CNC Lathe

NAKAMURA TOME TW 30

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: W301002, Technical characteristics: Work Area # Maximum turning diameter: 270 mm # Maximum machining diameter: 215 mm # Maximum workpiece length: 265 mm # Distance between spindle noses: 1080 mm # X1/X2-axis travel: 195 mm / Rapid traverse in X: 12 m/min # Z1/Z2-axis travel: 265/780 mm / Rapid traverse in Z: 24 m/min # B-axis travel (right spindle): 850 mm / Rapid traverse in Z: 24 m/min Spindles # Spindle as per DIN 55026: Size A2-6 # Maximum speed: Left & Right 50–5000 rpm # Power at 100% duty cycle: Left 11 kW / Right 11 kW # Main spindle special feature: Optional dual command clamping cycle for 2-stage chuck clamping # Bar capacity: Left spindle 51 mm / Right spindle 51 mm Two Tool Turrets # Tool interface: BMT55 # Number of stations: 12-position disc turret Electrical Equipment # Operating voltage: 200/220VAC +10%/–15%, single-phase, 50/60 Hz # Connected load: 54 kVA (connection 61 VA) Dimensions # Machine dimensions (L×W×H): 3645 × 1875 × 1970 mm # Weight: 10,800 kg Main Features and Capabilities: # Horizontal construction: Optimal chip evacuation and easy part handling # CNC control: Fanuc 6i-TT Giodpfx Asxw Uh Isbren # Chip conveyor # Automation interface for gantry loader available # Main spindle fitted with Autoblock Chuck 265 TXS # Each turret equipped with 2 external tool holders # Documentation: Electronic not available / Hardcopy available Machine status: RUNNING/IN OPERATION

Condition: used, Year of construction: 2008, Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Gjdpfx Aoia Rtdjbrein Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at) or *

Year of construction: 1990, condition: good (used), CNC-4th axis NIKKEN type: CNC-200 year 1990 Gedpfx Aogabu Usbrsin with counterholder and base plate.

Condition: new, Year of construction: 2023, Highly efficient series production Clamp – enter the cutting dimension – start. Automatic saws with loading are a standard of rational series processing of bar and bundle material. Cutting area max. up to 290 x 320 mm. Furnishing Automatic hydraulic sawing machine with NC control for cutting from 0° to 60° right, complying with all CE safety standards The device has 9 programs, each of which composed of 99 individual steps, with a total number of approx. 890 cutting positions, with corresponding piece counter Function: material feed closing fixed vice Blade rotation, distribution of emulsifiable liquid, temple lowering until the end of the cut and return of the feed carriage until specified amount bail return and stop the blade rotation by cooling liquid distribution cycle repetition Hydraulic feed cut by cut with no length limit Numerical control of quantity and length of cut Hydraulic control center with cutting pressure adjustment The saw blade is tensioned electro-mechanically by means of Microswitch monitored. Device with brush for belt cleaning Bimetallic strip 3200 x 27 x 0.9 mm Giodpfx Abjfww Sqjrsn Section thickness 1.2 mm Material feed stroke 600 mm Motor hydraulic center 0.75 kW Electric pump 0.09 kW to cool the belt It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: used, Year of construction: 1982, grinding length:500 mm grinding width:225 mm workpiece height:400 mm total power requirement:5,5 kW weight of the machine ca.:3,4 t Godpfx Ascxxtmjbroin NC81 NC-control, table belt drive 100-25000 mm/min., automatic feed, electronic dressing unit 020 NC-K with RPM-compensation, coolant pump, emergency cut-off

Condition: used, Year of construction: 2001, DAEWOO - DOOSAN PUMA 400 LB CNC LATHE MAKE DAEWOO - DOOSAN, MADE IN KOREA Godpfx Absxp Nfxsroin MODEL PUMA 400 LB YEAR 2001 CONTROL FANUC 18 iT CHUCK SIZE 450.0 mm SWING OVER THE BED 700.0 mm SWING OVER SADDLE 480.0 mm MAX TURNING DIA. 380.0 mm BETWEEN CENTRES 2100.0 mm DRAW TUBE DIA. 117.5 mm TRAVELS: X AXIS: 362.0 mm Z AXIS: 2155.0 mm TURRET 10 STATIONS SPINDLE SPEED 20 - 2,000 rpm SPINDLE BORE 132.00 mm SPINDLE NOSE A2 - 11 BEARING DIA. 180.0 mm TURRET TOOL HEIGHT 25.0 mm TURRET BAR DIA. 50.0 mm TURRET INDEXING TIME 0.25 sec FEEDRATE RAPID TRAVERSE X: 16,000 mm/min Z: 18,000 mm/min FEEDRATE CUTTING FEED X , Z: 0,001 ~ 500.000 TAILSTOCK QUILL DIA. 120.0 mm TAILSTOCK QUILL BORE TAPER MT#6 TAILSTOCK QUILL TRAVEL 120.0 mm PLUS HYDRAULIC STEADY TOOL SETTING ARM SWARF CONVEYOR TURRET TOOLING FULL SET OF MANUALS

Condition: like new (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,250 mm, table load: 5,000 kg, spindle diameter: 105 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 2,500 rpm, table length: 1,400 mm, table width: 1,400 mm, feed length W-axis: 630 mm, rotational speed (min.): 10 rpm, rotational speed (max.): 2,500 rpm, quill diameter: 105 mm, year of last overhaul: 2025, The machine is in excellent technical condition after a complete mechanical overhaul. Equipped with a Heidenhain iTNC 530 control system. Gsdpfxex E Uhao Abrein

Condition: used, Year of construction: 2001, Deckel Maho DMC 60U Hi-dyn Machining Center Condition: Used Year of manufacture: 2001 Operating hours: 56,376 Spindle hours: 26,451 Technical specifications: Travel X/Y/Z: 600 / 700 / 600 mm Motor power: 15 kW (40% duty cycle); 10 kW (100% duty cycle) Spindle speed: 18,000 rpm Tool holder: SK 40 Magazine positions SK 40: 60 Equipment: - 3D path control MillPlus IT - Horizontal double-arm tool changer Gsdsu Rnluspfx Abrjin - Automatic swivel milling head - Rotating safety glass - NC rotary table with pallet carrier - Rotary pallet changer - 2 pallets 630 x 500 mm - Universal milling head with controlled B axis SK 40 (only in combination with SK 40 motor spindle) - Tool holder for HSK-A63 according to DIN 69893 - Electronic handwheel - Operating mode 4 extended manual intervention - Rinse gun with pump - Tool breakage control SK 40 mechanical version, range: 63...310 mm / +/- 3 mm - Intermittent chip conveyor operation - Internal coolant supply switchable from 40 bar to 80 bar

Year of construction: 1969, condition: ready for operation (used), Max. grinding depth: 80mm, distance spindle table: 145mm, spindle bore: 28mm, connected load: 7kW, length: 2100mm, width: 1400mm, height: 950mm, weight: 1.6t, with documentation, an inspection is possible. Giodpfx Abeqzkdmjren

Condition: used, Article: clamping head Manufacturer: Different For multi spindle automatic lathes, used and new Please, contact us for getting more information and pictures on mail(at) or Gedpfx Aen H Nzujbrein *