Used Multipal S for sale (9,740)

Condition: like new (used), Year of construction: 2011, operating hours: 1,525 h, functionality: fully functional, machine/vehicle number: W09SSA220BLSF8002, fuel: diesel, cubic capacity: 6,600 cm³, type of cooling: water, stroke length: 127 mm, Equipment: crane, For sale is a well-used SSA 700 log splitter. It is fully operational and in mint condition. The machine is being sold because our business is being remodeled and reorganized. It will be available starting March/April 2025. The machine includes a Bindenberger windshield washer. Fgodpfsvy Uudox Ah Uji Price upon request.

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, welding fume filter, welding fume extraction, flue gas suction fan -Manufacturer: Coral, dry grinding dust extraction filter system type GRINDEX Fgedpfx Aorw A U Ish Usi -Power: 0.75 kW / 2810 rpm -Individual components/technical data: see photos -Dimensions: 855/750/H1085 mm -Weight: 120 kg

Condition: as good as new (ex-display), Year of construction: 2025, S&F drum chipper type ATH 220x530/3 Demonstration machine / trade fair machine / new machine Solid design with long service life Feed height: 200 mm Feed width: 500 mm Number of chipper knives: 2 pieces Number of counter knives: 1 piece Rotor diameter: 520 mm (solid steel rotor) Number of feed rollers: 3 pieces Fjdpjw I R Rnefx Ah Uegi Throughput rate: up to approx. 20 rm/h * Chipping length: approx. 30 mm Chipper drive power: 45 kW or on request Feed roller drive power: 2 x 2.2 kW Operating/control voltage:400/220 V, 50 Hz Weight: 2,600 kg *depending on chipper length, kW main motor, number of knives, feed S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Year of construction: 2023, condition: new, Neu Capsule Check Weigher with high operation speed up to 120 000 cap/hour_ (Model CAP 16120), 90 000cap/h, (Model CAP 12090), 60 000 cap/h (Model 8060); Applicable Size: 000, 00,0, 1, 2, 3, 4, 5; Fgodpfx Ahoc Rn Uae Uei Weighing Range: 20 - 2000 mg; Power Requirement: 20 V, 1PH, 60 HZ (max. 1,5 KVA); Auto Tare Cycle: 1 bis 60 min;

Condition: used, axle configuration: 3 axles, first registration: 05/2004, color: other, Year of construction: 2004, Empty weight: 7.300 kg Fodpowzx T Sjfx Ah Usgi Axle 1: left 8 mm right 8 mm Axle 2: left10 mm right 10 mm Axle 3: left 8 mm right 8 mm

Year of construction: 2015, condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: -230 V -0,7 A Fjdpfx Ahjk Eakvo Uegi -50 Hz -IP 65

Condition: ready for operation (used), T&S ConturoMatic T2 Contour Measuring Device Optical-incremental measuring system Measuring speed 0.1...3.0 mm/s Positioning speed up to 25 mm/s Fgjdswak Nvspfx Ah Uei Measuring point spacing 0.5...25 µm Accuracy ±(0.9+L(mm)/100) µm Radius accuracy ±0.005% of the nominal value at R 12.5 mm Distance accuracy ±(1.2+L(mm)/100) µm Angle accuracy ≤ 30'' Technical data has been adopted. You are welcome to visit us for a viewing. We would be happy to arrange a cost-effective shipping service for you. You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description purposes. Deviations from technical specifications and errors in the description of the item may occur and are reserved.

Condition: used, Metal detector for conveyor belt, all metal detector, tunnel metal detector, metal detector Fgsdpfxsrz Syys Ah Uei -Manufacturer: SS Temafa, metal detector all-metal search system -Metal detector: SS TFX 4000/440 -Detector opening: Ø 440 x 530 mm -Control: Temafa MSG 4-FF -Individual components: see photos -Transport dimensions: 750/530/H790 mm -Weight: 96kg

Condition: like new (used), Year of construction: 2017, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 20161259/2017, Filling system for all liquids. The system was used to fill disinfectant bottles. The system was put into operation in 2017 and is still as good as new, having only been in operation for a few hundred hours. Fedpfxovmnkre Ah Uogi The article produced was only sold during Corona. It is also possible to purchase the complete product. Unfortunately there are only a few photos, but we would be happy to send you a video of the system in operation.

Condition: good (used), Equipment: type plate available, Used stainless steel container/pressure vessel Last use: Pharmacy, cosmetics Item number: 10806 Volume: 5700 liters Type: Vertical on 4 feet Height of feet: 1700mm Material (wetted parts): 14571 / AISI 316 Cover: Ø 720mm Design: Single-walled Operating pressure according to type plate: -0.3/+3 bar Tank dimensions: Outer diameter: 1600mm Overall width: 2200mm Overall length: 2200mm Total height: 2940mm Cylindrical height: 2500mm materials: Fjdpfx Ahjr A Embj Ujgi Interior: 14571 / AISI 316 Outer parts: 14301 / AISI 304 Equipment: Nameplate: Yes Sight glass

Condition: good (used), Progres Industriel Jones & Lamson lathe Type: Senna 1H Turning diameter bed: 520 mm Turning diameter bed max: 780 mm Turning diameter support: 380 mm Turning length: 3500 mm Spindle bore: 70 mm Speed: 1800 RPM Diameter faceplate type 3: 315 mm Diameter faceplate type 4: 310 and 440 mm Included tools, documentation and coolant pump Dimensions: 525x115x134 cm LxWxH Fjdpfx Aoncc H Hjh Uegi

Year of construction: 2015, condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: Fsdpfxolatz Ds Ah Ujgi - 230 V - 0,7A - 50 Hz - IP 65 Inclusion dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Belt length: 2000 mm

Condition: used, Metso GP300S Funnel Fgodsv Rn Dgspfx Ah Uei

Condition: good (used), Static Mixer, Disposable Mixer, Plastic Spiral Mixer -Manufacturer: tsi, Static mixer SULZER QUADRO MGQ 10-19D 15 pieces -Version with Luer-Lock attachment for dispensing needles -Industrial standard connection can also be used for other cartridge systems -Thread: MGQ Series 7/8" - 9 UNC coarse thread -Quantity: 3 bags with 15 pieces each available -Distribution/Price: per bag, minimum order 2 bags -Bag dimensions: 190/130/H40 mm -Weight: 0.2 kg/bag Fgsdpfx Ahsu Aifts Uji

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 12,000 W, laser wavelength: 1,060 nm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness aluminum (max.): 50 mm, sheet thickness brass (max.): 50 mm, sheet thickness copper (max.): 50 mm, table length: 3,100 mm, table width: 1,550 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 150 mm, positioning speed: 169 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 1,800 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, compressed air connection: 14 bar, overall weight: 8,000 kg, total length: 10,000 mm, total width: 2,550 mm, total height: 2,500 mm, warranty duration: 12 months, space requirement height: 2,500 mm, space requirement length: 6,200 mm, space requirement width: 5,800 mm, Equipment: cooling unit, safety light barrier, Our space-saving model: G3015 HF mini 12KW fiber laser cutting machine with side-mounted shuttle table The HF mini is our space-saving, very compact fiber laser cutting machine with a side-mounted shuttle table. Your perfect entry into the professional production of laser parts and series production. This machine is ideal for steel fabricators, sheet metal processors, and series production companies that want to cut up to 50mm of steel with 12kW laser power and minimize post-processing of the parts. Thanks to its high energy efficiency, this machine can save up to 25% energy compared to a comparable plasma system or a CO2 laser system with the same cutting power. Alternatively, this machine can also be equipped with a 20kW laser source. This increases the cutting speed by up to 50%. When replacing an old CO2 laser machine, you can even apply for government funding of up to 15% of the investment. Contact us! German customer service in the Rhineland region of North Rhine-Westphalia with a 400m² spare parts warehouse. German-speaking telephone and on-site support with short response times. All of our machines are installed and serviced by us. 80% of the machine technology is made from German or European components. 1.5 x 3m cutting area X-axis [mm]: 3100 Y-axis [mm]: 1600 Z-axis [mm]: 400 Maximum speed [m/min]: 169 Acceleration: 1.7 g Precision [mm]: 0.03 Repeatability [mm/m]: 0.02 Dimensions Length [mm]: 6200 Width [mm]: 5800 Height [mm]: 2500 Maximum sheet weight [kg/table]: 2150 Available laser power: 6 kW, 12 kW, 20 kW, 30 kW Cutting capacity at 6 kW Steel - 25 mm, stainless steel - 18 mm, aluminum - 18 mm Cutting capacity at 12 kW Steel - 50 mm, stainless steel - 50 mm, aluminum - 50mm • Side-mounted shuttle table ideal for small production halls • Fully enclosed, ensures laser safety • Compact design saves shipping costs and reduces installation time • Better accessibility thanks to the full-length side sliding door • Ergonomic loading and unloading for small workpieces • High dynamics and productivity thanks to the powerful controller and motors • Integrated control cabinet and laser source with maintenance-friendly access • Fast service response thanks to "Remote Service" • Fully enclosed machine with OD5+ laser safety glass windows • Small footprint • Thanks to the adjustable control panel, front door, and side sliding door Higher dynamics & productivity • Thanks to the optimized machine bed and the extruded aluminum gantry, equipped with the fast, real-time Han's 901 (Rexroth) controller and powerful Rexroth motors, the HF Mini S achieves very high speeds and acceleration. Component Configuration and Selection Control System: Han's 901 (Rexroth, Germany) Servo Driver: Rexroth, Germany Cutting Head: Precitec, Germany Linear Guide: Hiwin, Taiwan (China) Rack: Güdel, Switzerland Gearbox: Güdel, Switzerland Servo Valve: Lanny, Germany Fodpev Nzvyefx Ah Uogi Machine Frame: Han's, China Gantry: Han's, China Z-Axis: Han's, China Shuttle Table: Han's, China

Condition: good (used), Equipment: type plate available, Used stainless steel container with agitator Last use: Pharmacy, cosmetics Item number: 10801 Volume: 5700 liters Type: Vertical on 4 feet Height of feet: 1700mm Material (wetted parts): 14571 / AISI 316 Cover: Ø 720mm Design: Single-walled Operating pressure according to type plate: -0.3/+3 bar Tank dimensions: Outer diameter: 1600mm Overall width: 2200mm Overall length: 2200mm Total height: 2940mm Cylindrical height: 2500mm materials: Interior: 14571 / AISI 316 Outer parts: 14301 / AISI 304 Fsdper A Emxefx Ah Ujgi Equipment: Nameplate: Yes Sight glass Lateral agitator

Condition: new, Make: S&F GmbH Type: MFB-500/5 Belt width: 500 mm Centre distance (A-A): 5,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: worm gear motor Fedpfx Ahew Ad Rrs Uogi Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.1 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 450 kg Machine colour: RAL 6009 Fir green Suitable for the following bulk materials, among others: Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: good (used), metal detector S+S Fedpfx Ahstu Nnuo Uogi for sorting metal parts from a material flow. The material passes through a chute and the metal parts exit from another chute. chute inlet 70mm . sold with stand, height 2m.

Year of construction: 2006, condition: excellent (used), Device is functional and was only used for experimental purposes Fgsdpfxjh Im Eqe Ah Uoi Funnel is included

Condition: used, High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan -Motor power: 0.45 kW -Speed: 2800 rpm -Volume output: 140 m³/h Fgodpfxod R Smvo Ah Uji -Pressure increase: PA -Connection input: Ø 160 mm -Connection output: Ø 80 mm -Number: 1x fan available -Price: per piece -Dimensions: 295/400/H460 mm -Weight: 16 kg

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, laser wavelength: 1,060 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, table length: 3,100 mm, table width: 1,550 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,550 mm, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 2,000 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, compressed air connection: 14 bar, overall weight: 7,000 kg, total length: 6,000 mm, total width: 2,500 mm, total height: 2,500 mm, warranty duration: 12 months, space requirement height: 2,500 mm, space requirement length: 6,000 mm, space requirement width: 2,500 mm, Equipment: cooling unit, safety light barrier, G3015 HF Mini S 6KW Fiber Laser Cutting Machine The HF Mini S is a high-quality, very compact fiber laser cutting machine. Your perfect entry into laser part production. This machine is ideal for small steel fabricators and sheet metal processors who want to cut up to 25mm (with 6kW steel laser power) and minimize post-processing of the parts. Thanks to its high energy efficiency, this machine can save up to 25% energy compared to a comparable plasma system with the same cutting power. Alternatively, this machine can also be equipped with a 12kW laser source. This increases the cutting power to 50mm steel, stainless steel, or aluminum. German customer service in the Rhineland region of North Rhine-Westphalia with a spare parts warehouse on 400m² of storage space. German-speaking telephone and on-site support with short response times. All of our machines are installed and maintained by us. 1.5 x 3m cutting area X-axis [mm]: 3100 Y-axis [mm]: 1550 Z-axis [mm]: 180 Maximum speed [m/min]: 120 Acceleration: 1.5 g Precision [mm]: 0.03 Repeatability [mm/m]: 0.02 Dimensions Length [mm]: 6200 Width [mm]: 2500 Height [mm]: 2500 Maximum sheet weight [kg/table]: 2150 Available laser power: 3 kW, 6 kW, 12 kW Cutting capacity at 6 kW Steel - 25 mm, stainless steel - 18 mm, aluminum - 18 mm Cutting capacity at 12 kW (additional charge) Steel - 50 mm, stainless steel - 50 mm, aluminum - 50mm • Fully enclosed, ensures laser safety • Compact design, saves shipping costs and reduces installation time • Better accessibility thanks to the full-length sliding side door • Ergonomic loading and unloading for small workpieces • High dynamics and productivity thanks to the powerful controller and motors Fgedpfxev Nzrbo Ah Uji • Integrated control cabinet and laser source with maintenance-friendly access • Fast service response thanks to remote service • Fully enclosed machine with OD5+ laser safety glass windows • Small footprint • Thanks to the adjustable control panel, front door, and side sliding door Higher dynamics & productivity • Thanks to the optimized machine bed and the extruded aluminum gantry, equipped with the fast, real-time Han's 901 (Rexroth) controller and powerful Rexroth motors, the HF Mini S achieves very high speed and acceleration. Component Configuration and Selection Control System: Han's 901 (Rexroth, Germany) Servo Driver: Rexroth, Germany Cutting Head: Han's, China Linear Guide: PMI, Taiwan (China) Rack: Svarog, Czech Republic Gearbox: Shimpo, Japan Servo Valve: Lanny, Germany Machine Frame: Han's, China Gantry: Han's, China Z-Axis: Han's, China Shuttle Table: Han's, China

Condition: new, functionality: fully functional, machine/vehicle number: S-CL-100-FN-EC, input voltage: 230 V, overall weight: 17 kg, total width: 250 mm, total length: 250 mm, total height: 475 mm, volume flow: 134 m³/h, Equipment: type plate available, ISI S-CLEANER Mechanical air filtration unit (solder fume) for up to 1 workstation Type: 100 FN Version: conditionally mobile (glide runners/no wheels) Control: none Horizontal, conditionally mobile mechanical air purifier with EC- radial fan for the separation of solder fumes. TECHNICAL DESCRIPTION: Air volume: Fgsdpfjwpu Twjx Ah Uji - 134 m³/h (air flow rate) - 100 m³/h (effective air capacity) (depending on the filter assembly, without collecting elements) Suction nozzle: NW 50 mm (rear) Filter assembly: - Pre-filter - HEPA filter H13 - Activated carbon cassette (refillable) Color: RAL 7035 light gray Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air capacity: not adjustable Dimensions: Length 250 mm / Width 250 mm / Height 475 mm Weight: 16.5 kg

Year of construction: 2004, condition: excellent (used), conveyor belt Trayband 4100x380 mm Fodpfxsin Nn Ij Ah Ujgi price: 1.750 Euro year: 2004 contact: Mr. Rainer Eckerle

Condition: good (used), Year of construction: 2011, operating hours: 1,525 h, functionality: fully functional, machine/vehicle number: SP091110K/W09SSA220BLSF8002, fuel: diesel, cubic capacity: 6,600 cm³, stroke length: 127 mm, cutting length (max.): 1,000 mm, cutting width (max.): 700 mm, Equipment: crane, Second splitting cross included (value approx. €15,000) TECHNICAL DETAILS Splitting stroke: up to 1,000 mm Splitting pressure: approx. 80 t Splitting cross: 24-way Hydraulic saw drive: Hultdins Super Cut 100 Saw bar: Oregon Harvester Log diameter: up to 700 mm Log length measurement: available Double cut: available Drive and control system Control system: Siemens PLC Fgedpowi H Igefx Ah Uoi Diesel engine: available Displacement: 6,600 cm³ Conveyor and material handling Chain conveyor: approx. 5,000 mm Sorting star conveyor: hydraulically adjustable Chip blower: available Feed table (W x L): 4,000 x 6,000 mm Chain transport including separation: Available Crane Crane: EPSILON M 100 L Use: Fully hydraulic timber loading crane Control: Radio control Chassis Tandem chassis: 18 t / air braked Control valve: 6-way including joysticks MACHINE DETAILS Operating hours: 1,525 h

Condition: new, functionality: fully functional, machine/vehicle number: S-CL-250-FN-EC, input voltage: 230 V, overall weight: 35 kg, total width: 430 mm, total length: 340 mm, total height: 600 mm, volume flow: 250 m³/h, Equipment: type plate available, ISI S-CLEANER Mechanical air filter device (soldering smoke) for up to 2 workstations Type: 250 FN Version: Mobile Control: without Horizontal, mobile mechanical air cleaner with EC radial fan for separating soldering smoke. TECHNICAL DESCRIPTION: Air volume: - 240 m³/h (volume flow) Fgedpfx Ahsvrylfj Uoi - 170 m³/h (effective air output) (depending on the filter configuration without collection elements) Intake nozzle: 2 x NW 50 mm (rear) Filter configuration: - Pre-filter G4 - HEPA filter H13 - Activated carbon cassette (2.5 kg, refillable) Color: RAL 7035 light gray (optional: special color) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air output: not adjustable Dimensions: length 340 mm / width 430 mm / height 600 mm Weight: 35 kg