Used Pass Drill for sale (5,907)

Condition: used, Small Drilling/Milling Machine ISERT ELECTRONIC Travel X: 350 mm Travel Y: 300 mm Travel Z: 70 mm Rotation: 8000 / 9500 / 13500 / 20500 / 24000 RPM The machine could be used for drilling printed circuit boards or other use. The machine was controlled through a PC that is no longer present. Possibility to use it in manual Equipped with: 1 Milling Machine KRESS Voltage: 220 V mono Dimensions (L x W x H): 950 x 700 x 700 mm Ibjdpsz Nxwcjfx Ap Djc Weight: approx 60 KG

Condition: used, Year of construction: 1998, Fehlmann Picomax 60M Ibjdpfsz N Huvsx Ap Djc

Condition: used, Control voltage: 42/48V, max. fuse rating: 35A, operating voltage: 380V, rated current: 20/22/24A, control: DECKEL DIALOG 11, an on-site inspection is possible. Ibsdpsz H Utmsfx Ap Dsc

Condition: used, Year of construction: 1999, Machine number: 9114108 Weight (approx.): 150 kg Motor power: 0.71 / 1.26 kW Overhang – stand to drilling center: 600 mm Max. material height: 200 mm Table width: 1000 mm Number of drilling spindles: 4 Drill chuck: Screw-in thread Drilling depth limitation: Yes Ijdpfx Ajzd Hntop Debc Drilling stroke: 70 mm Speeds: 1400 / 2800 rpm Workpiece clamp: Yes Drilling feed: Hand lever Working height or feed table height: 890 mm, with lighting Storage location: Nattheim

Condition: ready for operation (used), Year of construction: 1989, Semi-automatic broach sharpening machine 3M601Ф1 Manufacturer: Vitebsk Tool Grinding Machines Iodpfx Apezx Tims Debc Specifications: Max. external diameter of round broaches: 250 mm Max. workpiece length (between centers): 2000 mm Application: Round, spline, flat, face, and keyway broaches.

Condition: new, bore capacity in steel (diameter) 32 mm throat 257 mm bore stroke 115 mm boring spindle MK 4 boring chuck 16 mm bore depth 120 mm table surface area 475 x 425 mm column diameter 92 mm total power requirement 1,1 kW weight of the machine ca. 0,135 t dimensions of the machine ca. 0,75 x 0,85 x 1,72 m Sturdy bench drill with - Keyless chuck Ibsdpfx Aefv H H Ujp Doc - Drilling depth setting - emergency stop - Rotatable table top

Condition: reconditioned (used), -Drill diameter: 5~25 mm -Drilling depth: 1500 mm -Tailstock -Tank Ibedohuil Rjpfx Ap Dsc -Pump -Filter

Condition: new, Drilling capacity in St 60 40 mm threading in St 60 M 24 mm threading in GG 20 M 30 bore stroke 120 mm Short spindle MK 3 throat 293 mm column diameter 115 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle - machine table min./max. 117 / 701 mm feed 0,10 + 0,20 mm/U spindle turning speed range 160 - 2250 UpM total power requirement 1,45 / 1,9 kW height of the machine 1840 mm Ibjdpfx Aegp Dyxjp Djc weight of the machine ca. 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pump with motor protection switch, complete fitting

Condition: new, bore capacity in steel (diameter) 28 mm throat 320 mm Isdpfxofhk Ufs Ap Debc bore stroke 150 mm spindle taper MT 3 MK table: 500 x 350 mm column diameter 105 mm turning speeds 75 - 3010 U/min total power requirement 0,9 / 1,2 kW weight of the machine ca. 235 kg. range L-W-H 1740 x 670 x 850 mm

Year of construction: 2024, condition: new, machine/vehicle number: KU 2400, The cabbage coring machine provides the ability to cut cabbage core out of the head or more often, crush the stalk (then there is an opportunity to use raw materials 100 percent, it is also useful for the quality of sauerkraut). Combined electric and pneumatic power.​ General Features: Isdpfx Apjffwfyo Djbc All materials that come in contact with products are made from food-grade materials Productivity is up to 2400 heads per hour Two coring lines Can be used to cut irregular shape cabbages also Easy to clean, can be washed with low-pressure water; Can be equipped with wheels with a fixation for easy transportation; Can work separate as well in line with cabbage shredder SS80 7500kg/h Various electrical connections and standards available on request;

Condition: new, grinding range 8 - 32 mm sharp cornered angle min./max. 90 - 140 Grad connected load 230 V weight of the machine ca. 16 Kg dimensions of the machine ca. 0,43 x 0,24 x 0,24 m Drill grinding machine: Additional station for grinding back the drilling cutting surface (clearance angle) 25tk. Collets ER 40 are included in the scope of delivery, these are also Iodpfx Ajupxh Njp Dsbc suitable for clamping intermediate sizes. For grinding twist drills made of HSS and Hard metals with a TiN layer of 8 - 32 mm. Rotor with precision ball bearings guarantees smooth running. Vibration-free running thanks to its heavy weight and rubber feet. Sharpening angle adjustable for all common twist drills. Package dimensions: 430 x 240 x 240mm. Weight 16kg.

Condition: new, bore capacity in steel (diameter) 40 mm throat 300 mm bore stroke 120 mm spindle taper MT 4 MK Ibsdpfx Apsupxi Ho Doc table: 500 x 460 mm column diameter 115 mm turning speeds 75- 3200 U/min feeds 0,1 - 0,18 - 0,26 mm/U total power requirement 1,5 kW weight of the machine ca. 350 kg range L-W-H 2,2 x 0,8 x 0,7 mm Column drilling machine with: automatic feed Thread cutting function. Digital depth display Coolant system 2 stage motor Spindle protection Swivel table Pivoting drill head LED lighting Packaging dimensions: 730x760x188mm Weight 340kg

Condition: new, bore capacity in steel (diameter) 30 mm throat 270 mm bore stroke 125 mm 4 Motor output 9 speeds 70 - 2800 U/min Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display * Separate emergency stop button Ibedpfx Apoun Um Ee Doc * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch * Thick-walled steel column for high power absorption and stability * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm - T-Nuts -expectors - Operating tool - BMP 160 machine vice

Condition: new, bore capacity in steel (diameter) 32 mm throat 200 mm bore stroke 120 mm spindle taper MT 4 MK table: 290 x 270 mm column diameter 92 mm turning speeds 150 - 2450 U/min feeds 0 mm/U total power requirement 1,1 kW weight of the machine ca. 95 kg range L-W-H 0,66 x 0,8 x 1,7 m Column drilling machine with: ARBO / CE approved protective cover. Quick release chuck with pin. Iodpfx Apeupw Sas Dobc Tiltable work table. Deep stop. Ejector wedge.

Condition: new, bore capacity in steel (diameter) 16 mm throat 185 mm bore stroke 50 mm 20 mm Ibjdpfx Asurznwop Dec spindle taper MK 2 spindle diameter mm spindle turning speed range 100-1500 / 200-3000 U/min 175 mm 280 mm table surface area 500 x 180 mm connected load frequency 230 V total power requirement 0,85 kW weight of the machine ca. 0,12 t dimensions of the machine ca. 0,86 x 0,6 x 0,9 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Condition: new, bore capacity in steel (diameter) 30 mm throat 254 mm bore stroke 120 mm 4 Motor output 9 speeds 120 - 1810 U/min column diameter 92 mm table surface area 475 x 425 mm total power requirement 1,1 kW dimensions 915 x 450 x 1705 mm weight ca. 135 kg Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch * Thick-walled steel column for high power absorption and stability * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm Ibsdoq Nrmrspfx Ap Dsc - T-Nuts -expectors - Operating tool - BMP 160 machine vice

Condition: reconditioned (used), Year of construction: 1998, coffin saw with drill Eugen Mayer lignum Eugen Mayer 715 column drills used 1998 Mark: eugen Model: Mayer 715 Description: beveller saw with drilling for Eugen Mayer coffins Year: 1998 Ibsdpfx Apokmgpvs Dec

Condition: new, bore capacity in steel (diameter) 32 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 460 x 460 mm turning speeds 75 - 3200 U/min engine output 1,5 kW column diameter 125 mm thread M16 ST60 feed 0,10/0,18/0,26 mm/U dimensions 800 x 500 x 2200 mm weight 350 kg - automatic drill feeds (magnetic clutch) Ibedpjkahu Refx Ap Dec - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: new, bore capacity in steel (diameter) 50 mm throat 360 mm bore stroke 150 mm spindle turning speed range 120 - 3000 U/min spindle taper SK 40 650 mm 320 mm vertical adjustment 500 mm table surface area 1000 x 300 mm connected load frequency 400 V diameter of hob max. 80 mm total power requirement 2,2 kW weight of the machine ca. 0,85 t dimensions of the machine ca. 1,25 x 1.5 x 2,3 m New Model Industrial Drilling and Milling Machine with Manual Transmission and High Speed Range. The prism guide in the Z-axis ensures a high degree of precision even in the most difficult milling jobs. Domestic equipments: • automatic feed in X-axis • 3-axis digital display • motorized Z-axis • Feed in quill Isdpfx Apsfg U S Uj Djbc • Left-right-run high • tapping attachment • Gear head swiveling • Coolant system

Condition: new, bore capacity in steel (diameter) 14 /15 mm throat 180 mm bore stroke 70 mm turning speeds 420 - 2100 U/min Ijdpjfg U Tgjfx Ap Dobc 250 x 220 mm distance drilling head - clamping area max. 380 mm total power requirement 0,5/1,0 / 400 kW / Volt column diameter 65 mm tool taper MK 2 weight of the machine ca. 0,08 t dimensions 0,4 x 0,5 x 0,9 m Table Drilling Machine with: variable feed Tapping function. depth display Coolant system Belt-drive spindle protection machine light

Condition: new, bore capacity in steel 40 mm threading cutting capacity: M30 throat 310 mm bore stroke 175 mm spindle taper MK 4 feed range - spindle 20 - 400 mm/U spindle turning speed range 60 - 1250 / 120 -2500 U/min transmission ratio 2 Stufen Iedpfx Asfg U Tqsp Djbc column diameter 120 mm table surface area 550 x 400 mm total power requirement 1,5 / 3,0 kW weight of the machine ca. 0,45 t dimensions of the machine ca. 0,7 x 1,4 x 2,0 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Year of construction: 1990, condition: good (used), # 1299, drill automat with magazine, 3 piece drill motors with each 2 2 spindles and 25 mm grid, milling motor for floor groove and chain drive after general repairs and new electric and new pneumatic Ijdpecm Uf Ajfx Ap Dsbc

Condition: ready for operation (used), -Drill diameter: 5~25 mm -Drilling depth: 1000 mm -Tailstock -Tank -Pump -Filter Isdpfx Aodgpltep Dobc

Condition: not inspected (used), Year of construction: 1970, - Drilling diameter: 5-30 mm - Drilling depth: 750 mm Ijdpfx Apoxzz Hj Dobc - Filter - Pump

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK Ibjdjxabyiepfx Ap Doc table: 515 x 360 mm turning speeds 80 - 1125 U/min column diameter 115 mm thread M 24 ST60 thread M 30 GG20 feed 0.10 + 0.20 mm/U distance spindle /table 117 / 701 mm engine output 1.0 / 1.6 kW weight 270 kg Machine height 1840 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 25. Coolant system B.