Used Pipe Benders for sale (3,380)

Condition: used, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 02/2027, loading space volume: 30 m³, total length: 8,790 mm, total width: 2,550 mm, total height: 3,760 mm, Year of construction: 2024, Equipment: ABS, KÄSSBOHRER V2A slurry tank semi-trailer, 30,000 liters - Type STN 30L/1 - 12/27 First registration 02/2024, German registration and from first owner Mileage only 32,771 km V2A stainless steel tank Diameter 2,200 mm 3 baffle plates 1 filling dome DN500 with hinged cover Rinsing line 4 inches through the entire tank Rotary lobe pump VOGELSANG VX 186-260 Q GL, 6,000 liters/min., interchangeable housing shells Complete piping in V2A stainless steel Rotating outlet at the rear in 6", with emptying device 8" suction port at the rear top 6x LED work lights Large hose trays on the left and right BPW axles with disc brakes WABCO Trailer-EBS with RSS stability program WABCO Optiturn - OptiTurn automatically detects when a vehicle enters a curve and then loads or unloads or lifts the third trailer axle. This improves the maneuverability of the trailer in confined spaces, as the turning circle becomes smaller and tighter curves can be taken. Furthermore, it improves the turning ability when reversing. Fjdpfxsz Am Evo Am Eopp 1st axle: LIFT AXLE Tires: 6x 385 /65 R 22.5 RENTING is the new BUYING; with us, full-service rental is available IMMEDIATELY.

Condition: used, operating hours: 15,034 h, total length: 7,700 mm, total width: 2,300 mm, total height: 1,700 mm, Year of manufacture: 1980 Colour: Green Empty weight: 10.000 kg Price: On request - Year: 1980 - Serial number: 1500 - Operating hours: 15034 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 - Power [kW]: 6.0 - Max. sheet thickness [mm]: 8 - Max. prebending thickness [mm]: 8 - Max. working width [mm]: 3000 - Top roll diameter [mm]: 300 - Bottom roll diameter [mm]: 220 - Options: Cone rolling, Plate support - Transport dimensions: 7700mm x 2300mm x 1700mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Fpodpfx Amj Agwvxs Eop

Condition: new, 50 mm 8,5 U/min 100 kN roll diameter 162 mm Fpodpfxjy H N Hae Am Esp Drive 1,5 kW weight 495 kg range L-W-H 1100x850x1100 mm Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage

Condition: new, 50 mm 8,5 U/min Fjdpfxjy H N Hmj Am Eopp 100 kN roll diameter 162 mm Drive 1,5 kW range L-W-H 1100x800x1500 mm weight 450 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set

Condition: new, 40 mm 8,5 U/min 120 mm roll diameter 152 / 162 mm Fpsdpfx Amoy H N I De Eep engine output 1,1 kW connected load 400 V weight 395 kg Overall size 900x600x1100 mm Equipment / Accessories: - Two driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used

Condition: new, Year of construction: 2025, Timely delivery, trustworthy equipment ! Are you looking for quality and expertise for your sheet metal processing machine? Then we are the right partner at your side. Folding bench ZGR-2000T/0.8 incl. transport rollers Fjdpfxjcxu Uxo Am Ejpp Maximum working length of press brake: 2140 mm Bending performance: up to 0.8 mm (steel sheet) Titanium Zinc Sheet: 0.8mm Aluminum Sheet: 1.2mm Copper Sheet: 1.25mm Bending machine bending angle: 145 degrees max Cut with the roller shears over the entire working width Bending beam thickness: 15 mm Cut with the roller shears over the entire working width Lifting of the upper beam in three positions Upper beam stroke: 80 mm degree scale Weight of the folding bench: approx. 180 kg Roller scissors 0.8mm plus 350 euros Manual folding machine 75 euros Price: 1350 euros Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 19% of VAT.

Condition: new, Year of construction: 2026, Are you looking for a machine for sheet metal processing? Do you expect quality and reliability? Professional advice as well as accurate and punctual deliveries will be provided by Prod-Masz. ZGR-2140/1.5mm (2mm Alu) the maximum working length 2140 mm the thickness of the steel sheet up to 1.5 mm Fsdpfx Amec Ikrqj Ejpp non-ferrous metals 30% higher bending performance bending angle: 145 degrees (on request up to 165 degrees) cut throughout the working length a table for supporting the rear plate gas springs beam curving 20 mm weight approx 350 kg hand-held machine raising the upper beam into three positions maximum ground clearance of 100 mm between the beams

Condition: new, Year of construction: 2025, Sheet metal folder directly from polish manufacturer Prod-Masz. Fodpfjc Nxwyex Am Eopp Plate Bending Machine ZGR-1400/1.2mm Technical data: - Maximum working width: 1400 mm - Sheet gauge up to: 1.2 mm (Steel) - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 15 mm - Protractor - Weight: 150 kg - Rotary shears (max. plate gauge 0,8 mm / Steel) - The machine have certificate CE and 12 months warranty. Shipping costs: its dependent on destination point ONLY SHIPPING IS POSSIBLE Price: 1050 Euro ( VAT excl. ) Contact with what's app We provide invoices with 0% of tax.

Condition: new, Year of construction: 2025, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need fior additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Fpsdpfehwrhmsx Am Ejp Cooling Mode: WATER COOLING

Year of construction: 2002, condition: refurbished (used), Used refurbished Salvagnini P4 panel bender / cnc folder for sale complete with sheet metal loading system Salvagnini P4 PERFORMER refurbished in 2012 for sale – Made in Austria: Specification – new / year 2002 – machine revised in 2012 Max Bending Length 1850mm Max width of finished Panel 1500mm Max Diagonal of incoming sheet 2150mm Max length of incoming blank 2000mm Max width of the blank 1500mm Max bend height 127mm Max thickness of material at 400 N/mm2 (m/s) 2mm Bending angles obtainable -125 Degree to +125 Degree Fsdpfx Asgu Dynom Espp Total machine hours on 23,000 Sheet metal load and unload system: Configuration ADP 2715 SAP 211618 POS P4.1812 Servo-controlled panel bender Upper Bending blade Lower Bending blade Chiller Used Salvagnini machines wanted and for sale, models such as: S4 –30 Auto load/unload Punching,Salvagnini P4 2512 ALA Panel Bender, Salvagnini P2 Performer Panel Bender, Salvagnini S4.30,Salvagnini P4.2512 Panel Bender,Salvagnini P4.2512,P4 2516ABA, Salvagnini P4 1712, Salvagnini P4 2112 HPT Panel bender,Salvagnini P2 Performer Panel Bender, Salvagnini P4.1712, Salvagnini P4.2516ABA Automated Panel Bending System

Year of construction: 1980, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1980 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 130 mm Rolling thickness 5x toproll Ø 140 mm Rolling thickness prebending 120 mm Top Roll Ø 950 mm Bottom Roll Ø 850 mm Side roll Ø Fpedpfxjkvm Szo Am Eop 180 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 0 - 400 mm/min. Adjustment side rolls 0 - 400 mm/min. Number of driven rolls 2 Power 132 + 37 kW Dimensions (Estimate) Length 12000 mm Width 5440 mm Height 5650 mm Weight 286000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1978, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1978 Specifications Metric US Standard Rolling width 3050 mm Rolling thickness 3x toproll Ø 60 mm Rolling thickness 5x toproll Ø 70 mm Rolling thickness prebending 50 mm Top Roll Ø 630 mm Bottom Roll Ø 600 mm Side roll Ø 500 mm Number of rolls Fpodpfokvm S Nsx Am Eep 4 Rolling speed 0 - 5 Adjustiment lower roll 200 mm/min. Adjustment side rolls 200 mm/min. Number of driven rolls 2 Power 120 kW Dimensions (Estimate) Length 5790 mm Width 4200 mm Height 4200 mm Weight 85000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2006, machine/vehicle number: PST18, Tecnoindustria Used Pasteurizer Completely OverhauledTecnoindustria-brand mesh-belt pasteurizer, constructed entirely of stainless steel with a square-mesh stainless steel belt. Includes water recirculation tanks with associated pumps, an infeed and outfeed conveyor for jars or crates, a blower system for drying jars or crates, a steam modulation unit, a heat exchanger, all necessary connecting piping, and all other accessories required for operation.The machine has been completely overhauled.It is made up of two sectors of which: Fjdpfx Amjvguhkj Espp first sector useful length 11450 mm second sector useful length 7350 mm overall dimensions: Total length 18.70 meters without ribbons Useful belt length axis by axis: 18.45 m Useful net width 2.00 m. Overall width of the machine body 2.36 m Overall width including trays 2.36 m + 0.65 m total 3.01 m Total useful area of the machine sq.m. 36.90 Height 1400Features by sectionSterilization length: mm. 7,700 useful Pre-cooling length: mm. 3,300 useful Length of warm water cooling + cooling: mm. 7,000 useful Height mm 1400 Single track entry belt width: mm 200 Length: mm 3200 Single lane outfeed belt with Intralox belt width: mm 400 length: mm 3700 usefulTecnoindustria Used Pasteurizer Completely Overhauled, The machine is totally overhauled, in excellent condition.It is necessary to build the electrical panel, this is missing in this equipment. Its construction is therefore carried out and created with the customer’s specifications, adapting the pasteurization areas to the production needs. Its speed on the 65 diameter is approximately 18,000 pieces per hour, speaking of cylindrical containers. This used tunnel pasteurizer is ideal for both tomato preserve jars and for tinplate and aluminum cans. Both fruit juices and soft drinks and even tomato puree can be pasteurized.The used tunnel pasteurizer has already been overhauled and is ready to be purchased and delivered to the end customer, we will follow all the issues related to its loading on trucks or containers included in the price.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, travel distance X-axis: 6,000 mm, positioning speed: 100 m/min, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, total length: 6,000 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, fume extraction, nozzle changer, safety light barrier, 3 Chuck Professional pipe laser cutting machine (GS-6022HG) Working area (L/W): 6000mm*φ220mm Repeat positioning accuracy: ≤0.03mm Max. positioning speed: 100m/min Max. acceleration: 1.0G Max. rotating speed of chuck: 110r/min Machine weight: 10T Round pipe: Φ15mm-Φ220mm Square pipe: 15mm*15mm ~ 150mm*150mm Rectangular pipe: 30*20mm~160*80mm Oval tube/flat oval tube: Short axis≥15mm, long axis≤210mm Channel steel: Max 20# I-beam: Max 18# H steel: Max 175*90mm Fodpfx Amjvrwt Te Eepp Supports high-precision cutting of round tubes, square tubes and special-shaped tubes. Flexibly adapts to different specifications of tubes.

Condition: good (used), WEBER tube extrusion line including: Fpodpjvryhyjfx Am Ejp WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Battenfeld V125

Condition: used, 4 units electric blankets for heating of plastic pipes size 1,970 x 470 mm connection 220 V Fedpfx Aovimr Tsm Ejpp storing in KG pipes - complete sale -

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 32 mm, bending angle (max.): 190 °, bending radius (max.): 220 mm, power: 8.2 kW (11.15 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Servo - Hydraulic, operating speed: 99 mm/s, pressure: 150 bar, wall thickness: 2 mm, working length: 2,500 mm, Equipment: documentation/manual, 32x2mm Fully Automatic Tube Bending Machine The “Atlas” tube bending machines are nc structures. This type of tube benders includes hydraulic and pneumatic for all clamping and pushing operations. Atlas has 3 different type which are NB, NBR, NBRF. NB series makes bending operation automatically. NBR series makes bending and rotating operation automatically. NBRF series makes bending, rotating and feeding operation automatically. A.C servo engine control gives semi automatic bending capability for NBR and NBRF series. With ergonomic loading height, machine is accordance with health and safety instructions and can avoid the ergonomy problems. Fedpfx Aovwg Hmsm Ejpp Improvable program setup settings for optimizing the results of your bending projects, program setup settings that can be developed. With energy saving mode, your energy efficiency will be increased, the nature and our future can be protected. Inverter control system, a new generation of precision bending system, can help to optimally actualize your bending project. Powerbend mode will help the bending process of your difficult bending materials. User-friendly, easy and quick to learn interface which allows you to quickly start the new projects. Easy to use with min 10-inch touch screen HMI. Fast and accurate bending with minimal friction with the help of Linear Guide. Flexible bending ability with the help of rotation of bending head. Bending precision will be top level with the help of Non-Vibrating structure. Easy to understand and solve the problems with the help of end user error messages, it will help to keep your business on running. Quality bending with wiper, ball mandrel and other systems.

Condition: excellent (used), Year of construction: 1995, 3 HEIN TVP 160 PIPE SAWS in stock Year of manufacture: 1995 Fedpfx Ajvwm N Usm Espp With chip jaws Application: Cutting and chamfering PE, PP, and PVC pipes: Smallest diameter: 30 mm Largest diameter: 160 mm Also suitable for short lengths from 10 cm Condition: The pipe saw is operational The saw is my property Location: Sachal Extrusionsmaschinen, Bahnhofstr. 6 D-26345 Bockhorn-Grabstede, Germany

Year of construction: 2007, condition: excellent (used), EXTRUDEX EXTRUDER EN50-30D year 2007 no. 4101264, with melt pump, screen changer and 5 layer pipe head Year of manufacture 2007 As well as 4 co-extruders EXTRUDEX EN25-25D, year of manufacture 2007 APPLICATION: Production of PE 5 layer pipes Max diameter 32 mm INVENTORY: 1 single-screw main extruder EN 50 4 co-extruders single-screw auxiliary extruders The extrusion system is my property Location: Fpodpsvyaxusfx Am Ejp D-26345 Bockhorn-Grabstede, Bahnhofstr 6, Germany

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: manual, actuation type: manual, bending angle (max.): 130 °, overall weight: 280 kg, warranty duration: 24 months, Sheet Metal Bending Machine / Bender / Brake - RG-C 2012 + Cutter 2.0-Meter Sheet Metal Bender – Professional Tool for Roofers Our 2.0-meter sheet metal bender is a durable and precise machine designed for roofers and sheet metal professionals. With its sturdy construction and advanced mechanisms, it ensures high reliability and ease of use, even under intensive operation. Equipped with additional functionality-enhancing features, this model allows for greater precision, repeatability, and ease of metal sheet handling. Key Features: ✅ Working length: 2100 mm – enables efficient bending of sheet metal, increasing productivity. ✅ Sturdy steel construction – guarantees longevity and resistance to deformation. ✅ Precision bending – perfect for producing roofing elements, sheet metal trims, and gutters. Fjdov D Hw Sspfx Am Espp ✅ Easy operation – an intuitive control mechanism enables quick and accurate sheet shaping. ✅ High clamping force – stabilizes the material, ensuring uniform bending along the entire length. ✅ Optional accessories – possibility to equip with additional accessories for enhanced functionality. Our 2.0-meter sheet metal bender is an indispensable tool on any construction site, improving the quality and efficiency of roofing work. ❗️2.0-Meter Sheet Metal Bender – Technical Specifications❗️ Maximum bending length: 2100 mm / 83" Maximum bending capacity: ➡️ Steel sheet: up to 1.2 mm ➡️ Aluminum sheet: up to 1.5 mm ➡️ Copper and zinc sheet: up to 1.5 mm ➡️ Stainless sheet: up to 0.6 mm Maximum bending angle: 130° Bending beam thickness: 25 mm Maximum clamping beam lift height: 100 mm Overall dimensions: 2460 x 900 x 1200 mm Weight: Approx. 280 kg (varies depending on configuration) Clamping system: Manual with high clamping force for stable operation Construction: Heavy-duty steel frame ensuring durability and precision Accessories (included): ▪️Back support arms for large sheets ▪️Functional protractor for precise angle bending ▪️Roller cutter / shear - for quick and precise cutting of sheet metal along the working length of the bending machine Optional accessories (not included): ▪️Swivel casters with brake Enhanced Features for Precision and Efficiency: 👉 Rear support table – simplifies sheet metal positioning for smooth, accurate processing. 👉 Angle gauge – ensures repeatability of bending angles for consistent results. 👉 Front measuring bumpers – enable cutting multiple sheets to the same width without additional measurements. 👉 Solid steel springs – assist the bending beam, providing lifelong durability and eliminating the need for replacements, unlike gas springs. 👉 Turnbuckle adjustment – allows fine-tuning of the clamping beam force based on the thickness of the processed sheet, ensuring a secure and even hold. Applications and Benefits: This 2.0-meter sheet metal bender is an essential tool for roofing contractors, sheet metal workers, and workshops, offering an efficient and precise solution for bending roofing components, flashings and various sheet metal trims. With its user-friendly features, repeatable precision, and enhanced durability, it is the perfect choice for professionals seeking high-quality results. The price does not includes shipping cost. Contact us for more information and to find the perfect model for your needs!

Condition: new, R10-R260 210 ° bending speed 2 U/min 1 1/4" x 3,5 mm Fsdjyv I Tkspfx Am Eopp einphasig - 230 V drive motor 1,1 kW < 70 dB weight of the machine ca. 80 kg dimensions of the machine ca. 410 x 1000 x 570 mm Accessories / equipment: Hard copper and aluminum: 54x2 mm Steel tube: 42x3 mm Stainless steel: 42x2.5 mm Solid material: 30 mm Number of programs: 30 each 9 bends Control: Soft-touch control panel in 8 different languages Mobile by driving device The controller allows easy programming of the automatic cycle The controller is equipped with a system diagnostics and has a great language selection. Patented fast tool change system A single bending speed

Condition: new, I-beam section - upend 100 x 20 (d 2100) mm tube diameter max. 100 x 3 (d 3000) mm L-beam 80 x 80 x 8 (d 2000) mm Fpsdpoyv Nniefx Am Eep square material 50 x 25 x 2 (d 600) mm bar material - diameter 60,0 (d 1000) mm I-beam section - flat steel 120 x 30 (d 600) max. 140 mm tool taper 80,0 turning speeds 4,2 U/min weight 1600 kg dimensions 1240 x 1375 x 1540 mm Domestic equipments: - Welded steel structure (St-52) - Rollers are driven by 3 separate hydraulic motors - Stepless speed - Special steel gears - Shafts are made of special steel, hardened and ground - Manual lubrication - Guide rollers are hydraulically adjustable - Lower rollers are hydraulically movable up and down - Infinitely adjustable speed of the lower rollers, move after below and above - Digital display for lower rollers - Separate and movable control panel - Horizontal and vertical operation - Production quality certified according to CE, ISO 9001 - 2015, TSEK and TURQUM Additional equipment: - hydraulically adjustable straightening rollers

Condition: used, mileage: 234,000 km, power: 115 kW (156.36 HP), first registration: 11/2018, fuel type: diesel, overall weight: 3,500 kg, color: orange, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 6,000 mm, loading space length: 3,600 mm, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Buy online. Finance digitally. Have it delivered nationwide. ----Chat with us now via WhatsApp: Get in touch quickly and easily with our sales consultant. Internal ID number: [ 3512 ]---- Your advantages with us: * Digital consultation by phone or WhatsApp * Financing options available even without a down payment * Trade-in of your vehicle, old or new Optionally bookable: * 12-60 months used car warranty (valid throughout the EU) * New inspection * New TÜV & emissions test * Nationwide delivery---- Summer offer: Upon request and for an additional charge of only €999, increase the trailer load to up to 3,500 kg (vehicle and manufacturer dependent). Vehicle highlights: 19% VAT deductible German vehicle Accident-free 1st owner Euro 6 standard 3rd gear is difficult to engage High + long Rear view camera Trailer coupling = 3,500 kg Air suspension Cruise control Automatic climate control Cargo area power generator Comfortable driver's seat Cargo area wood-lined Bluetooth multimedia function Special equipment: Storage compartment on the dashboard with USB connection, trailer socket 13-pin, trailer socket preparation, audio navigation system: CD player MP3-capable, USB and Bluetooth hands-free system, audio/telephone controls on the steering wheel, digital tachograph, rear door (opening angle 260 / 270 degrees), automatic climate control, refrigerant compressor 170 ccm, interior filter: pollen filter, smoker's package, spare wheel in driving condition, spare wheel holder between the longitudinal supports Additional equipment: Airbag driver's side, traction control system (ASR), design: S-series, exhaust pipe on the left side, exterior mirrors electrically adjustable and heated, ceiling light in the cargo area, electronic brake force distribution, front axle suspension: transverse leaf spring, split doors at the rear, windshield and side windows tinted, generator 150 A, speed limiter 160 km/h, body/structure: high-roof box van, instrument cluster with pixel matrix display, fuel tank: 70 liters, cargo area partition, headlight range adjustment, engine 2.3 liters - 115 kW diesel, wheelbase 3520 mm, tire repair kit, low emissions according to Euro 6 emission standard, sliding door loading/passenger compartment right, seats in the driver's cab: passenger single seat, 3-way adjustable, steering-AV overhang, maintenance indicator, permissible total weight 3.50 t ---- Do you want to lease or finance? We offer attractive deals - also possible without a down payment! Feel free to contact us. Contact: Fodpfx Aezwtrljm Espp Phone: WhatsApp: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln - Germany Opening hours: Mon-Fri: 9:00 a.m. - 6:00 p.m. Sat: 9:00 a.m. - 2:00 p.m. All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typing errors and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances.

Condition: new, Year of construction: 2026, The manufacturer guarantees the cleaning quality The system of automatic vibrating cleaning of the filter cloth - during breaks and during filter operation, it allows for constant monitoring of the correct operation. Technical specifications: • Conforms to H-2 standard • Extraction capacity ~ 4500 m3/h • Motor power 3.0 kW • Speed 3000 rpm • Voltage 400V, 50Hz Fedpfsgyfmajx Am Ejpp • Suction connection 200 mm • Polyester filter material, 5 microns • Filter surface 8.8 m2 • Speed 28 m/sec. • Number of filters 18 • Dimensions 752 x 1502 x 2144 mm • Weight 180 kg • Category of filters G • Polyester filter material • Noise 80 dB without connection, 65 dB when connected to the machine via pipe Delivery set: - 5 micron polyester filter - 1 container - Running gear - Filter cleaning using a controlled vibration system - Fire extinguisher - Fulfill H-2 Norms + 850 euros for the model with fire extinguisher (Safe System)

Condition: used, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2021, next inspection (TÜV): 01/2027, loading space volume: 30 m³, total length: 8,790 mm, total width: 2,550 mm, total height: 3,760 mm, Year of construction: 2021, Equipment: ABS, KÄSSBOHRER V2A slurry tank semi-trailer, 30,000 liters - Type STN 30L/1 - 12/27 First registration 01/2021 German registration, first owner Mileage only 132,802 km V2A stainless steel tank Diameter 2,200 mm 3 baffle plates 1 filling dome DN500 with hinged cover Rinsing line, 4 inches, running through the entire tank Rotary lobe pump VOGELSANG VX 186-260 Q GL, 6,000 liters/min, interchangeable housing shells Complete piping system in V2A stainless steel Rotating discharge outlet at the rear, 6", with air purge system 8" suction port at the rear, on top Fpode Aimlkopfx Am Eep 6x LED work lights Large hose trays on the left and right BPW axles with disc brakes WABCO trailer EBS with RSS stability program WABCO Optiturn - OptiTurn automatically detects when a vehicle is entering a curve and then loads or unloads, or lifts the third trailer axle. This improves the maneuverability of the trailer in confined spaces, as the turning circle is reduced and tighter curves can be taken. Furthermore, it improves the turning ability when reversing. 1st axle: lift axle Tires: 6 x 385 / 65 R 22.5 Aluminum rims with black glossy finish RENTING is the new BUYING; with us, full-service rental is also IMMEDIATELY available.