Used Multipal S for sale (67,214)

Year of construction: 2021, operating hours: 16,132 h, condition: used, functionality: fully functional, For sale is a Lauber energy utilization unit, model L-ENZ 280-L-S, which was purchased directly from Lauber GmbH in 2021, installed, and connected. The unit was used exclusively for wood drying in drying containers at a biogas plant and was operated primarily during the summer. Therefore, it was not used continuously throughout the year. The current operating hours are 16,132. Dcode Ahpm Hopfx Ak Aop The unit is in very good and well-maintained condition, is currently still connected, and is operational. Technical data: • Manufacturer: Lauber GmbH • Type: L-ENZ 280-L-S • Unit No.: 42799 • Year of manufacture: 2021 • Operating hours: 16,132 h • Motor power: 7.5 kW • Variable frequency drive circulation pump: 0.75 kW • Total rated power: approx. 9 kW • Motor rated current: 14.3 A • Total rated current: approx. 17 A • Fuse rating: 25 A • Rated voltage: 3/N/PE AC 400/230 V, 50 Hz • Control voltage: 24 V DC • Wiring diagram: SP1551 Equipment / Documentation • Original invoice from 2021 available • Operating manual available • Unit is currently still connected • On-site inspection possible by appointment Location 71282 Hemmingen The unit can be inspected on-site. Since it is currently still connected, the condition of the unit and the existing technology can be directly assessed on-site. Price €29,000 (negotiable)

Condition: used, axle configuration: 2 axles, first registration: 01/1999, total length: 5,700 mm, total width: 1,860 mm, total height: 1,860 mm, Transmission: Manual gearbox GVW: 2.000 kg Emission class: Euro 1 Tyre tread remainder on axle 1: 50% Dodpfx Aey Hw Swok Aocp

Condition: new, mileage: 500 km, power: 294 kW (399.73 HP), axle configuration: 4x2, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 94,300 mm, total width: 25,500 mm, total height: 40,000 mm, loading space length: 72,800 mm, loading space width: 24,800 mm, loading space height: 26,700 mm, Equipment: ABS, EBS, air conditioning, For vehicle inquiries, please contact Mr. Seidel (at tel. ). Iveco S-Way AD190S40/P Cab Design AD MY, engine 400 C9 Cursor 9 400 hp EuroVI, transmission TX-12M 12-speed HiTroniX, automated, air suspension rear axle, wheelbase 5700 mm, Alcoa aluminum rims, Mirror Cams, roof flap, mechanical design, warm water circulation pump, suitable as a parking heater, residual heat from coolant is used and circulated in the system, signal horn behind bumper (compressed air), reinforced parabolic spring on the front axle, front axle weight variant 8,000 kg / rear axle 11,500 kg, rear axle ratio: i 3.08, trailer socket for 24 Volt operation, 15-pin, trailer coupling, manufacturer Ringfeder, trailer coupling, 40 mm, 130 kN, electrical connection for body on the left side of the frame, axle load display in the cluster, Formula Blue IC 377, fuel tank 390 liters, aluminum, infotainment 10 TFT display, leather steering wheel, air conditioning fully automatic, air suspension for cab, sun visor for side window, driver and passenger side, driver's seat HI-Comfort, adjustable in multiple ways, air-sprung, integrated headrest and integrated height-adjustable safety belt, lumbar support, with 3-stage cooling or heating function. Headlights front LED, LED rear lights, fog lights including cornering/turning lights, and more. _____ Curtainsider body: Junge MNPXCOS073LB, dimensions of cargo area LxWxH in mm: 7,280 x 2,480 x 2,670 (through-loading height 2,600mm), tail lift: DHOLLANDIA DHLM 2412 3024 (2,000Kg) Dedpfxoyfvtcs Ak Aocp Upon request, we will prepare a leasing or financing offer for you. Mr. Seidel (tel. ) will be happy to assist you. You can find more information on our website: ... Errors, changes and prior sale reserved !!! - ESP, navigation system, particulate filter, virtual side mirrors Cab: Local transport = Further information = Suspension: Air suspension Engine displacement: 8,710 cc GVWR: 18,000 kg Please contact Tobias Ebert for further information.

Condition: good (used), Year of construction: 2018, operating hours: 3,869 h, load capacity: 1,400 kg, lifting height: 2,350 mm, fuel type: electric, mast type: duplex, construction height: 2,000 mm, Manufacturer + model: TOYOTA SWE 140 S Mast: 2W2350 ID: 25091.0187 Category: Used Mast: 2W2350 Lowered height: 2000 mm Dcjdpszuudkefx Ak Ajp Lifting height: 2350 mm Capacity: 1400 kg Year: 2018 Hours: 3869 hours Capacity: 24 V Options: VERY unique, WIDE TRACK equipped with a PALLET changer!! = Spreader / Rotator / Clamp (Reach from 560 to 1700 mm) - PROPORTIONAL lift and lower valves - Width between the support legs: 1280 mm!!

Condition: excellent (used), Part suitable for: cars Technical condition: very good Optical condition: very good Dcedpfjx N R R Eox Ak Asp

Condition: good (used), mileage: 463,136 km, power: 357 kW (485.38 HP), first registration: 09/2022, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,230 mm, total width: 2,550 mm, total height: 3,850 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, tachograph, traction control, = Additional Options and Accessories = - 2nd Diesel Tank - Heated Mirrors - Digital Tachograph - Fixed - LED Lamp - Manual - Radio/Cassette - Sleeper Cab - Lane Keeping Assist - Fabric = Notes = Number of axles: 2, Configuration: 4x2, Tare weight: 6870 kg, Gross vehicle weight: 20000 kg, Total tank capacity: 1180 liters, 2nd Diesel Tank, Height of fifth wheel coupling: 114 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Suspension type: Air suspension, Type of cab: Sleeper cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/Cassette, Color: White, Heated mirrors, Lighting type: LED lamp, Lane Keeping Assist, Climate control, Bluetooth, Engine power: 357 kW (479 Hp), Engine capacity: 12882 cc, Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission type: ZF, Gears: 12, Power steering, ABS, ASR, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual = Additional Information = Transmission Gearbox: ZF, 12 gears, Automatic Axle Configuration Tire size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 8 mm; Tire tread depth right: 13 mm; Suspension: Leaf suspension Axle 2: Double tires; Tire tread depth left inner: 6 mm; Tire tread depth left outer: 8 mm; Tire tread depth right inner: 7 mm; Tire tread depth right outer: 7 mm; Suspension: Air suspension Weights Tare weight: 6,870 kg Payload: 13,130 kg GVW: 20,000 kg Condition Technical condition: good Optical condition: good Damages: none Number of keys: 2 Financial Information Leasing price: €585 per month (default, 60 months); Inquire for more information and conditions Dodpfx Aozu I Dqjk Ajcp Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealers. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands from different years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and send an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, mileage: 1,001 km, first registration: 01/2011, color: black, driver cabin: other, gearing type: other, Year of construction: 2011, Vehicle location: Bovenden, hydraulic cross-locking system. Superstructure: 21-ton VDL roll-off system S 21-5500 for containers up to 6m, DAIMLER-BENZ Actros 2646 truck, 6x4 chassis with a 3900mm wheelbase! 21-ton VDL roll-off system S 21-5500 for containers up to 6m. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Dcsdpfs Ah E Rdox Ak Asp

Condition: used, mileage: 370,000 km, power: 375 kW (509.86 HP), first registration: 09/2025, fuel type: diesel, number of seats: 81, gearing type: automatic, emission class: euro6, brakes: retarder, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, power assisted steering, traction control, trailer coupling, = Additional options and accessories = - Adaptive cruise control - Adjusted for handicapped - Autoradio - CD - Climate control - Double glazing - DVD - EBS - Electrically operated mirrors - GPS navigation - Heater - Hydraulic power steering - Individual air cooling - Individual lighting - Kitchen - Lane change support - LED headlights - Light alloy wheels - Multifunction steering wheel - Portable radio set - Refrigerator - Reverse camera - Sun visor - Tachograph Djdpo Ah Dvysfx Ak Aecp - TV/Video = More information = AdBlue system: Yes Engine capacity: 12.809 cc Dimensions (LxBxH): 1400 x 255 x 400 cm Make of engine: Mercedes Benz Availability: in stock Bus refrigerator number: 1 Number of microphones: 2

Condition: new, GMN TSSV 170 s - 12000 / 18 A high-speed spindle, serial no. 287832, unused, in original packaging, 100% functional. Scope of delivery as shown in the photos. ATTENTION: Please request a separate quote for packaging and shipping costs! Dcsdoi Eacaepfx Ak Aep

Condition: ready for operation (used), Mitsubishi HA23NC-S servo motor, serial number: 14004 + OSA253S2 encoder, serial number: J4AVU426G7V, used, normal signs of wear, 100% functional, scope of supply as shown in the photos. Dcjdji D I Nuepfx Ak Aep

Condition: ready for operation (used), Mitsubishi HA33C-S synchronous servo motor, serial number: M54644060 + Tamagawa OSE 12.5KN-6-12-0 rotary encoder, serial number: 7945T, used, normal signs of wear, 100% functional, scope of supply as shown in the photos. Dodei D I N Uepfx Ak Ascp

Condition: ready for operation (used), Mitsubishi HA33NC-S servo motor, serial number: 15017 + OSA253S2 encoder, serial number: J4AVU492R6S, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Djdpfx Akei D I Rgo Ajcp

Condition: good (used), mileage: 646,540 km, power: 353 kW (479.95 HP), first registration: 02/2021, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 6x2, wheelbase: 4,780 mm, fuel: diesel, brakes: retarder, color: blue, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 9,800 mm, total width: 2,550 mm, total height: 3,930 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, retarder, seat heater, tachograph, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Fixed - High roof - LED lamp - Manual - Radio/cassette - Lane departure warning system - Fabric - Auxiliary braking system = Notes = Number of axles: 3, Configuration: 6x2, Tare weight: 10040 kg, Gross vehicle weight: 26000 kg, Total tank capacity: 640 liters, Tow hitch, Axle pin diameter: 40 DIN, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 393 tons, Suspension type: Full air, Cabin type: High roof, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: Blue, Heated mirrors, Lighting type: LED lamp, Lane departure warning system, Air conditioning, Seat heating, Bluetooth, Engine power: 353 kW (473 Hp), Engine displacement: 11120 cc, Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission type: ZF, Gears: 12, Auxiliary braking system, Retarder brand: Intarder, Power steering, ABS, ASR, Rotation direction: 1x20, System length: 78 cm, System type: SDG, Central locking, Seat configuration: 1+1, Seat cover: Fabric, Seat adjustment: Manual, STEERABLE REAR AXLE // INTARDER // LAST AXLE STEERING // DIESEL = Further Information = Transmission Transmission: ZF, 12 gears, Automatic Axle Configuration Tire size: 315/70R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Steerable; Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Axle 2: Double tires; Tire tread depth left inner: 3 mm; Tire tread depth left outer: 5 mm; Tire tread depth right inner: 4 mm; Tire tread depth right outer: 4 mm Axle 3: Lift axle; Steerable; Tire tread depth left: 6 mm; Tire tread depth right: 5 mm Weights Unladen weight: 10,040 kg Payload: 15,960 kg Dedpfx Asy Tiqxsk Ajcp GVW: 26,000 kg Functional Loading platform height: 109 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €688 per month (default, 60 months); Ask for further information and conditions Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here, you can choose from a constantly changing inventory of 1200 used trucks, tractor units, and trailers. Our range includes all European brands and model years, and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: used, Weiss Type: SWT 200/400-S Weiss spray and splash water testing cabinet The cabinet is used to test the ingress of water into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system reduces water consumption to a minimum. Features: Glass door with wiper Pneumatic drive of the swivel nozzle Adjustable swivel angle Interchangeable swivel nozzles Nozzle holder can be swivelled and replaced Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress: Max. load with test specimen (evenly distributed over the area) Permissible test specimen weight for test specimen carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection tests: Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data: Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 KW Rated current 5.0 A Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) Dcjdpfx Akozil T Eo Aep We will be happy to answer any further questions you may have by telephone.

Condition: used, Vötsch Type: VC³ 4018/S Vötsch VC³ 4018/S Climate Test Chamber, Li-Ion, CO/CO₂ -42 to +150 °C, 400 V, Air-cooled For sale is a temperature and climate test chamber from the renowned German manufacturer Vötsch Industrietechnik GmbH, type VC³ 4018/S, manufactured in 2012. The unit is specifically equipped for testing lithium-ion batteries and features CO monitoring and CO₂ inertization to enhance operational safety. Important Note: Due to this safety equipment, the test chamber is software-limited to a temperature range of -42 °C to +150 °C. The chamber is ideally suited for: Li-Ion battery tests Electronics and component testing Temperature and climate stress tests Development and quality assurance tasks Technical Data: Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Test chamber volume: 190 liters Feedthrough installed as standard equipment R1: ® 125 mm L1: © 50 mm Data for temperature tests: Temperature range: -42 °C to +150 °C Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature homogeneity in space: ± 0.5 to ± 1.5 K Temperature change rate Heating: 4 K/min Cooling: 4 K/min Max. heat compensation: 2300 W Data for climate tests: Temperature range: +10 to +95 °C Dew point range: -3 to +94 °C Humidity range: 10 to 98 % RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature homogeneity in space: ± 0.5 to ± K Humidity deviation over time: ± 1 to ± 3 % RH Heat compensation: 400 W Data for operation: Test chamber lighting: Halogen bulb 2 x 24V, 50W 3/N/PE AC 400V ± 10% 50 Hz Rated power: 4.1 kW Rated current: 14 A Refrigerant: R-404A Weight: 470 kg For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: Dodpfx Aezimfvsk Aocp 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2000, machine/vehicle number: ET253, Used P.E. 4 station labeller machine - Year 2000Technical Specifications & Performance DataThis automatic adhesive labeling machine is engineered for precise, repeatable label application across multiple bottle formats in beverage production and industrial packaging environments. Manufactured by P.E. Labellers, the UNIVERSAL/MASTER/S model from 2000 features four coordinated stations managed by a PLC control system, delivering consistent positioning and high-quality results typical of second hand bottling equipment.Manufacturer: P.E. LabellersModel: UNIVERSAL/MASTER/SYear: 2000Labeling method: Adhesive (pressure-sensitive)Number of stations: 4Control system: PLCContainer types: Designed for PET and Glass bottle handlingFormat compatibility: Supports multiple bottle formats with straightforward changeoversMachine category: Labeling MachineAdvanced Automation & Control SystemsThe PLC-driven architecture coordinates the four operational stations to maintain precise timing, label feed, and application pressure. The automation platform enables stable performance on varied bottle formats, helping reduce waste and improve uptime typical of a used bottling line setup. Safety interlocks and guarding support operator protection while preserving fast access for adjustments and cleaning.PLC-managed labeling cycle for repeatable accuracyProgrammable parameters for label application and timingOperator-friendly controls for setpoint changesSafety guarding and interlocks around moving areasProduction Line Integration CapabilitiesThe P.E. Labellers UNIVERSAL/MASTER/S integrates easily into an existing used bottling line or can operate as a standalone labeling module. Its flexible bottle handling accommodates diverse formats common in beverage production. Integration with upstream filling and downstream inspection or packing systems is straightforward via standard conveyor interfaces and signal exchange.Inline or standalone operationCompatible with PET and Glass containersAdaptable to various bottle geometries and sizesSupports format changeovers for multi-product environmentsMachine Condition & Maintenance HistoryThis second hand labeling machine is a solid option for industrial packaging projects seeking reliable adhesive label application without the cost of new machinery. Typical overhauls may include label head maintenance, belt and bearing checks, and PLC parameter optimization as part of standard commissioning for beverage production environments.Operational Performance & VersatilityEngineered for pressure-sensitive labels, the four-station configuration ensures precise placement and stable adhesion on PET and Glass bottles. Its design supports consistent results across different bottle formats, making it well-suited for diversified bottling operations handling seasonal or multiple SKUs.Consistent label placement across multiple formatsSuitable for PET an... Djdpfxo Adt Aue Ak Aocp

Condition: used, Year of construction: 2010, Panel saw Dedpj Adzc Ajfx Ak Ascp Manufacturer: Nardello Model: Elegance S/N2155 Year of manufacture: 2010 Technical specifications: - with infeed and outfeed roller conveyor - Minimum width: 60 + 60 mm - Maximum width: 450 + 450 mm - Length: 350 - 2,000 mm - Panel thickness: 15 - 30 mm Note: The technical specifications and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: new, Year of construction: 2025, 4-knife cutterhead for optimal planing results Smooth operation thanks to the precision unit and the heavy cast-iron construction Front steel infeed roller with helical gearing for optimal feed rate Satin-finished steel outfeed roller, optionally with a rubber roller in the outfeed The work table is mounted on four large columns, ensuring maximum stability under all working conditions. The thickness table adjustment is done via a handwheel with a numerical display for the set planing height (accurate to 1/10 mm) Standard with two feed speeds, comfortably selectable from the operator's side Powerful industrial motor Stable steel and cast iron construction Equipment details: Work table Mounted on four large spindles, which ensure maximum stability under all working conditions A special lifting device ensures that the table position is maintained perfectly, even without locking TERSA planing cutterhead No more adjustment and screwing Planer knife change in seconds Self-locking Particularly quiet Thickness table adjustment on S 41 elite s via a handwheel with a numerical display for the set planing height (accurate to 1/10 mm) Dimensions and weights Length approx. 900 mm Width/Depth approx. 1070 mm Weight approx. 361 kg Dust extraction connection Dust extraction nozzle diameter for thicknessing 120 mm Drive power Main motor 5 kW Installation information Space requirement Length 1070 mm Space requirement Width/Depth 900 mm Space requirement Height 1100 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Dodpfx Aed Hx Hnok Ascp Machine body Length 1040 mm Machine body Width/Depth 900 mm Length 3000 mm Width 1600 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thicknessing Thickness table Length 423 mm Thickness table Width 775 mm Working height min. 3 mm Working height max. 240 mm Working length min. 180 mm Maximum chip removal 5 mm Electrical data Connection voltage 400 V Planer cutterhead Type TERSA Diameter 95 mm Number of planer knives 4 pcs Speed 5000 min¯¹ Planer width max. 410 mm Feed Speed 6/12 m/min

Condition: used, Year of construction: 1990, Technical details: Pressure: 63 t distance between columns: 200 mm stroke: 150 mm dayligth: 430 mm no. of strokes: 400 Hub/min T-slots H 12 650: 18 mm hole in table: 420x160 b x l mm ram surface area: 650 x 450 mm control: Wanske Tronicpress CNC passage of columns: 550x540 mm tank: 200 l stroke of ram - fixed: 100 mm ram diameter: 40 mm table height over floor: 1000 mm table: 600x450 mm table height over floor with metal base stand: 880 mm total power requirement: 30 kW weight of the machine ca.: 3,9 t Hydraulic automatic punching press for precision work (high-speed press) - for punching, drawing, pressing, minting, bending, riveting, straightening, assembling - with hydraulic gripper feed type HS 150 and 7-roller straightener (moving) - Normal strips of approx. 0.4mm - 2.5mm thickness x approx. 160mm width, as well as narrow strips up to approx. 4mm can be processed. Feed length can be adjusted as required via the control unit. - with ram round column guide - with automatic central lubrication - High-speed: up to 400 strokes min-1 - motorized adjustable fixed stop (bottom can be adjusted by hand/motorized) - Operating modes such as continuous stroke and/or single stroke Equipment: - 1x hydraulic unit - 2x control cabinets Dcodpju Icxqsfx Ak Asp *

Condition: used, Year of construction: 2003, Technical details: bore capacity in steel (diameter): 25 mm throat: 255 mm bore stroke: 140 mm spindle taper MT: MK 3 spindle speed:: 105 - 2980 / 8step U/min Distance spindle/table max.: min.: 350 / max.: 950 mm table clamping surface:: 420 x 270 mm table rotating: 360 ° table swivable approx.: 30° links / rechts drill table adjustment: 600 manuell mm column diameter: 100 mm Dsdpju Idhysfx Ak Aecp current- max.: 400 V / 50 Hz A total power requirement: 0,9 kW weight of the machine ca.: 180 kg dimension machine xH: 0,6 x 0,5 x 1,8 m Equipment: Röhm quick-action chuck 3 - 16mm Switchover for clockwise/anticlockwise rotation for thread cutting *

Condition: used, Technical details: x-travel: ca.1000 mm y-travel: 400 mm z-travel: 420 mm control: Siemens Sinumerik 805/810 thread cutting up to max.: M 22 bore capacity in St 60 - full boring: 25 mm milling area: Leistung in St 60:150 mm sawing stroke: ca. 55mm mm range of revolutions per minute - continous: 20-6000 U/min Number of working hours: manual 26180 h tool turret: 12 Plätze/places tool taper: SK 40 total power requirement: 18 kVA weight of the machine ca.: 5,0 t machine dimensions LxWxH: 2,9x2,5x2,8 m transport measurements machine: 2,4x2,6x2,75 m Dcjdpfsu Idnmex Ak Aep Equipment: - special equipment/device ( modulating clamping system) for milling jobs of profile materials with an automatic longtitudinal cutting to length device for workpieces via circular saw module. (without functionality) - hotrizontal tool clamping ( force fitted) with vise clamping system and parallel ledges.(momentarily approx. 80mm) - tool changer type Chiron - basket tool changer - tool clamping mechanically locked, infeed force 5000N - swarf conveyor make Knoll - loading and unloading system FMB LM RP 3000 The machine is not fuctional. On sale as is for a small budget i.D. *

Condition: new, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 2018w25-000298, overall weight: 3 kg, total length: 180 mm, volume flow: 2.5 m³/h, operating pressure: 10 bar, final pressure: 10 bar, power: 6 kW (8.16 HP), input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, Unused stock item: KSB Calio S 25-40. Highly efficient heating and drinking water pump for energy-saving use in heating and drinking water systems. Its compact design and high efficiency ensure a durable and cost-effective solution. Type: Calio S 25-40 Machine number: 29134756 Product number: 2018w25.000298 Nominal diameter: DN 25 Maximum head: 4.9 m Voltage: 230 V Dedpfx Aov Tm Hfjk Ascp Efficient, variable-speed circulation pump Integrated control system for optimized performance

Condition: used, HEAVY-DUTY SHELVING   Pallet racking / Storage racking / Industrial racking   Heavy-duty shelving with galvanized grating support Dimensions approx. 2,000 × 800 × 2,200 mm (W × D × H) Steel shelving with orange-colored crossbeams and side protection grille   For sale is a used heavy-duty shelving unit in a sturdy steel construction with galvanized upright frames, orange steel crossbeams, and grating support.   The shelving is suitable for storing materials, tools, spare parts, components, and storage goods in warehouses, workshops, and industrial facilities.   Technical data:   Type of equipment: Heavy-duty shelving / Pallet racking / Storage racking Manufacturer: unknown Design: Boltless steel shelving system Number of shelf bays: 1 Material: Steel / Metal Condition: used   Dimensions:   Overall width: approx. 2,000 mm Overall depth: approx. 800 mm Overall height: approx. 2,200 mm   Shelving design:   Galvanized steel uprights with hole grid Orange steel crossbeams 1 storage level with galvanized grating support Upper crossbeam level without floor support Side protection grille on one side of the shelving Lateral frame bracing Footplates for floor mounting Height-adjustable crossbeams via bolt connections   Load capacity:   The permissible bay load and shelf load are not documented. A binding load capacity specification cannot therefore be provided.   Equipment:   Heavy-duty shelving steel construction Galvanized upright frames Dcedpfx Ae Aa Ni Aek Asp Orange-colored crossbeams Metal grating support Side protection grille Diagonal and horizontal bracing Mounting feet / footplates Equipment as shown in the images   Areas of application:   Warehouses Industrial warehouses Workshops Spare parts storage Material storage Production facilities Mechanical engineering Industrial equipment   Dimensions / Transport:   Dimensions assembled (W × D × H): approx. 2,000 × 800 × 2,200 mm Weight: estimated approx. 100–150 kg   The dimension specifications are based on on-site information. The actual weight has not been determined. The shelving can be disassembled for transport.   Condition:   Used Visual condition as shown in the images Signs of wear and tear are present.   The permissible load capacity and the inspection status are not documented and must be checked by the operator before use.   Scope of delivery:   1 × Heavy-duty shelving / Pallet racking Upright frames and steel crossbeams as shown in the images 1 × Storage level with grating support 1 × Side protection grille Otherwise, scope of delivery as shown in the images.   Collection or shipping by freight carrier possible by arrangement. Dismantling and loading must be agreed in advance. Subject to changes, errors, and prior sale.   We will be happy to answer any further questions by telephone.

Condition: used, TIRA Climate simulation chamber / walk-in climate test chamber TIRA TCZ 4022 S -2K Air-cooled | -40 to +140 °C | Refrigerant R449A For sale is a used, walk-in climate simulation chamber from the manufacturer TIRA. The system consists of an insulated test chamber, an air handling unit, external humidification, a machine unit and a control cabinet. It is used for temperature and humidity testing. Technical data: Manufacturer: TIRA Type: TCZ 4022 S -2K Cooling type: air-cooled Temperature range: -40 to +140 °C Temperature stability, supply air: over time ≤ ±0.5 °C; spatially ≤ ±1.0 °C Heating / Cooling: approx. 2 K/min each (-30 to +85 °C, without test item and thermal load) Climate range: +10 to +90 °C Humidity: 10 to approx. 95 % RH Dew point: +5 to +89 °C Humidity stability, supply air: over time ≤ ±2.5 % RH With heat compensation up to 16 kW: +15 to +80 °C; 15 to approx. 80 % RH Dew point: +10 to +74 °C Test chamber (W x D x H): approx. 2260 x 4648 x 2260 mm External dimensions: approx. 2660 x 6460 x 2800 mm Door opening (W x H): 2260 x 2260 mm Climate module KB 127: 1700 x 800 x 1400 mm Control cabinet: 800 x 500 x 2000 mm Power connection: 400 V, 3/PE/N, 50 Hz Rated power: 95 kW; Rated current: 150 A Fuse rating: 200 A, slow-blow Total weight according to specifications: approx. 5834 kg Equipment: Stainless steel interior and floor Double-wing door with viewing window approx. 1000 x 1000 mm Supply air at the top / exhaust air at the bottom on the rear wall Electric heating, direct cooling and dehumidification Dcodpfx Asz Sn Uvek Aep Bitzer 6G-30.2Y; Refrigerant R449A; Oil SEZ 32 Steam humidifier EDB 40 4 test chamber spotlights à 500 W Insulation: 80 mm PUR and 120 mm mineral wool Floor load: 15,000 N/m²; Wheel load: 1,500 N/wheel (≥ 4 cm²) Application areas: Temperature and climate testing Environmental simulation Material and component testing Quality assurance and development Condition: Used Optical condition according to pictures Scope of delivery: TIRA TCZ 4022 S -2K with associated components as shown in the pictures Items not explicitly mentioned are not part of the sale. Shipping by freight forwarder is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: good (used), Code: 0688 Brand: FRAVOL Model: A 16/S Edgebander for straight and shaped panels, for wood edges, veneer, Pvc, plastic laminate, etc. Technical data: Edge height mm 10/60 Edge thickness mm 0,4 - 1,2 Min edging radius mm 20 Dcedpfj Afnpljx Ak Ajp Power Watt 2500 Shear for roll cutting Compressed air 5 atm Overall dimensions mm 1300 x 1000 x 1100 h Weight kg 260