Used Oil Chip Centrifuge for sale (15,926)

Condition: good (used), Filling quantity: 35 kg Hodpfx Agogl Auxszsg

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, Complete system, Hsdpsw Evy Refx Agzjg centrifuge E 700 H/1, drum 690/720/600 mm, drum volume 120 L, speed 735 rpm, wall thickness 12 mm, material GS 45, max. loading 300 kg, batch/hour 10, heating 8 kW, operating voltage 380 V, total connected load 35 A, lifting device for filling, vibratory discharge for chips and parts, three separation drums with different perforation patterns. Chip conveyor belt to the scrap container. System can still be demonstrated under power.

Condition: used, Year of construction: 2020, total height: 2,600 mm, total width: 1,250 mm, total length: 1,610 mm, rotational speed (min.): 1,200 rpm, power: 4 kW (5.44 HP), SPYRA Chip Centrifuge 500H - For de-oiling wet chips containing oil or coolant emulsion - Fully operational and ready for use - Warranty available upon request! Hsdew Nq Amspfx Agzeg - Contaminants and tramp parts within the chips are not an issue for this machine, as it has been specifically designed and patented for this purpose. Throughput capacity for broken chips: - Steel: 2 t/hr - Aluminum: 0.5 t/hr - Brass: 2.2 t/hr - Grey cast iron: 2.2 t/hr The machine can be inspected in 71384 Weinstadt near Stuttgart.

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 2,900 mm, total width: 1,350 mm, total length: 1,710 mm, rotational speed (min.): 1,000 rpm, power: 5.5 kW (7.48 HP), SPYRA chip centrifuge 600H - For removing oil or emulsion from wet chips - Fully operational and ready for use - Warranty available on request! - Tramp material within the chips presents no issue for this machine; it is specially designed and patented for this purpose. Throughput capacity for broken chips: - Steel: 4 t/h - Aluminum: 0.8 t/h - Brass: 2.7 t/h - Grey cast iron: 2.7 t/h The machine can be inspected in 71384 Weinstadt near Stuttgart. Hjdpfx Agsw Nqu Aozsg

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – wood-chip biomass boiler (2009) ⚙️ Technical data • 🔹 Model: Fröling Turbomat 500 • 📅 Year: 2009 • 🔥 Nominal output: 450 kW (W40) • ♨️ Maximum output: 495 kW • 💧 Water content: 750 litres • 🧱 Operating pressure: 6 bar • 🌡️ Max. temperature: 110 °C • ⚖️ Weight: approx. 6 800 kg • 🏭 Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria ⸻ 🔩 Main features • ♻️ Fully automatic ash removal and heat-exchanger cleaning • 🔥 Four-layer, fireclay-lined high-temperature combustion chamber Hjdpfjxmrwfjx Agzog • 💦 Water-cooled feed channel – ideal for moist fuels • ⚙️ Moving grate for continuous and efficient combustion • 🌬️ Lambda control with multi-zone air regulation and low emissions • 🌀 Automatic draught and suction fan control • 🧰 Robust industrial design, easy to maintain • 🌲 Fuels: wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Advantages • ⚡ High efficiency, fully automatic operation • 🔧 Low maintenance, long service life • 🌫️ Reliable performance even with higher-moisture fuel • 🏢 Ideal for industrial and municipal heating systems ⸻ 📍 Location: Mosonmagyaróvár, Hungary

Condition: used, ALREADY PACKED ‼️ IMMEDIATE DELIVERY ‼️ 🔥 Several pieces of Fröling Turbomatic (TMC) wood chip boilers for sale – 35 / 48 / 55 / 110 kW outputs! 🔥 Quality, automated Fröling TMC series biomass boilers for sale, with different outputs. An ideal choice for families from single-family homes to small industrial facilities, where reliable, economical heating is important. Hsdpfxswakkts Agzeg ⸻ Available types: • Fröling TMC 35 kW – for smaller systems • Fröling TMC 48 kW – for medium heat demand • Fröling TMC 55 kW – larger workshop, farm • Fröling TMC 110 kW – for industrial/agricultural systems ⸻ Features: 🌲 Fuel: wood chips, pellets, shavings 🔁 Automatic operation: dosing, cleaning, ash removal 🧠 Advanced combustion control, intelligent control ♻️ High efficiency, low emissions 🇦🇹 Fröling – Austrian premium biomass technology 💥💰 Prices vary by type – inquire by phone or email! 💰💥 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ 💼 Top Heating Systems – ProfiKazán Wide selection of used Froling boilers, with expert support.

Condition: used, This listing is for the Labnet Spectrafuge 24D centrifuge The unit is in full working condition and is ready for immediate use The Spectrafuge 24D is a compact benchtop centrifuge designed for the efficient separation of a wide range of research samples. Its small footprint makes it ideal for laboratories with limited bench space, while offering the performance and flexibility needed for micro-volume processing. Key Specifications Maximum Speed: Up to 13,300 rpm Maximum RCF (Relative Centrifugal Force): 16,300 × g Capacity: 24 x 1.5/2.0 mL microcentrifuge tubes Motor: Brushless—requires no routine maintenance Timer: Adjustable from 1 to 30 minutes; supports continuous or pulse operation Rotor Type: Easy-access 24-place aluminum rotor, included Adapters Available: For tubes smaller than 1.5 mL (0.5 mL, 0.4 mL, 0.2 mL) Cooling System: Multi-flow air cooling; maintains ambient temperature and is safe for use in cold rooms Control Interface: Digital microprocessor with LED displays; parameters set using two intuitive smart knobs Memory Function: Remembers last run settings Quiet Operation: Engineered for minimal noise Dimensions: 23.5 x 29.2 x 21.6 cm Hedpfx Aoxv Dhnegzsg Weight: 8.1 kg Power Supply Options: 120V, 50/60 Hz, 200W, 2.6A (North America) 100V, 50/60 Hz, 190W, 2.7A (Japan) 230V, 50/60 Hz, 170W, 1.2A (Europe/UK)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, load capacity: 120 kg, empty load weight: 1,450 kg, Vehicle description OIL & STEEL Picchio 1265 (HINOWA) Year of manufacture: 2001 1,450 kg 12 metre working height Hodpex Nalljfx Agzjg 6.5 metre lateral outreach 120 kg lifting capacity - Bi-energy (diesel + electric drive) - Telescopic + articulated boom - Good tracks - Immediately ready for use - New Austrian inspection log available before delivery upon request! Sale price: 15,900,-- net Affordable delivery possible!

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, operating hours: 2,900 h, mileage: 35,000 km, load capacity: 250 kg, lifting height: 20,000 mm, TRUCK MOUNTED PLATFORMS Oil&Steel 20.10 Plus Year 2020 Hjdpox Hf U Tsfx Agzeg Working height 20 meters Horizontal outreach 10,2 meters Basket capacity 250 kg Working hours 2900 Km 35.000 All hydraulic controls Good conditions All regular documents

Condition: new, functionality: fully functional, protection type (IP code): IP55, 🔹 General Information Product Type: High Flow Oil Cooler Application: Designed for cooling oil in large machinery Cooling Units: 3 identical condenser units (each can operate separately) Quantity: 2 pieces available Price: Per piece 🔹 Technical Specifications Motor: Voltage: 380-420V / 660-720V Speed: 1460 rpm Power: 11 kW Quantity: 2 pieces Cooling System: Number of Condenser Units: 3 (independent operation) Cooling Type: Oil cooling 🔹 Key Features ✅ High Cooling Capacity – Built for large industrial machines ✅ Independent Operation – Each condenser unit can function separately ✅ Versatile Applications – Can be adapted for different uses ✅ Durable & Heavy-Duty Design – Engineered for continuous operation ✅ Multiple Voltage Compatibility – Works with both 380-420V and 660-720V power sources 🔹 Typical Applications Heavy-Duty Industrial Machines – Used in hydraulic systems, power plants, and factories Construction Equipment – Excavators, loaders, and heavy-duty machinery Hsdpfx Ajv Edh Rogzeg Manufacturing Facilities – Cooling oil in presses, CNC machines, and automated systems Marine & Offshore Equipment – Cooling solutions for ship engines and offshore platforms

Condition: new, functionality: fully functional, Year of construction: 2023, overall weight: 500 kg, total height: 580 mm, total length: 600 mm, total width: 500 mm, load capacity: 35,000 kg, winch Producing company Dinamic oil Type SW35/2 JMG Year built 2023 Height (mm) 580 Length (mm) 600 Lifting weight (kg) 35,000 Weight (kg) 500 Hsdpjxp Scmofx Agzsg Width (mm) 500

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 950 h, load capacity: 300 kg, mast type: free lift with telescopic boom, overall weight: 7,490 kg, fuel type: diesel, color: white, Equipment: ABS, The truck-mounted work platform 20m 3.5 t can be operated with a standard category B driving licence and is ideal for all tasks at heights. Delivery of the work platform is possible but will be invoiced separately. Hsdpfsxvmn Rex Agzeg

Condition: used, This listing is for a Thermo Fisher Scientific Sorvall RC6+ Centrifuge The unit is in full working condition and is ready for immediate release. The Sorvall RC 6 Plus is a high-speed, refrigerated floor-standing centrifuge designed for large-volume separations in research, bioprocessing or production labs. According to the manufacturer, it: Is capable of speeds up to 22,000 rpm (which corresponds to about 55,200 ×g) without needing a vacuum system. Handles up to 4 × 1,000 mL bottles in a single run (i.e., ~4 L total) in its standard configuration. Uses a brushless high-frequency motor drive, and has full refrigeration for temperature control. Offers a broad rotor compatibility platform (including composite, aluminium, continuous flow etc) for different Hedpsxukkyofx Agzeg In short: this is a heavy-duty centrifuge for larger volumes and higher speeds, suited to labs that need more capacity and performance than benchtop or mid-range units. Key Features & Highlights Here are some of the standout features: Speed & G-force: Up to 22,000 rpm, approx. 55,200 ×g. Capacity: 4 bottles of 1,000 mL (4 L total) in typical configuration. Temperature control: Ability to set in range from -20 °C to +40 °C (in 1 °C increments), and maintain temperature accuracy of ±2 °C. Motor/drive: Brushless high-frequency motor = faster spin up/downs, lower maintenance than older belt drives. Programmability & control: Up to 30 stored programs, with features like real-time control (delayed start/stop), ω² dt (integrator) for reproducibility, pre-cool function, and both rpm and RCF display. Safety & interlocks: Automatic lid-lock when running, door cannot be opened while rotor is spinning, and run terminates automatically in the event of certain malfunctions. Rotor flexibility: Supports a wide selection of rotors (fixed-angle, swinging bottle/bucket, continuous flow), including composite carbon-fibre rotors for higher performance / durability

Condition: not inspected (used), Year of construction: 2010, empty load weight: 2,700 kg, Vehicle Description Tracked Aerial Platform OIL & STEEL Octopussy 1800 EVO Year of manufacture: 2010 Hour meter not functional! Working height: 17.8 meters Lateral reach: 8.5 meters Own weight only 2,700 kg - Bi-energy (diesel + electric) - Telescopic boom Hodsx Hzz Aepfx Agzog - Articulated boom - Adjustable undercarriage - Non-marking tracks - New Austrian inspection book available upon request before delivery! Sales price: €22,900 net Low-cost delivery possible!

Condition: used, Year of construction: 2005, Oil en steehl octopussy 14.65 Year of construction 2005 Hedpfx Agjxrg H Eezjg Working height 14.65 m Missionary range 6.50 mtr Weight 1600 kg Petrol/electric

Condition: used, Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor -Manufacturer: dinamic oil, gearbox type EH211 SN 6.2 Hedpfsi Eg Nnex Agzeg -Dimensions: see photos -Total dimensions: Ø 230 x 190 mm -Weight: 30 kg

Condition: ready for operation (used), functionality: fully functional, Oil Quick Pin ØBoom Pin Spacing Price: OQ65 70/70 282 430 3,000.00 € OQ70 60/60 280 330 3,000.00 € OQ80 90/90 345 510 3,500.00 € OQ80 90/90 353 515 3,500.00 € QO80 90/90 355 510 3,500.00 € OQ80 100/90 387 530 3,500.00 € OQ80 100/100 420 610 3,500.00 € OQ80 90/90 350 510 3,500.00 € OQ80 90/90 350 500 3,500.00 € OQ80 90/90 350 510 3,500.00 € OQ80 80/80 310 475 3,500.00 € OQ90 110/100 440 595 18,000.00 € OQ90 without bracket 15,000.00 € OQ90 110/110 470 590 18,000.00 € Verachtert Pin Ø Boom Pin Spacing CW40 80/80 310 445 2,000.00 € Lehnhoff Pin Ø Boom Pin Spacing HS21 80/80 465 333 2,000.00 € HS21 80/80 305 475 2,000.00 € Additional mounting plates available Liebherr Pin Ø Boom Pin Spacing Hodpoxhdh Sefx Agzog SWA 48 65/65 253 370 2,000.00 € SWA 48 80/70 350 420 2,000.00 € SWA 48 80/80 327 460 2,000.00 €

Condition: new, Year of construction: 2025, functionality: fully functional, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. Hodpfx Agjrivv Eozjg At this point you could think of: Shampoos Creams Honey Jam Milk Yogurt Water Alcohol Pesto Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Condition: used, This listing is for the Sigma 2-15 Centrifuge Hedpfx Agsxhffrezog +Accessories Shown The unit is in full working condition and is ready for immediate use The Sigma 2‑15 is a benchtop (tabletop) laboratory centrifuge produced by Sigma (Sigma Laborzentrifugen GmbH), designed for moderate-speed separation tasks across various scientific and industrial settings Key Features & Specifications: Purpose: Used to separate sample components (e.g., cells, sediments) through centrifugal force—ideal when high speed isn't required Power & Voltage: Operates at 240 W, 220–240 V, 50 Hz Speed: Centrifuge motor: up to 13,500 rpm. Rotor-specific max: up to 15,300 rpm, depending on rotor type . Capacity: Typical configuration includes 4 buckets, each capable of holding up to 100 ml (e.g., rotor 11192 with buckets 13012) Some versions deploy a fixed-angle rotor (e.g., 12189) with capacity around 480 g Dimensions: Compact footprint of approximately 33 × 43 × 30 cm (W × D × H) . Other Features: Microcontroller-based control of speed and time. Multiple acceleration/deceleration curves and program memory (up to 10 programs) in some configurations Magnetic rotor identification (prevents overspeeding) and induction drive for low maintenance

Condition: like new (used), maximum load weight: 96 kg, load capacity: 77 kg, Reconditioned ATEX centrifuge, model SCA-700. Hjdpfx Agsrrwclozeg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 2,500 h, lifting height: 14,000 mm, overall weight: 1,650 kg, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 01/2025, fuel type: hybrid, fuel tank capacity: 5 l, tire condition: 50 %, maximum load weight: 200 kg, operation weight: 1,650 kg, Self-propelled 14 meter crawler articulated work platform for 200kg and 120kg with electronic scales for sale! only 78cm clearance width and 1.95m clearance height! 2-man basket with 1.4m width, can be removed from the ladder with 2 bolts! Power and compressed air connection is available in the basket and can be used Can be operated almost silently with petrol or 230V power (so work is also possible at weekends) all functions (driving, supporting, lifting etc.) can be done with electricity as well as petrol! Good condition, white non-marking crawlers, every service carried out! functional and ready for use! (currently TÜV expired) a current TÜV inspection can also be issued on request. Hjdpfx Agovmbzqszog If you have any questions, just call or send an email

Condition: used, Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor Hsdpfx Aoi Eg Ncegzsg -Manufacturer: dinamic oil, gearbox type EH201 S 6.2 MO AS -Dimensions: see photos -Total dimensions: Ø 230 x 178 mm -Weight: 29 kg

Condition: used, This listing is for a VWR Mini Star Silverline Centrifuge Hedpfexzhiajx Agzjg

Condition: used, functionality: unexamined, Year of construction: 2007, operating hours: 966 h, machine/vehicle number: 172740708, load capacity: 120 kg, mast type: telescopic, lifting height: 14,000 mm, platform width: 1,400 mm, empty load weight: 1,650 kg, transport length: 4,000 mm, transport height: 1,950 mm, construction height: 1,950 mm, next inspection (TÜV): 02/2024, fuel type: diesel, tire condition: 50 %, Tracked lift, tracked articulated work platform Octopussy 14.12 Twin with 120 and 200 kg basket load capacity, switchable, currently without TÜV inspection but operational with diesel engine, fully hydraulic with 2 hydraulic circuits, 4 hydraulic outriggers. Hjdpfx Aew Aw Ansgzsg

Condition: used, Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor -Manufacturer: dinamic oil, gearbox type EH201 S 6.2 MO A16B Hjdpfx Aji Eg Nvjgzjg -Dimensions: see photos -Total dimensions: Ø 230 x 178 mm -Weight: 29 kg