Used Plastic Window for sale (17,209)

Condition: excellent (used), Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: ADKL2001, clamping force: 14,000 kN, screw diameter: 120 mm, clearance between the columns: 1,450 mm, column diameter: 240 mm, displacement volume: 7,351 cm³, injection pressure: 1,200 bar, injection weight: 6,983 g, mold height (min.): 650 mm, ejector force: 350,000 N, ejector stroke: 380 mm, opening stroke: 1,450 mm, plate length: 2,950 mm, plate width: 2,000 mm, plate height: 2,000 mm, total length: 14,100 mm, total width: 3,400 mm, total height: 3,600 mm, overall weight: 75,000 kg, heating capacity: 60 kW (81.58 HP), pressure: 178 bar, number of injections: 1, pump power: 204,000 W, power: 266 kW (361.66 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 520 A, Equipment: documentation/manual, The machine has seen limited use and is in very good condition. It has been well maintained. The machine only processes ABS and PP. It features a Beckhoff control system. The machine is equipped with extensive additional equipment, including 3 pneumatic valves, two hydraulic valves, a servo valve for table movement hydraulics, 32 tool heating zones, a water manifold with 8 zones, a screw heating element insulation, a hydraulic screw rotation system for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a Euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. Additionally, water blocks are installed on both the moving and stationary tables, each with 8 connections. Furthermore, a set of spare parts is included, such as a complete torpedo, a screw nozzle, heaters, temperature probes, and specific hydraulic seals, as well as a self-filtration filter and a torpedo wrench, and auxiliary ejector rods. A Wemo robot can also be sold with the machine; while it is not the subject of this advertisement, it can be purchased separately and added to the machine. It was used with the machine and is adapted for it. Hedpfszna T Rsx Aftofn

Year of construction: 2022, operating hours: 2,000 h, condition: like new (used), functionality: fully functional, We offer this like-new Ulmatec filter unit, model FES 20-35-4, for dry dust extraction of aluminum/plastic, manufactured in 2022. Manufacturer: Ulmatec Model: Filter unit FES 20-35-4 Year of manufacture: 2022 Condition: like new Hedpfxszlr Dcj Aftofn Type: Dry dust extraction for aluminum/plastic Category No.: 376 If you have any questions or require further information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, twin-screw extruder, output rate of 300 to 500 kg per hour, for PE Hfjdpfx Aezkk Nbeften 110 kW motor

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 075440, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,500 mm, measuring range Z-axis: 1,000 mm, The machine was overhauled in 2022! TECHNICAL DETAILS Measuring range, X-axis: 1,200 mm Measuring range, Y-axis: 2,500 mm Measuring range, Z-axis: 1,000 mm Accuracy MPE E: 2.6 + L/300 µm Hfedez Izdzepfx Afton MACHINE DETAILS Machine height with extended damper: 3,485 mm Machine height without extended damper: 3,470 mm EQUIPMENT CNC control WPC, 3 axes Probing system Renishaw PH10M Scanning probe Renishaw SP25 Scanning kit 2 Probe stylus lengths: 50–100 mm Probe changing rack Renishaw FCR25 Number of probe changing slots: 3 Probe changing rack: not populated Ergonomic handheld control panel HT400 PC system with Windows 10 Professional TFT monitors: 2 × 24 inches WM QUARTIS CNC control geometry software, Version 2025 WM QUARTIS CNC free-form surface applications, Version 2025 WM QUARTIS CNC CAD import interface STEP, Version 2025 USB user dongle with software license Small probe stylus kit M3 Reference sphere PC and controller trolley with desk combination

Condition: used, Year of construction: 2012, Assembly of : Hedpfxsz A D E Dj Aftsfn 3x 4 head welding Soenen Q4 machines on 1 chassis 2 head automatic cleaning machine Soenen BFP Duplex Robot Soenen MOS for automatic hinges automatic transfer table

Condition: used, functionality: fully functional, conveyor belt length: 6,500 mm, conveyor belt width: 1,190 mm, total length: 6,500 mm, total width: 1,950 mm, total height: 450 mm, power: 0.75 kW (1.02 HP), Equipment: type plate available, Plastic modular belts/belt conveyors Condition: Used Year of manufacture: 2016/2017 Overall length: approx. 6500 mm Overall width incl. motor/feet: approx. 1950 mm Overall width without motor: approx. 1320 mm Conveyor width: approx. 1190 mm Conveyor height (height-adjustable): approx. 410 to 450 mm Material: Steel/Plastic Belt type: Plastic Color: Light gray/Dark gray Including SEW motor (0.75 KW) with Movimot (speed adjustable) Including feet (height-adjustable) Stock quantity: 3 units Price per unit Internal article number: 2026021103 The conveyor system was in operation until it was dismantled. Thanks to the excellent workmanship of the conveyor system, your material glides gently to its destination, even under high load. Tailor-made solutions for your intralogistics Hjdpfx Aozfkm Aoftefn For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We will gladly create a customized offer for you or advise you on design or assembly issues. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, pharmaceuticals, crafts, or the electronics industry. Together, we will develop solutions to optimize your processes and material flow in a cost-effective and sustainable way. We can also offer you fully automatic sorting technology or complementary components such as picking shelves or containers. Features: Condition: fully functional, with signs of use Ideal for fast material transport Professionally disassembled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst)

Condition: used, The machine is for sale together with all tools as shown in the pictures. Hsdjy Rumtopfx Aftjfn

Condition: excellent (used), Catalog number 7382 TECHNICAL DATA Mortising carriage: - Electric feed with stepless speed control - Carriage adjustable in angle - Feed motor 0.46kW - Table size (length/width) 700x450mm, extendable to 1150mm - Cross slide on the carriage – cutting length on the extendable telescope 1860mm - Rotating block in the cross slide - 2 pneumatic clamps Length-cutting saw: - Max blade diameter 380mm - Max cutting height 110mm - Blade adjustable up/down, front/back and in angle - Blade guard - Saw motor 2.2kW Mortising spindle: - Pneumatic spindle stroke Hodpfx Afjzr Nb Setofn - Spindle adjustment up/down and stroke adjustment using knobs - Max tool diameter 320mm - Spindle diameter 40mm - Spindle working height 220mm - Spindle lock - Motor 7.5kW Profiling spindle: - Pneumatic spindle stroke - Spindle adjustment up/down and stroke adjustment using knobs - Max tool diameter 200mm - Spindle working height 220mm - Spindle diameter 54mm - Spindle lock - Sliding support from the table - Motor 7.5kW Saw for cutting window bead: - Max blade diameter 200mm - Blade bore diameter 30mm - Blade adjustable front/back, up/down - Blade guard - Motor 2.2kW Feed: - Number of rollers 8 pcs - Motor approximately 0.55kW - Roller size 110x50mm - 8 feed speeds: 4, 6, 8, 10, 12, 15, 20, 30 m/min - Suction nozzle diameter 60mm, 2x130mm, 110mm, 100mm - Working pressure 6-8 bar - Dimensions (length/width/height) 3600x2100x1600mm, weight approximately 2500kg ADVANTAGES – For window production – Pneumatic spindle stroke – Carriage with electric feed – Length-cutting saw – Mortising spindle – Unpainted, used machine, very good condition Net price: 27900 PLN Net price: 6488 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 1996, MACHINE FOR PRODUCTION OF BLOCK BAGS Hodpfjzlahpsx Aftofn Brand: MAC (ITALY) Description: machine for producing BLOCK bags with automatic break, year 1996, servo motors, automatic change of length, unwinding rolls with automatic brake 170 mm, longitudinal var with automatic thermoregulation, prefaltac for four runways (runway photocells each separately), head of brewing 120 mm station to handle and automatic stacking Bag with automatic clip, capacity 160-200 beats per minute x 4 lines Machine is in very good condition!

Condition: excellent (used), OERTLI window tools. Hfsdpfjz Iw Eusx Afton

Condition: used, Second-hand SAC window production line comprising: - Automation - SAC Type P5 (left-hand) - SAC Type P5 (right-hand) - SAC Type T400 - Window tool set IV 72/92 for sashes Hfedjz Dttyjpfx Aften Technical data: - On request

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Model TC-650 Max.Paper Size: 650 630mm Hsdpfx Afszymldjtsfn Min.Paper Size: 200 300mm Max.Window Size: 300 260mm Min.Window Size: 80 40mm Sheet Thickness: 0.05-0.25mm Max.Working Speed: 12000s/h Cardboard: 200-1000gsm Corrugated Paper: ≤3mm Total Power: 2.2KW 380V 50HZ Total Weight: 2000KG Overall Dimensions: 4500 1200 1600mm

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, total width: 900 mm, total length: 900 mm, total height: 1,800 mm, energy consumption: 11 kWh, Equipment: CE marking, documentation/manual, We offer this new RPE RPE-110 plastic/Cable/wood etc processing machine, year of construction 2025. The machine is designed for efficient shredding of both soft and hard plastics. It can also process materials such as cardboard, paper and wood, making it a versatile solution for recycling and waste-processing applications. The cutting rotor is fitted with 15 movable knives arranged in three rows, working together with 2 fixed knives mounted on the cutting chamber cover. The cutting chamber can be opened easily, providing convenient access for inspection, cleaning and maintenance. This design also allows the cutting knives and screen to be replaced quickly. The knives can be sharpened and reused several times, helping to reduce operating costs. Technical Specifications Motor: 11 kW, 400 V Capacity: up to 650 kg/h, depending on the type of material Screen perforation: 10 mm Rotor diameter: 260 mm Rotor speed: 560 rpm Cutting system: 15 movable knives + 2 fixed knives Cutting chamber: 500 × 370 mm Noise level: 80–95 dB Machine dimensions: 1420 × 1030 × 1410 mm Net weight: 780 kg The cutting chamber measures 500 mm in width and 370 mm in length. A 10 mm screen is supplied as standard, while a 6 mm screen is also available as an optional accessory. The crusher is suitable for processing a wide range of materials, including: Hfodpfx Aez Ikwdefton Plastic bottles Wooden boards Various plastic products such as soles, strips, profiles, mouldings and film Materials containing small amounts of metal, such as cables and electronic boards Paper, cardboard and paper waste Rubber products With a rotor speed of 560 rpm, the machine is designed to minimize heat generation and prevent excessive melting of the processed material. The powerful 11 kW motor, combined with the heavy-duty flywheel, provides sufficient power for processing demanding and hard plastic materials. The machine can achieve a throughput of up to 650 kg/h, depending on the characteristics and type of material being processed. A practical pull-out waste drawer allows the processed material to be removed quickly and conveniently. The drawer is fitted with four wheels for easier handling. Easy access to the cutting chamber simplifies routine maintenance, inspection and knife replacement. The machine is equipped with a main power switch, emergency stop and clearly arranged control panel. Safety systems are designed in accordance with the applicable EU safety requirements. For optimum performance, the material introduced into the machine should be pre-cut or supplied in a suitable size. The appropriate input fraction depends on the type and characteristics of the material. Safety and CE Certification The crusher is CE certified. Each opening/cover is fitted with a limit switch, preventing the machine from operating while the cutting chamber is open during maintenance or inspection. Drop Chamber Dimensions Width: 500 mm Height: 260 mm The machine is fitted with adjustable support feet, allowing accurate horizontal leveling during installation. Optional Equipment For an additional charge, the machine can be supplied with a waste drawer equipped with an exhaust connection, suitable for connection to an external extraction system. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- Available as an OPTION at an additonal cost of 20.000 Euro: extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): ----- - ??Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation Hedpfx Afoy Hl Iyjtsfn - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Condition: used, Year of construction: 2015, Biesse Uniline 4500 CNC processing center (i.e. for window & door frames) Description Biesse Uniline 4500 Machine nr; 1000004833 Year of construction: 2015 Machining lengths: 175 - 4,500 mm Number of milling motors: 1 Motor power: 19.2KW (25.7HP) Label printer: No Tool holder: HSK 63F Changer type: Fixed + movable Number of positions in toolchanger: Flexstore total 44 Software: BiesseWorks Office licenses: 1 x Fencing: Yes complete Extra The machine has a MULTIFUNCTION UNIT EQUIPPED with a drilling unit with four tool outputs. This is placed at the front of the processing unit. Also equipped with a CNC-controlled rotation axis so that the required output is automatically selected. The outputs are equipped with ER25 recordings, speed 5,000 rpm. (If this drilling unit is also to be used for sloping frames, only two exits (opposite each other) are used). The machine also has a MULTIFUNCTION UNIT EQUIPPED with a mortising unit with two tool outlets. This is placed at the front of the processing unit. Also equipped with a CNC-controlled rotation axis so that the required output is automatically selected. The outputs are equipped with ER32 recordings, speed 16,000 rpm. (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Hfodpfx Afjzp Hbqjtsn Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Arburg Type: Arburg Freeformer 300-3X PC has been renewed and upgraded Additive manufacturing of complex functional components With high-temperature option The new, larger Freeformer 300-3X processes three components in ARBURG Kunststoff-Freiformen (AKF) and, for the first time worldwide, enables the industrial additive manufacturing of complex functional components in a durable hard-soft composite with a support structure. The designation 300 indicates the available component carrier area in square centimeters. The build space now offers 50 percent more space for parts with dimensions of up to 234 x 134 x 230 millimeters compared to the Freeformer 200-3X. "3X" indicates the three axes of the component carrier that can move in the x, y, and z directions. For Additive Manufacturing Manufacturer: Arburg Build volume [cm³]: 7211 Build space X [mm]: 234 Build space Y [mm]: 134 Build space Z [mm]: 230 Printing material: ABS, PC, PLA Class: Industrial Operating voltage: 400 / 400 V 3〜50 Hz Control voltage: 24V= Total rated current: 11 A Total connection: 7.8 kW Year of manufacture: 2019, operating time: 1483 hours Weight: 1593 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) Hfsdpfezd Tiwox Afton We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Code: 0407 Brand: OMGA Model: BA 525 A - CE Standard Hardware assembly center for door and window frames - CE Standard Technical data: Work table covered with felted scratch proof strips , rear part pneumatically inclinable from 0° to 10° with intermediate angles Composition: Carriage with self-fed pneumatic screwer with Böllhoff loader, work stroke controlled by a pneumatic cylinder with a inclusion-exclusion system , height adjustment Hfsdpfx Afezcqxneten Right/left backstops for height positioning of right/left handle holes Drilling unit with 3-bit head for the execution of handle holes Pneumatically operated hydraulic shear for cutting hardware Work table size mm 3500 x 1230 Work table height mm 920 Max working dimension mm 2800 x 2450 Min working dimension mm 350 Dust collector Working pressure 6/7 bar Overall dimensions mm 3600 x 1700 x 1000 h Weight kg 480

Condition: used, Eos EOSINT Here, we offer an Eos EOSINT plastic laser sintering system. Hfedpfx Afjzdyxljten The following items are included with the EOS P380 system: Build chamber Powder container Overflow container 3DM 8-zone process chamber heating, 250°C Each zone can be adjusted individually, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/400V AC Frequency 50 Hz Connected load 8 kW Fuse rating 32 A MAX. laser power 100 W Laser class open 4 Laser class closed 1 Weight 850 kg EOSINT P 380 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Eos EOSINT P 380 Eos EOSINT plastic laser sintering system P380 The following items are included with the EOS P380 system: Build volume container Powder container Overflow container Cooler: Termo TEK thermochiller, type: 802-18644-3 Unpacking stamp Removal trolley 3DM 8-zone process chamber heater, 250°C Each zone can be set individually, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V AC Frequency 50 Hz Connected load 8 kW Fuse rating 32 A MAX. laser power 100 W Laser class (open) 4 Laser class (closed) 1 Weight 850 kg Hfodpfx Afozdywzoten Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 1997, power: 1.5 kW (2.04 HP), Tria plastic grinder, shredder, granulator for sale in excellent condition make: TRIA 20-15/BL-T Power: 1.5kW, 50Hz, 380V Year of manufacture: 1997 Inlet opening: 200 x 230mm rotating knives 3 pcs standing knife: 1 pc Spout opening: 60mm Hfedpfx Aora N A Noftjn Final product size: 3-5mm Capacity: 30 kg/h approx.

Condition: excellent (used), functionality: fully functional, Used Maguire plastic drying units are for sale. This listing includes a total of 13 units, with the option to purchase individual units or a larger package. Available are Low Pressure Dryer and Vacuum Batch Dryer / vertical dryer models. Condition as shown in the photos. Price depends on the selected unit and quantity. These dryers are designed for drying plastic granules. The units are used, and their technical and visual condition corresponds to the photos. Additional photos of a specific dryer can be provided upon request. Available units: No. Designation Type / model as shown in the photos 1 D067 Maguire Low Pressure Dryer, model LPD2HE4 2 D049 Maguire Low Pressure Dryer, model LPD1HE4 3 D084 Maguire Low Pressure Dryer 4 D099 Maguire Low Pressure Dryer, model LPD1HE4 5 D054 Maguire Low Pressure Dryer, model LPD1HE4 6 D051 Maguire Low Pressure Dryer, model LPD1HE4 7 D065 Maguire Low Pressure Dryer, model LPD1HE4 Hfedpfx Afezc D Ebetsn 8 D071 Maguire Low Pressure Dryer, model LPD1HE4 9 D068 Maguire Low Pressure Dryer, model LPD2HE4 10 D076 Maguire Vacuum Batch Dryer, model VBD-150 11 D081 Maguire Vacuum Batch Dryer, model VB-150 12 D089 Maguire Vacuum Batch Dryer, model VB-150 13 D091 Maguire Vacuum Batch Dryer, model VB-150

Condition: used, Manufacturer: WEINIG Type: UC6 Year of manufacture: 1997 Condition: untested Machine description/technical data WEINIG UNICONTROL6 window manufacturing system including Oertli tool set IV68 and IV77 wood + wood/aluminum (all cutting drawings available upon request) Screen control for 99 window types. 1 type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Manufacturing possibilities: Individual parts, double parts, frame-wise, series production, edge profiling Control of tool positions (longitudinal and transverse machining) via selector switch on the control panel Transverse machining: - electronic length stop for wood lengths up to 2,600 mm, with auxiliary stop for wood lengths up to 3,600 mm, with slot table that moves along and has separate control -Studio window setup: Swiveling length stop ± 60° with electronic digital display and pneumatic clamping Sliding counter rail Special pressure pad for the production of angled parts Cut-off saw 3 kW Axial adjustment manually with mechanical digital display Laser guide for cut-off saw to detect the section Cut-off saw pneumatically controlled, mortise dimension adjustable via mechanical numerical display Mortise and slot spindle 11 kW (standard 7.5 kW) Tool clamping length: 320 mm Number of tools: 4 x 80 mm Axial adjustment: 240 mm Electronic spindle brake Longitudinal machining: 7 feed rollers in the infeed and 5 in the outfeed, high/low controlled for faster and shorter edge profiling process Synchronous spindle (vertical right) 7.5 kW Before the profiling spindle for splinter-free edge profiling Profiling spindle 11 kW (standard 7.5 kW) Number of tool positions: 4 x 80 mm, pneumatically controlled Axial adjustment: pneumatic Mechanical spindle brake Profile milling unit (horizontal above) 3 kW After the profiling spindle, radially controlled to 2 positions and axially controlled to 3 positions Mechanical spindle brake Profile milling unit (vertical right) at the end of the machine 3 kW Radially controlled to 2 positions and axially controlled to 3 positions Plunge automation: The plunging in/out at the beginning/end of the wood is controlled via 2 adjustable limit switches. Plunge tolerance ± 3 mm. Mechanical spindle brake Return conveyor to the operator including identification function for further processing Partial renewal of pneumatic hoses and extraction hoses in the machine required! Price in €: on request VAT: exclusive Availability & Location Location: Greater Freiburg area Available: promptly after dismantling Inspection: in operating condition / in operation Hedpfxozx Smqe Aftsfn Price in €: on request

Condition: used, Injection molding machine ARBURG, Type Allrounder 320 C 600-100 Serial No. 189356, Year of manufacture 09/2002 Clamping force 60 tons Screw diameter 25 mm Dosing volume max. 49 cm3 Injection pressure max. 1570 bar Opening stroke - platen stroke max. 350 mm Platen dimensions 446 x 446 mm Tie bar spacing 320 x 320 mm Mold height min.: 200 mm Platen spacing min.: 200 mm Platen spacing max.: 550 mm Centering of fixed and moving platens 125 mm Heater power 4.9 kW Motor power hydraulic pump 15 kW Mains connection 400 Volt, 50 Hz, 19.9 kW - Machine control SELOGICA - Two controllable hydraulic circuits for core pullers - Injection unit with COLORTRONIC material hopper for automated granule feed - U-version interface - HHG interface - Control ARBURG MULTRONICA with foil keypad and integrated display - 88790 operating hours recorded (power-on hours) - 44925 operating hours of the hydraulic pump (hydraulic on) - Control cabinet fixed to the machine - Work area protective doors at the front and rear, manually sliding with safety switches - Mobile control panel with function keys, mounted on the back of the machine Space requirement L x W 3650 x 1700 mm Height with material hopper 2200 mm Hsdpfx Aszqglroftsfn Weight 3000 kg Good condition

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm Hedjt R T Hcopfx Aftsfn - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: excellent (used), Year of construction: 2018, operating hours: 10,000 h, Weinig production line CONTUREX C 125 Year of manufacture: 2018 Approx. 10,000 operating hours Technical data and more images available upon request. Hjdpjy Emrkjfx Aftefn