Used Operating Resolution for sale (29,307)

Condition: used, functionality: fully functional, power: 209 kW (284.16 HP), operation weight: 32,264 kg, Year of construction: 2022, operating hours: 4,950 h, Equipment: UVV, Year of manufacture: 2022 Engine power: 284 hp (208.8 kW) Operating weight approx. 32,265 kg Bucket breakout force ISO 204 kN Stick tear force ISO 153 kN Swing speed 9 rpm Max. travel speed 5.2 km/h Rear and side camera LED headlights 3x on the roof (2x front, 1x rear) LED headlights 2x on the boom LED headlight 1x on the tool box Engine: Cummins QSL9-C280 engine Water-cooled, 6-cylinder, with common rail injection and Adblue Stage V Power 209 kW / 285 hp; 2100 rpm 1,472 Nm / 1400 rpm Displacement 8,900 ccm Sensor-controlled idle automatic Cyclone pre-filter Hydraulics: State-of-the-art, optimized, demand-flow-controlled hydraulic system (positive flow controlled) Hydraulic load sensing Max. oil flow 2x 280 l/min Max. oil flow AUX1 500 l/min 1st proportional auxiliary control circuit for grab/hammer on joystick 1 2nd proportional auxiliary control circuit on joystick 2 Safety check valves for stick and boom with overload indicator Quick coupler hydraulic circuit, double-acting Adjustable oil flow rate for attachments Adjustable oil pressure for attachments Convenient switching of hammer/shear hydraulics in the display Hydraulic pre-control of the joysticks 10x additional circuit flow rate settings via on-board computer with multi-function monitor Swing brake 2 travel speeds Upper and lower carriage: Boom 6,150 mm, stick 3,200 mm, max. reach 10,870 mm Heavy-duty undercarriage and equipment with wear strips Steel tracks 600 mm Bucket breakout force ISO 204 kN Kedszaqliepfx Airjdn Stick tear force ISO 153 kN Rear and side camera Battery main switch Fueling pump with automatic overflow protection Tool compartment Driving alarm and rotating beacon LED headlights 3x on the roof (2x front, 1x rear) LED headlights 2x on the boom LED headlight 1x on the tool box Transport dimensions: (L x H x W) 10,667 x 3,225 x 2,990 mm Operator cabin: ROPS Engine emergency stop switch 12V socket Document compartment Radio, Bluetooth-enabled with hands-free function for smartphone with speakers Automatic climate control Heater Tilting front window Large 10" high-resolution touch display Joystick adjustment independent of seat adjustment Floor mat Cup holder Air-suspended seat with fabric cover and seat heating

Condition: excellent (used), Year of construction: 2019, operating hours: 15,708 h, machine/vehicle number: 700167604, type of input current: three-phase, We offer this Bühler SORTEX A MultiVision I grain sorting machine in very good condition, manufactured in 2019. Ksdpfx Aezbh Hmjirsdn Manufacturer: Bühler Model: SORTEX A MultiVision I Year of manufacture: 2019 The Multi Vision high-resolution inspection system focuses on the slightest color variations as well as light and dark color defects. The patented PROsize technology sorts products and foreign materials that have the same color as the quality product, using size characteristics. The machine is equipped with near-infrared spectroscopy (NIR) technology for visual color analysis. This allows the sorter to detect defective pieces or foreign objects of any color, even black. It also enables the detection of color defects. The machine is equipped with a new optical sorter, which achieves up to 50% higher rejection rates. SpectraVision was designed to provide maximum yield. Newly designed internal full-color cameras provide the best color resolution even for the smallest color defects, while new InGaAs cameras take the detection of foreign material (FM) to a new level. Innovative ejection algorithms significantly minimize false rejects, and new calibration and tracking algorithms improve machine consistency and reduce the number of false rejects. Default modes and programs for each product are pre-set and tested by SORTEX experts for optimal machine settings right out of the box. A simple user interface design and individual sensitivity control for each defect make it easy for the operator to maintain optimal machine performance. The machine's performance can be monitored from anywhere in the world, in accordance with Industry 4.0 standards. Machine setting changes are recorded and stored in the Bühler Insights system, and the SORTEX monitoring system enables real-time monitoring of sorting performance and emergency alerts.

Condition: new, power: 345 kW (469.07 HP), fuel type: diesel, overall weight: 37,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Kedsy Uwuzopfx Airedn Excerpt from the equipment list. Complete equipment list available upon request. * Chassis height: XHIGH (extra high); please refer to VBI/WIS for precise height dimensions (depending on tire size) * Rear axle suspension: B-RIDE * Safety day cab: FMX * Exhaust emissions according to Euro 6, with SCR, particulate filter, and exhaust gas recirculation * Diesel engine: 12.8 l, 469 hp/345 kW, 2,346 Nm * Fuel type: Diesel - Volvo Engine Brake+ (VEB+) * Braking performance: 340 kW/462 hp (D13S), 430 kW/585 hp (D13T/TURBO-TC), or 525 kW/714 hp (D17A). Complies with ADR braking regulations * I-Shift AT2612, automated 12-speed gearbox (direct gear), max. input torque: 2,652 Nm * Drive axle: RTH2610B. Double-axle hub reduction. 4 planetary gears. Longitudinal and transverse differential locks * Selected driver comfort package * Roof window and emergency exit, manually operable (tinted glass) * Construction site package for FMX short cab * Parabolic front suspension, 3-leaf (greater stiffness) * Max. front axle load: 16.0 t (technical) * Max. rear axle load: 21 t (technical) * Conventional rear suspension * Volvo Dynamic Steering (VDS). Active, electronically controlled power steering * Volvo Dynamic Steering/steering assistance system, basic version - two-circuit power steering * Disc brakes, solid discs * EBS, electronic braking system, medium package * Parabolic rear suspension (conventional stiffness) * 275 l fuel tank, left, between double front axles, plastic * AdBlue tank, usable capacity: 57 l, between the front axles * Trailer coupling, centrally mounted * Trailer coupling with D-value = 190 kN for G-150/G-260 hole pattern * Front axle tires: 385/65R22.5: for FAL10 (front axle with 10 t load capacity) * Rear axle tires: 315/80R22.5 - tire pressure monitoring system with internal sensors * On-board diagnostics * Euro 6, Phase E * Gearbox/I-Shift operation via control unit on the driver's seat * I-Shift driving mode: Standard, Performance, and Economy * I-See with map-based topography and traffic information (high resolution) * Eco-cruise control, including brake cruise control * Manual shifting possible in automatic mode (including kickdown function) * Hydraulic pump Parker F1-81, rear of the engine * High instrument panel with digital, fully dynamic driver information display, 4 selectable views, with traffic sign recognition (in conjunction with lane keeping assist) * Size: 12 inches with chrome trim * Digital tachograph, Generation 4 * Speed limiter 90 km/h * Electronic stability program (ESP), basic version for solo vehicles and combinations with normal load center (loaded) and semi-trailers with ABS/EBS trailer * Adaptive traction control * Collision warning with emergency braking function (for stationary and moving objects) * Emergency braking assistant can be deactivated * Lane departure warning with steering assistance * Lane keeping assist can be deactivated * Side collision avoidance and turning assistant with braking function, on both sides * Turning assistant can be deactivated * Driver warning system according to GSR standard, fatigue monitoring * Air conditioning with automatic temperature control and sun sensor * Engine start via key (scope of delivery: 3 keys and 2 remote controls) * Radio recep

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm Kdodsfxygwopfx Airjn pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two pressure cylinders. The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: W202001, table length: 800 mm, table width: 550 mm, Equipment: documentation/manual, H-Frame Press – 30 t – Double-column Press – 800 × 550 mm – Versatile Assembly & Production Press For sale: hydraulic double-column press (H-frame press) with a pressing force of 30 t. The machine is highly versatile and can be used as an assembly press, small batch press, hand-loading press, vulcanizing press, or heated platen press. This is an approximately 2.5-year-old, unused machine with zero operating hours, offered with full warranty. Inspection is possible at our warehouse in Ennepetal. ===== Technical Specifications & Information: Hydraulic Double-Column Press – 30 t ==== General Information - Design: Double-column press (H-frame) - Pressing force: 5–30 t (adjustable) - Machine weight: approx. 2,000 kg - Paint finish: RAL 7035 (Light Grey) / RAL 2009 (Orange) ==== Working Area - Table size: 800 × 550 mm (additional variant: 700 × 500 × 70 mm) - Ram plate: 700 × 500 × 80 mm - Max. distance table/ram: 500 mm - Stroke: 500 mm - Front opening width: 820 mm - Table height: 800 mm ==== Speeds - Approach speed: approx. 45–50 mm/sec - Return speed: approx. 40–55 mm/sec ==== Hydraulics - Operating pressure: up to 300 bar - Hydraulic pump: ASC, 28.5 l/min - Motor power: 11 kW - Oil tank: approx. 100 l - Valves: Bosch Rexroth ==== Construction & Guidance - Cylinder: Ø 110 mm (piston), Ø 70–75 mm internal - Guide columns: Ø 50 mm - Ram guided by 2 columns - Robust machine frame - Rear and side guards fully enclosed ==== Control & Operation - Pressing pressure adjustable via rotary control - Adjustable two-hand operation (3 m supply cable) - Position limitation via cam switch - Travel limitation via movable sensors - Automatic positioning to defined stroke points - Resettable piece counter ==== Safety - Light curtain 500 mm (14 mm resolution, finger protection) - Reach-under protection - Optional reach-over protection - Emergency stop switch - Certified safety inspection ==== Equipment - Control cabinet technology from brand manufacturers - Illumination in press workspace - Eject chute in table ==== Options - Heated platens: 500 × 500 mm (up to 200 °C, with controller & timer) - Commissioning & operator training Kdsdpfju U Ey Iox Airsn ==== Lead Time & Service - Delivery time: approx. 6 weeks (without heated platens) - Heated platens: approx. 8 weeks - Customer service: Dresden, Hamburg, Ennepetal, Waibstadt, Göppingen, Gelsenkirchen ===== Assembly work, small batch production, forming applications, vulcanizing, hot pressing Hydraulic press, hydraulic press, double-column press, H-frame press, assembly press, small batch press, vulcanizing press, heated platen press, industrial press Are you looking for a hydraulic press customized for your application? Contact us for a tailored offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC regulations, and EU safety standards. Additionally, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian occupational safety standard NR 12, which builds upon these regulations. Our core strengths are special machine engineering and press automation. We offer custom-built hydraulic presses at surprisingly attractive prices. The hydraulic systems primarily use components from leading European manufacturers.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 400181806, Mitutoyo CV-3200H4 CONTOUR MEASURING CONTRACER; MFG: 2018, code no.: 218-482-10D, SN: 400181806, made in Japan. Expands measurement range while reducing workpiece interference. Mitutoyo’s newly designed detector arm lowers workpiece interference while expanding the measurement range in the Z1 axis (detector). Auto stop feature assures safety even during high-speed movement The detector includes a safety mechanism (auto stop upon collision) to assure measurement safety even during high-speed movement. If the arm is removed or shifts during measurement, the safety mechanism is triggered and stops the machine. Measuring range: X axis -100mm Measuring range: Z2 axis (column) travel range 3 - 60mm (±30mm in horizontal situation) Z2 axis (column) travel range: 3 - 500mm Detector (Z1 axis (detector unit)) Kdsdpfowz Sxnsx Airen Scale unit - Arc scale Resolution 0.04µm Stylus up/down motion: arc movement Measuring direction: both pulling and pushing directions Measuring face direction: downward or upward Measuring force: 30mN (by adjusting weight) Stylus traceable range: Ascent 77°; Stylus traceable range: Descent 83° (with one-sided cut stylus: standard accessory); Drive unit Scale unit: Separate type linear encoder Z2 axis (column) ABS encoder Resolution X axis 0.05µm Resolution Z2 axis (column)1µm Drive speed X axis 0 – 80mm/s and manual operation Drive speed Z2 axis (column) 0 – 30mm/s and manual operation Measuring speed X axis 0.02 – 20mm/s; Straightness (when the X axis is horizontal) X axis 0.8µm/100mm X axis inclination angle: X axis ±45° Accuracy (20°C) CV-3200 X axis ±(0.8 + 0.01L) µm L = Drive length (mm) Wide range: 1.8µm/100mm Narrow range: 1.05µm/25mm; Accuracy (20°C) CV-3200 X Z1 axis (column) ± (1.4 + | 2H | /100) µm H = Measurement height from the horizontal position; External dimensions (W×D×H): Main unit: 756×482 ×1166mm External dimensions (W×D×H): Controller: 221×344×490mm External dimensions (W×D×H): Remote box: 248×102×62.2mm Mass: Main unit: 150kg Mass: Controller: 14kg Mass: Remote box: 0.9kg Operating temperature range: 15 – 25°C (within ±1K temperature fluctuation on calibration and measurement) Operating humidity range: 20 – 80%RH (with no condensation) Rvcunpih32 Storage temperature range: −10 to 50°C Storage humidity range: 5 – 90%RH (with no condensation) Price: 12.700 Euro + VAT, negotiable, Ex Works Oradea, Romania. Please make an offer. Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale /

Year of construction: 2022, condition: like new (used), Memmert ICH 750 chamber from 2022, like new. Kdjdpfx Aiezam H Aorjn Demonstration unit with a one-year warranty on spare parts. Description: Temperature setting range -10 to +60 °C Operating temperature range from -10°C to +60°C without humidity (not suitable for long-term storage at temperatures below zero. Ice may form on the glass door during continuous operation) Operating temperature range from +10°C to +60°C with humidity and/or light Temperature setting accuracy 0.1 °C Temperature sensor 2 Pt100 DIN Class A sensors in a 4-wire circuit for mutual monitoring, taking over functions in case of a failure Humidity Humidity humidity supply using distilled water from an external tank via a self-priming pump Humidification humidification using a hot steam generator Humidity active humidification and dehumidification of the air, adjustable in the range of 10-80% relative humidity with a digital display of relative humidity - display resolution 0.1%, setting accuracy 0.5%

Year of construction: 2021, condition: like new (used), Memmert ICH 260 chamber, manufactured in 2021, in like-new condition. Ksdpfx Aiszam Hvsrsdn This unit was used for display purposes. One-year warranty on spare parts. Manufacturer’s description: Operating temperature range without humidity: 0 to +60 °C Temperature setting range 0 to +60 °C Operating temperature range +10 °C to +60 °C with humidity and/or light Temperature setting accuracy 0.1 °C Temperature sensor 2 Pt100 DIN Class A sensors in a 4-wire circuit for mutual monitoring, taking over the function in case of an error Humidity Humidity humidity supply using distilled water from an external tank via a self-priming pump Humidification humidification using a hot steam generator Humidity active humidification and dehumidification of the air, adjustable in the range of 10-80% relative humidity with a digital display of relative humidity - display resolution 0.1%, setting accuracy 0.5%

Year of construction: 2021, condition: excellent (used), Memmert ICH 260L chamber from 2021. The unit comes with a one-year warranty on spare parts. Manufacturer's description: Temperature Operating temperature range without humidity: 0 to +60 °C Kdodpjzam Hiefx Airsn Temperature setting range 0 to +60 °C Operating temperature range from +10 °C to +60 °C with humidity and/or light Temperature setting accuracy 0.1 °C Temperature sensor 2 Pt100 DIN Class A sensors in a 4-wire circuit for mutual monitoring, taking over functions in case of an error Humidity Humidity humidity supply using distilled water from an external tank via a self-priming pump Humidification humidification using a hot steam generator Humidity active humidification and dehumidification of the air, adjustable in the range of 10-80% relative humidity with a digital display of relative humidity - display resolution 0.1%, setting accuracy 0.5% Light Daylight and ultraviolet light can be programmed individually using the controller Light cold white light +/- 6%, for UV light +/- 10% Light lighting unit consisting of 4 cold white fluorescent lamps (standard D65 lighting, 6500 K) and 2 UV lamps in the spectral range of 320-400 nm

Condition: like new (used), Year of construction: 2024, operating hours: 120 h, functionality: limited functionality, For sale is a high-quality digital microscope, the KEYENCE VHX-7000 – a fully integrated system for material analysis, defect analysis, quality control, research, and industrial inspection. The VHX-7000 combines ultra-high-resolution 4K imaging with intuitive operation and advanced measurement functions, including automatic focus stacking, image stitching, 2D/3D measurements, and multi-angle observation. As one of the world's first digital 4K ultra-high-precision microscopes, the system delivers exceptional image quality at SEM level while combining the speed and ease of use of optical microscopy. Included configuration: Main system: KEYENCE VHX-7000 Controller Unit Camera: KEYENCE VHX-7020 High-Performance Camera Optics & Adapter: KEYENCE VH-Z20T Zoom Lens / Objective (20x–200x) KEYENCE VH-K20 360° Multi-Function Side View Adapter Ksdpfxey U Iy Ie Airedn KEYENCE VHX-20T Tripod Adapter Mechanical components: KEYENCE VHX-S750E Motorized XYZ Stage (40 mm) Software & Accessories: KEYENCE VH-H5M 3D Measurement Software KEYENCE VHX-A70D Console for the VHX-7000 Swiss power cable/adapter Original manuals Key features: 4K Ultra-HD imaging Seamless magnification from 20x to 6000x Fully motorized operation Multidirectional lighting Real-time 3D and roughness analysis Automated focusing and positioning User-friendly touch operation Ideal for industrial inspection, electronics, materials science, metallurgy, and R&D laboratories

Condition: used, Year of construction: 2022, Koh Young Machine AL-SL-00713 1. LZALPHA L-S-20-4W-L-6.5M  1  AL-SL-00713 Zenith Alpha HS L-Size Single Lane 4W/8M L→R 20um L (Lean) Platform Platform: L (Lean) Platform (standard version) Type: Zenith Alpha, L-Size Camera Resolution: 20 microns Ksdjx Tzhpjpfx Airedn Projection: 4-way grating projection Camera: 6.5 Megapixels Illumination: IR-RGB LED Operating System: Microsoft Windows 10 IOT Enterprise LTSC (Standard) Conveyor: Single lane Conveyor Type: Front fixed (Standard) Conveyor Belt Type: Timing belt - ESD (Standard) Conveyor PCB Transfer Height: 870–950 mm (Standard) Conveyor PCB Direction: L→R (Standard) Max. PCB Size: 490 × 510 mm (front fixed, Standard) Min. PCB Size: 50 × 50 mm PCB Thickness: 0.4–5 mm ESD: Standard + Extended Safety Option CE Declaration: English (Standard) Specification conforms to standard setup System Dimensions (W×D×H): 1000 × 1295 × 1627 mm HS Code: 9031.4990 Country of Origin: Republic of Korea 2. 803020-009105  1  to AL-SL-00713 AOI REVIEW STATION (REVIEW STATION SET, WINDOWS 10) Includes DELL XE3 PC with Windows 10, monitor, and keyboard HS Code: 8471.4900 Country of Origin: People's Republic of China 3. 101020-003007  1  to AL-SL-00713 UPS OPTION AOI_SPI (SMT750) APC – C-platform HS Code: 8504.4030 Country of Origin: Philippines

Condition: repair required (used), functionality: limited functionality, machine/vehicle number: 570115, Year of construction: 2013, operating hours: 928 h, total length: 1,400 mm, total height: 1,260 mm, total width: 1,100 mm, type of input current: AC, overall weight: 430 kg, input voltage: 230 V, For sale is a Stratasys Objet500 PolyJet 3D printer. The machine is explicitly offered as defective/in need of repair, as several print heads need to be replaced. The Stratasys Objet500 series is a professional industrial 3D printing system based on PolyJet technology. PolyJet works with liquid photopolymer, which is applied layer by layer via print heads and cured by UV light. The Objet500 models are designed for high-resolution prototypes, design models, functional prototypes, molds, fixtures, and components with fine surface quality. After repair, the machine is suitable for professional applications in the field of rapid prototyping, product development, model making, design, medical technology, engineering, and small-series production. Depending on the version of the Objet500 series, multi-material or digital material applications are also possible. Stratasys describes the Objet500-Connex family as a triple-jetting platform with multiple material/color or material combination options. Condition: Defective / in need of repair. Based on current knowledge, some print heads need to be replaced. Therefore, the machine is explicitly sold without any functional guarantee. Commissioning or repair should be carried out by qualified personnel or an authorized Stratasys service partner. On-site inspection is possible by arrangement. The machine may be of interest as a repair project, a source of spare parts, or for reconditioning by a specialist company. Technical data according to the manufacturer's specifications for the Objet500 series: Manufacturer: Stratasys Model: Objet500 / Objet500 Connex series Process: PolyJet 3D printing Build volume: approx. 490 × 390 × 200 mm Layer thickness: up to 16 micrometers Resolution: 600 dpi X-axis / 600 dpi Y-axis / 1600 dpi Z-axis Machine dimensions: approx. 1,400 × 1,260 × 1,100 mm Machine weight: approx. 430 kg Material cabinet: approx. 330 × 1,170 × 640 mm Weight of material cabinet: approx. 76 kg Power supply, depending on the version: 100–120 V or 220–240 V, 50/60 Hz, 1-phase Support material, depending on the system: SUP705 / SUP706B, depending on version and material approval The technical specifications refer to publicly available manufacturer/support data for the Stratasys Objet500 series. Stratasys specifies the build volume for the Objet500 Connex 1-2-3 as 490 × 390 × 200 mm; weight and system size are stated in data sheets as approx. 430 kg and 1,400 × 1,260 × 1,100 mm. Ksdey Uwlaopfx Airodn Note regarding the defect: The machine is not sold as operational. Known defect: print heads need to be replaced. Other defects cannot be ruled out. Therefore, the machine is explicitly sold as a defective used machine/repair device/source of spare parts. Terms of sale: Sale exclusively to commercial enterprises/businesses. The machine is sold as a used machine, as described or as inspected, excluding any liability for defects/warranty. No guarantee is provided. Errors and prior sale are subject to change. Inspection possible by arrangement. Sale takes place at the location.

Year of construction: 2019, condition: used, Used machine Year of manufacture: 2019 Kdedpfx Aijy Nugqsrjn - One print bed with a format of 2500 x 1300 mm or 2500 x 3100 mm (model 2531) - High speed: Prints up to 25 m²/h or up to eight sheets/h (color configuration 4C) in 2440 x 1220 mm format, and up to approx. 12.5 m²/h (color configuration 4C+W) with simultaneous white printing - New ink supply system: The 1-liter ink bottles can be easily replaced from the front — refilling is much faster! - Simple operation — no alignment issues: Equipped with alignment pins and a printed measuring scale for precise media positioning on the print table. The register pins secure the media against shifting. The measuring scale makes it easy to adjust layout and RIP data to the exact position. - Increased flexibility with direct print on thick media: Prints on boards up to 50 mm in thickness - Reduced banding thanks to Mimaki Advance Pass System - Special Mimaki circulation system prevents settling of white ink - Mimaki Clear Control (MCC): For glossy surfaces — to avoid dust adhesion and the formation of small air bubbles, MCC simultaneously reduces ink drying time and UV light exposure. This enables both glossy and stylish matte finishes. In addition, multiple layers of clear varnish can be applied for embossed, multidimensional effects. - Convenient ink options: - LH-100 rigid UV inks for all smooth surfaces with high scratch resistance, color brilliance, and solvent resistance - LUS-150 flexible UV inks for smooth and uneven surfaces, approximately 150% stretchability, making them suitable for a wide variety of substrates - White ink for image backing reduces light transmission - Two-layer printing with white on clear and colored substrates - Print finishing with gloss or matte varnish options - Environmentally conscious printing: No harmful emissions due to UV print technology. Lower power consumption and longer lifespan thanks to UV-LED lamps - RasterLink 6: - Powerful RIP supports outstanding color reproduction - Various print jobs can be easily nested - Simple and user-friendly interface - Intuitive icons help with quick orientation - Thematically related RIP settings are grouped in a single window and can be saved as favorites for repeated use - The print process is monitored directly in the main window - Software can be updated at any time via the internet, and profiles can be downloaded or updated. Printing method: Piezo inkjet Print heads: 2 heads in staggered arrangement Max. print format (W x L): 2500 × 1300 mm Max. media size (W x L): 2500 × 1300 mm Max. media thickness: 50 mm Max. media weight: 50 kg with even weight distribution Print resolutions: 300, 450, 600, 900, 1200 dpi Media hold-down: Vacuum Number of vacuum zones: 2 sections (on the X-axis) Accuracy (absolute): ± 0.3 mm or ± 0.3% of the specified distance (the larger value applies) Repeatability: ±0

Condition: used, functionality: fully functional, machine/vehicle number: Línea completa etiquetas, COMPLETE DIGITAL LABEL PRINTING AND FINISHING LINE The line includes: • Alca Mida 250 TRE Roll-to-roll finishing line for adhesive labels with die-cutting, cutting, rewinding, embossing, and UV varnishing. • BizPress 13R High-resolution LED toner CMYK digital label printer, ideal for short, medium, and variable data runs. • SMAG E-CUT S330 Professional finishing and converting system for labels with laminating, semi-rotary die-cutting, longitudinal cutting, and rewinding. • LabelCut R20s (ROTUTECH) Inspection, cutting, and finishing system for professional label production. Complete line ready for professional adhesive label production. Ideal for: Kedpfx Ajy Uddvsirjdn - label manufacturers - printing companies - industrial production - short and medium runs - variable data and personalization The machines are in very good working condition and can be seen in operation. Location: Spain For more information, videos, or additional photographs, please contact us.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation Kdedpfx Aoxgumceirjn – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: good (used), Year of construction: 2014, XEIKON 3050 including front end system Year of Manufacture: 2014 _____ Product Description:  Bar code modules  Xeikon PMS-Large  Rewinder XRN 500 single shaft, incl. Tension control  Maintained: Gold maintenance contract Kdsdpsv Iqimjfx Airen  Operating hours: very low estimated max. 300h  Condition: As good as new Machine Specifications and Equipment:  Print Process: Electrophotographic with LED array, dry toner, rotary printing with variable print length  Color Configuration: 5/0 simplex (CMYK and White)  Color Control: Integrated densitometer  Toner: Xeikon QA-I  Resolution: 1200 x 3600 dpi with 4-bit LED spot  Print Width: 508 mm (20.0 inches)  Print Length: Variable, 0-55 m (0-180 ft)  Substrate Feeding: Roll-fed; suitable for paper, paperboard, self-adhesive or pressure-sensitive labels (paper, PP, PET, vinyl, co-extruded film), transfer substrates  Substrate Width: 250-516 mm (9.8-20.3 inches)  Substrate Weight: 40 to 350 gsm (27 lb text to 122 lb cover)  Substrate Thickness: 40 to 550 μm (1.6 mil to 21.65 mil)  Web Alignment: Active, based on infrared and ultrasonic sensors  Print Speed: 9.6 m/min (31.5 ft/min) _____ Accessories Included:  Manuals  Keys  Etc. _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____

Condition: ready for operation (used), Manufacturer: Testo Model: 480 The Testo 480 features a built-in, high-precision differential pressure sensor, suitable for applications such as Pitot tube measurements, filter checks, and cleanroom monitoring. Its wide range of compatible probes allows measurement of the following parameters: Air velocity and air volume (e.g., for fume hood testing) Temperature Relative humidity Differential and absolute pressure CO₂ concentration Illuminance PMV/PPD (comfort index) Radiant heat Turbulence intensity WBGT index (heat stress) The instrument can be customized with various optional probes and accessories (e.g., a wireless printer for on-site reporting). Technical Specifications Temperature Measurement Pt100 Sensor Kdodpew Au Nxsfx Airon Measuring range: –100…+400 °C Resolution: 0.01 °C TC Type K (NiCr-Ni) Sensor Measuring range: –200…+1370 °C Accuracy: ±(0.3 °C + 0.1% of measured value) Resolution: 0.1 °C Relative Humidity (Capacitive Sensor) Measuring range: 0…100 %RH Resolution: 0.1 %RH Air Velocity – Vane Anemometer Ø 16 mm: 0.6…50 m/s | Resolution: 0.1 m/s Ø 100 mm: 0.1…15 m/s | Resolution: 0.01 m/s Air Velocity – Hot-wire Sensor Measuring range: 0…20 m/s Resolution: 0.01 m/s CO₂ Concentration (Ambient Air) Measuring range: 0…10,000 ppm Resolution: 1 ppm Comfort Level Measurement Measuring range: 0…5 m/s Resolution: 0.01 m/s Differential Pressure – Built-in Piezoresistive Sensor Measuring range: –100…+100 hPa Accuracy: 0…25 hPa: ±(0.3 Pa + 1% of measured value) 25.001…100 hPa: ±(0.1 hPa + 1.5% of measured value) Resolution: 0.001 hPa Illuminance Measuring range: 0…100,000 Lux Resolution: 1 Lux Absolute Pressure (Internal or External Probe) Measuring range: 700…1100 hPa Accuracy: ±3 hPa Resolution: 0.1 hPa General Technical Data Weight: 435 g Operating temperature: 0…+40 °C Storage temperature: –20…+60 °C Protection class: IP30 Connectable probes: 2 x TC Type K, 1 x differential pressure (internal), 3 x digital probes Compliance: Directive 2004/108/EC Battery life: approx. 17 hours (at 50% display brightness, without probes) Display: Color graphic display Power supply: Built-in rechargeable battery, mains charger for long-term measurements Data transfer: USB cable or SD card Memory capacity: 60,000,000 measured values

Condition: used, Year of construction: 2011, Web Width: 850 mm 1. Unwinding and Infeed System - Unwinder with constant web tension control - Web guiding and stabilization unit - Electronically controlled infeed system with precise tension regulation - Complete drive package for accurate web handling 2. Rewinding System - Single-shaft rewinder, max. roll diameter: 1000 mm - Constant tension control for stable winding 3. Surface Treatment & Web Cleaning - Corona treatment unit for surface energy optimization (pre-print) - ACE single-sided contact roller web cleaner for dust and particle removal 4. Printing Units Flexographic Printing Section - 8 flexo printing units with: - Central impression drum - Removable ink drawer (excl. anilox rollers) - Optional flexo features: - Explosion-proof configuration (per print station) - Drum cooling system - Lightweight anilox rollers: - 5 units (195–300 lpi) with gear - 5 units (>300 lpi) with gear - 24 print sleeves with cams - 2 additional ink drawers (tray + rubber roller) - 1 trolley for ink drawers (3 slots: 2 in use + 1 reserve) Special Flexo Units - 1 cold foil trolley - 1 movable cold foil unit (can be positioned at any print station, rail-free design) Rotogravure Printing Section - 1 rotogravure station for front- or reverse-side printing, includes: - Reversing bar for reverse-side printing - Designed for PETROCOLL cold-seal coating (2.8–3.2 g/m² at 180 m/min on paper) - Rotogravure trolley for mobile positioning - Extended hot air drying system: - “Super Hood” with 32 high-efficiency blowers - Methane gas burner for heating - Integrated cooling unit - Electrostatic assist for ink transfer - 3 rotogravure print sizes (16”–26”) - Solvent ink viscometer - Pump and ink supply tank 5. Drying and UV Curing - 8 UV curing units, 22 kW each (one per print station) - Integrated cooling for UV lamps - Drum cooling for heat-sensitive substrates 6. Die-Cutting and Finishing Units - Rotary die-cutter, working width up to 530 mm Kodjy Ey Niopfx Airodn - Base unit for die station - Trim removal system (up to 530 mm wide) - Matrix waste pressure system (limit: 530 mm) 7. Slitting Section - Shear (scissor) slitting system - 6 Helios box knives with self-sharpening counter blades 8. Electronic Control & Inspection - OMET electronic register control for 8-color operation - Includes “gate” function for accurate registration - Vision system for real-time print inspection - Motorized E+L Elscan camera for high-resolution web monitoring 9. Safety and Compliance - Complete CE-compliant safety guards and emergency stop systems - Designed for ergonomic operation and rapid job changeovers

Condition: new, Year of construction: 2026, functionality: fully functional, position of the milling head: mittig, spindle speed (max.): 60,000 rpm, total height: 1,550 mm, total length: 1,870 mm, total width: 1,040 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, overall weight: 560 kg, working range: 420 mm, warranty duration: 12 months, drive type: Linearmotor, Equipment: rotational speed infinitely variable, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 RD is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 RD depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany Kdjdpfxoxt Dk Re Airjn The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - profil frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 420 x 330mm - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - disc and sliding doors ESD conform Optionally a vacuum cleaner unit can be offered later.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Model: VR-5200 Type: Measuring Head Light Sources Observation light source: LED ring light (red, blue, green) Measurement light source: White LED Control Unit: VR-5000 Observation and Measurement Range Macro Mode Magnification (based on a 15-inch monitor) 12×: Horizontal 24.0 mm Vertical 18.0 mm Magnification (based on a 15-inch monitor) 25×: Horizontal 12.0 mm Vertical 9.0 mm Magnification (based on a 15-inch monitor) 38×: Horizontal 8.0 mm Vertical 6.0 mm Magnification (based on a 15-inch monitor) 50×: Horizontal 6.0 mm Vertical 4.5 mm Micro Mode Kedjyc Nmwjpfx Airodn Magnification (based on a 15-inch monitor) 40×: Horizontal 7.6 mm Vertical 5.7 mm Magnification (based on a 15-inch monitor) 80×: Horizontal 3.8 mm Vertical 2.9 mm Magnification (based on a 15-inch monitor) 120×: Horizontal 2.5 mm Vertical 1.9 mm Magnification (based on a 15-inch monitor) 160×: Horizontal 1.9 mm Vertical 1.4 mm Zoom: 1× to 4× Height Measurement Measurement resolution: 0.1 µm Height Measurement Range Without Z image composition Macro mode: 10 mm Micro mode: 1 mm With Z image composition Macro mode: 50 mm Micro mode: 30 mm Repeatability (σ) Without Z image composition: 0.4 µm With Z image composition: 1.0 µm Measurement Accuracy Without Z image composition: ±2.5 µm With Z image composition: ±4.0 µm Width Measurement Repeatability (σ) Macro mode: 1 µm Micro mode: 0.5 µm Measurement Accuracy Macro mode: ±5 µm Micro mode: ±2 µm Image Composition Fully automatic measurement (automatic XY control + automatic Z focus), automatic assignment, automatic area setup Measurable XY range: 206 × 104 mm Object Table XY travel: 184 × 88 mm (motorized) Z travel: 73 mm (motorized) Load capacity: 4.5 kg Working distance: 75 mm Image Sensor 4-megapixel CMOS, B/W Transmitter Lens Dual telecentric lens ×2 Receiver Lens Dual telecentric lens Data Processing Dedicated PC as per KEYENCE specifications (Operating system: Windows 11 Pro) Power Supply Voltage: 100 to 240 V AC, 50/60 Hz Power consumption: Max. 200 VA Environmental Resistance Operating temperature: 15 to 30°C Relative humidity: 20 to 80% RH (no condensation) Weight: Approx. 28 kg (net measuring unit weight approx. 11 kg)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, shaft length: 355 mm, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: water, laser wavelength: 355 nm, input frequency: 50 Hz, Equipment: cabin, UV Laser Engraving Machine with 20 Watt Laser Power - Laser source with 355nm wavelength / 20 watts - New machine, zero operating hours - incl. rotary axis - incl. Windows 64-bit PC system - incl. 22" monitor - fully installed and calibrated - Engraving software in German - 3D software (MM3D) - very user-friendly - plug and play operation - UV laser source with 20 watts for high-contrast, fast markings with extremely high resolution - engraves virtually all metals (stainless steel, brass, aluminum, etc.) - engraves virtually all plastics (including PVC, silicone, etc.) - engraves on real glass (including crystal glass) - can cut real glass - heavy-duty industrial quality - Complete system / ready for immediate operation - Working area approx. 500 x 600 x 600 mm (WxDxH) - Clamping surface with threaded holes in a 50 mm grid - LED workspace lighting - 50 mm pipe connection for fume extraction - Engraving area approx. 150x150 / 200x200 / 300x300 mm (selectable) - 3D scanner for marking surfaces of any shape - incl. foot switch to start the engraving process Sales exclusively to commercial customers. Delivery / consultation / sales only within Germany / Austria / Switzerland Please also consider our attractive leasing and hire-purchase offers. Machine dimensions approx.: Width: 800 mm Height: 1800 mm Depth: 1000 mm Kdsdpeflrnaefx Airon Weight: approx. 180 kg

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 4,000 rpm, travel distance X-axis: 48 mm, travel distance Z-axis: 236 mm, spindle motor power: 750 W, total height: 400 mm, overall weight: 85 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 810/840D Turn/Mill control, number of axes: 2, Horizontal turning machine manufactured in 2006. This EMCO Concept Turn 55 features a maximum turning diameter of 52 mm and a maximum part length of 215 mm. It includes a tool turret with 8 positions and a spindle speed range of 120–4000 rpm. If you are looking to get high-quality turning capabilities, consider the EMCO Concept Turn 55 machine we have for sale. Contact us for further details. • Working area • Swing over bed: 130 mm • Swing over cross slide: 60 mm • Maximum turning diameter: 52 mm • Maximum part length: 215 mm • Spindle/Workholding • Spindle connection: factory standard • Spindle bore: 16 mm • Chuck diameter: 74 mm • Through hole in chuck: 15 mm • Automatic chuck diameter: 76 mm • Mechanical speed steps: 2 • Maximum torque: 14 Nm • Tooling • Tool turret positions: 8 • Tool holders (internal/external): 4/4 • Tool shank size: 12 x 12 mm • Boring bar diameter: 10 mm • Feeds/Drives/Accuracy • Feed drives: 3-phase stepper motors; resolution 0.0005 mm • Rapid traverse X/Z: 2 m/min • Working feed X/Z: 0–2 m/min • Feed force X/Z: 1000 N • Position scatter X: 0.008 mm • Position scatter Z: 0.008 mm • Tailstock • Quill stroke: 35 mm • Quill diameter: 22 mm • Taper: MK1 • Automatic tailstock quill stroke: 15 mm • Lubrication • Guideways: oil • Other lubrication points: grease • Pneumatics • Supply pressure: 6 bar • Connection: 10 mm • Electrical • Power supply: 115/230 V • Voltage tolerance: +5/-10 % • Frequency: 50/60 Hz • Max fuse: 12 A • Dimensions/Weight/Noise • Axis height above floor: 320 mm • Footprint: 840 x 695 mm • Sound pressure level: 65 dB(A) • Slight corrosion on machine components (common for comparable machines) • 4+4 station tool turret Kdjdpfx Asy H Etcoirjn • Tailstock MK1 including quill and center point • 3-jaw chuck installed, no additional jaw sets included • Collets available, but no collet chuck • No drill chuck (MK1) and no drill bits included • Tools available as shown in images • 5.5 mm Allen key included • Siemens Sinumerik 810/840D Turn/Mill control (PC & CD) • License key included, likely transferable • Operating manual and machine documentation included • Data carriers included Technical Specification Driven Tools No Counter Spindle No

Condition: good (used), Year of construction: 2010, Technical Specifications Manufacturer: Werth Messtechnik GmbH Model: Video-Check 800x400x200 3D Year of manufacture: 2010 Measuring range: 800x400x200 mm Control system: Operator console with joystick and function buttons Voltage: 230 V AC Frequency: 50 Hz Current consumption: max. 10 A Camera: High-resolution video technology Probes: Renishaw measuring probe Multi-sensor technology: Combined optical and tactile measurement Construction: Solid granite base SCOPE OF DELIVERY Includes, among others (list not exhaustive): • 3D measuring machine Werth Video-Check 800x400x200 • Operator console with joystick and function buttons • Probes Exact scope of delivery as per photo documentation The Werth Video-Check 800x400x200 is a high-precision 3D measuring machine for versatile applications in quality assurance. With its large measuring range of 800x400x200 mm, it is suitable for small to medium-sized components. The machine features multi-sensor technology that allows both optical and tactile measurements, offering maximum flexibility. The robust granite construction ensures the highest measurement accuracy and long-term stability. Thanks to the Renishaw probe, video camera, and convenient control via operator console, complex measuring tasks can be performed efficiently and reliably. Ksdpfxoxfly De Airsdn No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Condition: excellent (used), Year of construction: 2011, TECHNICAL DATA Linear Axes (Slides X, Y, Z) Travel distances: Axis X: 250 mm Axis Y: 200 mm Axis Z: 300 mm Rapid traverse (X, Y, Z): 30 m/min Feed force (X, Y, Z): 3700 N Resolution (X, Y, Z): 0.0001 mm Rotary Motion of Motor Spindle – Axis B Rotary travel range: -15° to +100° Rotary travel range (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Maximum speed: 20 rpm Drive torque: 750 Nm Hydraulic clamping: 50 bar Holding torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Power at 100% duty cycle: 10 kW Power at 25% duty cycle: 15 kW Nominal torque (100%): 8 Nm Nominal torque (25%): 12 Nm Speed range: 50 – 30,000 rpm Axis A (Bar capacity Ø 40 mm) Spindle type: A4 Max. bar diameter: 40 mm Max. speed: 35 rpm Drive torque (nominal): 112 Nm Drive torque (max.): 238 Nm Resolution: 0.0001° Axis clamping (Axis A): Pressure: 70 bar Holding torque: 130 Nm Tool Changer Number of tool discs: 2 Positions per disc: 24 Max. tool weight: 1 kg Rotational speed: 60 rpm Max. tool diameter (adjacent positions occupied): 50 mm Max. tool diameter (adjacent positions free): 63 mm Max. tool length (from spindle nose): 95 mm Coulisse de Reprise Travel distance: 80 mm Feed force: 1700 N Tilting moment: 90 Nm Resolution: 0.0001° Hydraulic pressure for tilting motion: 100 bar Workpiece Manipulator Pneumatic vertical slide gate: Ø 25 mm Stroke: 710 mm Linear travel per motor revolution: 70.4 mm/rev Max. transfer speed: 60 m/min Max. workpiece weight: 5 kg Max. manipulator stroke: 1120 mm (2×560 mm) Max. vertical travel: 150 mm Part pick-up Ø/length: Ø 32 mm / 100 mm Part ejection Ø/length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip force: 45 N (at 6 bar) Max. gripper opening: 14 mm (2×7 mm) Pneumatic Equipment Operating pressure: 6 bar Hydraulic System Operating pressure: 95 – 105 bar Coolant System Coolant tank volume: 80 liters Chip pan volume: 30 liters Kinematic viscosity in operation: 10 – 15 cSt SCOPE OF DELIVERY Includes (not limited to): Willemin Macodel W 408 B machining center Extraction unit Fire suppression system Kodpfswv Hnmsx Airjdn Probe Coolant system Oil chiller Data backup Complete operator documentation Exact scope of delivery as per photo gallery No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: like new (used), Like new. Compatible with Polyworks software. A very beautiful and elegant 3D CNC measuring machine, the Renishaw Equator 300, offered at an attractive price. Three-dimensional comparison with an accuracy of two micrometers! Measuring volume: X and Y axis ø 300 mm – Z axis 150 mm. Resolution: 0.0002 mm. Scanning rate (SP25): 1000 points per second. Scanning speed: 200 mm per second. Maximum traverse speed: 500 mm per second. Operating temperature: +5 to +50 °C. Maximum power consumption: 190 watts. Maximum workpiece weight: 25 kg. Machine weight: 25 kg. Height: 700 cm. Width: 570 cm. Length: 500 cm. No compressed air required. SP25 SM25-1. 6 x SH25 probe heads Wecksler for 6 probes. MODUS™ IM DMIS software & license key. Renishaw control PC, monitor, mouse & keyboard. (Also controllable with Polyworks). The starting bid for the offered configuration is €5,000. Kjdpfx Aisy S Dbcersdn