Used Plasma Profile Cutting Machine for sale (94,761)

Condition: used, Year of construction: 2018, 2018 plasma cutting machine, in good condition, lightly used. Sold together with metal racks or separately. Equipped with three cutting heads – one plasma and two gas cutting heads. The machine can operate either the plasma head or both gas heads simultaneously (up to 100 mm thickness, using different technologies). For thicker materials, only one gas head can be used due to gas console throughput. Plasma Year of manufacture: 2018 Plasma source: Kjellberg HiFocus 300A Working area (X x Y): 2500 x 13000 mm table (1m safety zone, two 6000mm sheets placed on the table) Minimum/maximum cutting thickness: Mainly used within 20 – 70 mm range, virtually no minimum limit – plasma can cut from 2 mm, maximum with gas is 300 mm. Plasma is intended for quality cutting of mild steel up to 50 mm. Racks Manufacturer: OHRA GmbH (Germany) Bjdpfx Aoww Sy Doaqeww Year of manufacture: 2018 Shelf load capacity: 3T If you have further questions, we will be happy to answer them.

Condition: good (used), Year of construction: 2015, ESAB Combirex DX 3500 Plasma Machine Plasma Unit : ESAB m3 362 Precision 360A Oxygen Plasma Oxy Fuel Station, Automated Oxy-Fuel Torch with GPB Nozzle Capacitive Height Control Track Width : 3500m, Track Length : 8000mm, Cutting Width : 2500, Cutting Length : 6000mm Vision T% Interface, Power Cable, Gas System with Solenold Valves, Laser Point For Plate Location and Alignment, Light Guards Front And Rear. Bwedpfx Aasxqqfijqow

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 07034210 / 00368004644, type of input current: three-phase, working range: 6,100 mm, sheet thickness (max.): 200 mm, sheet thickness steel (max.): 120 mm, sheet thickness aluminum (max.): 25 mm, overall weight: 6,000 kg, input voltage: 125 V, cutting speed: 6,000 mm/min, total width: 4,500 mm, total height: 4,000 mm, total length: 9,000 mm, cutting height (max.): 300 mm, track width: 3,500 mm, table height: 800 mm, repeat accuracy: 1 mm, workpiece weight (max.): 6,000 kg, table length: 6,100 mm, working width: 2,600 mm, compressed air connection: 9 bar, positioning speed: 600 m/min, hose package length: 12,000 mm, table width: 2,600 mm, cutting current: 260 A, positioning accuracy: 1 mm, temperature: 30 °C, working length: 6,100 mm, space requirement length: 9,000 mm, input current: 125 A, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 300 mm, space requirement height: 4,000 mm, space requirement width: 4,000 mm, type of cooling: water, height adjustment type: mechanical, electrical fuse: 125 A, ambient temperature (max.): 40 °C, Equipment: documentation/manual, CNC cutting machine Brand: Air Liquide / Oerlikon Model: Oxytome B25 E Cutting head 1 - plasma source: Hypertherm HPR 260 Cutting head 2 - torch: propane/oxygen with mixing chamber Cutting range: 6100 x 2550 mm Plasma Steel: 3–35 mm thick Stainless steel: 3–25 mm thick Aluminium: 3–20 mm thick Oxy-fuel torch for steel: 25–200 mm Cutting table with zoned extraction Extraction unit not included Year of manufacture: 2008 Second owner since 2017 Machine will be delivered ready to cut Annual maintenance performed by the manufacturer Complete documentation available Currently operated with Radan/Hexagon cutting software Bodpfxoxfqapj Aaqsww Simple parts can be drawn directly on the machine Machine is being replaced due to age/wear and advancements in cutting technologies. Purchase of the separate plasma source (Hypertherm cutting unit) is negotiable. Dismantling not included Extraction system not included Software not included Collection only Machine can be inspected on site by arrangement Price/offers by negotiation Inspection on site is possible.

Condition: used, Year of construction: 2019, CNC portal plasma cutting machine Manufacturer: Microstep Model: MasterCut Compact 4001.20Ptk Year of manufacture: 2019 CNC control Working area: 2 x 4 m Plasma rotator "MasterCut" with fully automatic support for weld seam preparation 1 plasma torch with Kjellberg HiFocus 280i power source Filtration system TEKA Bodpfjxnmbnox Aaqoww 31125

Condition: good (used), Plasma cutting machine, plasma cutter, for plasma cutting system -Manufacturer: Hypertherm -Type: HySpeed HT2000LHF -Equipment: with hose package and cutting nozzle head Bwsdewd Tg Sepfx Aaqjw -Max. cutting current: 200 A -Dimensions: 1100/720/H1040 mm Weight: 459 kg

Condition: good (used), Year of construction: 2012, Worktable: 3,000 x 1,500 mm Table height: 700 mm Load capacity: Max. 600 N/m² Material thickness: 0.5 – 6 mm Speed: Max. 36 m/min Bwsdjxugqvepfx Aaqsw Control unit: Flat display, keyboard and mouse Power supply: 3x 400V, 50Hz + 1x 220V, 50Hz (approx. 10 kW) Pneumatics: 6.0 – 8.5 bar (approx. 300 l/min) Dimensions: 4,100 x 2,200 x 1,700 mm Weight: 1,400 kg The extraction unit is not included in the price. However, upon request, we can provide a suitable extraction system for the machine.

Condition: used, Year of construction: 2007, functionality: fully functional, For sale: CNC plasma cutting machine – designed for the production of flue caps and ventilation components. Condition: Used, in good technical working order, currently connected – viewing and testing on site possible. This equipment is intended for the manufacture of pipes, chimney caps, and ventilation elements from sheet metal and light metals. Technical specifications: - Year of manufacture: 2007 - Cuttable pipe diameter: from Ø60 mm to Ø600 mm - Maximum product length: 1500 mm Bwodpfxsxlp Sqj Aaqow - Sheet thickness (official): 0.5 – 1 mm - Tested capacity: cutting up to 3 mm wall thickness (depending on plasma source and metal type) - Plasma power sources: 2 units – 60A and 80A - Plasma output: 60 A / 80 A (depending on selected source) Features and equipment: - Fully programmable CNC controlled machine - Ability to generate cutting contours based on model or template - Precision automatic positioning and rotation system - Adaptable to different pipe diameters - Integrated plasma cutting control system with adjustable output - Comes with two plasma power sources (60A and 80A) – to suit your production needs Application: - Suitable for the production of ventilation systems, flue caps, ducting, and various tubular structures - Suitable for cutting thin sheet metal (0.5–1 mm) as well as processing thicker walls (up to 3 mm) - Utilization of CNC technology ensures high cutting precision and repeatability, reducing manual labor requirements If you have any further questions, please feel free to contact us.

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. CNC plasma cutting machine PCO-3020-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 1450.0 kg - Maximum load: 2000.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Bwsdpfx Ajrp Dcrsaqow Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 4100 mm Measurements depth 10169 mm Machine weight 5500 kg Control Unit Bsdpfx Aoxllm Doaqeww Brand MicroStep Model IMSNC Main Drive Number of axis 3 This 3-axis MicroStep PLS 7501.25PG plasma cutting machine was manufactured in 2008. It features a robust MicroStep MSNC500 control system and dual cutting capabilities with a HPR 260 AGC plasma and an acetylene gas burner. The machine offers a maximum cutting thickness of 50 mm and operates efficiently within a large working field. If you are looking to get high-quality cutting capabilities, consider the MicroStep PLS 7501.25PG machine we have for sale. Contact us for more information. Application Types Cutting

Condition: like new (used), Year of construction: 2018, functionality: fully functional, For sale is a Zinser CNC plasma cutting machine with Hypertherm HBR 130 xd power source and accessories. Bwsdpsxpwzuefx Aaqow The system is equipped with an angular head and consists of both a flatbed and a tube processing unit.

Condition: used, Year of construction: 2014, CNC portal plasma cutting machine Manufacturer: Microstep Model: MG PrA 16501.25 S1200 (2 bridges) Year of manufacture: 2014 CNC control Working area: 16,500 mm x 2,500 mm + 1,200 mm trench 2 gantries Bodswqg T Sspfx Aaqjww Gantry 1: Plasma rotator with Kjellberg HiFocus 280i neo power source Gantry 2: Oxy-fuel torch, gas type: acetylene The integrated 1,200 mm trench is additionally equipped with a pipe cutting device for pipe diameters 30 mm – 700 mm and a maximum length of 16,500 mm Donaldson DFPRO 16 Cyclopeel filter system for outdoor installation Software for - Nesting, - Bevel cutting, - Pipe processing

Condition: excellent (used), Year of construction: 2013, Plasma cutting machine manufactured by Cloos for processing sheet material and pipes. Program operating hours: 1,687 hours, very low operating hours. Large-format plasma cutting system. Cutting system: Cloos Quirox Plasma source: Hypertherm Program operating hours: 1,687 hours, very low operating hours. Performance data: Cutting capacity (non-alloyed steel): - Burr-free cutting: 32 mm - Piercing (production): 38 mm - Maximum cutting capacity: 64 mm Cutting capacity (alloyed steel): - Piercing (production): 32 mm - Maximum cutting capacity: 50 mm Cutting capacity (aluminium): Bwsdpfxjxn Ihpe Aaqew - Piercing (production): 25 mm - Maximum cutting capacity: 50 mm Including complete extraction unit With guard and enclosure

Condition: excellent (used), Plasma cutter SAF Nerta Zip 20-40 A Type 0408_2240 380 Volt 10/18 A Bodpfxsvdqkvs Aaqoww 220 Volt 16/30 A Cutting current 20/40 A Transport dimension : Length 700 mm width 430 mm height 970 mm Weight 90 kg

Condition: new, Year of construction: 2024, PLASMA BURNER MODEL MTX 1500/3000 Construction: steel+aluminum Overall dimensions: 3350/2200/1300 Working area: 3100/1520/140 XY axis drive double-sided gate drive: 4Nm stepper motors with gears, gear rails class accuracy 8 Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasm system Collision system to protect the torch from damage Linear guides: TBI Automatic material detection system Power supply: 240V Permissible load: 1700kg Total weight: 1200kg net INCLUDED: - control panel Bsdpfx Aasrb Dyzeqoww -water table -replaceable grate -control software in German, English, Polish -Declaration of Conformity CE - DTR It is possible to select the appropriate Hypertherm cutter to meet individual customer needs.

Condition: ready for operation (used), Year of construction: 2008, This GASPARINI Spark 20040 was manufactured in 2008. A robust plasma cutting machine, it features a substantial working area of 4000×2000 mm and can handle sheet metal up to 60 mm thick. With cutting speeds ranging from 0.1 to 30 m/min and a maximum positioning speed of 40 m/min, it's designed for efficiency. Consider the opportunity to buy this GASPARINI Spark 20040 plasma cutting machine. Contact us for more information about this machine. Bsdpfxjxfmn Nj Aaqjww Application Types Cutting

Condition: excellent (used), Year of construction: 2018, operating hours: 60 h, functionality: fully functional, machine/vehicle number: 10236, type of input current: three-phase, working range: 2,500 mm, sheet thickness (max.): 32 mm, overall weight: 850 kg, input voltage: 400 V, working width: 1,250 mm, input frequency: 50 Hz, water tank capacity: 300 l, Equipment: documentation/manual, Plasma Cut 2512 CNC + Hypertherm Powermax 105 + Teka Extraction Unit + Computer with Computer Desk Plasma Cut 512 cutting area 2500*1250mm - 300L water tank - THC torch height control, fully automatic - Laser option with laser pointer - Marking punch for engraving and scribing - Extraction bridge - Gantry raised to 300mm clearance - Includes computer and automatic nesting module for CNC - Includes computer desk - Hypertherm Powermax 105: cuts up to 32mm, severance cut up to 50mm according to the manufacturer - Includes Teka extraction unit with filter Extendable sheet metal rack on rollers for 10 sheets 2500x1500mm Bwjdexnm Riepfx Aaqsw Price: €4,200 excluding VAT Year of manufacture: 2018, first commissioned in April 2019 Very low usage, only used for prototype production (approx. 60 hours total) As-new condition Sales price complete (without sheet metal rack): €19,500 excluding VAT.

Condition: good (used), Year of construction: 2016, Used plasma cutting machines from Soitaab (Italy) Model: Plasmatech 3015 Table dimensions: 3000 x 1500 mm Hypertherm HPR 130 XD plasma source Bwodjwx I Nqspfx Aaqsw Marking pen Torit extraction system Year of manufacture: 2016

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: AC, sheet thickness (max.): 200 mm, overall weight: 7,500 kg, input voltage: 400 V, cutting speed: 300 mm/min, cutting height (max.): 230 mm, table length: 13,975 mm, working width: 2,000 mm, table width: 2,200 mm, positioning accuracy: 0.5 mm, working length: 12,000 mm, 1 plasma & 1 gas (natural) torches 200 Amps Hypertherm HD4070 plasma source 1 owner throughout all service life Good condition, still in operation Set of technical documentation (users + maintenance manuals) Filter unit GTV included Bwodpfjwltwajx Aaqew Nesting program Asper license + PC included Assistance in dismantling, packing, loading (to be negotiated separately) Organizing of transportation to countries of the European Union (at separate quotation)

Condition: used, Plasma cutting unit Harris Type Plasma Cutting H 35 A Machine No. Year of manufacture approx. 1994 Output 35 Amp. Cutting capacity approx. 4 mm Torch package length approx. 7 meters Bodpfx Aaexciumjqoww Compressed air connection approx. 6 bar - with pressure reducer Power supply 380 Volt, 50 Hz Space requirement (L x W x H): 550 x 400 x 960 mm Weight approx. 50 kg Good condition

Condition: ready for operation (used), Dimensions: Width: 180 mm Depth: 460 mm Height: 280 mm Bwedpfexfk Dzex Aaqjw Year of manufacture: 2008 Cutting thickness: Quality cut 12 mm – Severance cut 14 mm

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 5125 mm Measurements height 2100 mm Bwsdjxfwwbopfx Aaqsw Control Unit Brand ESAB Model EPP-360 Vis 51 Main Drive Spindle speed range 50.8–25000 mm/min Number of axis 3 This 3-axis ESAB Combirex DX 4000 plasma cutting machine was manufactured in 2012. It features the ESAB WELDING & CUTTING Vission 51 control and a Precision Plasmarc 368 plasma source. Capable of cutting up to 40 mm with plasma and 300 mm with gas, it offers a cutting area of 3000 × 13000 mm. Consider the opportunity to buy this ESAB Combirex DX 4000 plasma cutting machine. Contact us for more information. Application Types Cutting

Condition: new, Year of construction: 2024, CNC plasma cutting machine PCO-3015-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1520 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2280 mm - Height: 1500 mm - Total mass: 1100.0 kg - Maximum load: 1800.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets Bedpfx Ajh E Izieaqeww The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: good (used), Year of construction: 2019, functionality: fully functional, sheet thickness (max.): 30 mm, table length: 6,000 mm, table width: 2,000 mm, - Includes Katana control system - Kjellberg Hi Focus 161i neo plasma source with automatic gas mixing console - Machine table size: 6,000 x 2,000 mm - Marking and cutting of structural steel up to 30 mm (also suitable to a limited extent for aluminium and stainless steel) - Includes nesting software Sigmanest (dongle version with no ongoing costs) - Includes accessories (see pictures) - Includes extraction system (see pictures) The machine has been regularly maintained and seldom used (approx. max. 8 – 15 hours per week). The plasma cutting system is still in operation and can be inspected and tested on site by prior appointment. We are happy to recommend a specialist company to assist you with dismantling and relocating the machine if required. Original purchase price WITHOUT accessories: €140,000 plus VAT. Bedpfxsxl Ayzj Aaqoww Subject to change and error. Sale exclusively to businesses, with VAT shown separately. No warranty or guarantee. Immediately available. No dismantling or delivery – collection ex works only!

Condition: used, Year of construction: 2017, functionality: fully functional, controller manufacturer: ECS, controller model: SERIE 900, control type: NC control, TABLE DIMENSIONS: 2500 mm x 1250 mm C.N. E.C.S. series 900 Bwsdpfxsxc Ibro Aaqsw GENERATOR: CEBORA PLASMA PROF166

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 2100 mm Measurements depth 7000 mm Measurements height 1155 mm Control Unit Brand SIEMENS Max Material Thickness Stainless steel 6 mm Aluminium 6 mm Additional Equipment Plasma Source: HYPERTHERM POWERMAX 1000 This SPIRO 6000V4 plasma cutting machine was manufactured in 2016. It features a large work table of 6000 x 1500 mm and can handle materials up to 6 mm thick, including steel and aluminum. Equipped with a SIEMENS controller and HYPERTHERM POWERMAX 1000 plasma source, it supports DXF file import/export. Ideal for medium to large industrial settings. Contact us for more information about this machine. Bwjdpfxoxd Ic Eo Aaqew Application Types Cutting