Used Operating Resolution for sale (29,811)

Year of construction: 2015, operating hours: 2,420 h, condition: ready for operation (used), travel distance X-axis: 300 mm, controller manufacturer: SIEMENS, controller model: 840D, overall weight: 5,500 kg, spindle motor power: 2,000 W, spindle speed (max.): 600 rpm, number of axes: 2, Cylindrical grinding machine manufactured in 2015. This GEIBEL & HOTZ RS 600 C features a maximum swing diameter of 275 mm and a center distance of 600 mm. It is equipped with a grinding spindle motor power of 5.5 kW and operates at speeds ranging from 700 to 2100 rpm. If you are looking to get high-quality grinding capabilities, consider the GEIBEL & HOTZ RS 600 C machine we have for sale. Contact us for further details. • Center distance: 600 mm • Center height: 140 mm • Max swing diameter: 275 mm • Max workpiece weight between centers: 100 kg • Max workpiece torque (flying): 40 Nm (including clamping devices)Workpiece spindle • Taper: MK4 and KK5Tailstock • System: Cylindrical screw pressure spring • Operation: Manual via hand lever • Quill stroke: approx. 40 mm • Taper: MK4Grinding spindle • Arrangement: Left • Motor power: 5.5 kW • Speed: 700–2100 rpm • Bearing: Precision rolling bearings • Lubrication: Lifetime lubricationGrinding wheel • Standard size: 400 × 50 × 127 mm • Bore: 127 mm • Width: 20–50 mm • Taper: 5° • Max diameter: 55 mm (taper reference) • Flange diameter: 175 mm • Speed range: 15–35 m/s (constant cutting speed control)AxesX-axis (= FEEDBACK MOVEMENT) • Drive: Electromechanical with ball screw • Feed rate: 0.01–8000 mm/min • Setup: Electric handwheel or direction push button • Measuring system: Glass scale, internal resolution 0.0005 mmZ-axis (= TABLE MOVEMENT) • Drive: Electromechanical with ball screw • Table speed: 0.01–12000 mm/min • Setup: Electric handwheel or direction push button • Measuring system: Rotary encoder, resolution 0.001 mmControl / Electrical • The control panel is mounted to the machine stand using a swivel bracket. • Control system: Siemens 840D • Drive system: Siemens SINAMICS • Emergency stop components, safety integrated • Motor protection switch, fuses: Siemens • Connectors: WAGO Harting connectors in the work area • Operating voltage: 400 V, 50 Hz, 3 phase • Network type: TN network, without residual current device (RCD) • Control voltage: 230/24 V • Installed electrical power: approx. 14 kW / 18 kVA • Compressed air: Oil-free compressed air, approx. 5 bar • Control cabinet: Air conditioning unit • Electrical cabinet equipment: Interior lighting • Service socket: 230 V / 3 APneumatics / Coolant • Compressed air requirement: approx. 5 bar, oil-free • Coolant tank capacity: approx. 300 L • Coolant pump capacity: 50 L/min at 3.5 bar • Cleaning pump capacity: 20 L/min at 1.5 barOperating data • Operating hours: 2,420 hours Gbedpfxsyzn Dmj Am Aer Additional equipment • Air extraction unit • Capacity: approx. 1000 m³/h • Dimensions: approx. 460 × 840 × 580 mm • Three-jaw chuck • Diameter: 160 mm • Operation: Manual • Weight: approx. 10 kg

Condition: used, mileage: 43,570 km, power: 110 kW (149.56 HP), first registration: 03/2024, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 5,932 mm, total width: 2,020 mm, total height: 2,638 mm, loading space length: 3,273 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Subject to errors and prior sale! Internal Number: 1300. P474509 ----EQUIPMENT * ATTENTION ASSIST * Storage above windshield * Active Distance Assist DISTRONIC * Passenger-side airbag * Airbag: Thorax bag, pelvis bag, and side bag for front passenger * Airbag: Thorax bag, pelvis bag, and side bag for driver in V-shape with single-pole battery main switch * Active Lane Keeping Assist * Acoustic Package in conjunction with MBUX * Engine oil level indicator during cold start * Rear door step * Electrically adjustable and heated exterior mirrors, left and right * Electrically folding exterior mirrors * Exterior mirrors without indicators * Single-pole battery main switch * Front side indicators * Active Brake Assist Godpfx Ajzci Axem Aobr * Ceiling light in cargo/passenger compartment - with door contact * Anti-theft alarm and intrusion alarm system * Digital Owner's Manual * Entry handle on rear right corner pillar * Electrics for trailer socket * Chassis stabilization level I * Vehicle preparation for a trailer load of up to 2000 kg * Brakes: Electric parking brake * 14 V/220 A generator in conjunction with roof air conditioning * Speed limiter 120 km/h * Seat belt reminder for front passenger seat * Grab handle for driver and front passenger entry * Folding lid for storage compartment * Terminal block for electrical connections on the driver's seat base * Tempmatic air conditioning * Instrument cluster with color display * Instrument cluster with color display in V with Brake/Traffic Sign/Distance Assist/MBUX * Comfort roof control panel * LED high-performance headlights * LED light strip in the cargo area * Cargo area lighting via motion detector * Leather-wrapped steering wheel * Cable duct on the rear portal * Cable duct on the side panel * Steering wheel with adjustable tilt and height * Navigation accessories: Live Traffic Information * MBUX multimedia system with 7-inch high-resolution touchscreen 7-inch touchscreen (960 x 540 pixels) AM/FM radio with dual tuner Bluetooth connectivity with audio streaming and hands-free function Smartphone integration via Android Auto or Apple CarPlay Multimedia connection unit for connecting portable devices via a USB-C interface 4 x 25 W output power, tone adjustment, separate volume settings for audio and phone 2-way speakers at the front * Marker lights, side * Steering wheel: Multifunction steering wheel * Navigation Voice control LINGUATRONIC Wi-Fi hotspot Multimedia connection unit for connecting portable devices via an additional USB-C interface Center-fill speaker for improved sound and voice output - improved hands-free function Two-phone operation Digital owner's manual * Navigation: 3 years of free map data updates * Halogen fog lights * Package: Parking package with 360° camera Parking assistant Rear Cross Traffic Alert Drive Away Assist * Configurable special module * Radio: Digital radio DAB * Rain sensor * Tire pressure monitoring - on front and rear axle (wireless) * Spare tire holder under the frame end * Reversing alarm * Double rear door, opening to the side wall * Key: multi-button remote control * Orange seat belts, driver and front passenger * Seats: Driver's seat plus * 5 V USB socket * Blind spot assist * VIN visible from the outside * Traffic sign assist * Switch panel preparation * Heat-insulating glass with band filter on the windshield * Additional rear door lock at 90 degrees * ADAPTIVE ESP * Driver's side airbag * Outside temperature display * Hill start assist * Third brake light * Adapti

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Gbedpfxsvvi N Ie Am Asr

Condition: used, Year of construction: 2006, functionality: fully functional, Technical Data: Machine Class: Compact High-Precision CNC Machine TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 14 [kW] - Spindle speed: 6,000 [rpm] - Max. bar diameter: 42 [mm] - Minimum C-axis resolution: 0.001 [deg] COUNTER SPINDLE - Spindle drive power: 9.7 [kW] - Spindle speed: 5,000 [rpm] - Minimum C-axis resolution: 0.001 [deg] - Travel distance: 330 [mm] TURNING-MILLING SPINDLE - Travel X/Z axes: 425 / 550 [mm] - Travel Y axis: 200 [mm] Godpfx Asv Rw Emsm Asbr - B-axis stroke: -105 / +105 [deg] - Minimum B-axis resolution: 0.001 [deg] - Tool type: HSK40 - Spindle speed: 25,000 [rpm] - Spindle drive power: 10 [kW] TOOL CHANGER - Tool changer type: Belt loader - Number of tools in magazine: 30 ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power requirement: 17 [kW] WEIGHT AND DIMENSIONS - Footprint: 2,548 x 1,922 [mm] - Machine height: 2,686 [mm] - Machine weight: 6,500 [kg] EQUIPMENT - Control system: Num Power 1050 Key Features: High Precision: The S192FT delivers outstanding precision in the machining of demanding components, especially for aerospace, medical technology, and fine mechanics applications. Flexibility: The machine enables both complex milling and turning operations to be performed in a single setup. Compact Design: Ideally suited for manufacturing cells or as a standalone machine for complex small parts. Automation Options: The machine can be combined with robotic cells or automated loading systems. Fields of Application: - Aerospace industry - Medical technology - Precision mechanics - Micro and fine machining - Automotive industry (especially for small, high-precision components) The Bumotec S192FT is an advanced CNC machine offering exceptional precision and flexibility for machining complex parts. It is particularly suited to demanding industries that rely on the highest standards of quality and efficiency.

Condition: used, This listing is for Waters Acquity UPLC Gbedpfxoxx Af De Am Aer The unit is in full working condition and ready for immediate use. The Waters Acquity UPLC is an ultra performance liquid chromatography system designed for rapid, high resolution analytical separations. It delivers excellent sensitivity, reproducibility, and solvent efficiency for pharmaceutical, biotechnology, environmental, food, and research laboratory applications. Transparency Report and Technical Audit Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: ready for operation (used), Year of construction: 2002, overall weight: 7,000 kg, center height: 160 mm, distance between centers: 2,000 mm, controller model: Siematic Rack PC 840, positioning accuracy: 0.001 mm, Automatic reamer tool grinding machine / reaming cutter grinding machine! For grinding the chip chamber and chip face on round reaming tools. TECHNICAL DETAILS Gbedpfxozt Si Us Am Asr Tooth length: 1,700 mm Center distance: 2,000 mm Center height: 160 mm Resolution X-axis: 0.001 mm Resolution Y-axis: 0.001 mm Resolution Z-axis: 0.001 mm Resolution W-axis: 0.001 mm MACHINE DETAILS Axis control: 4 axes Control system: Siemens Rack PC 840 Processor: Pentium 3 Program memory: 20 GB Operating system: Windows 2000 Weight: 7,000 kg EQUIPMENT Simultaneous machining via 2 handwheels

Condition: used, functionality: fully functional, power: 209 kW (284.16 HP), operation weight: 32,264 kg, Year of construction: 2022, operating hours: 4,950 h, Equipment: UVV, Year of manufacture: 2022 Engine power: 284 hp (208.8 kW) Operating weight approx. 32,265 kg Bucket breakout force ISO 204 kN Stick tear force ISO 153 kN Swing speed 9 rpm Max. travel speed 5.2 km/h Rear and side camera LED headlights 3x on the roof (2x front, 1x rear) LED headlights 2x on the boom LED headlight 1x on the tool box Engine: Cummins QSL9-C280 engine Water-cooled, 6-cylinder, with common rail injection and Adblue Stage V Power 209 kW / 285 hp; 2100 rpm 1,472 Nm / 1400 rpm Displacement 8,900 ccm Sensor-controlled idle automatic Gsdpfszaqlijx Am Asbr Cyclone pre-filter Hydraulics: State-of-the-art, optimized, demand-flow-controlled hydraulic system (positive flow controlled) Hydraulic load sensing Max. oil flow 2x 280 l/min Max. oil flow AUX1 500 l/min 1st proportional auxiliary control circuit for grab/hammer on joystick 1 2nd proportional auxiliary control circuit on joystick 2 Safety check valves for stick and boom with overload indicator Quick coupler hydraulic circuit, double-acting Adjustable oil flow rate for attachments Adjustable oil pressure for attachments Convenient switching of hammer/shear hydraulics in the display Hydraulic pre-control of the joysticks 10x additional circuit flow rate settings via on-board computer with multi-function monitor Swing brake 2 travel speeds Upper and lower carriage: Boom 6,150 mm, stick 3,200 mm, max. reach 10,870 mm Heavy-duty undercarriage and equipment with wear strips Steel tracks 600 mm Bucket breakout force ISO 204 kN Stick tear force ISO 153 kN Rear and side camera Battery main switch Fueling pump with automatic overflow protection Tool compartment Driving alarm and rotating beacon LED headlights 3x on the roof (2x front, 1x rear) LED headlights 2x on the boom LED headlight 1x on the tool box Transport dimensions: (L x H x W) 10,667 x 3,225 x 2,990 mm Operator cabin: ROPS Engine emergency stop switch 12V socket Document compartment Radio, Bluetooth-enabled with hands-free function for smartphone with speakers Automatic climate control Heater Tilting front window Large 10" high-resolution touch display Joystick adjustment independent of seat adjustment Floor mat Cup holder Air-suspended seat with fabric cover and seat heating

Condition: used, This listing is for a Agilent Cary 100 UV-Vis spectrophotometer. The unit is in full working condition and is ready for immediate release. The Unit is supplied with a Agilent PCB 1500 Water Peltier System. The Agilent Cary 100 UV-Vis Spectrophotometer is a highly versatile and cost-effective instrument designed for a broad range of laboratory applications, making it an excellent choice for routine research in various fields such as chemistry, biochemistry, and materials science. Gedpfoxxz Scsx Am Asbr Key Features: Double Beam Design: This design enhances accuracy and precision by allowing simultaneous measurement of the sample and reference, mitigating the impact of fluctuations in the light source. Wavelength Range: The instrument operates over a wide wavelength range of 190 to 900 nm, making it suitable for diverse applications, including those that require measurements in the UV and visible spectrum. Variable Spectral Bandwidth: The spectral bandwidth can be adjusted as low as 0.2 nm with variable slits, enabling users to optimize data resolution for specific experiments and applications. High Scanning Speed: With a scanning speed of up to 3000 nm/min, the Cary 100 provides quick data acquisition, enhancing efficiency during experimentation. Superior Photometric Stability: The optical design ensures robust photometric stability, resulting in consistent measurements over time, which is crucial for reproducibility in scientific research. Signal-to-Noise Optimizations: The special signal-to-noise reading mode allows for customizable control over measurement precision, enabling reduced scanning times in high-energy regions and improved averaging in lower throughput conditions. Flexible Operating Modes: Users have the flexibility to operate the spectrophotometer in single, double, or dual single beam modes, adapting the functionality to different experimental needs. Modular Software Control: The Cary WinUV software, which is Windows-based and modular in design, allows users to customize their experience with capabilities like advanced data processing, automatic peak labelling, and enhanced reporting and file transfer options. Accessories and Sample Holders: The instrument can be fitted with a wide range of accessories to extend its capabilities, and it comes shipped with liquid sample holders for immediate use. Benefits: Robust and User-Friendly: The quartz-coated optics not only ensure durability and easy cleaning but also protect against corrosive environments, thereby extending the lifespan of the instrument. Cost-Effective: Designed for routine laboratory work, the Cary 100 provides reliable performance without incurring high costs, making it an economical choice for laboratories. Tailored Experience: The software's modularity allows users to customize their operations and processing tools to fit specific requirements, enhancing productivity and workflow. Versatile Applications: With applications spanning materials testing, petrochemicals, and biotech/pharma studies, this spectrophotometer is a valuable addition to any research setting. The PCB 1500 Water Peltier System is an efficient and precise circulating water bath designed for temperature-sensitive applications in laboratories. Utilizing Peltier technology, this system is ideal for maintaining controlled temperatures for various experiments, particularly in conjunction with thermostatted cell holders. Key Features: Precision Temperature Control: Offers a temperature control pr...

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Distance between tips : 400 [mm] - Effective diameter : 180 [mm] LINEAR AXES - X1 and X2 x Z travel : 220 [mm] - Z travel : 850 [mm] - X x Z resolution : 0.0001 [mm] TURRET : - Number of fixed positions : 12 - Tool holders : VDI30 Gbsdpfx Aevxw A Usm Aor WHEEL CARRIER - Right-hand external grinding : * Grinding wheel dimensions (Ø x width x bore) : 400 x 50 x 127 [mm] * Drive power : 6.8 [kW] WORKPIECE CARRIER - Max. speed : 7500 [rpm] - Speeds (synchronous operation) : 1 - 5000 [rpm] - Taper type : CM4 - Drive power : 10.5 [kW] - C axis : 0.001 [°] SYNCHRONIZED COUNTER SPINDLE - Max. speed : 7500 [rpm] - Rotational speeds (synchronous operation) : 1 - 5000 [rpm] - C axis : 0.001 [°] - Inner cone : MK4 - Micrometric adjustment : +/- 40 [microns] - Drive power : 10.5 [kW] POWER SUPPLY - Power rating : 45 [KVA] DIMENSIONS - Floor dimensions : 2800 x 3960 [mm] - Machine weight : 7600 [kg] MACHINE HOURS - Powered hours : 57000 [h] EQUIPMENT - NC FANUC 310i-modelA - Software Studer WIN - RS232 / USB interface - Remote electronic handwheel - Turret with Renishaw LP2 length self-calibration device - Marposs feelers for diameters (multirange) + Z4 axes for positioning - Semi-automatic wheel balancing MPM.3 BMT100 M.24 - 480 L coolant tank * with paper filter * with magnetic filter - Chip conveyor - Fog extraction - Cooling unit for grinding wheel motor cooling - Electronic contact detection Dittel AE6000 - Fixed dressing device on workhead - Electrical cabinet air conditioning - Balancing shaft - Interface for automatic loading system

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 2 h, Ultimaker Factor 4 – like new / showroom condition This unit has only 2 hours of print time (10 hours total hot time). It was used exclusively as a demonstration printer for a customer who ultimately did not proceed with the purchase. The machine has not been used in production and is in like-new condition. No original packaging. Comes with a full 12-month warranty. UltiMaker Factor 4 specifications: Printing Properties: - Technology: Fused Deposition Modeling (FDM) - Extrusion system: Dual-extrusion, direct drive print head with unique auto-nozzle lifting system and swappable print cores - Build volume: Single/dual material printing: 330 x 240 x 300 mm (13 x 9.4 x 11.8 in) - Filament diameter: 2.85 mm - Print profiles availability: 14+ UltiMaker materials, 250+ marketplace materials - Dimensional accuracy: ± 0.2 mm or ± 0.2% of feature nominal length Hardware Properties: - XYZ resolution: 6.25, 7.8, 2.5 micron - Homing sensor: Optical - Build plate: PEI-coated flexible build plate - Build plate temperature: Up to 120 °C (248 °F) - Build volume temperature: Actively controlled up to 70 °C (158 °F) with nozzle plane temperature uniformity within: ± 3 °C (5.4 °F) for temps < 50 °C (122 °F) ± 5 °C (9 °F) for temps < 70 °C (158 °F) - Extrusion flow: Closed-loop flow compensation - Max. extrusion temperature: 280 °C (536 °F): print cores AA, BB, DD 300 °C (572 °F): print core CC 340 °C (644 °F): print core HT - Closed-loop fans: Air filtering fan, air recirculation fans, part cooling fans, print core cooling fan - Compatible print cores: AA (0.25 mm, 0.4 mm, 0.8 mm) BB (0.4 mm, 0.8 mm) CC (0.4 mm, 0.6 mm) DD (0.4 mm, selected regions) HT (0.6 mm) - Material handling system capacity: 6 bays with NFC recognition (max 1 kg spool size) - Material handling system humidity control: Average relative humidity < 15% under all operation conditions - Microparticulate filtration: HEPA H13 - Emission rates (UFP & VOC): UltiMaker filaments below UL-2904 standards - Monitoring: HDR (high dynamic range) 1920 x 1080 px HD camera - Display: 7-inch touchscreen (1024 x 600 px) Connectivity: - Wi-Fi 2.4 & 5 GHz: IEEE 802.11 a/b/g/n/ac - LAN: Gigabit Ethernet - USB: 2.0 System on Module: - NXP i.MX8 Mini Quad (4 x 1.8 GHz), ARM Cortex-A53, 2 GB LPDDR4, 16 GB eMMC - Real time controller: i.MX RT1064, Arm Cortex-M7 600 MHz, 1 MB SRAM Power Requirements: - 100 – 240 V AC, 50 – 60 Hz max., 6A Physical Dimensions: - Printer: 695 x 605 x 1287 mm (27.5 x 24 x 51 in); 120 kg (265 lbs) - Shipping: 760 x 800 x 1587 mm (30 x 31.5 x 62.5 in); 137 kg (309 lbs) Ambient Conditions: - Operating noise: < 50 dBA - Operating temp: 18 °C – 30 °C (64 – 86 °F); humidity: 30 – 70% RH - Storage: 5 °C – 40 °C (41 – 104 °F); humidity: 20 – 90% RH Software: - Print job preparation: UltiMaker Cura 5.7.1 or newer Gbjdpfxjyvhwie Am Asr - Print job management: UltiMaker Digital Factory - Supported file types: STL, OBJ, 3MF; printable formats: G, GCODE, UFP, STEP - System requirements: Windows 7 (64-bit), Mac OS X 10.12, OpenGL 2.1, 4 GB RAM (8 GB recommended) - Print process reporting: Supported

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, KEYENCE VHX-X1 Digital Microscope | Year of Manufacture 2025 | Like New | Manufacturer's Warranty For sale is a like-new KEYENCE VHX-X1 digital microscope complete system from the current generation of devices. The system was delivered and put into operation in December 2025 and is in excellent technical and optical condition. The manufacturer's warranty is still valid. The new price of the offered configuration is over €103,000 net. The system is suitable for quality assurance, failure analysis, material testing, research and development, reverse engineering, incoming goods inspections, and production-accompanying controls. The combination of high-resolution imaging, automated focusing, motorized XY stage, and integrated 3D profile measurement provides a complete system that is immediately ready for use. Scope of delivery KEYENCE VHX-X1 microscope unit VHX-AX1D control console OP-88885 computer unit VHX-7100 camera unit VH-Z00T objective lens High-performance objective lens VH-Z100 with a magnification range of 100x to 1000x Motorized precision stand VHX-S770E Large motorized XY specimen stage VHX-H6M software module for 3D profile measurements Ring light and illumination adapter OP-88164 Manufacturer's documentation Original accessories Special features Current KEYENCE VHX-X1 generation Year of manufacture 2025 Delivery and commissioning in December 2025 Very little use Manufacturer's warranty available Magnification range up to 1000x Motorized XY stage Motorized swivel head 3D profile measurement included Panorama and stitching function Immediately ready for use No additional investments required Typical applications Metallography Material testing Surface analysis Failure analysis Weld seam inspection Plastic analysis Electronics testing Quality control Research and development Condition Like new Fully functional Very little use Gbedpfx Ameza Tpko Aer Demonstration possible Inspection and functional demonstration by appointment. We will gladly provide further photos, serial numbers and technical information upon request. Availability: immediate Location: Ahrensburg near Hamburg

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, overall weight: 560 kg, total length: 1,870 mm, total width: 1,040 mm, total height: 1,550 mm, compressed air connection: 6 bar, positioning accuracy: 0.01 mm, repeat accuracy: 0.01 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality standards and guarantee the depaneling machine a long service life and high reliability. Made in Germany Semiautomatic depaneling - solutions on demand The LOW 4322 depanelling system enables fast product changeover while maintaining short depanelling and handling times. The insertion of the blank PCB is done with a parallel shuttle, pick-up and fixation with pin clamping technology and if necessary in combination with vacuum suction cups. This machine is equipped with: Godpfx Amoznr Slo Aobr • a shank and disc tool separating module on Z-axis (automatically rotatable 0-90) • X-Y cross stitch module in linear motor technology with high resolution measuring system • 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors • Alu profil frame with two maintenance doors - left and right. • Standard vision system base module for teach-in programming (camera area 400 x 330 mm) • Working area is 420 x 330 mm • Automatic cutter length processing (only in combination with shank separation module) • Remote maintenance/support via remote connection (TeamViewer) or provided by the customer • Touch IPC with Windows operating system • Laser axis measurement incl. protocol • air ionization • Cutter breakage control for end mills only • Preparation for vacuum clamping technology • ESD window and sliding doors Optionally a vacuum cleaner unit can be offered later.

Condition: used, mileage: 348,240 km, power: 220 kW (299.12 HP), number of seats: 34, gearing type: automatic, emission class: euro6, color: red, Year of construction: 2014, Equipment: ABS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (tel. number). Mercedes-Benz Citaro Bus A700 TRACTION CONTROL SYSTEM (ASR), CAN BE DISCONNECTED B021 STATION STOP BRAKE WITH STARTING LOCK B200 OPERATING THE PARKING BRAKE VIA THE BRAKE PEDAL CD01 STEERING DAMPER CN01 ELECTRONIC LEVEL CONTROL (ENR) EB50 REGENERATION MODULE 24 V EB60 CIRCUIT BREAKER AUTOMATA INSTEAD OF FUSE LINKS EB81 SOCKET FOR BATTERY CHARGING (NATO TYPE) IM, EC20 SPEAKER IN THE PASSENGER COMPARTMENT EM11 MICROPHONE FOR DRIVER'S AREA, WITH GOOSENECK, WALL EM30 MICROPHONE ACTIVATION VIA A BUTTON ON THE CONSOLE EU01 SAFETY MAIN SWITCH WITH MUSHROOM BUTTON EW99 ELIMINATION OF ONBOARD DIAGNOSTICS (OBD, INTEGRATED) FA03 LEFT AND RIGHT EXTERIOR MIRRORS, ELECTRICALLY HEATED FA04 LEFT AND RIGHT EXTERIOR MIRRORS, ELECTRICALLY ADJUSTABLE FF20 COMPARTMENT FOR DRIVER'S BAG IN THE DRIVER'S CABIN DOOR FF50 COMPARTMENT FOR FUSES BEHIND THE DRIVER'S SEAT FF55 COMMUNICATION TECHNOLOGY COMPARTMENT ABOVE THE DRIVER'S SEAT FK01 DRIVER'S CABIN WITH DRIVER'S CABIN DOOR Godpfxoyhyiwo Am Aebr FK75 DRIVER'S CABIN DOOR, LOCKING ELECTROMAGNETIC INSTEAD OF MECHANICAL FR05 SUNBLIND ON THE WINDSCREEN, DRIVER'S SIDE FR11 SUNBLIND ON THE DRIVER'S WINDOW, MANUALLY OPERATED FR15 SUNBLIND, WSS, DRIVER'S SIDE ELECTRICALLY OPERATED FS01 INTERIOR MIRROR ON THE HEADLINER, MANUALLY ADJUSTABLE FS20 INTERIOR MIRROR ABOVE THE ENTRY AREA, DOOR 2 FV01 FRONT END DESIGN, CITY BUS, STRAIGHT FRONT FW30 WASHER FLUID RESERVOIR, APPROX. 20 LITERS FZ20 FARE COLLECTION BOX, INTEGRATED IN THE DRIVER'S CABIN DOOR FZ21 ROTARY VENDING MACHINE, 2 PIECES, INTEGRATED IN THE HOUSING FZ60 COIN CHANGER WITH 6 COIN CHUTES (EURO) GA06 AUTOMATIC TRANSMISSION H001 ROOF AIR CONDITIONING SYSTEM, MANUFACTURER KONVEKTA HD01 ROOF HATCHES, ELECTRICALLY OPERATED HF10 ADDITIONAL VENTILATION FOR THE DRIVER'S AREA HH10 BLOWER HEATER FOR THE PASSENGER COMPARTMENT HK01 AIR CONDITIONING SYSTEM FOR THE PASSENGER COMPARTMENT, ROOF-MOUNTED DESIGN HL01 ROOF VENT FOR THE PASSENGER COMPARTMENT HP01 CIRCULATION PUMP FOR HEATING, WITH INCREASED OUTPUT HZ03 AUXILIARY HEATER WITH INCREASED OUTPUT HZ80 CONTROL UNIT HVAC IN EQUIPMENT COMPARTMENT 2 ABOVE JD06 FUEL CONSUMPTION DISPLAY IN THE MULTIFUNCTION DISPLAY JD80 REVERSING WARNING SIGNAL, ACOUSTIC SPEEDOMETER DISPLAY, MEASUREMENT RANGE 125 KM/H JT10 TACHOGRAPH, EG CONTROL UNIT, DIGITAL JW02 WARNING SIGNAL, ACOUSTIC, PARKING BRAKE NOT ENGAGED JW53 FIRE DETECTION SYSTEM, WITH DETECTION CIRCUIT JW80 ACCIDENT DATA RECORDER (UDS) K260 QUICK-RELEASE COUPLING, MANUFACTURER BARTELT K500 EXHAUST PIPE ANGLE TO THE ROAD KB04 ADDITIONAL FUEL TANK, APPROX. 40 L LA11 DAYTIME RUNNING LIGHTS WITH LED TECHNOLOGY MG03 MAXIMUM SPEED, DESIGN-RELATED, 90 KM/H MN56 AUXILIARY DRIVE UP TO 300 NM MQ27 OIL DRAIN ONLY, NO OIL LEVEL DIPSTICK MS09 STARTER MOTOR MELCO 90P55 MZ01 AUTOMATIC ENGINE OIL REFILLING MZ02 ENGINE OIL DIPSTICK MZ03 ENGINE OIL LEVEL INDICATOR IN THE DISPLAY, COMBINATION INSTRUMENT MZ10 DRAIN VALVE FOR COOLANT AT THE LOWEST POINT MZ14 COOLANT REFILLING CONTAINER, ADDITIONAL, WITH ELECTRIC PUMP MZ20 AIR COMPRESSOR, 2 CYLINDERS, REGULATED WITH TWO-STAGE NA03 EXTERNAL DISPLAYS, MANUFACTURER MOBITEC NA32 DESTINATION DISPLAY EVOBUS, LED TECHNOLOGY NF44 STATION STOP DISPLAY, 24 CHARACTERS IN GREEN NH05 SILKSCREEN PRINTING ON THE REAR WINDOW AND MOUNTINGS NH60 NUMBER DISPLAY REAR, MATRIX RESOLUTION 16X28 NT01 CONTROL UNIT EVOBUS, FOR CONTROLLING EXCLUSIVELY NV01 MOUNTINGS AND INSTALLATION OF DIRECTION AND NUMBER INDICATORS NV12 DI

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: TCGL32-190048, number of ink cartridges: 6, color channels: 5, number of print heads: 6, total width: 3,200 mm, type of input current: three-phase, input current: 10 A, input voltage: 400 V, Equipment: documentation/manual, For Sale: D-Gen H12 Printer Combined with Klieverik Calender Godpfozrgfnsx Am Asbr We are offering our D-Gen H12 printer together with a Klieverik calender for sale. Both machines are fully operational and available for viewing until August 13 at our location in Roeselare. D-Gen H12 Printer Highlights: Industrial-grade 3.2-meter wide roll-to-roll printer Printing speed up to 132 m²/h with 12 Ricoh Gen5 print heads High resolution up to 2400 dpi Uses disperse inks suitable for textile printing Advanced features including a powerful drying system, dust removal, and precise tension control for high-quality fabric prints Supports multiple ink colors for vibrant and clear prints Compatible with software such as Ergosoft, Caldera, Wasatch, and Onyx Klieverik Calender: Reliable calender machine from Klieverik, The Netherlands Industrial quality with specifications around 10 kW power, 400V, and 50/60 Hz operation Well-maintained and fully functional The reason for selling these devices is our investment in a new 5-meter dye-sublimation printer to expand our production capabilities. For inquiries, additional details, or to schedule a viewing, please contact us.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 27,875 h, machine/vehicle number: 150204, laser type: CO₂ laser, laser wavelength: 10 nm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser type: CO₂ laser Average power: 200–5,000 W Peak power: up to 6 kW Wavelength: 10.6 µm Beam quality factor M²: < 2.4 (typically 2.1–2.3) Beam divergence: 1.5 mrad (half-angle) Beam diameter at the output: 15 mm (1/e) Beam diameter at the output: 21 mm (full beam) Pulse repetition rate: 0–2 kHz Pulse width: 250 µs Pulse resolution: 70 µs (?) Alignment stability: ± 150 µrad (?) Wavelength: 635 nm Output power: < 1 mW MACHINE DETAILS Ambient temperature: 10–40 °C Gbjdpfszncm Hex Am Aor Relative humidity: < 95% (non-condensing) Connected power: 37 kW Voltage: 400–460 V AC Voltage tolerance: ± 10 % Power connection: 3-phase Required cooling capacity: 45 kW Flow rate: 133 l/min Inlet temperature: 18–20 °C Maximum inlet pressure: 6 bar Nominal inlet pressure: 3 bar Differential pressure: 1.5 bar Cooling medium: Distilled water with 35 % Dowfrost HD Filter fineness: 100 µm Helium purity: 99.996 % Helium proportion: 67.7 % Helium consumption: 13.4–46.8 SLPH Carbon monoxide purity: 99.995 % Carbon monoxide proportion: 4.1 % Carbon monoxide consumption: 0.9–3.0 SLPH Nitrogen purity: 99.996 % Nitrogen proportion: 28.2 % Nitrogen consumption: 5.8–20.2 SLPH Total gas consumption: 20–70 SLPH Maximum proportion of water vapor, hydrocarbons, and oxygen: < 10 ppm Compressed air: dry Compressed air dew point: < 2 °C Operating hours (according to meter): 27,875 h

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Gedpfx Ajxwaz Hom Aobr

Condition: used, mileage: 50,000 km, power: 375 kW (509.86 HP), first registration: 11/2025, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: grey, gearing type: automatic, emission class: euro6, Equipment: ABS, electronic stability program (ESP), navigation system, parking heater, soot filter, Main Components FH Globetrotter safety cab Wheelbase: 3,800 mm Chassis height: MED (medium) Diesel engine 12.8 l, 510 hp/375 kW, 2,550 Nm Rear axle RSS1352B, single reduction, 13 t axle load, GCW 52 t I-Shift AT2612, automated 12-speed gearbox (direct drive), max. input torque: 2,652 Nm Final drive ratio 2.47:1 Retarder Dura-Bright EVO aluminum rims (polished) Front axle tires 385/55R22.5 Rear axle tires 315/70R22.5 Paintwork: Traffic grey B, RAL 7043 Rest package FH, one bed Info and media package with navigation Driver comfort package Side collision avoidance and turn assist (both sides) Near-zone camera on passenger side PTO PTR-DH (high speed), gearbox-mounted, connection: 1 DIN rear for pump Cabin Interior, Living Driver’s seat comfort, air-suspended, heated, seatbelt integrated Two armrests on driver’s seat Armrests covered in leather Passenger seat standard, fixed Foam comfort mattress for lower bunk, firm, foldable, with safety net Basic mattress topper (20 mm) Storage space under bunk Storage compartments above bunk, capacity: 245 l Control console (basic) at bunk (interior light, auxiliary heater, roof hatch and door lock) 33 l refrigerator with freezer compartment under bunk Compartment under dashboard with drawer Bottle holders front and rear Vanity/shaving mirror Two flexible reading lights Interior lighting with dimmer and red night light Side sun visor, driver’s side Interior sun visor, manual roller blind Roof window and emergency exit, manually operated (tinted glass) Curtains for windscreen and windows 2 rubber floor mats Central locking with remote control Cabin auxiliary heater, 2 kW Automatic climate control with sun sensor Cabin interior, Driving Load/axle load indicator in vehicle display Battery monitor in display Leather steering wheel Steering wheel adjustable in height and tilt, with additional steering column adjustment Roof antenna and CB radio prep Digital tachograph, generation 4 Eco cruise control (cruise control) incl. brake cruise control Lane departure warning Battery pulse device Adaptive cruise control (ACC) with collision warning and emergency braking function Immobilizer, transponder integrated in key Gearbox/I-Shift control via driver seat control panel I-See with map-based topography information (high-resolution) Stationary trailer brake active up to max. 7 km/h Electronic stability program (ESP), basic with standard load center of gravity Chassis Rear axle load (technical) max. 13 t Front axle load (technical) max. 7.5 t Parabolic front spring, 2-leaf (standard stiffness) Rear air suspension, 4 air bellows Three ride heights for air suspension 610-liter aluminum tank left 112-liter AdBlue tank right Single battery system: one battery block (2 single cells) for the entire vehicle electrics Two LED work lights rear/top of cab, white Trailer recognition with LED sensor Disc brakes, solid discs on steered axle Air compressor 2-cylinder, 1,100 l/min Retaining bracket (steel) for trailer connections behind cab Jost JSK 42 fifth wheel, cast 1 chock, foldable, front position Gbedpfxjzrrado Am Aer Preparation for work lights rear and side of chassis Connection for external FMS systems Electrical interface for body builders with bodybuilder module in cab Steel bumper Standard rear lights Alternator 150 A Battery box left AGM batteries, 2x210 Ah Aluminum air tanks Cab Exterior Side panels/spoiler kit on cab, wide Roof spoiler Exterior sun visor Roof

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, input voltage: 230 V, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 65 mm, workpiece length (max.): 2,500 mm, workpiece height (max.): 65 mm, workpiece width (max.): 1,000 mm, Equipment: documentation/manual, Stock machine – subject to prior sale! Tactile 3-axis measuring table for fast and precise measurement of flat workpieces. Measuring range: X = 2,500 mm / Y = 1,000 mm / Z = 65 mm Operation | Control | Operating system: 15” touchscreen | HECHT DesQ II software | Windows Measuring range: X = 2,500 mm / Y = 1,000 mm / Z = 65 mm Accuracy: Absolute accuracy X/Y +/- 0.10 mm Typical repeatability X/Y +/- 0.02 mm Relative accuracy Z +/- 0.05 mm Typical repeatability Z +/- 0.02 mm Resolution 0.01 mm Measurement: ⦁ Length, width, thickness (relative) ⦁ X/Y distances ⦁ Angularity ⦁ Parallelism ⦁ Borehole position X/Y ⦁ Borehole diameter ⦁ Borehole depth (relative) ⦁ Radii / diameter ⦁ Groove position ⦁ Groove depth (relative) ⦁ Fold position ⦁ Fold depth (relative) ⦁ X/Y/Z position of horizontal bores ⦁ Depth of horizontal bores (relative) Measuring program: 8-point measurement for 4-sided parts (e.g. rectangle, parallelogram, or trapezoid) Procedure: 8 points of the workpiece are scanned (two points each on every line at the corners) Result: Display of 2 x length (top, bottom), 2 x width (right, left), 4 x angle Protocol: When target values and tolerance specifications are entered, a target/actual comparison is created with deviations and displayed in a table. Storage of the measurement results as a PDF (protocol) or in an SQL database for statistical analysis. Inspection and documentation of the manufacturing status in the production process, after cutting, after edging or after drilling the workpieces, depending on the value-added process. Vacuum system (Venturi principle) 6 vacuum suction cups integrated in the measuring field fix the workpiece during the measuring process. Technical data: Dimensions (L x W x H): approx. 2,950 mm x 1,050 mm x 2,090 mm Weight: approx. 450 kg Power connection: 230 V Compressed air connection: 6 bar Air consumption: 90 l/min Operation/Control 17” Touchscreen HECHT DesQ II software Windows 11 Gbedpfx Amozr Ud So Asr

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, input voltage: 230 V, measuring range X-axis: 2,750 mm, measuring range Y-axis: 1,250 mm, measuring range Z-axis: 85 mm, overall weight: 2,600 kg, Measuring range: 2,750 x 1,250 mm Demonstration machine – subject to prior sale - Operating system: Windows 11 For measuring external dimensions and performing one-sided inspections of vertical and horizontal boreholes in plate-shaped workpieces. APPLICATION AREA: Tooling aid: Measurement of the first production part Sample inspection: Measurement of samples MEASUREMENT CRITERIA: Dimensions: Length, width, angle Borehole, vertical: Position, diameter, depth, borehole spacing Borehole, horizontal: Position, diameter, depth, distance to the top of the plate. (NOTE: Test pins or inserted dowels are required). Godpfx Aozr Udrsm Asbr Groove: Edge distance, width, depth Radius: Center point position, radius Flange: Width, depth Recesses: Width, edge distance Technical data: Workpiece length (X-axis) min./max.: 180 mm – 2,750 mm Workpiece width (Y-axis) min./max.: 50 mm – 1,250 mm (Note: the measurement of vertical and/or horizontal boreholes as well as grooves and flanges on the Y-axis is possible up to the position 1,150 mm) Workpiece thickness (Z-axis) min./max.: 5 mm – 85 mm NOTE: Other sizes available on request. Accuracy: +/- 0.1 mm Resolution: 0.01 mm (NOTE: Consistent lighting conditions are required to maintain accuracy - independent of daylight) Measuring plane: High-precision, ground granite plate 3,200 x 1,340 x 150 mm Working height above floor: approx. 1,000 mm +/- 50 mm Space required approx. L/W/H: approx. 5,000 mm / 2,000 mm / 1,700 mm Weight approx.: 2,400 kg + control cabinet including control panel approx. 200 kg Total electrical connection: 2500 W Compressed air connection: 6 bar Operating side: left Operating voltage: 230 V / 16 A – (CEE7/7) Network connection: RJ45 Ambient temperature: max. 35 degrees Celsius (NOTE: At higher temperatures, an air conditioning unit in the control cabinet is recommended – available as an option.) Subject to technical changes. The above performance data assumes that suitable workpieces are used. Scope of supply: ⦁ Automatic measuring table with 2-axis servo drive ⦁ Automatic camera height positioning ⦁ 1 x Software license CAD4U and Hecht interface for creating measurement programs on a PC in the preparation area ⦁ 19" PC with CAD4U software license and interface for creating measurement programs, current software version Results and driver for measurement program execution, image processing software ⦁ Camera, lens and lighting for image acquisition ⦁ Operating system Windows Ultimate 64-bit ⦁ Rittal PC cabinet 600x1600x650 mm (W x H x D) ⦁ Test pins for measuring the lateral boreholes: 10 pieces each with diameters 5, 6, 8 ⦁ 4 x right-angle brackets for black parts ⦁ SQL Express database installed on the machine computer Languages: The operating software is available in the following languages: German, English, French, Italian, Spanish, Flemish, Polish, Lithuanian, Russian and Chinese. Other languages available on request. SAFETY AND PROTECTION DEVICES EMERGENCY STOP switch All machines for EU member states with CE marking according to EC Machinery Directive 2006/42/EC Technical documentation stored on PC The measuring table must be completely separated by a protective fence. This and other protective devices are not included in the scope of supply.

Condition: used, This listing is for Olympus BX51TF Upright Microscope The unit is in full working condition and ready for immediate use This upright microscope is a robust system designed to provide accurate and consistent performance for high-resolution biological imaging applications. Manufactured by Olympus, this reliable unit is an excellent addition to any modern facility looking to expand its optical capabilities. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Gbjdpfxszqf N As Am Aer Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, Year of construction: 2019, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable 500 mm control DA 66T oil volume 150 ltr. voltage 380 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm current new price approx. 65.000 euros very rarely used! Special price on request - in checked condition - machine video - ?v=KRifrqTgkVU ----- SPEED BEND PRO CNC press brake: * increased installation height * increased cylinder stroke Gsdpfxozlulpj Am Aebr * and increased bending beam speeds ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-66T" graphics/touchscreen * 2D graphic touchscreen programming mode * 3D representation in simulation and production * 17" color TFT screen with high resolution * Bending sequence calculation * Product programming and representation in actual size * USB interface - CNC controlled axes: Y1 - Y2 - X - R - CNC electro-motorized back stop (X axis) * on ball screws * Travel path .. 500 mm * Travel speed .. 500 mm/s * with 2x manually adjustable stop fingers - CNC electro-motor height adjustment (R axis) * Travel path .. 250 mm * Travel speed .. 350 mm/s - AMADA/PROMECAM upper tool holder * including clamping jaws with upper wedge camber * 1x ROLLERI split set 60° upper tool - AMADA/PROMECAM lower tool holder * including 1x die shoe "C 1050-R" * 1x AMADA 1-V die 85° - Safety device at the rear (door including safety switch) - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser protection device in front of the machine - 2x front support arms with SLIDING system (HIWIN plain bearings) - 1x freely movable double foot control - CE mark / Declaration of conformity - Operating instructions including circuit and hydraulic diagram

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 2,974 h, load capacity: 2,500 kg, lifting height: 4,900 mm, free lift: 1,318 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,250 mm, motor manufacturer: ELECTRIC, gearing type: hydrostat, battery capacity: 930 Ah, remaining battery capacity: 95 %, battery voltage: 48 V, fork carriage width: 1,400 mm, fork length: 1,150 mm, fork width: 180 mm, fork thickness: 45 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 X 7 X 10 1/2, rear tire type: cushion tires (black), rear tire size: 559 / 254 - 406, overall weight: 9,420 kg, empty load weight: 6,920 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: orange, Equipment: CE marking, all wheel drive, cabin, head guard, lighting, pallet forks, sideshift, # COMBILIFT CBE2500 | ELECTRIC | TRIPLEX 4900 MM | FREE LIFT | FORK POSITIONER | FULL CAB | READY TO WORK ## ✅ FULLY SERVICED | WARRANTY | WORLDWIDE DELIVERY Are you looking for a forklift that starts generating value from day one, rather than creating unexpected maintenance costs? The COMBILIFT CBE2500 is fully serviced, thoroughly inspected, and ready for immediate operation. Whether you work in manufacturing, warehousing, steel processing, or timber handling, this machine is prepared to perform from the moment it arrives. --- ## ⭐ Key Advantages ✔ Fully serviced before delivery ✔ Start-up warranty included ✔ Brand-new super elastic tires ✔ Excellent mechanical and cosmetic condition ✔ Ready to work with no additional investment required ✔ Live online video inspection available ✔ Direct delivery to your facility anywhere in the world --- # 📋 Technical Specifications 🏭 Manufacturer: COMBILIFT 📌 Model: CBE2500 📅 Year of Manufacture: 2018 ⚡ Power Type: Electric 🏋️ Load Capacity: 2,500 kg ⏱ Operating Hours: 2,974 h ⬆️ Mast: Triplex 📏 Lift Height: 4,900 mm ↔️ Fork Positioner: 1,400 mm 📐 Fork Length: 1,150 mm 🚜 Cab: Fully Enclosed & Heated ⚖️ Operating Weight: 6,920 kg --- # 📐 Dimensions 📏 Overall Height: 2,250 mm 📏 Overall Length: 1,550 mm 📏 Overall Width: 1,500 mm 📏 Lowered Mast Height: 2,250 mm --- # 🛞 Tires Front: 16 x 7 x 10 1/2 Rear: 559 / 254 - 406 ✅ Condition: 100% Brand New --- # 🔧 Equipment ✅ Fork Positioner ✅ Side Shift ✅ Free Lift ✅ Fully Enclosed Heated Cab ✅ Working Lights --- # 🏭 Ideal Applications 🌲 Timber Industry 🏗 Steel Mills & Steel Service Centers 🏭 Structural Steel Manufacturers 📦 Handling Pipes, Profiles & Long Materials 🏢 Indoor & Outdoor Operations --- # 🌍 Why Choose FT LOGISTICS? When you buy from FT LOGISTICS, you are purchasing from a company specializing exclusively in: ✔ Forklifts ✔ Sideloaders ✔ Multidirectional Forklifts ✔ Warehouse Equipment Every machine undergoes a comprehensive technical inspection, professional servicing, and operational testing before delivery. We maintain an inventory of 100+ machines available for immediate shipment and deliver equipment to customers throughout: 🌍 Europe 🌎 South America 🌍 Africa 🌏 Asia 🌍 Middle East --- Gjdpsztrz Dsfx Am Ajbr # 🤝 What We Offer 🔧 Complete Pre-Delivery Service 🛡 Warranty 👨‍🔧 Professional Technical Advice 💳 Leasing & Financing Solutions 🚛 Worldwide Transport 📄 Export Documentation & Customs Clearance 🤝 After-Sales Support --- # 📹 Need More Information? We can provide: 🎥 Live Online Machine Demonstration 📷 Additional High-Resolution Photos 🎬 Detailed Videos 📋 Customized Transport Quotation 🌍 Worldwide Shipping Solutions --- ## ⭐ Why Our Customers Choose Us Hundreds of companies across Europe and worldwide trust FT LOGISTICS for reliable, work-ready equipment. Our customers return because they know they receive professionally prepared machines backed by expert support and international logistics experience. --- # FT LOGISTICS ### 🚛 We Deliver Machines Ready to Work. Professional Forklifts | Sideloaders | Multidirectional Forklifts | Warehouse Equipment | Worldwide Export

Condition: new, Year of construction: 2026, TITAN DOUBLE Trade Industrial Company AB is a Polish manufacturer of modern professional equipment trusted by professionals in over 55 countries worldwide. Industrial printer TITAN DOUBLE is designed for inkjet large format contactless full-color CMYK printing. OUR ADVANTAGES = YOUR BENEFITS: TITAN DOUBLE The new printing machine from TICAB PRINT has two print heads. Now, you can print in a single pass on large items. Your benefits: • Enhanced workflows. • Wider range or samples to print on. • More comfort during printing. We are official partners of the Hewlett Packard Company. You can get the TITAN DOUBLE printing machines at the manufacturer’s price. Online education and full technical support is provided. KEY FEATURES of TITAN DOUBLE: 1) Average printing speed is 50 units per minute. 2) The opportunity to print from 1 copy without increased cost per piece. 3) No preparations or cliches are needed. 4) Low cost per copy is from 0.01 euro/unit (you will see an accurate amount on the monitor during printing). 5) Printing on different materials: paper, carton (assembled and disassembled boxes), textile, wood, and plywood. 6) Branded software from TICAB PRINT (included in the printer's price). 7) Printer's components and accessories of our own design and production. TITAN DOUBLE is an innovative printing system. It allows you to feed huge items beneath the printer head. Printer heads can be adjusted up to 10 cm above the conveyor belt. High quality Hewlett Packard HP pigment ink provides resistance to the fading, scratches. and water after the image dries. Technical Characteristics of the Printer head: Print area width - up to 59.4cm (23.4 in) Print area length - from 2.54 cm (1 inch) to 91.44 cm (36 inch) Workpiece movement speed - up to 45.72 cm (18 in) per second Printing speed - up to 50 arc\ min A4, up to 16 arc\ min A3 Print resolution - 1200x1200dpi Colors - CMYK (Cyan, Magenta, Yellow, Black) Gedpfevt Uvzox Am Aebr Ink type - water-based pigment ink Information connection - Ethernet 10/100/1000 Base-T network port Operating system - Windows (recommended Windows10) Hewlett Packard HP driver TICAB software: The current status of the printer is being monitored. Number of prints is calculated - the total and the current task. The calculation of the value of ink consumption. Monitoring the current level of ink in the cartridges. Starting the printer nozzle maintenance and cleaning functions. Starting the procedures for replacing the cleaning mechanism. Calibrate the printer nozzles for linearity and color uniformity. Start the procedure for high-speed printing of a large number of copies.

Condition: new, Year of construction: 2026, functionality: fully functional, Ticab Printing System TPS is an innovative cantilever equipment. It allows feeding huge items beneath the print head. The print head can be adjusted up to 30 cm above the conveyor belt to feed folded cardboard boxes or other huge items. High quality Hewlett Packard HP pigment ink provides resistance to the fading, scratches and water after the image dries. Call us to get a beneficial commercial offer. Specifications:  Print area width: up to 29.7cm (11.7 in)  Print area length: from 2.54 cm (1 inch) to 91.44 cm (36 inch)  Workpiece movement speed: up to 45.72 cm (18 in) per second Gsdsu Ibhwopfx Am Aobr  Printing speed: up to 50--70 copies\min A4, up to 16 copies\min A3  Print resolution: 1200x1200dpi  Number of inkjet nozzles: 59136 (14 printing zones of 4224 nozzles each)  Colors: CMYK (Cyan, Magenta, Yellow, Black)  Ink type: water-based pigment ink  Information connection: Ethernet 10/100/1000 Base-T network port  Operating system: Windows (recommended Windows10)  Hewlett Packard HP driver  Trusted by professionals in 55 countries worldwide!

Condition: ready for operation (used), Year of construction: 2003, operating hours: 13,028 h, spindle speed (max.): 9,000 rpm, total height: 2,140 mm, total width: 1,520 mm, overall weight: 3,000 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle motor power: 13,000 W, product length (max.): 2,000 mm, number of slots in tool magazine: 16, number of axes: 5, This 5-axis DECKEL MAHO DMU 50T was manufactured in 2003. It features a 3+2 axis setup with CNC-driven linear axes and a manual swivelling rotary table for enhanced versatility. The machine comes equipped with tools and an attached tool list holder for convenience. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 50T universal machining centre we have for sale. Contact us for further details. - Main Drive Speed Range: 20 - 9,000 rpm (infinitely variable)- Main Drive Power (100% ED): 9 kW- Main Drive Power (40% ED): 13 kW- Tool Holder: SK 40 DIN 69871- Pull Stud: DIN 69872 or ISO 7388/2 Type A- Tool Changer Magazine Capacity: 16 pockets- Max. Tool Diameter: 80 mm (130 mm with free neighboring pockets)- Max. Tool Length from Spindle Nose: 290 mm- Max. Tool Weight (Automatic Change): 6 kg- Max. Total Tool Weight in Magazine: 80 kg- Rigid Table Clamping Surface: 700 x 500 mm- Table Swivel Range (B-Axis): +95° / -10°- Table Rotary Range (C-Axis): 360°- Max. Permissible Table Load: 200 kg- Feed Rate (X, Y, Z): Infinitely variable up to 10,000 mm/min- Rapid Traverse (X, Y, Z): 12 m/min- Input Resolution (X, Y, Z): 0.001 mm- Position Tolerance (X, Y, Z): 0.010 mm- Operating Voltage: 400 V AC (+6% / -10%), 3N/PE, 50/60 Hz- Power Consumption (100% ED): 17 kVA- Nominal Current (100% ED): 28 A- Recommended Network Fuse: 35 A- Pneumatic Supply Pressure: 5.5 - 8.0 bar- Compressed Air Consumption (without Blast Air): 7 m³/h- Compressed Air Consumption (with Tool Blast Air): 20 m³/h- Max. Setup Weight (Machine + Workpiece + Tools + Coolant): approx. 3,400 kg- Included Equipment: Electronic handwheel HR 410 (Optional), central lubrication system, coolant unit, tool list holder on enclosure wall Technical Specification Taper Size SK 40 Gjdjzmhwzepfx Am Aebr