Used Plasma Oxygen Cutting for sale (13,903)

Year of construction: 2007, condition: ready for operation (used), A Kjellberg plasma cutting system is available. Plasma source: Kjellberg HiFocus 160i, max. material thickness: 40mm, track width: approx. 3100mm, gantry dimensions X/Y: 2000mm/2000mm, runway height: 500mm, working dimensions X/Y: 2000mm/12000mm. The machine was expanded with inkjet in the year 2015. Including suction and filter. The control was renewed in the year 2021. Documentation available. An inspection on site is possible. Rsdpfx Ajxwn Inegzel

Condition: used, Year of construction: 2018, 2018 plasma cutting machine, in good condition, lightly used. Sold together with metal racks or separately. Equipped with three cutting heads – one plasma and two gas cutting heads. The machine can operate either the plasma head or both gas heads simultaneously (up to 100 mm thickness, using different technologies). For thicker materials, only one gas head can be used due to gas console throughput. Plasma Year of manufacture: 2018 Plasma source: Kjellberg HiFocus 300A Working area (X x Y): 2500 x 13000 mm table (1m safety zone, two 6000mm sheets placed on the table) Minimum/maximum cutting thickness: Mainly used within 20 – 70 mm range, virtually no minimum limit – plasma can cut from 2 mm, maximum with gas is 300 mm. Plasma is intended for quality cutting of mild steel up to 50 mm. Racks Manufacturer: OHRA GmbH (Germany) Year of manufacture: 2018 Redpfx Agoww Sy Dezsl Shelf load capacity: 3T If you have further questions, we will be happy to answer them.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, working range: 3,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness aluminum (max.): 50 mm, table height: 1,750 mm, table length: 3,710 mm, working width: 1,500 mm, table width: 1,960 mm, We are selling a Swift-Cut 3000XP CNC plasma cutting center with a Hypertherm MAXPRO200, purchased mid-2023. The machine has seen very little use. According to the manufacturer, the maximum sheet thickness is 50 mm; we have cut sheets up to 40 mm thick. The cuts were clean and straight, with minimal slag. Piercing in the middle is possible up to 32 mm thickness. The machine offers online support from Swift Cut in both English and German. Solid Edge software is installed on the machine. Rodpexxighofx Agzsl The machine is immediately available. We are planning to invest in further production equipment. The unit is located at our subsidiary in the Czech Republic – Vrbno pod Pradědem.

Condition: ready for operation (used), MGM Omnicut 3100 – CNC cutting machine for plasma and oxy-fuel cutting Rodpfxsxk Trrj Agzjl High-quality CNC cutting machine, ideal for high-precision plasma and oxy-fuel cutting of structural steel, stainless steel, and non-ferrous metals. — Technical Specifications • Machine type: CNC cutting machine • Model: Omnicut 3100 • Working area: 2,000 × 4,000 mm • Required floor space: 6,500 × 3,500 mm • Maximum positioning speed: up to 20 m/min • Positional accuracy: high precision in cutting and positioning • Programming software: SAPSproW standard version, with optional upgrade for bevel or drilling technologies Axes & Drives: • X-axis: robust H-beam design with precisely ground rack and pinion • Dual-sided drive on the X-axis for maximum stability and durability • Y-axis: maintenance-free linear guides, suitable for both light and heavy equipment • AC servo drives controlled via frequency converters, maintenance-free Cutting Technologies: • Oxy-fuel: Electric torch carriage with capacitive height control system • Plasma: Electric torch carriage with programmable height control system • Supports additional technologies such as bevel torches and drilling units — The machine is in excellent condition and ready for immediate use. • Inspection at any time • Loading and transportation can be organized without difficulty — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are plus VAT. Subject to prior sale and errors.

Condition: good (used), Year of construction: 2019, functionality: fully functional, sheet thickness (max.): 30 mm, table length: 6,000 mm, table width: 2,000 mm, - Includes Katana control system - Kjellberg Hi Focus 161i neo plasma source with automatic gas mixing console - Machine table size: 6,000 x 2,000 mm - Marking and cutting of structural steel up to 30 mm (also suitable to a limited extent for aluminium and stainless steel) - Includes nesting software Sigmanest (dongle version with no ongoing costs) - Includes accessories (see pictures) Redpfx Asxl Ayzsgzsl - Includes extraction system (see pictures) The machine has been regularly maintained and seldom used (approx. max. 8 – 15 hours per week). The plasma cutting system is still in operation and can be inspected and tested on site by prior appointment. We are happy to recommend a specialist company to assist you with dismantling and relocating the machine if required. Original purchase price WITHOUT accessories: €140,000 plus VAT. Subject to change and error. Sale exclusively to businesses, with VAT shown separately. No warranty or guarantee. Immediately available. No dismantling or delivery – collection ex works only!

Condition: excellent (used), Plasma cutter SAF Nerta Zip 20-40 A Type 0408_2240 380 Volt 10/18 A Redpfxsvdqkvj Agzjl 220 Volt 16/30 A Cutting current 20/40 A Transport dimension : Length 700 mm width 430 mm height 970 mm Weight 90 kg

Condition: good (used), Year of construction: 2016, Used plasma cutting machines from Soitaab (Italy) Model: Plasmatech 3015 Table dimensions: 3000 x 1500 mm Hypertherm HPR 130 XD plasma source Marking pen Rjdpfx Agewx I Nqjzel Torit extraction system Year of manufacture: 2016

Condition: used, Year of construction: 2007, functionality: fully functional, For sale: CNC plasma cutting machine – designed for the production of flue caps and ventilation components. Condition: Used, in good technical working order, currently connected – viewing and testing on site possible. This equipment is intended for the manufacture of pipes, chimney caps, and ventilation elements from sheet metal and light metals. Technical specifications: - Year of manufacture: 2007 - Cuttable pipe diameter: from Ø60 mm to Ø600 mm - Maximum product length: 1500 mm - Sheet thickness (official): 0.5 – 1 mm - Tested capacity: cutting up to 3 mm wall thickness (depending on plasma source and metal type) - Plasma power sources: 2 units – 60A and 80A - Plasma output: 60 A / 80 A (depending on selected source) Features and equipment: - Fully programmable CNC controlled machine - Ability to generate cutting contours based on model or template - Precision automatic positioning and rotation system - Adaptable to different pipe diameters - Integrated plasma cutting control system with adjustable output - Comes with two plasma power sources (60A and 80A) – to suit your production needs Application: - Suitable for the production of ventilation systems, flue caps, ducting, and various tubular structures Rjdpfxexlp Sqo Agzsl - Suitable for cutting thin sheet metal (0.5–1 mm) as well as processing thicker walls (up to 3 mm) - Utilization of CNC technology ensures high cutting precision and repeatability, reducing manual labor requirements If you have any further questions, please feel free to contact us.

Condition: used, Plasma cutting unit Harris Type Plasma Cutting H 35 A Machine No. Year of manufacture approx. 1994 Output 35 Amp. Cutting capacity approx. 4 mm Torch package length approx. 7 meters Rjdpexciumefx Agzsl Compressed air connection approx. 6 bar - with pressure reducer Power supply 380 Volt, 50 Hz Space requirement (L x W x H): 550 x 400 x 960 mm Weight approx. 50 kg Good condition

Condition: new, cutting range for steel to 15.0 TS mm cutting range for steel to 10.0 QS mm capacity at 100% 25.0 Ampere cutting medium Druckluft output von 20 - 40 Ampere voltage 230 V Air consumption 230 l/min. output Eingang 4.9 KW weight 8.0 kg range L-W-H 505 x 147 x 305 mm The Avalon 40.1 is a light, handy plasma cutting system with high Redpfxjxaavco Agzjl Cutting performance and top cutting quality. Their light weight and simplicity Handling makes them the ideal candidate for crafts, workshops and Industry. Cuts carbon steel, stainless steel, aluminum, copper... Characteristics - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch to activate airflow to test air pressure . without having to trigger the burner. - Powerful compact system - Intelligent protection function protects the plasma torch from damage * such as incorrect air pressure, missing wearing parts, overloading of the . pilot arc max. separation cut for carbon steel .. 15.0 mm Optimum cutting thickness carbon steel .. 10.0 mm Stainless steel .. 10.0 mm Aluminum .. 6.0 mm Copper .. 5.0 mm Special equipment included: - 1x ground cable 3 m - 1x hand cutting torch // PT-60/6 with coaxial cable

Condition: good (used), Year of construction: 2012, Worktable: 3,000 x 1,500 mm Table height: 700 mm Load capacity: Max. 600 N/m² Material thickness: 0.5 – 6 mm Speed: Max. 36 m/min Control unit: Flat display, keyboard and mouse Power supply: 3x 400V, 50Hz + 1x 220V, 50Hz (approx. 10 kW) Pneumatics: 6.0 – 8.5 bar (approx. 300 l/min) Dimensions: 4,100 x 2,200 x 1,700 mm Weight: 1,400 kg Redpfx Asxugqvjgzsl The extraction unit is not included in the price. However, upon request, we can provide a suitable extraction system for the machine.

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. CNC plasma cutting machine PCO-3020-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 1450.0 kg - Maximum load: 2000.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems Rjdpforp Dcrox Agzjl THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: used, Year of construction: 2017, functionality: fully functional, controller manufacturer: ECS, controller model: SERIE 900, control type: NC control, TABLE DIMENSIONS: 2500 mm x 1250 mm C.N. E.C.S. series 900 Rodsxc Ibrjpfx Agzsl GENERATOR: CEBORA PLASMA PROF166

Condition: good (used), functionality: fully functional, Thermal-Dynamics plasma and oxy-fuel cutting table, model ULTRA-CUT 300XT CE Technical specifications Rjdexlqx Eepfx Agzsl Working area: 12000 x 3000 mm Overall dimensions: 14000 x 5000 mm Machine weight: approx. 5000 kg Power supply: single-phase 220 V - 3 Amp Torch height control: automatic adjustment Equipped with a CNC controller featuring motion control, I/O, user interface, and an integrated optional plasma height control, all in one package. Runs on Windows 7, 2 GB RAM, 2 USB ports, 120 GB SATA SSD hard drive, etc. Sold with its manual. Retrofit completed in 2021. Selling due to modernization of facilities.

Condition: ready for operation (used), Dimensions: Rjdpfxjxfk Dzo Agzol Width: 180 mm Depth: 460 mm Height: 280 mm Year of manufacture: 2008 Cutting thickness: Quality cut 12 mm – Severance cut 14 mm

Condition: new, cutting range for steel to 35.0 TS mm cutting range for steel to 25.0 QS mm ampere 20 - 65 Ampere cutting medium Druckluft voltage 400 V output Eingang 7.8 KW weight 51.5 kg range L-W-H 595 x 250 x 890 mm Avalon 65 AIR with integrated compressor Cutting - clean and reliable The air plasma cutting system Avalon 65 AIR with integrated Compressor is your reliable partner for the demanding Mission. Make separation cuts up to one with the Avalon 65 Air Material thickness of 18 mm. Characteristics : - IGBT technology - with integrated compressor - Microprocessor control system for excellent and dynamic . Arc properties - CNC interface Rsdpfxoxaaics Agzol - HF-free arc starting system for increased reliability . and low EMF exposure - Manual switch to activate airflow around test air pressure . without having to trigger the burner - Intelligent protection function protects the plasma torch . from damage such as incorrect air pressure, missing wearing parts, . Pilot arc overload. * max. cutting thickness carbon steel =35 mm * optimal cutting thickness carbon steel =25 mm * Stainless steel =25 mm * Aluminum =20mm * Copper =14 mm Special equipment included: - 1x ground cable 3 m - 1x hand cutting torch // PT-60/6 with coaxial cable

Condition: like new (used), Year of construction: 2018, functionality: fully functional, For sale is a Zinser CNC plasma cutting machine with Hypertherm HBR 130 xd power source and accessories. Rodpfjxpwzujx Agzel The system is equipped with an angular head and consists of both a flatbed and a tube processing unit.

Condition: excellent (used), machine/vehicle number: 02 P 0587, cutting circuit: 15 - 40 A electrical connection: 230 V, 16 A kW space needed: 470 x 250 x 250 mm weight: 10 kg Redpfxjdyy Dis Agzjl

Condition: good (used), Year of construction: 2010, Offer 25375 Technical Data: - Working area / cutting length with approx. 5 m rails: approx. 3000 mm - Working area / cutting width: approx. 1500 mm - Controller: BACH - Track gauge: approx. 1900 mm - 1 plasma torch with height adjustment - Plasma source: KJELLBERG Hi FOCUS 160 i - Cutting current at 100% duty cycle: 10 - 160 A Rodpfxsxnivze Agzsl - Cutting range (steel): approx. 5 - 50 mm - Cutting range (aluminium): approx. 5 - 35 mm - Cutting range (stainless steel): approx. 5 - 30 mm - Connection: 400 V / 35 kVA - Extraction table with extraction unit, make: TEKA, type: Filtercube 4 H, year 2010 - Weight: approx. 4 t - Space requirement for system: approx. L 7.5 x H 1.5 x D 2.4 m - Space requirement for extraction unit: approx. L 1.5 x H 3.5 x D 1.5 m

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 22852-P5C3C5, sheet thickness (max.): 80 mm, table height: 750 mm, working width: 2,000 mm, working length: 6,000 mm, TECHNICAL DETAILS Cutting width (X): 2,000 mm Cutting length (Y): 6,000 mm Cutting height (Z): 220 mm Distance between torches: 100 mm Table height: 750 mm Speed & axes Maximum speed: 30 m/min Machine axes: X, Y, Z Rodpfx Aovyif Dsgzol Positioning accuracy: ±0.01 mm Repeatability: ± 0.05 mm Plasma cutting unit Power: 63 kW Operating voltage: 210 V Torch height control: Available Puncture capacity mild steel (argon): 50 mm Puncture capacity mild steel (oxygen): 45 mm Puncture capacity stainless steel/aluminium: 38 mm Cutting capacity mild steel: 80 mm Cutting capacity stainless steel: 75 mm Cutting capacity aluminium: 50 mm MACHINES DETAILS Weight of the machine: 8,150 kg Overall width: 3,300 mm Overall length: 7,350 mm Overall height: 2,560 mm Operating voltage: 415 V

Condition: new, Year of construction: 2024, PLASMA BURNER MODEL MTX 1500/3000 Construction: steel+aluminum Overall dimensions: 3350/2200/1300 Working area: 3100/1520/140 XY axis drive double-sided gate drive: 4Nm stepper motors with gears, gear rails class accuracy 8 Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasm system Collision system to protect the torch from damage Linear guides: TBI Rjdpfsrb Dyzex Agzjl Automatic material detection system Power supply: 240V Permissible load: 1700kg Total weight: 1200kg net INCLUDED: - control panel -water table -replaceable grate -control software in German, English, Polish -Declaration of Conformity CE - DTR It is possible to select the appropriate Hypertherm cutter to meet individual customer needs.

Condition: new, cutting range for steel to 12.0 TS mm cutting range for steel to 8.0 QS mm capacity at 100% 30.0 Ampere cutting medium Druckluft output von 20 - 40 Ampere output Eingang 4.9 KW voltage 230 V Rodpfx Aew U U Tgogzol weight 17,9 kg range L-W-H 480 x 210 x 340 mm The Avalon 40.1 is a light, handy plasma cutting system with high Cutting performance and top cutting quality. Their light weight and simplicity Handling makes them the ideal candidate for crafts, workshops and Industry. Cuts carbon steel, stainless steel, aluminum, copper... Characteristics - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch to activate airflow to test air pressure . without having to trigger the burner. - Powerful compact system - Intelligent protection function protects the plasma torch from damage * such as incorrect air pressure, missing wearing parts, overloading of the . pilot arc max. separation cut for carbon steel .. 12.0 mm Optimum cutting thickness carbon steel .. 8.0 mm Stainless steel .. 8.0 mm Aluminum .. 4.0 mm Copper .. 3.0 mm Special equipment included: - 1x ground cable 3 m - 1x hand cutting torch // PT-60/6 with coaxial cable

Condition: new, welding current 15 - 40 A cutting capacity 1 - 16 mm Rodpfxjupxfhs Agzjl open-circuit voltage 96 V Required air-pressure min. 4 bar connected load 3,6 kW connected load frequency 230 V weight 9,0 kg Dimensions (LxWxH) 371 x 153 x 232 mm Exhibition machine !! Inverter plasma cutter with accessories: Cutting torch with 4 m cable, earthing clamp with 2.5 m cable, air pressure gauge, Mask and brush.

Condition: ready for operation (used), machine/vehicle number: 30116, Arc current at 100% ED: 120 A Voltage: 110V Redoga Tmyjpfx Agzjl electr. Connection for: 380 or 400 V Required space: 1250 x 900 x 1000 mm

Year of construction: 1985, condition: used, machine/vehicle number: 60802 A 17983 J, cutting circuit: bis 400 A space needed: 820 x 1220 x 930 mm Rodpfxo Sdrfo Agzsl weight: 750 kg