Used Nakamura Tome Wt 150 for sale (43)

Condition: like new (used), Year of construction: 2011, functionality: fully functional, spindle motor power: 15,000 W, spindle speed (min.): 5,000 rpm, travel distance X-axis: 157 mm, travel distance Y-axis: 35 mm, travel distance Z-axis: 464 mm, rotational speed (max.): 6,000 rpm, total height: 1,885 mm, total length: 3,675 mm, total width: 2,258 mm, overall weight: 9,000 kg, CNC controller: Fanuc 18i-TB Capacity X-axis travel mm: 157,5 Y-axis travel mm: 35 Z-axis travel mm: 464,8 B-axis travel mm: 600 C-axis: 360º (0,001º) Turning length mm: 399 Max. turning diameter mm: ø: 190 Distance between spindle centers mm: 750 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Number of upper turrets: 1 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Milling function: Both Turrets Number of lower turrets: 1 Ijdpfjxiwnnox Agzjik Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 15 / 11 Counter spindle Speed spindle rpm: 4.500 Drive power spindle kW: 11 / 7.5 Equipment Part catcher Workarea light Bar Loader ILS - RBK Machine running time: Nominal Kva: 67,2 Basic machine dimensions / weight Length mm: 3.675 Width mm: 2.258 Height mm: 1.885 Weight kg: 9.000

Condition: good (used), Year of construction: 2006, operating hours: 51,000 h, functionality: fully functional, machine/vehicle number: M102006, turning diameter: 51 mm, spindle bore: 52 mm, spindle speed (min.): 6,000 rpm, spindle motor power: 8 W, rotational speed (max.): 6,000 rpm, overall weight: 5,650 kg, bar diameter (max.): 51 mm, Equipment: documentation/manual, Equipment: - chip conveyor - interface for bar feeder - separator for soluble oil - 2 Hainbuch collet chucks type BZI 52 - 2 driven tool holders + 4 standard tool holders - optional: Fanuc M10A robot integrated into the machine for loading/unloading Iodpfx Agsxnh Tljzsik

Condition: ready for operation (used), Year of construction: 2014, operating hours: 27,000 h, functionality: fully functional, travel distance Y-axis: 31 mm, rotational speed (max.): 6,000 rpm, bar passage: 42 mm, power: 11 kW (14.96 HP), Lathe is equipped with main and counter spindle! TECHNICAL DETAILS Turret Number of turrets: 2 Stations per turret: 12 (driven) MACHINE DETAILS Control: Fanuc 31i-B Monitor: 19" touch monitor EQUIPMENT Material catcher tray available Finished part unloader available Iijdpfxjwx Iwze Agzok Helical interpolation available Smart handwheel available Coolant pump available Hinged belt conveyor available Documentation available Short bar loader Breuning, year of manufacture 2005, available

Year of construction: 2000, condition: ready for operation (used), Number of axes: XYZC (8-axis), turning diameter: 250mm, turning length: 300mm, spindle diameter: 71mm, speed: 4500rpm, tool holder: BMT-55, number of tool positions: 2 x 12 positions, dimensions X/Y/Z: approx. 4000mm/4600mm/2200mm, weight: approx. 6000kg. Including bar loader Profimat IRCO Breuning, year of construction: 2004, bar diameter/length: 52mm/3000mm, dimensions X/Y: 1200mm/4000mm. Iisdpetufb Djfx Agzjk

Condition: used, Year of construction: 2006, functionality: fully functional, turning length: 780 mm, turning diameter: 270 mm, spindle motor power: 15 W, travel distance X-axis: 195 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 780 mm, Nakamura-Tome WT-300 CNC Lathe Year of manufacture: 2006 CNC Control: FANUC Series 18i-TB Machine weight: 12,000 kg Machine dimensions: Isdpfxjwx Hicj Agzoik Length: 5,230 mm Width: 2,500 mm Height: 2,300 mm Machining capacities: Max swing diameter over upper/lower carriage: Ø 310 mm (upper and lower) Distance between spindles (min - max): 120 mm – 1,200 mm Max turning diameter, main spindle/sub-spindle: Ø 270 mm Max turning length: 780 mm Spindle/bar capacity, main spindle/sub-spindle: Ø 65 mm Axis travels: X1 / X2 Axis: 195 mm Y Axis: 120 mm (±60 mm) Z1 / Z2 Axis: 780 mm B Axis: 850 mm C Axis: 360° (continuous) Main spindle and sub-spindle: Spindle speed: 50 – 4,500 rpm Spindle nose: ASA A2-6 Chuck diameter: Ø 225 mm Minimum programmable C-axis increment: 0.001° Motor power (cont. / 30 min.): 11/15 kW (both spindles) Turret No. 1 & No. 2 (identical): Static/tooling stations: 24 stations (12 live tooling) Live tooling speed: 3,600 rpm Live tooling motor power: 3.7 / 5.5 kW Turning/boring tool size: 25×25 mm / Ø 32 mm Rapid traverse rates: X1 / X2 / Y Axis: 16,000 mm/min Z1 / Z2 Axis: 24,000 mm/min B Axis: 36,000 mm/min C Axis: 100 rpm B Axis: 27,000 mm/min Included accessories: LNS bar feeder model MOVE (length capacity 2,300 mm) Chip conveyor Coolant collection tank with wash-down pump High-pressure pump with external coolant tank Various fixed and driven tool holders Tool presetting arm with dual-head RENISHAW interface Part unloading arm Manuals, electrical diagrams, and EC Declaration

Condition: excellent (used), Sub-spindle, Y-axis, C-axis FANUC 18i-TB control Turning diameter max 250 mm Turning length -555 mm Chuck Diameter -165 mm Main-spindle speeds 50-4'500 rpm Sub-spindle speeds 5'000 rpm Turret head 1+2: 24 positions with 12 driven positions each Tool presetting device Barloader Piece catching device Misc. accessories Iiedpjx A Eupjfx Agzsk MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2018, Sub-spindle, Y-axis, C-axis FANUC 31i B-NT-SmartX control Turning diameter max 225 mm Turning length -656 mm Chuck Diameter -210 mm Main-spindle speeds 4'500 rpm Sub-spindle speeds 6'000 rpm Turret head 1+2: 24 positions with 12 driven positions each Robot for workpiece loading Tool presetting device Misc. accessories MARCELS MASCHINEN CH Isdpfxevwkirs Agzjik

Condition: excellent (used), Year of construction: 2018, Nakamura-Tome NTRX-300 High Rigidity Multitasking Machine with NT Smart X Control, Halter Parts Loader & Fanuc Robot Isdjx Iv Nqjpfx Agzsik NT Smart X (Fanuc31i-Guide i). Maximum Turning Ø640mm. Maximum Turning Length 1,100mm. Distance Between Spindles Min/Max 250-1,350mm. Main Spindle- Buck BBC 210 3 Jaw Power Chuck. Maximum Spindle Speed 3,500rpm (22/18.5kW Motor). Spindle Nose A2-8. Bar Capacity Ø80mm. Sub Spindle- Kitagawa B-210 3 Jaw Power Chuck. Maximum Spindle Speed 3,500rpm (22/18.5kW Motor). Spindle Nose A2-8. Bar Capacity Ø80mm. Axis Travel 'X'=700mm, 'Z'=1,125mm, 'Y'= ± 125mm, 'B2'=1,100mm. Driven Tool (Milling) Maximum Spindle Speed 12,000rpm (22/15kW Motor). Swivel Range 225° (-120°/+105°). Spindle Taper Capto C6. 80 Position ATC. Maximum Tool Ø90/Ø120mm (Non-Adjacent Tool). Maximum Tool Length 300mm. Maximum Tool Weight 12kg. S/No. RX300709 (2018). Halter Load Assistant U-20 Parts Loader with HALTER Smart Touchscreen Control- 72 Workpiece Positions. Workpiece Diameter (Min-Max) Ø10-230mm. Minimum Workpiece (L x W) 10 x 10mm. Maximum Workpiece (L x W) 230 x 230mm. Maximum Height of Workpiece 250mm. Maximum Load Capacity Robot Arm 20kg. With Sick S30A-4011CA Safety Laser Scanner. S/No. DCH0203 (2019). Fanuc Robot M-20iA Type A05B-1225-B252- 6 Axis, Payload 20kg, Reach Approx 1,811mm. S/No. R18704467 (2018). With Renishaw Tool Setting Arm, Renishaw Tool Breakage Detection, Renishaw Spindle Inspection Probe, Coolant System With 8 Bar Through Spindle Coolant, Parts Loading/Unloading Conveyor With Schunk Spindle Parts Gripper, Tri-Mist 1000 Mist Extraction Unit, Daikin Inverter Oil Chiller, LNS Turbo MH500 Chip Conveyor, Parts Catcher, Foot Switches, Signal Tower, Handwheel & Built in Control Manuals. Overall Dimensions L4,460 x D2,670 x H2,615mm. Weight 18,000kg. Note: Tooling Not Included.

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 Iisdpfx Agex Hhm Eezok max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: excellent (used), Year of construction: 2015, Maximum cutting diameter 640mm, maximum cutting length 1100mm, bar capacity 80mm, Ijdpfxett Nrto Agzsik B axis -120/+105 degrees, C axis 0.001 degrees, Spindle power 18.5Kw, spindle speed 3,500 rpm, milling power 15Kw, milling speed 12,000 rpm, sub spindle speed 3,500 rpm, 40 station ATC, Y axis travel -/+ 125mm, Fanuc 31i control, magazine barfeed, swarf conveyor, parts catcher.

Condition: used, Year of construction: 2003, NAKAMURA TOME SUPER NTJ CNC LATHE MAKE NAKAMURA TOME, MADE IN JAPAN MODEL SUPER NTJ YEAR 2003 CONTROL FANUC 18 iT B CHUCK SIZE 210.0 mm MAX TURNING DIA. 200.0 mm BETWEEN CENTRES 780.0 mm DRAW TUBE DIA. 80.0 mm TRAVELS: X AXIS: 750.0 mm Z AXIS: 130.0 mm Iodpfx Agov I Tx Rszeik TURRET 2 x 12 STATIONS SPINDLE SPEED Up to 5,000 rpm SPINDLE BORE 65.00 mm SPINDLE NOSE A2-6 PLUS CNC SHORT MAGAZINE BARFEED TURRET TOOLING SWARF CONVEYOR MANUALS

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 31201, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Selling a fully functional Nakamura Superturn 3 at short notice due to lack of space. Feel free to contact us with any questions. Iisdpfx Agexyk Rwszsk

Condition: used, Year of construction: 1992, serial number 31302 control Fanuc with double spindles x turning diameter max. 600 mm x-travel 1000 mm with magazine x extensive accessories ca. 100 Aufnahmen, auch angetrieben weight of the machine ca. 13 t Iiedpfxjhn T D Ie Agzok +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Year of construction: 2019, Nakamura-Tome NTRX-300 High Rigidity Multitasking Machine with Halter Parts Loader, Fanuc Robot & Hydrafeed Barfeeder Iisdpfx Agex Iv H Nszsk With NT Smart X (Fanuc 31i-Guide i) Control. Maximum Turning Ø640mm. Maximum Turning Length 1,100mm. Distance Between Spindles Min/Max 250-1,350mm. Main Spindle- Buck BBC 210 3 Jaw Power Chuck. Maximum Spindle Speed 3,500rpm (22/18.5kW Motor). Spindle Nose A2-8. Bar Capacity Ø80mm. Sub Spindle- Kitagawa B-210 3 Jaw Power Chuck. Maximum Spindle Speed 3,500rpm (22/18.5kW Motor). Spindle Nose A2-8. Bar Capacity Ø80mm. Axis Travel 'X'=700mm, 'Z'=1,125mm, 'Y'= ± 125mm, 'B2'=1,100mm. Driven Tool (Milling) Maximum Spindle Speed 12,000rpm (22/15kW Motor). Swivel Range 225° (-120°/+105°). Spindle Taper Capto C6. 40 Position ATC. Maximum Tool Ø90/Ø120mm (Non-Adjacent Tool). Maximum Tool Length 300mm. Maximum Tool Weight 12kg. S/No. RX300808 (2018). Halter Load Assistant S-230-20 Parts Loader with HALTER Smart Touchscreen Control- 12 Position Stacker. Workpiece Diameter (Min-Max) Ø43-230mm. Maximum Height of Workpiece 175mm. Maximum Load Capacity of Robot Arm 20kg. Maximum Total Weight on Rotating Table 1,250kg. Maximum Stacking Height 350mm. Number of Stacking Stations (1 Empty) 12. Maximum Weight Per Station 115kg. With Sick S30A-4011CA Safety Laser Scanner. S/No. DCH0300 (2019). Fanuc Robot M-20iA Type A05B-1225-B252- 6 Axis, Payload 20kg, Reach Approx 1,811mm. S/No. R18Y00642. Hydrafeed Multifeed Barfeeder Length 2,100mm. S/No. 6849. With Renishaw Tool Setting Arm, Renishaw Spindle Inspection Probe, Coolant System With 8 Bar Through Spindle Coolant, Parts Loading/Unloading Conveyor With Schunk Spindle Parts Gripper, Daikin Inverter Oil Chiller, LNS Turbo MH500 Chip Conveyor, Parts Catcher, Foot Switches, Signal Tower, Handwheel & Built in Control Manuals. Overall Dimensions L4,460 x D2,670 x H2,615mm. Weight 17,000kg. Note: Tooling Not Included.

Condition: used, Year of construction: 2007, machine/vehicle number: L151804, Nakamura-Tome NTM3 lathe together with a 6-meter IRCO SiMag Breuning bar feeder. The machine has been serviced throughout its life by Abplanalp service, who also disconnected it and prepared it for transport after production was finished. We took it in as a trade-in with plans to start some production, but it turned out to be too large for our needs – so we never even connected it since then. Technical details (from manufacturer): • Year of manufacture: 2007 • 11-axis Nakamura-Tome Super NTM3 • 2 spindles, 3 turrets • Every second tool driven • Control system: Fanuc 16i-TB • Main spindle: 15 kW, up to 4500 rpm • Sub spindle: 11 kW, up to 5000 rpm • Max turning diameter: 190 mm • Bar capacity: 65 mm • Machine weight: 12,000 kg Full documentation included: all manuals and schematics originally supplied with the machine. Additional equipment: Iiodpfx Aoxg Nb Iegzsk • Parts catcher • Parts conveyor • Bar loader: IRCO SiMag • Electrical transformer • IRCO SiMag Breuning bar feeder (6m)

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: W301002, Technical characteristics: Work Area # Maximum turning diameter: 270 mm # Maximum machining diameter: 215 mm # Maximum workpiece length: 265 mm # Distance between spindle noses: 1080 mm # X1/X2-axis travel: 195 mm / Rapid traverse in X: 12 m/min # Z1/Z2-axis travel: 265/780 mm / Rapid traverse in Z: 24 m/min # B-axis travel (right spindle): 850 mm / Rapid traverse in Z: 24 m/min Isdjxw Uh Iepfx Agzoik Spindles # Spindle as per DIN 55026: Size A2-6 # Maximum speed: Left & Right 50–5000 rpm # Power at 100% duty cycle: Left 11 kW / Right 11 kW # Main spindle special feature: Optional dual command clamping cycle for 2-stage chuck clamping # Bar capacity: Left spindle 51 mm / Right spindle 51 mm Two Tool Turrets # Tool interface: BMT55 # Number of stations: 12-position disc turret Electrical Equipment # Operating voltage: 200/220VAC +10%/–15%, single-phase, 50/60 Hz # Connected load: 54 kVA (connection 61 VA) Dimensions # Machine dimensions (L×W×H): 3645 × 1875 × 1970 mm # Weight: 10,800 kg Main Features and Capabilities: # Horizontal construction: Optimal chip evacuation and easy part handling # CNC control: Fanuc 6i-TT # Chip conveyor # Automation interface for gantry loader available # Main spindle fitted with Autoblock Chuck 265 TXS # Each turret equipped with 2 external tool holders # Documentation: Electronic not available / Hardcopy available Machine status: RUNNING/IN OPERATION

Condition: used, Year of construction: 2003, turning diameter 190 mm turning length 620 mm control Fanuc Series 18i-TB Iijdpexiy Aujfx Agzsk total power requirement 15 kW weight of the machine ca. 13,5 t dimensions of the machine ca. 5350X3350x2395 m

Year of construction: 2006, condition: good (used), bar capacity 42 mm - three x 12 position turrets (3 x Y axis +/- 31 mm) - LNS Sprint S3 new in 2007 with rear magazine - weel tooled - Fanuc 31iTA Control Iisdjn Hvdkspfx Agzjk

Condition: ready for operation (used), Year of construction: 2007, operating hours: 18,179 h, functionality: fully functional, machine/vehicle number: B151707, turning length: 620 mm, turning diameter: 190 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 345 mm, distance between spindles: 970 mm, TECHNICAL DETAILS Maximum turning diameter: 190 mm Maximum turning length: 620 mm Maximum swing diameter over bed: 190 mm Swing diameter over cross slide: 190 mm Standard turning diameter: 170 mm Maximum distance between spindles: 970 mm Axis Travel X-axis 1: 345 mm X-axis 2: 167.5 mm Y-axis: +/- 45 mm Z-axis 1: 1,240 mm Z-axis 2: 685 mm B-axis: +/- 91° C-axis 1+2: 360° Main Spindle Maximum spindle speed: 4,500 rpm Power capacity - main spindle: 18.5 / 15 kW Spindle bearing diameter: 110 mm Spindle bore: 80 mm Maximum bar capacity: 65 mm Spindle nose: A2-6 Maximum chuck diameter: 165 mm C-axis: 0.001° Sub Spindle Maximum spindle speed: 5,000 rpm Power capacity - sub spindle: 11 / 7.5 kW Spindle bearing diameter: 90 mm Spindle bore: 63 mm Maximum bar capacity: 51 mm Spindle nose: A2-5 Maximum chuck diameter: 165 mm C-axis: 0.001° Sub spindle traverse: 760 mm Upper Turret Number of tool stations: 24 Number of driven tool stations: 12 Shank diameter: 25 mm Bore shank diameter: 32 mm Indexing time: 0.2 - 0.7 s Chip-to-chip time: 3.0 s Maximum tool diameter: 80 mm B-axis: 182° Y-axis: 90 mm Lower Turret Number of tool stations: 24 Number of driven tool stations: 12 Shank diameter: 25 mm Bore shank diameter: 32 mm Indexing time: 0.2 - 0.7 s Chip-to-chip time: 3.0 s Maximum tool diameter: 80 mm Turret Tool Drive Spindle speed driven tool stations: 6,000 rpm Power capacity - driven tool stations: 5.5 / 3.7 kW Number of driven tool stations: 24 Maximum shank diameter (bolt): 25 mm / 32 mm Feeds Rapid traverse (X / Y / Z): 16 / 6 / 40 m/min Rapid traverse B-axis: 180°/s Rapid traverse C-axis: 600 rpm Feed rate X: max. 16,000 mm/min Feed rate Y: max. 6,000 mm/min Feed rate Z: max. 40,000 mm/min Isdsxgpcljpfx Agzjik Creep feed: 0 - 1,260 mm/min Feed rate C: 1 - 4,800°/min MACHINE DETAILS CNC control: Fanuc 18 iTB Weight: 12,500 kg Electrical Data Frequency: 50 Hz Voltage: AC 200/220 V Maximum load: 198/180 A Main switch: 225 A Transformer voltage: 68.6 kVA Control voltage: DC 24 V Total power consumption: 77 kVA Operating Hours Spindle hours: 18,179 h Machine hours: 53,242 h Power-on hours: 99,999 h

Condition: good (used), Nakamura-Tome TW-20 CNC Twin Turret Lathe With Fanuc CNC Control & Iemca TAL/AUTO 65/38 Automatic Bar Feeder Iiedpfx Agox Ah Rgozok Kitagawa HOH-60K Ø160mm 3-Jaw Power Chuck. (1) Ø140mm Collet Holder, Max 4,500 rpm. Maximum Turning Approx Ø290mm. Maximum Turning Length Approx 190mm. Bar Capacity Ø51mm. Driven Tool Speed Approx 5,000rpm. (2) 12-Station Turrets. S/No. W21206. Iemca TAL/Auto 65/38 Automatic Ø65mm x 3 Metre Capacity Bar Feeder with Control. With: Transformer, Frederick Crowther 'Cromar 6028' Swarf Conveyor, Swarf Bin, (2) Foot Switches, Coolant System, Tool Presetting Arm & Parts Catcher. This lot also includes Mobile Parts Table with Round, Hexagon, Plain & Serrated Collets Plus Bar Feeder Spares. Power Supply: 415 Volt 3-Phase.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,212 h, functionality: fully functional, machine/vehicle number: B151104, turning length: 620 mm, turning diameter: 190 mm, travel distance X-axis: 345 mm, travel distance Y-axis: 45 mm, travel distance Z-axis: 1,240 mm, TECHNICAL DETAILS Max. turning diameter: 190 mm Max. turning length: 620 mm Chuck size: 165 mm Swing over cross slide: 190 mm Axes Travel X1/X2 axes: 345 mm / 167.5 mm Travel Z1/Z2 axes: 1,240 mm / 685 mm Y-axis travel: ±45 mm B-axis travel: ±91° Rapid traverse X1/X2 axes: 16 m/min Rapid traverse Z1/Z2 axes: 40 m/min Servo-controlled: 0.001° Hirth coupling: 1° Spindles Spindle speed: 5,000 rpm for 51 mm (L/R) Spindle speed: 4,500 rpm for 65 mm (left only) Bar capacity, left spindle: 65 mm Bar capacity, right spindle: 51 mm Ijdpfx Agsw Hyi Sozsik Drive power left: 18.5 kW Drive power right: 15.711 kW Turrets Turret for driven tools: 12 positions Turret for turning tools: 24 positions Tool size (square/round): 25 mm / 32 mm Control: Fanuc 18 iTB MACHINE DETAILS Net weight: 12,500 kg Automatic operation hours: 16,212 h Feed hours: 8,392 h Control "on" hours: 27,816 h EQUIPMENT Spiral interpolation Left side air blast IRCO interface Collision monitoring NT Nurse NC kit Spindle speed correction switch for both spindles Work area lighting Automatic central lubrication for all axes Mobile coolant tank Door interlock Transformer CE marking Chip conveyor Coolant and air blast through right spindle 5 free M-function pairs Finished parts gripper G Parts catcher tray A for material remnants Polygon turning function Electronic handwheel Spann top chuck GR 65 modular A6 3-jaw chuck, right side

Condition: used, Year of construction: 2011, functionality: limited functionality, bar passage: 51 mm, overall weight: 6,000 kg, bar capacity 51 mm – three turrets – three Y axes – fixed/driven tool holders – LNS Sprint 552 bar feeder new in 2011 – Fanuc Control Iiodjwvvyropfx Agzek

Condition: ready for operation (used), Year of construction: 2020, General Data Measurements height 1858 mm Dimensions Machine Length 3675 mm Main Drive Spindle Speed 6000 RPM Number of axis 7 Spindle motor power 5.5 kW Iedpfxox Ixigo Agzsik Technical Specification Driven Tools yes This 7-axis NAKAMURA Tome WT150 II was manufactured in 2020, featuring dual 12-tool turrets and motorized positions for enhanced flexibility. It includes a high-pressure coolant pump and a bar feeder interface with an LNS Quick Load Servo 80 S2. Ideal for complex turn-mill operations, consider the opportunity to buy this NAKAMURA Tome WT150 II turn-mill centre. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning length: 300 mm, TECHNICAL DETAILS Turning length: 300 mm Iiedpfexz Apbex Agzek Distance between centers: 800 mm MACHINE DETAILS Control: FANUC 16T EQUIPMENT 3 turrets Sub-spindle

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning diameter over cross slide: 270 mm, turning length: 780 mm, turning diameter: 215 mm, spindle bore: 71 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 195 mm, travel distance Y-axis: 60 mm, travel distance Z-axis: 780 mm, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 27 m/min, Equipment: documentation/manual, CNC lathe Nakamura Tome WT 300 with: - maximum turning diameter 270 mm - maximum turning length 780 mm - Fanuc 18i-TB control unit - main spindle and sub-spindle - spindle nose ASA 8 - C axis - Y axis - 2 turrets with driven tools - automatic door - LNS bar feeder - chip conveyor - various included tapers Ijdpfx Aox H Nmmogzjik - various included bars Free 12/24 month payment deferral available