Used Plate Filter for sale (16,386)

Condition: used, Technical details: floor-plate length: 3000 mm plate width: 1775 mm Dksdpou N Dglefx Al Uon plate height: 350 mm Material of the plate = cast steel. incl. 6x adjustment screws M30 7pcs. T-slots according to DIN 650 a=35; h=60; b=62; c=26mm; center distance 250mm The clamping plate is equipped with a side fixing on the longitudinal side and on the front side. *

Condition: used, Year of construction: 1979, Technical details: floor-plate length: 6400 mm plate width: 1870 mm Djdpfxeu N Dqdo Al Ujkn plate height: 415 mm weight of the machine ca.: 8600 kg transport dimensions LxWxH: 6,4 x 1,9 x 0,42 m Very high quality (no damage) Steel Plate - T-groove DIN 650 - a=36; h=69; b=59; c=25mm; Groove distance= 315mm - included: 26 cover plates Ø 147 x 3mm *

Condition: used, Technical details: floor-plate length: 4600 mm plate width: 1450 mm plate height: 300 mm Plate thickness: 300 mm weight of the machine ca.: 7,2 / Platte t 2 clamping plates ( price per plate) Material cast steel Finished surface T-slots according to DIN 650: a=40; h=66; b=71; c=29 mm Center stand 300mm 6x through holes Ø 41.0 mm * Dkjdswtctgopfx Al Uon

Condition: used, Technical details: air flow rate: - m³/h Dsdpfx Aeu Nwv Hsl Uekn suction stud diamter: 160x45 mm weight of the machine approx.: 68 kg dimensions L x W x H: 650x600x2300 mm dust suction device without fan (without suction mechanic) installed on a steel fram with 4 base stands, Filter: filter drum Dia.=360x520mm, rotatable manual, space of filter size W:580xWB:560xH:750mm -intake (suction) conection diameter 160x45mm (sideways) - dirt ejection diameter = 280x110mm , bottom opening - exhaust opening diameter=160mm ( ceiling) via flange bolted diameter=250mm and angular adapter dia. = 145mm *

Condition: used, Technical details: tank capacity: - l voltage: 230 / 50 V / Hz weight of the machine approx.: Anlage ist demontiert kg Dkedpeu Nw Hlofx Al Ujn OSMOSIS PLANT *

Condition: used, Technical details: Dksdpfx Alou Nz Ugs Uen tank capacity: - l total power requirement: 2,2 kw volume capacity: max: 1329 m³/h filter: Patronenfilter air-pressure connection: 6 bar weight of the machine approx.: 88 kg dimensions L x W x H: 1,15 x 0,60 x 2,35 m Cartridge filter/ smoke gas separator with spark pre-separator (H2O) for combustible dusts. Sheet metal construction. Pressure 2,250 Pa Temperature max. 65°C Compressed air tank size Ø 150x 480mm with 1x hose connection Ø 10mm and 1x screw connection inside with shut-off valve 1/2 inch Intake Ø 200mm, floor height = 940mm Exhaust air on ceiling side, 500 x 500mm with tile filter Spark pre-separator medium water Dust collection container size L:360 x W:465 x H:280mm, floor mounting (removable) *

Condition: used, Technical details: table length: 870 mm table height: 420 mm table width: 680 mm weight of the machine ca.: auf Anfrage t dimensions L x W x H: 0,91 x 0,71 x 0,42 mit Untergestell m Dksdpsu N Dgxefx Al Usn Central hole Ø 180mm T-groove in accordance with DIN 650: a=22mm; h=38mm; b=40mm; c=16mm with foot support *

Condition: used, Technical details: floor-plate length: 2990 mm plate width: 1990 mm plate height: 190 mm Plate thickness: 190 mm weight of the machine ca.: ca. 7,0 / pro Platte t transport dimensions LxWxH: ca. 3,0 x 2,0 x 0,2 / pro Platte m There are 2 plates for sale. Material cast steel Surface milled/finished T-slots according to DIN 650: Dksdoval H Rspfx Al Uen 8xT-slots large: a=36; h=70; b=55; c=25.5 mm 7xT-slots small: a=28; h=38; b=47; c=21 mm Center stand 123 mm 9x through holes Ø 80 mm 6x through holes Ø 33 mm *

Condition: used, Technical details: Length: 1530 mm width: 1180 mm height: 110 mm weight of the machine approx.: 500 kg transport dimensions LxWxH: 1,55x1,18x0,1 m steel plate Dodpfju Nkiyex Al Uskn *

Condition: used, Technical details: Dkodpfx Alsu Nkl Ij Uon floor-plate length: 3880 mm plate width: 1390 mm plate height: 300 mm number of T-slots: 4 Stück weight of the machine ca.: 3,2 t space requirements of the machine approx.: L:3,7xB:1,4xH:0,3 m dimensions L x W x H: 3,7 x 1,4 x 0,3 m distance of t-slots=250mm T-slot size: a=28mm b=50mm c=24mm h=52mm *

Condition: used, Technical details: Length: 800 mm width: 315 mm voltage: 110 V clamping surface area: 795 x 315 mm current: 1 A weight of the machine approx.: 130 kg dimensions L x W x H: 0,85 x 0,35 x 0,09 m Magnetic clamping plate Magnetic strips 18x, width 20mm, distance 40mm * Dodpfx Alou N D Nao Ujkn

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW Dodpfou Rni Hjx Al Uekn weight of the machine ca.: 4,56 t dimensions of machine: L: 3,64 x B: 2,55 x H: 1,58 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet *

Year of construction: 1998, condition: used, Technical details: air flow rate: 1200 m³/h suction stud diamter: 360 x 350 mm drive power: 0,11 kW Dkjdpfx Aswfr Dljl Usn connected load: 380V V weight: - kg total power requirement: 0,59 kW dimensions L x W x H: 600 x 550 x 560 mm

Condition: used, Technical details: floor-plate length: 2003 mm plate width: 1005 mm plate height: 180 mm Dedpfx Aownfu Nsl Uskn transport dimensions LxWxH: 2,02 x 1,05 x0,18 m 3 pcs availabe (price per piece) Cast steel Table surface 2020mm x 995 mm Longitudinal groove: Number 4 Size: a=38, h=60, b=59, c=24 mm Center-to-center distance 250 mm Fixing hole: Number 4 Size D=30mm *

Condition: used, Year of construction: 1992, Technical details: sheet width: 4050 mm plate thickness: 16 mm Dodpfx Alou Icpcj Uekn distance between columns: 4900 mm control for program: Robosoft SC5 Controller back gauge: 1000 motorisch cutting angle: 0,5° - 3° ° cutting gap adjustment: ja / jes mm down holder: 23 Stück height over floor: 1030 mm Table dimensions: L x B 4000 x 520 mm weight of the machine ca.: 19,2 t dimensions of machine: 5,2 x 2,2 x 2,78 m characteristics: - knife length 4100mm, 4 turns possible - Number of strokes: 5 - 11 strokes/min. - Table: side stop with linear scale, with stop bar 1000mm removable, feed aid via / with ball bearings - front support: LxWxH: 1600 x 1100 x 1000 mm; movable over roller rail, easy handling - backgauge adjustable, motor driven and foldable Operation via control panel with jib lenmgth arm and foot control Equipment: - light grid at backgauge - cut line ilumination Accessories: - 1 set (2 pieces) shearing blades *

Condition: used, Technical details: floor-plate length: 4200 mm plate width: 1200 mm plate height: 2000 mm Plate thickness: 180 mm weight of the machine ca.: 2590 kg Dedpfxeu Nutij Al Uokn Aluminum plate with 800 clamping holes, M8; countersunk Ø 11,5 x 15mm with 4 clamping holes, M24 The plate is placed on a wooden support frame. *

Condition: used, Year of construction: 1973, Technical details: Length: 300 mm width: 275 mm Djdou Nvrgopfx Al Uekn voltage: 220 / 50 V clamping surface area: 300 x 275 mm current: 15 A weight of the machine approx.: 39 kg dimensions L x W x H: 0,47 x 0,28 x 0,09 m Magnetic plate *

Condition: used, Technical details: floor-plate length: 4500 mm plate width: 1250 mm plate height: 250 mm Plate thickness: 250 mm weight of the machine ca.: 3,6 / pro Platte t transport dimensions LxWxH: ca. 4,5 x 1,3 x 0,3 / pro Platte m There are 2 plates for sale. Material: Cast steel T-slots according to DIN 650 a=21; h=40; b=39.5; c=16mm; center distance T-slot to T-slot = 250mm Dksdpfsval Hdsx Al Ujn *

Condition: used, Technical details: Length: 400 mm width: 250 mm height: 70 mm space requirements of the machine approx.: L:1,0xB:0,63xH:0,68 m MESS PLATE made of granite with central T-slot guide, center distance = 120.5mm Dkedpfx Alju Nkwws Uen *

Condition: used, Technical details: table length: 800 mm table width: 630 mm table height: 160 mm height over floor: ca. 810 (im Gestell) mm weight of the machine approx.: ca. 140 kg Dsdpfxou Nkpaj Al Uokn space requirements of the machine approx.: 0,8x0,65x0,82 m surface plate with squares 100x100mm - on a frame *

Condition: used, Technical details: floor-plate length: 810 mm plate width: 690 mm plate height: 190 mm hole diameter: ca. 119 mm weight of the machine ca.: 0,56 t transport dimensions LxWxH: 820 x 700 x 200 mm T-slots centric Dkjdou N Diyspfx Al Ujn *

Condition: used, Technical details: Djdpju N Dmlefx Al Ujkn floor-plate length: 4000 mm plate width: 1000 mm plate height: 1700 mm material thickness: 150 mm weight of the machine ca.: 2300 kg Cast aluminum plate, finished This plate can be used for assembly work on both sides. Numerous clamping holes (M8) evenly arranged on the plate. By means of lift/chassis (welded/screwed) the aluminum plate stands securely on the floor. The plate can be moved via two wheels each. *

Condition: used, Technical details: floor-plate length: 5040 mm plate width: 2230 mm plate height: 460 mm weight of the machine ca.: 9500 kg Machine table can be used as clamping plate. - material - cast steel - clamping surface 4100 x 2230mm - outlet part lateral (at the side) = W: 2110 x L: 1040mm Dkedpfou N Dqqex Al Usn T-slots according to DIN 650 - b=54.0; c=21.0; h=55.5; a=33.0mm - center distance 250mm *

Condition: used, Technical details: floor-plate length: 4015 mm plate width: 2000 mm plate height: 310 mm weight of the machine ca.: 5800 kg Dsdpfx Aou N Drhel Ujkn Cast steel plates T-slots according to DIN 650 a=25; h=62; b=51; c=25mm center stand T-slots= 250mm 16 pcs. countersunk holes Ø 33 + Ø 40 mm and 6 pcs. through holes Ø 120mm i.D. *

Condition: used, Technical details: Dkjdju Nkkwjpfx Al Usn table length: 800 mm table width: 300 mm table height: 130 mm weight of the machine approx.: 55 kg space requirements of the machine approx.: 0,8x0,3x0,13 m surface plate does have holes! *