Used Plastic Plate for sale (16,569)

Year of construction: 2012, condition: used, Lot consists of: (1) Twin-Screw Extruder Technical Details: screw diameter 75 mm, Capacity: max 200 kg/h, KraussMaffei-Berstorff control system, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration Table Technical Details: with three (3) SPECK pump systems, table length approx. 4 m (1) Haul-Off Unit Technical Details: speed 0.1 - 11 m/min, pulling force 25,000 N, contact length 1,500 mm, profile clearance WxH 300 x 180 mm (1) Tipping Table Kdjdpfxoyknp Tj Ab Toh Technical Details: slide into adjacent profile, single-strand roller shutter, table length approx. 6,000 mm

Condition: used, Hydraulic guillotine shear Make: LOTZE, Model: KSHY 20 Year of manufacture: 1970 Technical Data Manufacturer: LOTZE Model: KSHY 20 Year: 1970 Usable length: 2040 mm Sheet thickness: 5 mm Dimensions (L x W x H): L 2.5 x W 1.70 (plus support arms) x H 1.5 m Weight: 4 t Equipment • Angle stop • Support arms • Manual rear gauge 400 mm All details without guarantee. A demonstration is possible at any time in our showroom. Kedpfx Aowtyqiob Todh

Condition: used, functionality: fully functional, Year of construction: 2017, control type: NC control, Motorized Guillotine Shear Manufacturer: Knuth Model: KMT 2500 x 4.0 mm Year of manufacture: 2017 Technical Data Brand: Knuth Model: KMT Kdedsw Naghopfx Ab Teh Year: 2017 Working length: 2550 mm Sheet thickness: 4.0 mm (450N/mm²) Cutting angle: 1.5° Strokes/min: 42 Motor power: 7.5 kW Weight: 3.2 t Dimensions: L 3.10 x W 1.70 x H 1.30 m Equipment • Support arms • Motorized backgauge 600 mm • Pneumatic sheet supports • NC control • Cutting line illumination • Foot switch All information subject to change and without guarantee. A demonstration is possible at any time in our showroom.

Condition: new, Year of construction: 2026, Cutting length 4200 mm Cutting height 2200 mm Kdedsyk Ibvjpfx Ab Tsh Motor output 3 kW

Condition: used, Year of construction: 1994, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm throat 310 mm Ksdpfxet Tqkde Ab Tjdh stroke 300 mm table width 820 mm table height over floor 1215 mm Number of downholders 12 St. cutting angle 0,5 - 2,5 ° cutting angle adjustment 1- 2,5 ° back stop - adjustable 0- 1000 mm total power requirement 30 kW weight of the machine ca. 19 t dimensions of the machine ca. 3,8 x 2,65 x 2,85 m Machine was overhauled in 2010 and was modernized with light barrier at table. Machine has an automatic back stop with DRO. Cutting angel is adjusted by motor. Cutting gap is manually adjusted by adjustment of table. Along with the machine we supply a loading/unloading table.

Condition: good (used), This filling machine was filling 3 litre tubs of honey. It can be supplied at extra cost with two GlobeTech tub lidding machines which worked in line with it. Kdsdpfopfdhpsx Ab Tjh

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, Satrind 8/25 Twin Shaft Shredder, 18KW Motor (brand new) 30 x 50 mm 1 pick blades. Cutting Chamber 758mm x 700mm machine built onto stand with hydraulic ram that can be operated independently of control panel by a remote control. The machine has been completely refurbished with new blades, resharpened new bearings, seals & safety switches fitted & can be seen working. Kodpfx Abowxfggs Tsdh Ideal for plastic drums, crates, bins. For price contact seller for more information & a video of the machine operating if required.

Condition: good (used), Clamping plate, welding table, welding table, straightening plate -Mounting plate: steel , with a vice -Width: 1500 mm -Length: 2005 mm -Height: 845 mm -Plate thickness: 45 mm -Plate: is on steel frame -Vise: clamping jaws 110 x 15 mm -Transport dimensions: 1525/2230/H990 mm -Weight: 1250 kg Kedpfsft Tcisx Ab Tjdh

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Amada Hydraulic Guillotine Shear Type GX II 630 Working width: 3050 mm Max. sheet thickness: 6.35 mm Robust CNC electro-hydraulic guillotine shear AMADA CNC touch control, located front left ("GP 37W2") Machine control system including information display Main display with 4 operating panels Control/operation of all machine functions Up to 50 cutting programs, each with up to 15 sequences CNC electromechanical backgauge Travel speed: 100 mm/sec Kdodpfxsxwmycs Ab Tsh CNC electro-hydraulic cutting angle adjustment CNC electro-hydraulic blade gap adjustment Sight device & cutting line illumination for viewing the scribe line Shearing according to optical scribe mark Manually adjustable table support plates including ball rollers Grip recesses in the front support table 2x movable foot switches Operating manual and circuit diagrams included

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, Haco hydraulic guillotine shear type TS 406 working width 4050 mm maximum sheet thickness 6 mm Kdjdpfsxwmv Dsx Ab Tsh motorised back gauge cutting gap adjustment cutting angle adjustment

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, Darley hydraulic guillotine shear type GS 3116 working width 3050 mm max sheet thickness 16 mm Delem NC control type DAC 350 motorized backgauge automatic angle adjustment automatic cutting gap adjustment rear side equipped with transport conveyor Kdsdpoxpuipefx Ab Tjh

Condition: used, stroke rate (max.): 28 1/min, sheet thickness (max.): 4 mm, Hydraulic Guillotine Shear Make: HERA Model: HSS 3 2500x4 Year: 1981 Technical Specifications Manufacturer: Hera Model: HSS 3 Working Length: 2500 mm Ksdpfx Abewvi Ebj Tjdh Capacity: 4 mm Passage: 2600 mm Throat Depth: 200 mm Strokes: 28 min⁻¹ Motor Power: 5.5 kW Dimensions: approx. L 3.10 x W 2.00 (plus support arms) x H 1.40 m Weight: approx. 4 t Equipment • Motorized back gauge with digital display 1000 mm • Angle gauge 1000 mm • 2 support arms • Central blade gap adjustment • 1 spare blade Details provided without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: new, Year of construction: 2019, sheet width 2050 mm plate thickness 2 mm strokes per minute until 38 cutting angle 1,75 ° table height over floor 870 mm total power requirement 3 kW weight of the machine ca. 1520 kg range L-W-H 2,2 x 0,6 x 1,2 m Demo machine at a special price: The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a standard geared brake motor via a chain connection to the main axle. the knives are of the highest quality. The optimal cutting angle secures the together with the sheet holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • Kdodpevn Al Hofx Ab Tsh cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille. Plus freight + packaging 270,--. We also have a Kapema manual swing bending machine, model KFS 20/20, with a segmented top rail for bending box sections. Please send us your inquiry if you are interested. This is a demonstration machine at a special price, so we are selling it without any warranty. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².

Condition: new, sheet width 1290 mm plate thickness 5 mm pre-bending ja roll diameter 120 mm roll speed 1 - 6 m/min total power requirement 1,1 kW weight of the machine ca. 825 kg Asymmetry roll arrangement, pre-bending ist possible. This new machine is in the following sizes obtainable: working length from 1040 until 2540 mm, max. plate thickness ( 400 N/mm² ) from 1 until 6,5 mm. Kdedpfevzhgpsx Ab Toh We are distributor only for Germany. Machine dealer with own stock of 1600 m².

Condition: used, length 1200 mm Kdsdetq I Rqopfx Ab Tsh width 500 mm floor-plate height 105 mm weight of the machine ca. 400 kg Electric magnetic plate from WAGNER, a transformer is required for operation / Rectifier required. 110 volts, 2.86 amps. Reduced special price. Machine dealer with own stock of 1600 m².

Condition: new, sheet width 2050 mm plate thickness 3 mm strokes per minute until 35 cutting angle 2,0 ° table height over floor 870 mm thickness at "Niro-steel" 2 mm total power requirement 4 kW weight of the machine ca. 1550 kg range L-W-H 2,5 x 1,57 x 1,21 m The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. Ksdpfx Abovdfmxj Tedh • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille, warranty = 12 months for single-shift operation. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².

Condition: new, Universal panel transport assistant Ideal, space-saving aid for edge banding machines, panel saws, and all other processing machines where the workpiece needs to be moved. Height-adjustable panel transport assistant Working height infinitely adjustable from approx. 900 mm to approx. 1,200 mm Special polygonal body with anti-slip coating for optimal grip in any position 5 heavy-duty swivel castors with high-quality locking mechanism for stable standing Automatically moves along edge banding machines and panel saws Weight: approx. 8 kg Availability: in stock Storage location: Hochheim Kedpfx Abew I Uz Rj Tjdh

Condition: excellent (used), Face plate and clamping disk (2858) Diameter 440 mm Kjdpstup Trjfx Ab Todh Camlock mounting 133.4 Cone diameter 106.39 Height of face plate 50 mm Weight 28 kg

Condition: excellent (used), Professional granulator from the German brand Dreher – model S 26/26 GFS-SPEZIAL. This unit is designed for shredding plastics from injection molding or extrusion processes. Robust construction, proven VEM 7.5 kW motor, three-phase 400 V power supply. The machine features a large feed hopper, convenient service access, and an electrical control cabinet with emergency stop button. The installed low-speed three-phase motor ensures high shredding power with stable operation. • Motor power: 7.5 kW • Power supply: 400 V 50 Hz • Speed: 1500 rpm • Throughput suitable for medium and large injection moulding machines • German manufacturing quality • Sturdy frame and knife assembly Kdedpovyumyofx Ab Tjh Very good condition, mechanically inspected, ready for operation.

Condition: used, Year of construction: 2008, total length: 4,500 mm, total width: 1,700 mm, total height: 1,200 mm, Empty weight: 7.000 kg - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 20830013 - Drive system: Teach-in - Number of rolls [pcs.]: 3 - Power [kW]: 11.0 Kdjdpfexdigfjx Ab Tsh - Max. sheet thickness [mm]: 16 - Max. working width [mm]: 2000 - Transport dimensions: 4500mm x 1700mm x 1200mm (l x w x h) - Transport weight [kg]: 7000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Eos EOSINT plastic laser-sintering system Here we offer an Eos EOSINT plastic laser-sintering system. Eos EOSINT Plastic Laser-Sintering-System P385 The EOS P385 system includes the following Installation space container Powder container Cooler: Termo TEK Termochiller 1100 Ksdpef Ey Eajfx Ab Todh The following upgrade has already been performed : Software: CD's Eosint P3 process software PSW 3.2 for Windows 2000, XP Materialice: Magics RP 9.0 Machine upgrade from P360 to P385 on 10.08.2007 Laser change 15.05.2008 X Drive Motor. Change of used engine 04.05.2020 Pyrometer change 30.06.2020 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V A, frequency 50 Hz Connected load 8 kW Fuse 32 A MAX. Laser power 100 W Laser class open 4 Laser class Closed 1 Weight 850 kg Type: EOSINT Upgrade P385 condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: excellent (used), Year of construction: 2003, overall weight: 8,200 kg, total height: 450 mm, total length: 5,370 mm, total width: 2,100 mm, plate height: 450 mm, plate width: 2,100 mm, groove spacing: 300 mm, Floorplate Length: 5370mm Floorplate Width: 2100mm Height: 450mm No. Of T-slots: 7 Distance from T to T-slot / Jump:300mm T -slot size: 41mm Weight a plate approx.: 8200kg Number of matching pieces: 1 Length: 5370mm Width: 2100mm Height: 450mm Weight: 8200kg Kdsdpfx Abeyg Igds Tjh Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), overall weight: 6,000 kg, total height: 400 mm, total length: 4,510 mm, total width: 1,815 mm, plate height: 400 mm, plate width: 1,815 mm, Floorplate Length: 4510mm Floorplate Width: 1815mm Height: 400mm No. Of T-slots: 6 Distance from T to T-slot / Jump:285mm T -slot size: 36mm Weight a plate approx.: 6000kg Number of matching pieces: 1 Length: 4510mm Kodpfx Aeyg Icrjb Tedh Width: 1815mm Height: 400mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2005, overall weight: 6,000 kg, total height: 310 mm, total length: 3,985 mm, total width: 2,010 mm, Floorplate Length: 3985mm Floorplate Width: 2010mm Height: 310mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Weight a plate approx.: 6000kg Number of matching pieces: 2 Length: 3985mm Width: 2010mm Kjdpsyg Hx Esfx Ab Tsdh Height: 310mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1990, total height: 350 mm, total length: 5,100 mm, total width: 1,500 mm, T slotted bed plate STOLLE - Cast iron Floorplate Length: 5100mm Floorplate Width: 1500mm Ksdpfx Abjxdwwfj Tedh Height: 350mm No. Of T-slots: 5 Distance from T to T-slot / Jump:300mm T -slot size: 28mm Weight a plate approx.: 5800kg Number of matching pieces: 1 Length: 5100mm Width: 1500mm Height: 350mm