 / 40 Spindle speed (rpm): 12,000 Spindle power (kW): 18.5 / 15 Taper type: BT-40 Torque (Nm): - Tool changer type: Chain Tool changer positions: 122 Maximum tool diameter (mm): 90 Maximum tool diameter with adjacent positions empty (mm): 125 Maximum tool length (mm): 300 Maximum tool weight (kg): 8 Coolant tank capacity (L): 750 INCLUDED EQUIPMENT Rotary table with digital readouts Coolant through spindle Electronic handwheel integrated on CNC panel Cjdpfx Aowv Sgujgcjaa Main benefits of the included FANUC options: - Enhanced control power and stability: Enables simultaneous management of all 5 real axes with complete smoothness and precision, maintaining performance even during complex machining operations. - Expanded memory and advanced program management: Capacity to store up to 1,000 programs, ideal for production environments with multiple references or short series. - Custom interpolations and macros: Facilitate the programming of special paths, automatic cycles, and subroutines tailored to operator requirements, reducing setup times and errors. - High-speed processing and maximum precision: Optimized FANUC control provides smoother movements, reduced vibration, and increased dimensional accuracy, especially in simultaneous 5-axis machining. - Full compatibility with automation systems: The system is ready for use with EROWA or other automatic changer systems; easily integrates into automated lines or robot cells. MACHINE DIMENSIONS Length (mm): 2,771 Width (mm): 3,948 Height (mm): 3,264 Weight (kg): 12,400

Condition: used, Year of construction: 1998, x-travel 840 mm y-travel 760 mm Caedpfxjxzk Rgo Agcoa z-travel 840 mm control Fanuc MCS-516

Condition: excellent (used), Year of construction: 2001, TECHNICAL DETAILS Description CNC Control: MSG-501 X axis travel (mm): 560 Y axis travel (mm): 510 Z axis travel (mm): 510 B axis (mm): 360 x 1º Pallet size: 400 x 400 mm Table load capacity (kg): 500 Number of pallets: 3 Cutting feedrate X, Y, Z (mm/min): 40,000 Max rapid traverse X, Y, Z (m/min): 40 / 40 / 40 Csdpfow A Nwkjx Agcsaa Spindle speed (rpm): 10,000 Spindle power (kW): - Taper type: BT-40 Torque (Nm): - Tool changer type: MATRIX Positions in tool changer: 40 Max tool diameter (mm): - Max diameter with vacant positions: - Max tool length (mm): - Max tool weight (kg): - Coolant tank capacity (l): - Through spindle coolant (bar): Yes EQUIPMENT Chip conveyor BT-40 taper Through spindle coolant Machine Dimensions Length (mm): 3,200 Width (mm): 2,250 Height (mm): 2,830 Weight (kg): 8,900

Condition: excellent (used), Year of construction: 2000, TECHNICAL DETAILS CNC control: MSG-501 Axis X mm: 215 Axis Z mm: 490 Axis Y mm: +40 / -30 Maximum turning diameter mm: C-Axis increment: 0.001° Maximum turning length mm: 510 Cutting feedrate mm/min X, Z, Y: - Swing over bed mm: Ø 300 Swing over cross slide mm: Ø Bar capacity mm: Ø 56 Max. rapid traverse X, Z m/min: 24 Main Spindle: Spindle speed rpm: 5,000 Spindle power kW: 7.5 Torque Nm: - Main spindle bore: - Main spindle nose: A2-5 Sub-Spindle: Spindle speed rpm: 5,000 Spindle power kW: 7.5 Torque Nm: - Sub-spindle bore: - Sub-spindle nose: A2-5 Turret positions: 12 Number of powered tool stations: 12 Powered tool speed rpm: 6,000 Powered tool power kW: 5.5 EQUIPMENT Cjdexfv E Dspfx Agcjaa Chip conveyor Bar feeder: LNS Quick Load Servo II Overhead gantry loader. CNC control system: MSG-501 (Fanuc) Set of fixed and powered tool holders 3-color status light Bar feeder interface Manuals MACHINE DIMENSIONS Length mm: 2,705 Width mm: 2,000 Height mm: 2,120 Weight kg: 5,800

Condition: excellent (used), Year of construction: 2007, TECHNICAL DETAILS: - CNC Control: MSX 803III - X Axis travel: 260 mm - Z Axis travel: 590 mm - Y Axis travel: +/- 50 mm - Maximum Turning Diameter: 356 mm - C Axis Indexing Increment: 0.001° - Maximum Turning Length: - Cutting Feed Rate X, Z, Y: Caodpfewdrfgsx Agcoa - Swing Over Bed: - Swing Over Carriage: - Bar Capacity: Ø 65 mm (main spindle) - Max. Rapid Traverse X, Z: - Main Spindle 12” - Spindle Speed: 5,000 rpm - Spindle Power: 18.5 kW - Torque: - Main Spindle Bore: mm - Main Spindle Nose: A2-6 - Sub-Spindle - Spindle Speed: 6,000 rpm - Spindle Power: 11 kW - Torque: - Sub-Spindle Bore: mm - Sub-Spindle Nose: A2-5 - Turret Positions: 12 - Number of Driven Tool Stations: 12 - Driven Tool Speed: 6,000 rpm - Driven Tool Power: 5.5 kW EQUIPMENT: - Chip conveyor - 3-color status light - Fixed tool holders - Parts catcher MACHINE DIMENSIONS: - Length: 2,705 mm - Width: 2,000 mm - Height: 2,120 mm - Weight: 5,800 kg