Used Optimum S 181 for sale (107)

Condition: as good as new (ex-display), Year of construction: 2026, Optiturn L28 HS CNC lathe directly from the manufacturer. L28 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop impact switch - Central lubrication - Reference switch - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download free of charge - Two-year SIEMENS warranty included Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 3.75 kVA Spindle Drive motor S1 operation 2.2 kW Torque drive motor S1 operation 14 Nm Torque at the spindle 28 Nm Spindle holder DIN 6350 A2-3 Spindle cone 5C Spindle bore Ø 30 mm Cooling lubricant system Coolant pump output 95 W Tank capacity 25 liters Machine data Center height 169 mm Center width 430 mm Rotation Ø over cross slide Ø 200 mm Rotation Ø over machine bed Ø 300 mm Speed range Spindle speeds* 40 - 4,000 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Bhajn7pvcu Travel distance X-axis 145 mm Dcedpfx Aszi Er Iecpen Z-axis 465 mm Feed speed X-axis 10,000 mm/min. Z-axis 12,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: as good as new (ex-display), Year of construction: 2026, Optiturn L34 HS CNC lathe directly from the manufacturer. L34 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop switch - Central lubrication - Spindle and feed motors from Siemens - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 6.5 kVA Spindle Drive motor S1 operation 3.7 kW Torque drive motor S1 operation 23.6 Nm Torque at the spindle 40 Nm Spindle holder DIN 6350 A2-3 Spindle bore Ø 46 mm Coolant system Coolant pump output 95 W Dcodpfxozi Evgs Acpon Tank capacity 75 liters Machine data Center height 165 mm Center width 600 mm Rotation Ø over cross slide Ø 146 mm Rotation Ø over machine bed Ø 350 mm Speed range Yvwdh0 Spindle speeds* 30 - 3500 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 6,000 mm/min. Z-axis 8,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: new, Year of construction: 2026, Optimum Geared Metal Band Saw OPTIsaw SD 200V For demanding sawing work Item number: 3300205 DESCRIPTION Quiet operation Sturdy cast iron construction Saw frame lowering continuously adjustable via hydraulic cylinder with throttle valve Microswitch for automatic limit stop Clearly legible scale for angle adjustment Standard with high-quality bi-metal saw blade Saw blade tension adjustable from the front via handwheel Ball-bearing saw blade guide Robust machine base with large wheels and handy transport handle for easy relocation of the machine Adjustable material stop for series work Safety switch for the saw blade cover Fully equipped, allowing the user to work productively immediately after commissioning TECHNICAL DATA Dimensions and Weights Length (product) approx. 1382 mm Width without material stop approx. 434 mm Width/Depth (product) approx. 533 mm Width with Material stop approx. 533 mm Height (product) approx. 1200 mm Height of lower end position approx. 790 mm Height of upper end position approx. 1200 mm Weight (net) approx. 130 kg Work table height 530 mm Electrical data Drive motor power 0.75 kW Connection voltage 230 V Mains frequency 50 Hz Coolant pump motor power 100 W Machine data Saw blade speed(s) 26 – 80 m/min Saw blade length 2360 mm Saw blade width 19 mm Saw blade thickness 0.9 mm Cutting angle 0 – 45° Feed continuously adjustable Saw frame lift manually Cutting ranges Cutting range 0° round (solid material) 180 mm Cutting range 0° square (solid material) 180mm Cutting range 0° rectangular vertical (solid material) 180 x 240 / 50 x 300mm Cutting range +45° round (solid material) 110mm Dedpfov Sg T Njx Acpocn Cutting range +45° square (solid material) 150mm Cutting range +45° rectangular vertical (solid material) 110 x 170mm SCOPE OF DELIVERY Material stop Bi-metal saw blade Machine base

Condition: as good as new (ex-display), Year of construction: 2025, Machine currently on display. Optimill F 300 HSC Premium CNC milling machine, direct from the manufacturer. F 300 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control features outstanding performance, speed, precision, and long service life. • Heavy-duty construction • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Linear guideways with roller recirculation on all axes for high load capacity • High-torque servo drives directly coupled to the ball screws in all three axes • Precision-ground, preloaded high-performance ball screws for rapid traverse speeds on all axes • Telescopic guideway covers on all three axes • Main spindle SK40 with spindle speed up to 15,000 rpm, inline spindle • Solid, precision-ground milling table with five T-slots, generously dimensioned • Portable electronic handwheel with enabling switch and emergency stop impact switch significantly simplifies program setup • Automatic tool changer with double-arm gripper, 30 tool stations • Coolant unit with chip flushing system and cleaning gun • Through-spindle coolant 20 bar • Belt-type chip conveyor ensures efficient chip removal • Chip cart • Oil separator • Machine light in working area • Additional SIEMENS warranty package and free online/on-site service (OSS Plus) • 1 year basic maintenance contract included for Germany, Austria, Switzerland • Control unit • 15.6" color display • 16:9 format • Complete package • Safety Integrated • Remainder material detection and processing • ShopMill operation step programming • Network drive management • 3-D simulation Dsdpfjymd Epsx Acpocn • Program tracing • Additional Siemens OSS PLUS package • 12 months; Item No. 3589020 • 24 months; Item No. 3589021 • 36 months; Item No. 3589022 Equipment details • Inline spindle • SK 40 / DIN 69871 spindle taper • Spindle speed 15,000 rpm Dimensions and weight • Length approx. 2856 mm • Width/depth approx. 2300 mm • Height approx. 2850 mm • Weight approx. 6500 kg Rapid traverse speed • X-axis 36 m/min • Y-axis 36 m/min • Z-axis 32 m/min Electrical data • Supply voltage 400 V • Mains frequency 50 Hz • Electrical connection • Total connected load 30 kVA Milling table (horizontal) • Length 1200 mm • Width 600 mm • T-slot size 18 mm • Number of T-slots 5 • T-slot spacing 100 mm • Maximum load capacity 800 kg Accuracy • Repeatability ± 0.005 mm • Positioning accuracy ± 0.005 mm Travel • X-axis (automatic) 1000 mm • Y-axis (automatic) 620 mm • Z-axis (automatic) 630 mm Vertical spindle • Spindle taper SK 40 DIN 69871 • Speed range 15,000 rpm • Continuous operation motor power (S1) 20 kW • Motor power (S6-30% duty cycle): 52.4 kW • Continuous torque (S1): 96 Nm • Torque at 30% duty cycle (S6): 250 Nm Feed force • X-axis feed force: 6.68 kN • Y-axis feed force: 6.68 kN • Z-axis feed force: 12.01 kN Feed drive torque • X-axis continuous operation (S1): 20 Nm • Y-axis continuous operation (S1): 20 Nm • Z-axis continuous operation (S1): 36 Nm Tool changer • Double-arm gripper • Number of tool stations: 30 • Max. tool length: 300 mm • Max. tool weight: 8 kg • Tool-to-tool change time: 2.5 seconds

Condition: as good as new (ex-display), Year of construction: 2024, High-quality spindle with precision tapered roller bearings Dcjdpfew Eay Isx Acpsn Hardened and ground table guideways Turcite-B coated counter guides for high wear resistance and low friction Integrated grinding wheel removal device Machine base made of sturdy, torsion-resistant cast iron for maximum rigidity and stability Backlash-free V-flat guide in the Z-axis and flat guides in the X- and Y-axis Trapezoidal threaded spindle in the Y-axis Manual central lubrication All flat guides are finely scraped, guaranteeing high precision of all manual movements LED lamp Safety electrics with 24 V DC voltage Sanding accuracy: 0.005 mm Grit 46 corundum grinding wheel for all common steels included as standard Two-channel safety electrics EMC filter class Significant energy savings thanks to IE3 motor Coolant system with external coolant tank Dimensions and weights Length approx. 1970 mm Width/depth approx. 1300 mm Height approx. 1700 mm Weight approx. 850 kg Electrical data Power drive motor 1.5 kW Supply voltage 400 V Mains frequency 50 Hz Surface grinding table Clamping surface length 200 mm Clamping surface width 500 mm Grinding wheel(s) Outer diameter 200 mm Width 20 mm Bore 31.75 mm Peripheral speed 33 m/s Spindle Speed 2850 min¯¹ Concentricity 0.005 mm X-axis Feed speed Manual

Condition: used, Technical details: cutting diameter: 260 mm saw band length: 2925 mm saw band width: 0,9 mm cutting range 90 degrees: round: 270 mm cutting range 90 degrees: flat: 350x240 mm cutting speed: 35/72 m/min height over floor: 1,050 mm total power requirement: 1,9 kW machine weight approx.: 660 kg dimension machine xH: 1,2 x 0,75 x 1,05 m Bandsäge - Halbautomat schwere Industriebandsäge mit Rollenbahn Gehrungsschnitt möglich hydr. Werkstückklemmung i.D. * Dcjdpfev T Tcmex Acpen

Condition: used, Technical details: x-travel: 200 mm y-travel: 450 mm z-travel: 460 mm control: Siemens 802S base line spindle taper ISO: ER 32 spindle head swivable left - right: nein ° turning speed range: 150 - 8600 U/min feed:: X/Y/Z: 2000 - stufenlos mm/min table surface area: 750 x 210 mm interface: 232 total power requirement: 3 kVA Dcodpsu Ndcaefx Acpen weight approx.: 760 kg dimension machine xH: 1,9 x 1,2 x 2,1 m Table movement: X-axis: 200mm and Y-axis: 450mm spindle vertical Z-axis: 460mm max. tool holder milling cutter: Ø 20mm drilling capacity ST: Ø 13mm max. distance spindle-table: 470mm Equipment: Manual control unit cooling system central lubrication machine interior lighting Machine feet *

Year of construction: 2022, condition: new, Motor power: 1.1 kW / 230 V Dodpjgulr Ajfx Acpscn Cutting area: 100 mm x 145 mm Feed: continuously adjustable Saw blade speed: 22 / 31 / 55 m/min Saw blade dimensions: 1638 x 13 x 0.65 mm Cutting angle: -45° to 60° Dimensions: 1085 mm x 498 mm x 978 mm Weight: 78 kg

Condition: good (used), Year of construction: 2018, travel distance X-axis: 800 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 406 mm, spindle speed (max.): 5,100 rpm, spindle speed (min.): 10 rpm, table width: 230 mm, table length: 1,245 mm, type of input current: three-phase, overall weight: 950 kg, input voltage: 380 V, Used turret milling machine Brand: Optimum Model: OPTIMILL MF 2V Year: 2018 Weight: 950 kg Swiveling head with Siemens variable speed drive. 3-axis dimension display. Type: Turret milling machine with swiveling head ±90° (left/right) and tilting ±45°. Spindle taper: ISO 40 (DIN 2080 / DIN 69871) Dedpfx Acoz Ducvopocn Speeds: Continuous electronic variable speed drive (typically 10 to 5,100 RPM). Table surface: 1,245 x 230 mm Travel (X / Y / Z): 800 mm / 305 mm / 406 mm Motor power: 3.7 kW (Three-phase 380V) Automatic quill feeds: 3 Automatic motorization in X and Y axes with variable speed control and rapid traverse mode. Machine complies with CE regulations.

Condition: new, Year of construction: 2025, New machine. Please ask for current price and delivery time. Dimensions and weights: Length (product): approx.2129mm Width/depth (product): approx.1046mm Height (product): approx.1687mm Weight (net): approx.645kg Electrical data: Power drive motor: 3kW Supply voltage: 400V Mains frequency: 50Hz Hydraulic pump motor power: 1.4kW Motor power coolant pump: 100W Total connected load: 3.8kW Machine data: Saw blade speed(s): 20 - 80m/min Saw blade length: 3770mm Saw blade width: 34mm Saw blade thickness: 1.1mm Cutting angle: -45 - 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Cutting ranges: Cutting range 0° round (solid material): 355mm Cutting range 0° square (solid material): 300mm Dcedperah S Hsfx Acpsn Cutting range 0° rectangular upright (solid material): 300 x 490mm Cutting range -45° round (solid material): 290mm Cutting range -45° square (solid material): 250mm Cutting range -45° rectangular upright (solid material): 250 x 250mm Cutting range +45° round (solid material): 350mm Cutting range +45° square (solid material): 290mm Cutting range +45° rectangular upright (solid material): 290 x 340mm Cutting range +60° round (solid material): 230mm Cutting range +60° square (solid material): 180mm Cutting range +60° rectangular upright (solid material): 180 x 220mm

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F50 E CNC milling machine, direct from the manufacturer. F50 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control stands out with its power, speed, precision, and long service life. • Machine in rigid cast frame design for high stiffness • Carousel tool changer with eight tool stations • All linear guides equipped with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive on all axes (closed loop) • Maximum spindle speed of 10,000 rpm • The portable electronic handwheel with enabling button and emergency stop facilitates program setup significantly • Coolant system with 70-liter coolant tank • Tool change is automatic or by button press (electropneumatic tool clamping system) • Massive, precision-milled work table – large and precisely ground surface • Large access doors designed to minimize cleaning and maintenance time • LED machine light for complete workspace illumination • SIEMENS options package with material defect liability and free on-site OSS service SINUMERIK 808D • Control-identical software package for process reliability • LED tool number display • MCP with rotary switch for feed and spindle override • Absolute encoders – no homing run required • Higher accuracy Control system • 8.4” LCD color display with 800 x 600 resolution SIEMENS OSS options package • 12 months; Item No. 3589010 • 36 months; Item No. 3589012 Dimensions and weights Length approx. 2030 mm Width/depth approx. 1600 mm Height approx. 1980 mm Weight approx. 1900 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 10 kVA Work table horizontal Length 690 mm Width 225 mm Vertical spindle-table distance min. 90 mm Vertical spindle-table distance max. 410 mm T-slot size 14 mm Number of T-slots 3 T-slot spacing 63 mm Max. load capacity 150 kg Accuracy Repeat accuracy ± 0.015 mm Positioning accuracy ± 0.015 mm Pneumatic connection Operating pressure 6 bar Travel X-axis automatic 330 mm Y-axis automatic 220 mm Z-axis automatic 320 mm Spindle-column distance min. 280 mm Spindle-column distance max. 280 mm Vertical spindle Spindle taper BT 30 Speed range 10,000 rpm Drive motor power continuous operation S1 3.7 kW Drive motor power S6-30% duty 5.5 kW Dcodpfx Aceymkdxspsn Drive motor torque continuous operation S1 24 Nm Drive motor torque 30% duty S6 36 Nm Feed rates X-axis 15,000 mm/min Y-axis 15,000 mm/min Z-axis 15,000 mm/min Feed motor torque X-axis continuous operation S1 3.5 Nm Y-axis continuous operation S1 6 Nm Z-axis continuous operation S1 6 Nm Tool changer Type: carousel Number of tool stations: 8 Maximum tool diameter: 100 mm Maximum tool length: 200 mm Maximum tool weight: 6 kg Tool-to-tool change time: 7 s

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 3 Pro CNC milling machine (training machine) directly from the manufacturer. F 3 PRO - The OPTIMUM CNC milling machine with Siemens control SINUMERIK 808D Advanced is characterized by performance, speed, precision and long service life. All linear guides with stainless steel covers Automatic central lubrication Servo drive from SIEMENS in all axes (open control loop) Max. Spindle speed 4000 min-1 Machine light in the work area Portable, electronic handwheel with enabling switch and emergency stop switch. Makes running in programs considerably easier Tools can be changed at the touch of a button Access doors very generously designed to reduce cleaning and maintenance time to a minimum Software package "SINUMERIK 808D on PC" included. (Practical training software so that workpieces can be programmed and simulated offline on the PC. Software can be downloaded free of charge at). SINUMERIK 808 ADVANCED - CNC technology from the technology leader, paired with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC control. The compact and user-friendly entry-level solution is used for simple milling applications. Features such as simple operation, commissioning and maintenance are the perfect basis for equipping CNC machines. Compact and robust Thanks to a panel-based CNC design with few interfaces and a control panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments. The small dimensions allow it to be used in compact machines INCLUDED RJ45 Ethernet port 8.4" LCD color display with 800 x 600 resolution Prepared for remote maintenance Dimensions and weights Length approx. 1410 mm Width/depth approx. 1372 mm Height approx. 2007 mm Weight approx. 1000 kg Drilling/milling capacity Cutter head size max. 50 mm End mill size max. 25 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 5 kVA Horizontal milling table Length 620 mm Width 180 mm Distance vertical spindle - milling table min. 50 mm Distance vertical spindle - milling table max. 295 mm T-slots size 12 mm Number of T-slots 3 T-slot spacing 50 mm Load max. 30 kg Accuracy Repeat accuracy ± 0.02 mm Positioning accuracy ± 0.01 mm Coolant system Coolant pump(s) Drive power 95 W Tank capacity 30 l Travel distance X-axis automatic 355 mm Y-axis automatic 190 mm Z-axis automatic 245 mm Vertical spindle Spindle holder BT 30 Speed range 4000 min¯¹ Explanation Speed range Please note that the maximum spindle speed must be reduced by approx. 20 % in continuous operation Power drive motor continuous operation S1 1.5 kW Power drive motor S6-30 % operation 2.2 kW Torque drive motor continuous operation S1 9.5 Nm Torque drive motor 30% operation S6 14 Nm Feed rate Speed X-axis 10000 mm/min Y-axis 10000 mm/min Z-axis 10000 mm/min Feed motor torque X-axis continuous operation S1 1.9 Nm Dcedpfeymkkfox Acpen Y-axis continuous operation S1 3.5 Nm Z-axis continuous operation S1 3.5 Nm

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display. Optimill F 80 CNC milling machine, direct from the manufacturer. F 80 CNC – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D control is distinguished by performance, speed, precision, and long service life. • Machine base constructed from cast iron for high rigidity • Carousel-type tool changer with 12 tool stations • All linear guides equipped with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive in all axes (closed loop) • Maximum spindle speed of 10,000 rpm • The portable electronic handwheel featuring an enabling switch and emergency stop button makes program setup significantly easier • Coolant system with 70-liter coolant tank • Tool change performed automatically or at the push of a button (electropneumatic tool clamping system) • Heavy-duty, high-precision milling table – large dimensions and precision ground finish • Generously dimensioned access doors minimize cleaning and maintenance time • LED machine light for complete illumination of the working area SINUMERIK 808 ADVANCED Compact and robust Communication features: • Front USB port (IP65) • Serial RS232C interface • RJ45 Ethernet on rear panel User-friendly: • Technology-specific keyboard layout • Hard keys with protective membrane Process reliability: • LED tool number display • MCP with rotary switch for feed and spindle override Complete package: • RJ45 Ethernet port • Prepared for remote maintenance • AST function; allows simple optimization for enhanced dynamic and accuracy requirements • Absolute encoder / no reference run necessary • Higher precision Dimensions and Weight Length: approx. 1995 mm Width/Depth: approx. 1930 mm Height: approx. 1640 mm Weight: approx. 2300 kg Rapid traverse speed X axis: 20 m/min Y axis: 20 m/min Z axis: 20 m/min Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Electrical Connection Total connected load: 12 kVA Horizontal Milling Table Length: 800 mm Width: 260 mm Distance vertical spindle – table, min.: 100 mm Distance vertical spindle – table, max.: 550 mm T-slot size: 16 mm Number of T-slots: 5 T-slot spacing: 50 mm Maximum load capacity: 200 kg Accuracy Repeatability: ± 0.01 mm Positioning accuracy: ± 0.01 mm Coolant/Lubricant System Coolant pump drive power: 450 W Tank capacity: 80 l Pneumatic Connection Operating pressure: 7 bar Travel X axis (automatic): 450 mm Y axis (automatic): 260 mm Z axis (automatic): 450 mm Max. spindle–column distance: 370 mm Vertical Spindle Spindle taper: BT 40 Speed range: 50 – 10,000 rpm Note: Maximum spindle speed must be reduced by approx. 20% during continuous operation Drive motor power S1 (continuous duty): 3.7 kW Drive motor power S6-30% duty cycle: 5.5 kW Drive motor torque S1: 24 Nm Drive motor torque S6-30%: 36 Nm Feed Motor Torque X axis S1: 6 Nm Y axis S1: 6 Nm Dcsdpfx Acsymkcujpon Z axis S1: 11 Nm Tool Changer Design: Carousel Number of tool stations: 12 tools Max. tool diameter: 95 mm Max. tool length: 300 mm Max. tool weight: 8 kg Chip-to-chip tool change time: 7 s

Condition: as good as new (ex-display), Year of construction: 2025, GT 40 – The OPTIMUM Premium NC Grinding Machine with Siemens Touch Screen. • Electromagnetic clamping plate for securing the workpiece, featuring automatic demagnetization function • High-quality spindle with precision tapered roller bearings • Hardened and ground table guideways • Turcite-B coated counter-guides for high wear resistance and low friction • Grinding spindle equipped with premium precision bearings • The grinding wheel can be dressed directly on the machine using the dressing device • Digital position display • Machine base made from stable, torsion-resistant cast iron for maximum rigidity and stability • Guideways for longitudinal, cross, and vertical movements are backlash-free and self-centering, designed as V and flat ways • Precision ball screw drives • Guideways and feed screws with centralized lubrication • All flat guides are hand-scraped, guaranteeing the highest precision for all manual movements • Safety electronics with 24 V DC voltage • Large, decoupled handwheels on all three axes • Hydraulic lines compliant with DIN EN 853 • Grinding accuracy: 0.005 mm • Corundum grinding wheel, grit 46, suitable for all common steels • Swiveling control panel for greatly simplified operation • Separate hydraulic unit with heat exchanger to prevent vibrations and thermal stress • Dual-channel safety electronics • Grinding table splash guard • EMC filter class • Equipped with IE3 motor – significantly reduces energy consumption and provides substantial cost savings Dimensions and Weights Length approx. 3600 mm Width/Depth approx. 2400 mm Height approx. 1900 mm Weight approx. 3600 kg Electrical Data Total connected load: 7.5 kW Supply voltage: 400 V Mains frequency: 50 Hz Surface Grinding Table Clamping area length: 400 mm Clamping area width: 800 mm Grinding Wheel(s) Outer diameter: 350 mm Width: 40 mm Bore: 127 mm Peripheral speed: 27 m/s Dedpfx Acsymduqepecn Spindle Speed: 1450 rpm Run-out accuracy: 0.005 mm X-Axis Feed rate: 5 – 25 m/min Standard Features • Digital position display • Coolant system • Balancing arbor • Grinding wheel, grit 46 • Diamond dresser • Operating tools • Manual oil pump • LED lamp • Electromagnetic clamping plate • Demagnetization function Equipment • Electromagnetic clamping plate • Table enclosure with splash guard • Demagnetization device • Parallel dressing device ✔ • Coolant system 125 W • Working light: LED lamp • Leveling feet ✔

Condition: like new (used), Year of construction: 2018, functionality: fully functional, operating hours: 100 h, OPTIMUM OPTIdrill DH 40 GP geared drill press – in top condition – used sparingly For sale is a high-quality OPTIMUM OPTIdrill DH 40 GP geared drill press in very well-maintained condition. Dsdpfxsztl Tme Acpecn The machine comes from a private workshop and has only been used occasionally; it is not a production machine intended for continuous use. It functions perfectly and can, of course, be inspected and tested on site. Technical data: - Manufacturer: OPTIMUM - Model: OPTIdrill DH 40 GP - Drilling capacity in steel: 40 mm - Geared drill press with mechanical speed change - Automatic quill feed - Right/left rotation - Precise column and solid worktable - MK4 spindle mount - Coolant system (if available) - Operates on 400 volt three-phase power Condition: - Technically perfect - Very well-maintained - Low operating hours - No backlog of repairs - Ready for immediate use The quality of OPTIMUM is well-known in the professional sector. The DH 40 GP is a stable, durable machine with high precision. New price: 3,804 Inspection: The machine can be inspected and tested under power by appointment. Loading can be assisted upon agreement. Private sale, no warranty or returns.

Condition: as good as new (ex-display), Year of construction: 2025, GT 30 - The OPTIMUM premium NC sanding machine with Siemens touch screen. - Electromagnetic clamping plate for fixing the workpiece with automatic demagnetization function - High-quality spindle with precision tapered roller bearings - Hardened and ground table guideways - Turcite-B coated counter guides for high wear resistance and low friction - Grinding spindle with high-quality precision bearings - Grinding wheel can be resharpened directly on the machine using a sharpening device - Digital position indicator - Machine base made of sturdy torsion-resistant cast iron for maximum rigidity and stability - Guideways for longitudinal, transverse and vertical movements are backlash-free and self-centring as V and flat tracks - Precision recirculating ball screws - Guideways and transport spindle with central lubrication - All flat guides are finely scraped and thus guarantee maximum precision of all manual movements - Safety electrics with 24 V DC voltage - Large decoupled handwheels in all three axes - Hydraulic lines according to DIN EN 853 - Sanding accuracy: 0.005 mm - Grain 46 corundum grinding wheel for all common steels - Swivel-mounted control panel makes work considerably easier Dcjdoymdtyjpfx Acpsn - Separate hydraulic unit with heat exchanger, avoids vibrations and thermal stress - Two-channel safety electronics - Grinding table splash guard - EMC filter class - With IE3 motor - consumes considerably less energy, resulting in significant cost savings Dimensions and weights Length approx. 3200 mm Width/depth approx. 2200 mm Height approx. 2100 mm Weight approx. 3000 kg Electrical data Total connected load 6.5 kW Supply voltage 400 V Mains frequency 50 Hz Surface grinding table Clamping surface length 300 mm Clamping surface width 600 mm Grinding wheel(s) Outer diameter 350 mm Width 40 mm Bore 127 mm Peripheral speed 27 m/s Spindle Speed 1450 min¯¹ Concentricity 0.005 mm X-axis Feed speed 5 - 25 m/min Scope of delivery Unit of measure: piece Packaging unit: 1 Digital position indicator Coolant device Balancing mandrel Grinding wheel grit 46 Diamond pin Operating tool Manual oil pump LED lamp Electromagnetic clamping plate Demagnetizing function Equipment Electromagnet clamping plate Splash guard table enclosure Automatic demagnetizing device Parallel dressing device ✔ Coolant device 125 W Work light LED lamp Alignment feet ✔

Year of construction: 2022, condition: ready for operation (used), A universal precision drilling and milling machine by Optimum is available. Speed: 1750rpm, spindle sleeve travel: 120mm, milling head swivel: +/-45°, vertical reach range: 24mm-650mm, horizontal reach range: 0mm-185mm, spindle-to-cross table distance: 60mm-390mm, drilling capacity in steel: 30mm, max. face mill diameter: 100mm, max. end mill diameter: 25mm, cross table dimensions X/Y: 1000mm/240mm, max. table load: 160kg, travel X/Y/Z: 580mm/200mm/340mm, X-axis feed: 720mm/min, machine dimensions X/Y/Z: approx. 1300mm/1100mm/2200mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible. Dsdpfxozq Ecvo Acpscn

Condition: used, Year of construction: 2017, bore capacity in steel (diameter) 40 mm throat 285 mm bore stroke 160 mm Spindle Speed 150-2.000 U/min. spindle taper MK4 column diameter 115 mm Dedozpzdaepfx Acpocn total power requirement 1,5/2,2 kW weight of the machine ca. 275 kg dimensions of the machine ca. 1000x700x1900 mm

Condition: as good as new (ex-display), Year of construction: 2026, OPTIdrill D 26PRO - Pillar drilling machine Dcedpjdqzbnefx Acpjn Bench and pillar drilling machine with V-belt drive User-friendly safety switch according to IP 54 with undervoltage release and separate emergency stop button 400-volt models with right/left rotation Drilling depth stop Precisely manufactured drilling table with diagonally running T-slots Height adjustment of the drilling table via rack and pinion Drilling table can be tilted ± 45° and rotated 360° V-belt cover with safety switch Aluminum die-cast quill lever in one piece with soft-grip handles Industrial motor Precision spindle bore Machine operation including safety electricals in 24 V DC Guaranteed run-out accuracy

Condition: as good as new (ex-display), Year of construction: 2025, GT 25 – The OPTIMUM Premium NC Grinding Machine with Siemens Touchscreen. • Electromagnetic chuck for securing the workpiece, with automatic demagnetization function • High-quality spindle with precision tapered roller bearings • Hardened and ground table guideways • Turcite-B coated counter-guides for high wear resistance and low friction • Grinding spindle with premium precision bearings • Grinding wheel can be dressed directly on the machine with an integrated dressing device • Digital position display • Machine base made of stable, torsion-resistant cast iron for maximum rigidity and stability • Longitudinal, cross, and vertical axis guideways are backlash-free and self-centering, designed as V and flat guideways • Precision ball screws • Central lubrication for guideways and feed screws • All flat guides are finely scraped, guaranteeing maximum precision in all manual movements • Safety electronics with 24 V DC • Large, decoupled handwheels on all three axes • Hydraulic lines according to DIN EN 853 • Grinding accuracy: 0.005 mm • Corundum grinding wheel, grit 46, suitable for all standard steels • Swivel control panel makes operation significantly easier • Separate hydraulic unit with heat exchanger prevents vibrations and thermal loading • Dual-channel safety electronics • Grinding table splash guard • EMC filter class • Equipped with IE3 motor – significantly reduces energy consumption, providing substantial cost savings Technical Data: Dimensions and Weights Length approx. 2300 mm Width/Depth approx. 1600 mm Height approx. 1675 mm Weight approx. 1700 kg Electrical Data Total connected load: 3 kW Supply voltage: 400 V Phases: 3 Ph Current type: AC Mains frequency: 50 Hz Surface Grinding Table Length: 254 mm Width: 508 mm Grinding Wheel(s) Dodpfx Acoymdwfspscn Outer diameter: 200 mm Width: 20 mm Bore: 31.75 mm Peripheral speed: 33 m/s Spindle Speed: 2850 rpm Radial runout accuracy: 0.005 mm X-Axis Feed speed: 5 – 25 m/min Packaging unit: 1 Scope of Delivery Unit: Piece Packing unit: 1 Digital position display Coolant system Balancing arbor Grinding wheel, grit 46 Diamond dresser Operating tools Manual oil pump LED lamp Electromagnetic chuck Demagnetization function Features Electromagnetic chuck Table splash guard enclosure Automatic demagnetization device Parallel dressing device 40 W coolant system LED work lamp Leveling feet

Condition: like new (used), Year of construction: 2015, Manufacturer: OPTIMUM Maschinen Germany GmbH Model: F 150 Machine type: 3-axis CNC machining center Serial number: 1521211505 Year of manufacture: 2015 Control: Siemens Sinumerik 828D Travel X/Y/Z axes: approx. 750 / 500 / 500 mm Tool holder: BT40 Spindle power: 12 kW Spindle power S1: 9 kW Total power: 25 kW Power supply: 400 V / 50 Hz T-slot worktable: approx. 800 × 450 mm Equipment: Dedpfx Aey Ia Uwocpjcn Integrated automatic tool changer Integrated chip conveyor Machine weight: approx. 3,520 kg

Year of construction: 2017, condition: ready for operation (used), Offered for sale is an Optimum toolroom milling machine. Drilling capacity in steel: 30mm, continuous drilling capacity in steel: 25mm, spindle taper: ISO40, quill travel: 120mm, milling head swivel range: +/-45°, cross table X/Y: 1000mm/240mm, max. cross table load: 160kg, X/Y/Z travel: 580mm/200mm/340mm, X-axis table feed: 720mm/min. Including accessories. The tray has been cut open on the right-hand side so that longer workpieces can also be machined. Dimensions X/Y/Z: approx. 2270mm/1500mm/2100mm, weight: approx. 900kg. An on-site inspection is possible. Dcsdszt Slcopfx Acpon

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 800 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 406 mm, total height: 2,150 mm, total width: 1,450 mm, table width: 230 mm, table length: 1,244 mm, table load: 230 kg, overall weight: 950 kg, spindle speed (max.): 5,100 rpm, product length (max.): 1,400 mm, number of axes: 3, This 3-axis Optimum OPTImill MF 2V was manufactured in 2017. It features a maximum vertical spindle speed of 5100 rpm and a cutter head size of 76 mm. The machine includes a horizontal milling table with a length of 1244 mm and a maximum load capacity of 230 kg. If you are looking to get high-quality milling capabilities, consider the Optimum OPTImill MF 2V drilling and milling machine we have for sale. Contact us for further details. Djdpfx Acjzq A A Hepscn - Type: Manual multifunctional 3-axis drilling and milling machine- Digital Readout: DPA 21- Modifications / Upgrades: Drive Upgrade- Total Connected Load: Approx. 1.5 kW (may be higher due to modifications)- Electrical Voltage: 400 V- Phases: 3 Ph- Current Type: ~- Mains Frequency: 50 Hz- Cutter Head Size Max.: 76 mm- End Mill Size Max.: 18 mm- Vertical Spindle Throat/Reach: 233 - 533 mm- Vertical Spindle Tool Holder: ISO 40 DIN 2080- Vertical Spindle Speed Range: 10 - 5100 rpm- Vertical Spindle Number of Speed Ranges: 6- Vertical Spindle Speed Control: Electronically adjustable- Horizontal Milling Table Length: 1244 mm- Horizontal Milling Table Width: 230 mm- Distance Vertical Spindle to Horizontal Table Min.: 57 mm- Distance Vertical Spindle to Horizontal Table Max.: 463 mm- Horizontal Table T-Slot Size: 16 mm- Horizontal Table T-Slot Number: 3- Horizontal Table T-Slot Distance: 63 mm- Horizontal Table Max. Load Capacity: 230 kg- Number of Coolant Pumps: 800 mm automatic- Vertical Spindle Continuous Duty S1 Drive Motor Power: 1.5 kW- X-Axis Travel Automatic: 24 mm- Y-Axis Travel Automatic: 20 mm- Spindle Speeds: Stepless speed control- Drilling/Milling Head Inclination: Tiltable ± 45°- Reach / Throat: 215 - 533 mm MF 2Vario DPA- Drilling Depth Stop: Adjustable with millimeter scale, readable from the front- Protective Shield: Height-adjustable, large dimensions- X-Axis: Motorized table feed, stepless speed control, rapid traverse, right/left rotation, cross table

Year of construction: 2025, condition: new, Motor power: 1.1 kW / 400 V Cutting range: 100 mm x 145 mm Coolant system: Yes Dedpfjha Nz Usx Acpecn Feed rate: continuously adjustable Saw blade speed: 45 / 90 m/min Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting angle: 0° to 60° Dimensions: 1400 mm x 685 mm x 1235 mm Weight: 185 kg

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 2,000 rpm, spindle motor power: 5,500 W, total height: 1,550 mm, total width: 1,065 mm, overall weight: 1,720 kg, product length (max.): 2,215 mm, number of axes: 2, Manual lead screw and feed rod lathe manufactured in 2018. This Optimum TH 4610 features a distance between centers of 1060 mm and a swing over bed of 460 mm. It has a spindle speed range of 25 – 2000 U/min and can handle a maximum workpiece weight of 300 kg. If you are looking to get high-quality turning capabilities, consider the Optimum TH 4610 machine we have for sale. Contact us for further details. - Machine Type: Manual lead screw and feed rod lathe with digital position indicator- Distance Between Centers: 1060 mm- Center Height: 230 mm- Swing Over Bed: 460 mm- Swing Over Slide: 270 mm- Turning Length: 240 mm- Main Spindle Bore: 58 mm- Max. Workpiece Weight: 300 kg- Morse Taper of Main Spindle: MK6 / MT6- Spindle Speed Range: 25 – 2000 U/min (rpm)- Cross Slide Travel: 285 mm- Top Slide Travel: 125 mm- Quill Diameter: 60 mm- Quill Travel: 130 mm- Taper in Quill: MK4 / MT4- Three-Jaw Chuck Diameter: approx. 200 mm- Dimensions (L x H x W): 2215 mm x 1550 mm x 1065 mm- Motor Power: 5.5 kW- Voltage / Frequency: 400 V / ~50 Hz Dcedozq Edgjpfx Acpsn