Used Plastic Plate for sale (17,247)

Condition: excellent (used), overall weight: 14,000 kg, total height: 455 mm, total length: 5,500 mm, total width: 2,420 mm, T slotted bed plate STOLLE - DT-4/2 T slotted cast iron floorplate 4000 x 2420 x 455 mm Floorplate Length: 5500mm Floorplate Width: 2420mm Height: 455mm No. Of T-slots: 6 Distance from T to T-slot / Jump:400mm Isdszc Ibmopfx Abvoic T -slot size: 42mm Weight a plate approx.: 14000kg Number of matching pieces: 2 Length: 5500mm Width: 2420mm Height: 455mm Weight: 14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2008, sheet width 2050 mm plate thickness 20.0 mm ST pre-bending 16.0 mm ST diameter of upper rolls ca. 270 mm side roll diameter ca. 240 mm diameter of lower rolls ca. 250 mm Number of working hours ca. 7.800 h Control "EASY PRO" oil volume ca. 200 Liter voltage 380 V total power requirement 13.5 kW weight ca. 9.000 kg Dimensions (only the machine) 4000 x 2080 x 1800 mm Good condition (!!) Current list price approx. 150.000 euros Special price available upon request Features: - Robust electro-hydraulic 4-roll round bending machine * Arc-shaped feed of the side rollers (swing arm technology) - 4-roller design offers a wide range of bending and rounding options Iisdpozc Rv Tefx Abvoc * Rolling process completed in a single pass - Mobile control unit * DAVI "DAVI EASY PRO" numerical control * Manual or automatic operation selectable * Programming "Self-Learning" mode available * Control of all rollers and machine axes * Digital position display for the rollers - Curved feed of the side rollers (DAVI "PSG" guide system) * Tight bending radii of up to 1.1 times the upper roller diameter possible * Instead of the usual 1.5 times with linear guides * Optimal bending = short sheet ends during bending - Conical rolling possible via roller tilt * Tight diameters possible due to low machine frame - Electronic roller parallelism - Stepless speed adjustment (max. 5.0 m/min) - Bending on both sides - Forged and hardened rollers with a hardness of 53-55 HRC - Low-maintenance, robust machine design - Easy sheet removal thanks to low machine frame - Sturdy welded steel construction - Electro-hydraulic swivel bearing for easy tube removal - Operating instructions

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1997, sheet thickness steel (max.): 16 mm, cutting length (max.): 4,000 mm, HYDRAULIC SHEAR LVD MVSB 40/16 Serial number 24159 Yom 1997 TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 4050 mm Iedpfx Aouipu Eebvsic Distance between uprights 4250 mm Range back gauge 1000mm Min. cutting angle 0.5 ° Max. cutting angle 2.0 ° Min. number of strokes/min. 7 Max. number of strokes/min 26 Min. blade clearance 0.5 mm Max. blade clearance 1.6 mm Motor power 22 kW Approx weight 20500 Kg LxWxH 4800x2170x2750mm Accessories included; Electrical adjustment of back gauge 1000mm with Go-to controller blade clearance and cutting angle adjustable. 1 x Front support 1500mm, one with 90° square arm front support 1 x Front support of 1500mm Foot pedal

Condition: good (used), Year of construction: 2004, overall weight: 21 kg, T slotted bed plate BWF - RK-4 MACH-ID 8883 Make: BWF Type: RK-4 Year: 2004 Length:275mm Width:180mm Height:115mm Iedpjzcu I Tjfx Abvsic Weight:21kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2015, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm work height max. 930 mm no. of strokes 9 - 17 Hub/min cutting angle 0.5 - 3.0 ° down holder 18 Stück Control SC 90 engine output 22.0 kW weight of the machine ca. 9500 kg range L-W-H 4270 x 2200 x 2250 mm Good / well-maintained condition (!!) Current list price approx. 80.000 euros Features: - Electro-hydraulic / slide-guided guillotine shear - HACO CNC control model "SC 90" * Preset positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * LCD display * Emergency stop switch - NC electro-motorized backgauge, on ball screws - Hydraulic hold-down devices - Front finger guard - Ball bearings in the support table * Support table with recessed handles - 1x side stop, with mm scale - 1x front support arms - 1x freely movable foot switch - Rear safety guard (no light barrier) - Operating instructions in German (PDF) Iiodpfx Aozczgcobvjc

Condition: used, Year of construction: 2006, functionality: fully functional, 1.0 unit – Granulator for shredding plastics Iedpfx Abox H Aihovoic Manufacturer: WITTMANN Type: M2 Year of manufacture: 2006 Infeed opening: 300 x 400 mm Rotor diameter: 250 mm

Condition: excellent (used), Year of construction: 1996, overall weight: 4,200 kg, total height: 350 mm, total length: 3,500 mm, total width: 1,750 mm, plate height: 350 mm, plate width: 1,750 mm, groove spacing: 250 mm, T slotted bed plate STOLLE - DT MACH-ID 9373 Make: STOLLE Type: DT Year: 1996 T slotted bed plate STOLLE - DT Iiedpfx Abszcn Iysvoc MACH-ID 9373 Make: STOLLE Type: DT Year: 1996 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2000, control type: NC control, actuation type: hydraulic, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), 4 roll plate bender Davi Promau - MCB 3037 MACH-ID 9613 Make: Davi Promau Ijdpezcnuyjfx Abveic Type: MCB 3037 Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Width: 2200mm Height: 2300mm Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used SCHRÖDER motorized guillotine shear, type MHSU, built in 1994, No. 121204 Usable length: 1030 mm Max. sheet thickness: 2.5 mm - Pneumatic hold-down device - Front support arms 1000 mm - Digital back gauge 750 mm - Right-angle stop - Sheet support device - Forward sheet slide - Rear area protection with protective cage Ijdpfov Tzphsx Abvoic - Foot switch The machine is in stock at our location in 71334 Waiblingen-Beinstein and is available immediately.

Condition: good (used), Year of construction: 2010, sheet width 4100 mm plate thickness 6.35 mm Ijdpfx Abjzcqy Sovsic thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 9 - 26 Hub/min back stop - adjustable 10.0 - 750 mm down holder 22 Stk. oil volume 200 ltr. engine output 7.5 kW weight 8000 kg. range L-W-H 5145 x 2200 x 1750 mm From a maintenance workshop Very well-maintained / good condition With very few operating hours (!!) Current list price approx. 60.000 euros Special price upon request Features: - Robust electro-hydraulic, slide-guided sheet metal shear - LVD control panel centrally located on the front of the machine (left) - Electro-hydraulic cutting angle adjustment * Includes digital display of actual values - Manual cutting gap adjustment * via handwheel from the front (left) * Includes analog value display - Electro-motorized backgauge with ball screws * Includes digital actual position display * Rapid traverse is possible - 1x extra-long side stop 3,000 mm, with support foot - 1x long support arm - Ball-bearing recessed handles in the support table - Front finger guard - Rear sheet metal chute - Safety device - rear (protective grille) - 1x freely movable foot switch - Machine lighting at the front (custom-built) - Operating instructions

Condition: good (used), Fromm plastic band strapping line with press , 18 mm band fully automatic Iodozc Ic Rspfx Abveic

Condition: good (used), 2 used T-slot angle plates Isdpfx Aboy Iakfjvjic Height: 1500 mm Width: 1000 mm Depth: 500 mm 10 transverse slots 3 longitudinal slots First-class surface finish

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, roller (top) diameter: 130 mm, side roll diameter: 110 mm, working width: 1,030 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 2.2 kW (2.99 HP), number of digital displays: 3, Equipment: emergency stop, foot remote control, 4-Roll Round Bending Machine Manufacturer: Sahinler, Type: 4RM 10-130 HRC Year of Manufacture: 2008 Technical Data Manufacturer: Sahinler Type: 4RM 10-130 HRC Year of Manufacture: 2008 Usable Length: 1030 mm Top Roll Diameter: 130 mm Side Roll Diameter: 110 mm Sheet Thickness (without pre-bending): 6 mm Iedpfxozcpu Ue Abveic Sheet Thickness (with pre-bending): 5 mm Total Power: 2.2 kW Dimensions: 2.4 x 1 x 1 m Weight: approx. 1.5 t Equipment • Hardened rolls • Digital display for roll positioning All information without guarantee.

Condition: good (used), functionality: fully functional, Year of construction: 2016, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 180 mm, side roll diameter: 160 mm, roller diameter: 180 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 600 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, total length: 4,000 mm, total width: 1,100 mm, total height: 1,300 mm, power: 5.52 kW (7.51 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Plate bending roll 2000 X 8/6 mm year 2016 PYRAMID LINEAR GUIDEWAYS DUAL PRE-PINCH 3-ROLL Bending capacity -Plate width 2000 mm -Rolling plate thickness 8 mm -Prebend thickness: 6 mm Rolls dimensions: Useful length 2050 mm top roll D 180 mm side rolls D 160 mm Configuration of the machine Rolls hardened induction treatment, high strength surface of the 3 rolls Power driven total on the 3 rolls Conical bending hydraulic attachment Re-rolling system welded shells rounding. Opening hydraulic front drop-end Extended shafts front side for use as profile bender. Electric 3 phase 400/50 Vac, power 7,5 Hp. Iodpfszff Uuex Abvjic Digital position readouts of the bending rolls.

Condition: used, length 450 mm width 140 mm height 100 mm 2 magnetic plates with control unit Iedszcghrjpfx Abvsic approx. 450 x 140 x 100 mm

Condition: used, length 900 mm width 505 mm height 110 mm weight 310 kg The electro-magnetic clamping plate is in good, ready-to-use Iiedpfxszcgkye Abvjc condition. Length: 900mm Width: 505mm Height: 110mm Weight: 310kg We have two identical magnetic chucks with the same dimensions. See S9061

Condition: used, length / mm Iedpfxjzcgiij Abveic width / mm

Condition: good (used), functionality: fully functional, Year of construction: 1999, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller model: 4 axis digital readout, number of rollers: 4, roller (bottom) diameter: 350 mm, roller (top) diameter: 370 mm, roller diameter: 370 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 1,900 mm, sheet thickness (max.): 40 mm, overall weight: 15,000 kg, total length: 5,300 mm, total width: 2,100 mm, total height: 2,400 mm, power: 25 kW (33.99 HP), input voltage: 380 V, number of digital displays: 4, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4 roll plate bending machine Faccin model hydraulic 4HEL2,5 30/25 year of make 1999 Linear guideways rolls motion plate width 2500 mm plate thickness 30 mm rolling capacity 2500 x 30 mm Ijdpfx Ajzd Sw Tjbvsic prebend 2500 x 25 mm top roll size 370 m lower roll size 350 mm surface on the rolls 2550 mm voltage 380/50 power installed 25KW configuration installed Hardened surface of the 4 rolls conical plate bending hydraulic open drop-end digital position readout of the rolls. NC programmable 4 axis Control panel electric

Condition: used, Year of construction: 2019, 1 unit of SHERPA PPS disc brake testing stand with digital LED display unit SHERPA AZE-020-ECO-D, self-disassembly feature Color: as shown in the pictures, according to the images and inspection Ijdpfx Abezcmfdjveic Year of manufacture: 2019 Condition: used Location of the goods: Hall 2 Payment method: prepayment by bank transfer Shipping: self-collection only from the Hofgeismar location

Condition: good (used), Top of the range plate washing system for high throughput. Has come from Wembley Football Stadium where it was washing plates for the hospitality areas. Lovely condition and with options Iedpfx Ajvd Eiyebveic

Condition: used, Plate trolley as a welded construction made of steel used one-sided loading area made of plywood 5° incline Side bar height: 915 mm Trolley powder-coated RAL 5010 gentian blue permanent or surface-protected impact and scratch-resistant tires made of thermoplastic rubber on plastic rims with precision deep groove ball bearings, gray, "no marks" thread and foot protection 2 swivel castors with wheel locks and 2 fixed castors Isdpfewkbayox Abvoic 1500 x 370 Wheel diameter (mm)200 x 40 Load capacity (kg)500 Weight (kg)47.5 Dimensions (WxDxH, mm)1500 x 680 x 1200 Availability: short term Storage location: Flörsheim

Condition: new, Universal panel transport assistant Iodpfx Absw I Uz Revoic Ideal, space-saving aid for edge banding machines, panel saws, and all other processing machines where the workpiece needs to be moved. Height-adjustable panel transport assistant Working height infinitely adjustable from approx. 900 mm to approx. 1,200 mm Special polygonal body with anti-slip coating for optimal grip in any position 5 heavy-duty swivel castors with high-quality locking mechanism for stable standing Automatically moves along edge banding machines and panel saws Weight: approx. 8 kg Availability: in stock Storage location: Hochheim

Condition: used, Technical details: floor-plate length: 4000 mm plate width: 1500 mm plate height: 250 mm weight of the machine ca.: 4,6 t Iiedpfxjzcwr Ie Abvjc space requirements of the machine approx.: 4,0 x 1,5 x 0,25 m *

Condition: used, Year of construction: 2008, total length: 4,500 mm, total width: 1,700 mm, total height: 1,200 mm, Empty weight: 7.000 kg - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 20830013 - Drive system: Teach-in - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 2 - Power [kW]: 11.0 - Max. sheet thickness [mm]: 16 Iiedpsxdigfofx Abvec - Max. working width [mm]: 2000 - Transport dimensions: 4500mm x 1700mm x 1200mm (l x w x h) - Transport weight [kg]: 7000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, GEA WTT GBS 700M-U-86 Plate Heat Exchanger New, unused plate heat exchanger from stock. Suitable for industrial refrigeration, heat transfer, and process applications. Manufacturer: GEA WTT GmbH Type: GBS 700M-U-86 Part Number: 12509184 Serial Number: 10-120106888-0001 Design: Brazed plate heat exchanger Number of plates: 86 Version: G1, G2, G3, G4 Temperature range: -200 °C to +200 °C Max. operating pressure side 1: 30 bar Max. operating pressure side 2: 30 bar Isdpfx Aezb Nviebvoic Volume side 1: 9.66 l Volume side 2: 9.89 l Volume side 3: 0.00 l Refrigerant: All refrigerants except ammonia Country of manufacture: Germany Condition: NOS (New Old Stock) Location: Kusel