Used Plate Filter for sale (21,825)

Condition: new, Year of construction: 2025, Cutting length 3200 mm Cutting height 1600 mm Motor output 1,3 kW Dimensions (L/W/H) 4000x1500x2000 mm machine weight ab. 350 kg Fodpfx Ajwiipmeh Usgi

Condition: used, Year of construction: 1994, sheet width 3100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 3.0 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 12 - 50 Hub/min back stop - adjustable 5.0 - 750 mm oil volume 120 ltr. engine output 7.5 kW weight 6400 kg. Fedpfsxaap Nox Ah Usgi range L-W-H 4045 x 1783 x 1750 mm Good condition (!!) According to the previous seller, with very few operating hours From a maintenance workshop Equipment: - Robust electro-hydraulic sheet metal shear * Design: Guide rail - LVD control panel centrally located on the front of the machine - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment * Adjustment from the front - via handwheel * Including analog value display - Electro-motor-driven backgauge with recirculating ball screws * Continuously variable adjustment range * Analog position display * Rapid traverse possible - Ball transfer units + recessed grips in the support table - Front finger guard - 1x freely movable foot switch - 2x emergency stop buttons at the front - Original operating instructions * Special accessories included: - LVD movable sheet support device for thin sheet metal blanks - 1x LVD extra-long side stop (3.000 mm) with Support leg - 1x LVD used set of replacement blades

Condition: good (used), Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: on solid base frame Fsdsxryzispfx Ah Ujgi -Clamping surface: 2015 x 1000 mm -Table height: 930 mm -Plate thickness: 30 mm -Transport dimensions: 2015/1000/H930 mm -Weight: 973 kg

Condition: new, PTG - eccentric die 9 and 10 mm Ø, anvil 15°, clamping/equalising plates, PMH - Anvil 15° and others, clamping/equalising plates 6°/4° and 8°/5° Fgodpfx Ahepfaxus Uji POR 40/42U - eccentric die 9.5 mm Ø, anvil 9.5 mm Ø

Condition: used, functionality: fully functional, Year of construction: 1997, Used guillotine shear by Safan Type: VS 255 4 Fedpjxrf Hwefx Ah Ujgi Capacity: 2550 x 4 mm Electric back gauge with NC control

Condition: good (used), Year of construction: 2012, Cooling/filter installation with vacuum filter Fgjdexrnvuepfx Ah Uoi Function: A vacuum pump directly connected to the filter drum's inner chamber draws the medium into the drum. During this process, contaminants are retained on the filter drum’s surface by a fine-mesh fabric. The vacuum increases due to the resistance caused by the accumulating filter cake. When a preset negative pressure is reached, the drum is automatically rinsed. An installed scraper chain removes the sludge. The system can be controlled either via a PLC controller or directly from the processing machine.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6000x1150x2980 mm Weight 800 kg Total power requirement 3 kw Fedpfjvz Eukox Ah Ujgi

Condition: used, total length: 5,250 mm, total width: 1,400 mm, total height: 1,600 mm, Empty weight: 6.000 kg - Documentation available: No - Serial number: 1011268 - Max. sheet thickness: 6mm - Top roll diameter: 220mm Fgedpfx Ajw Elvhjh Uji - Max. working width: 3040mm - Drive: raulisch - Number of rolls: 4 - Bottom roll diameter: 220mm - Motor power: 5.5kW - Transport dimensions: 5250mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: surface plate with adjustable feet -Length: 2000 mm -Width: 1000 mm -Height: 285 mm Fodpfoxrywqex Ah Uogi -Plate thickness: 35 mm -Adjustable feet: 4 pieces 240/240/H590 mm -Transport dimensions: 2000/1000/H525 mm -Weight: 960 kg

Condition: ready for operation (used), length 6000 mm width 2500 mm total power requirement / kW Without PC and software Dimensions (L×W): 6000 × 2500 mm, without vacuum plate Fgedpfxjud Il Se Ah Usi Manufactured according to DIN 876 / class II

Condition: good (used), functionality: fully functional, Year of construction: 1995, Used hydraulic guillotine shear by Safan Model: VS 205 6 Capacity: 2050 x 6 mm Electric NC back gauge Fgjdpfoxrf Emex Ah Usi Rear safety guard

Condition: good (used), Year of construction: 1991, sheet width - max. 1010 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded max. 20 Hübe/min cutting angle 1.5 ° work height max. 900 mm Control ELGO total power requirement 5.5 kW weight of the machine ca. 2200 kg. range L-W-H 1500 x 2155 x 1606 mm from a maintenance workshop good condition (!!) - in checked conditions - machinevideo - ?v=w22S17mfU-A Equipment: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * Includes NC ELGO positioning control "TYP 85" - Electric cutting length limiter - Manual cutting gap adjustment - 1x side stop with scale Fsdpfsxrgv Tex Ah Uegi - 2x support arms - 1x freely movable foot switch - Original operating instructions * Special accessories included: - Pneumatic holding device for thin sheet metal blanks

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5000x1150x2980 mm Weight 665 kg Fgsdpsvz Eudsfx Ah Usi Total power requirement 3 kw

Condition: used, Price: On request Plate roller Sheet metal roller Model: Hydraulic Model: 4-Roller! Manufacturer: Chr. Haeusler (Switzerland) Fgjdpfx Asww Iygeh Usi Type: VRM HY L4000x6 Working width: 4100mm Max. sheetthickness: 6mm (Inox) - 14mm (Alu) Upper-roller: 350 mm Other rollers: 250 mm Incl. conical bending Incl. hydraulic retraction-assist Machine-weight: 23000kg Video's available before dismantling. - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: Straightening plate with adjustable feet -Length: 2000 mm -Width: 1000 mm -Height: 285 mm -Sheet thickness: 30 mm -Adjustable feet: 4 pieces 240/240/H590 mm -Transport dimensions: 2000/1000/H525 mm Fsdpfx Ahjxryv Hs Uegi -Weight: 960 kg

Condition: used, functionality: fully functional, Year of construction: 2004, Hydraulic Guillotine Shear Make: ERMAKSAN Model: HGS 3100x6 Year: 2004 Technical Data: Manufacturer: ERMAKSAN Model: HGS 3100x6 Year of Manufacture: 2004 Sheet Width: 3,100 mm Sheet Thickness: 6 mm Cutting Angle: 1.2° Strokes per Minute: 18 Number of Hold-Downs: 15 Fgjdexrtxujpfx Ah Uji Motor Power: 11 kW Back Gauge: 1,000 mm Space Requirement: L 3.8 x W 2.2 (plus support arms) x H 1.6 m Machine Weight: 5.5 t Equipment: • Angular stop • Support arms • Programmable 1,000 mm back gauge via ELGO controller • Automatic blade gap adjustment • Pneumatic sheet support device • Cutting length limiter • Folding finger guard • Light barrier for rear area safety All information is provided without guarantee. A powered demonstration is available at any time in our showroom.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, total width: 2,350 mm, total height: 6,300 mm, volume flow: 25,000 m³/h, type of input current: AC, overall weight: 2,800 kg, input voltage: 400 V, power: 55 kW (74.78 HP), 3 filter units each : JKF model Jet Blower BF 90 - 3.5 ( there 90 it is the number of filters bags and 3,5 it is the length of filter bag) Year 1996 - all function in fully working conditions 149,5 m2 filter area gives approx 25 000 m3 with possibility to overload by 20%. One Blower engine 55 kw and two units with 45 kw engines. 400 V AC 50 HZ el. connection Please open the included PDF document for all measurements. Please contact for more information. Fgsdpfsxu Dr Rjx Ah Uoi Rekman Maskin & Service since 1986 All filters are still connected to el. power and can be shown in working conditions. Located in Norway .

Condition: new, three-jaw chuck diameter: 630 mm, STOCKLIST NEW BISON CHUCKS Chucks in Original wooden Boxes ===== 1 x 4344-630-8 1 x 4344-315-11 1 x 4334-630-8 1 x 4334-500-6 1 x 3204-160 1 x 4305-800 (JAWS) 1 x 3244-400-8 1 x 3544-400-11 3 x 4344-400-6 1 x 3704-250-6 1 x 4344-250-6 1 x 3514-250-6 1 x 3744-400-11 1 x 3704-400 1 x 3544-400-8 1 x 3245-400-8 Fgjdpfjqpg Hyex Ah Uji 2 x 4334-400-8 2 x 4344-400-8 1 x 3434-315-8 1 x 4344-200-6 1 x 3704-315 1 x 4344-250-8 1 x 3204-200 1 x 3234-200-5 Please always check if still available! Delivery: EXW – NL

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6530x1150x2980 mm Weight 900 kg Total power requirement 3 kw Fgedpfx Aovz Eg Hsh Uoi

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection Fsdpfor R Ewlsx Ah Uogi - Without control system (no control system present) - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Condition: good (used), exhaust filter system, exhaust filter system, exhaust filter, hot filter, industrial exhaust filter Fgodjg I D Nyepfx Ah Uji -Filter system: Manufacturer/type unfortunately unknown flange dimensions DN100 -Individual components: see photos -Dimensions: 2020/1630/H2490 mm / 1850/800/H800 mm -Total weight: 1292 kg

Condition: excellent (used), Faceplate Make Röhm (28480) Diameter 500 mm height 105 mm Jaw height 80 mm Short cone size 8 Cone diameter 139.7 mm 4 stud bolts M 16 Pitch circle diameter 171.4 mm Fgsdpotq Aklofx Ah Usi

Condition: good (used), Electric griddle with open base with 2 heating zones, each 4.2 kW operating temperature of each heating zone adjustable from 120 to 280°C (thermostatically controlled) cooking surface inclined 1.5° forward for grease drainage 1.5 mm thick stainless steel front and top panels, stainless steel side and back panels Scotch-Brite finish, rounded edges on all sides IPX4 - splash-proof standard with grease drip tray and 3-sided stainless steel splash guard with height-adjustable feet (+50 mm) External dimensions (W x D x H): 800 x 700 x 850 mm Fsdpfoxvy Hyox Ah Usgi cooking surface dimensions (W x D): 730 x 540 mm cabinet dimensions (W x D x H): 680 x 640 x 420 mm Weight: 80 kg Find more items - new and used - in our shop! International shipping costs on request!

Condition: new, CNC Hydraulic guillotine shear New machine Manufacturer:UMS Type : PRO. 3100 x 13 CNC Technical data: Cutting length 3100 mm Fsdpfxjnl D Tfo Ah Uogi sheet thickness (42 kgf/mm) 13 mm sheet thickness (70 kgf/mm) 8 mm cutting angle: 0,5 - 3 mm 15 pcs. blank holder Cybelec Cybtouch 8 monoblock: steel welded construction Automatic cutting gap adjustment Table with ball rollers High quality, hardened and ground upper and lower knives Light sensor for front side (sheet guide) Adjustable cutting stroke 1 m support arm with scale 1 m support arms ( 2 pieces ) Rear light sensor ( 10-16 mm sensor distance) Cutting line illumination Motor 30 kW throat 180 mm Cutting speed 7/13 Original Rexroth valves Rexroth hydraulic system Rexroth pump, original Eckerle Electrical parts from Siemens Operating instructions German Table height 900 mm Overall dimensions 3840x2830x2180 (WxLxH) Total weight 11.000 kg plus commissioning, training and transport Delivery time from order approx. 70 days

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -Quantity: a 2nd plate is still available ID21154 -Clamping plate with: a carriage with clamping device -Car dimensions: 1450/810/H1120 mm -Weight: 490 kg -Width: 1465 mm Fjded Ehfmopfx Ah Usgi -Length: 4930 mm -Working height: 850 mm -Plate thickness: 35 mm -Plate height: 300 mm -Plate with: support ribs -Groove width: 52 mm -Groove spacing: 292 mm -Transport dimensions: 4930/1670/H850 mm -Weight: 5900 kg