Used Pneumatic Bandfeeder for sale (7,488)

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 2,200 h, load capacity: 4,000 kg, lifting height: 4,520 mm, free lift: 1,520 mm, fuel type: diesel, mast type: triplex, construction height: 2,540 mm, fork carriage width: 1,200 mm, fork length: 1,600 mm, empty load weight: 7,500 kg, total length: 3,620 mm, drive type: Diesel, construction width: 2,240 mm, Rough terrain forklift Fork width: 125 mm Fork thickness: 50 mm Mast type: Triplex Gjdpfx Abjz Evt Eshokd Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 16.5/85-24 Rear tire type: Pneumatic Rear tire size: 12.5-18 Description: In addition to this JCB model, we have approximately 200 heavy-duty forklifts, compact forklifts, reach trucks, and side loaders in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease-purchase and financing at favorable terms are always possible for us. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this 940-4 T4. P.S.: Our forklift master workshop specializes in the repair, maintenance, overhaul, and custom fabrication of forklifts from 8 tons upwards. We would also be happy to offer your vehicle for sale on consignment. Side shifter, Heater, full cabin, full free lift, 4x4

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Fully refurbished OPS Ingersoll Gantry 500 Wire EDM machine – in top technical and visual condition. The machine has undergone a comprehensive and professional overhaul in our workshop and is in very good condition both technically and visually. During the overhaul, the machine was disassembled to over 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric measurement, alignment, and additional inspection were performed using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and pneumatic hoses, were completely replaced. In addition, the machine was completely repainted and now presents itself in a very well-maintained visual condition. The generator and the control system were cleaned and technically inspected. The air conditioning unit of the generator was also cleaned to ensure reliable cooling and stable operation. Finally, the machine was subjected to an extensive erosion test in accordance with the quality and testing specifications of OPS Ingersoll. Gedpfx Abjyrqpfshokd The machine is immediately ready for operation and is ideally suited for reliable production. Technical data: Ingersoll (OPS Ingersoll) Wire EDM machine OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture 2009 Control system EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld - multifunctional handheld device Manual erosion with Powertec Handheld High Speed Jump max. 18 m/min Generator power 60 Amperes, EAGLE Powertec Travel ranges (X, Y, Z) 525 x 400 x 450 mm Electrode changer 20-position pick-up disc changer Working tank (W x D x H) 770 x 670 x 440 mm Work table (W x D) 750 x 650 mm Load capacity 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special equipment: Linear measuring system in all axes (Z as standard) 09.11

Condition: ready for operation (used), Year of construction: 2023, operating hours: 533 h, travel distance X-axis: 1,060 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, table width: 600 mm, table length: 1,200 mm, overall weight: 7,800 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis POSmill CE1000 was manufactured in 2023. It features an X-axis travel of 1,060 mm, Y-axis travel of 600 mm, and Z-axis travel of 600 mm. The machine is equipped with a Heidenhain TNC 640 control unit and has a maximum spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the POSmill CE1000 vertical machining centre we have for sale. Contact us for further details. - Coolant Supply Through Spindle / High Pressure: 20 bar- Rated Power: 30 kVA- Voltage: 400 V (3-Phase, 50 Hz)- Full Load Current: 52 A- Max. Current Load: 250 A- Short-Circuit Resistance: 25 kA- Spindle Hours: 533 h- Power-on Hours Machine / Control: 2,410 h / 2,436 h- Tool Changer: 40-fold ISO 40- Internal Coolant Supply (IKZ): 20 bar with belt filter system- Equipment: Documentation/Manual, chip conveyor, external high-pressure coolant unit/tank with filtration, pneumatic maintenance unit, electronic handwheel- Condition: Very good, fully functional; checked in late 2025 by POSMILL with no defects found, proofs available- Usage History: Exclusively soft-annealed tool steels (no hard or dry machining)- Measuring Systems: Heidenhain linear measuring system (X, Y, Z), Wireless Pick Up tool measuring system 35.40 TS, Workpiece measuring system 25.50-HDR Technical Specification Through-spindle Coolant Yes Gkedeznkrdepfx Abhod Taper Size ISO 40

Condition: excellent (used), Quick-acting glue press Ruck Zuck WP 12/2 - pneumatic - 12 pressing stations, each with dimensions of 1400 x 800 mm Gkjdpfxey Tm Afo Abhed

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Gsdpfswcfgbjx Abhjkd Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: used, Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders, clamping cylinders -Manufacturer: Festo, standard cylinder type DNC-63-600-PPV-A -Stroke: 600mm -Piston: Ø 63 mm -Piston rod: Ø 20 mm / M16 x 1.5 -Max. Pressure: 12 bars Gkedpfx Ajqa I H Sobhod -Dimensions: 790/75/H110 mm -Weight: 6,2 kg

Year of construction: 2019, condition: excellent (used), load capacity : max 360 kg Extendable : 700 mm x 1400 mm Angle of rotation around longitudinal pivot : 360` Gedpfxspu D Dze Abhjkd

Condition: used, Year of construction: 2015, functionality: fully functional, overall weight: 880 kg, Specification: Protection rating: IP54 Control voltage: 24V DC Fuse: 16A Power: 0.5kW The hydropneumatic press with feeder from Tox Pressotechnik is a versatile and efficient solution for the precise and reliable processing of a wide range of materials. By combining hydraulic power and pneumatic control, it allows for uniform force transmission as well as fast and controlled operation. The integrated feeder ensures a smooth material flow, increasing productivity and optimizing the production process. Gedpfx Abjwq R Rhjhjkd

Condition: used, Year of construction: 2014, functionality: fully functional, overall weight: 840 kg, Specification: Protection class: IP54 Control voltage: 24V DC Fuse: 16A Power: 0.5kW Dimensions: L: 130cm W: 90cm H: 255cm The hydropneumatic press from Tox Pressotechnik is an innovative and versatile solution for demanding manufacturing processes. It combines the advantages of hydraulic power with pneumatic control to ensure precise and even force transmission. The press is characterized by its high flexibility, making it suitable for a wide variety of applications such as forming, joining, or precision work. Thanks to its robust construction, it is durable and low-maintenance, making operation reliable and efficient. Gsdpfswq Sc Ejx Abhekd

Condition: new, Year of construction: 2026, functionality: fully functional, Pneumatic Hold-Down for a Sliding Table Saw – Essential Equipment for Maximum Material Stability A pneumatic hold-down for a sliding table saw is an essential piece of equipment for facilities that require maximum stabilization of the material being cut. The two-section model with a length of 3,200 mm ensures secure and even pressure against the worktable, eliminating problems commonly associated with working without a hold-down – chipping, material waste, and inaccurate cuts. Key Advantages Pneumatic hold-down with two independent sections – each equipped with two cylinders, allowing flexible control of the pressure applied to different areas of the table. Extended 3,200 mm beam – provides full coverage of a typical sliding table saw table length and is ideal for processing large-format panels. Optimal working force at low pressure – effective operation from just 2.0 bar, resulting in lower energy consumption and simpler installation. Improved operator safety – securing the material reduces the risk of panel movement and uncontrolled shifting during cutting. Reduced material waste – stable positioning eliminates cutting errors and reduces the amount of waste. Higher edge quality – with no material vibration or movement, cuts are clean and free from burrs and fraying. Construction and Technology The hold-down beam is made of a durable steel profile, ensuring long service life and resistance to deformation. The pneumatic cylinders are arranged in two independent sections, providing even pressure along the entire length of the material being cut. The separation of the pressure zones makes it possible to adjust the clamping force to different panel sizes and thicknesses. The entire system is designed for quick installation on most sliding table saw worktables, making it easy to integrate into existing production lines without modifying the machine's structure. Precision and Work Efficiency Using a pneumatic hold-down on a sliding table saw directly improves cutting efficiency and dimensional repeatability. Even when cutting thin or laminated panels with finished surfaces, the operator can be confident that the material will remain securely in position. This has a direct impact on the quality and appearance of the finished component. Applications The two-section hold-down for sliding table saws is suitable for: furniture manufacturing facilities specializing in cutting laminated panels and MDF, production of structural components from wood and wood-based materials, precision applications where excellent cutting quality and defect-free edges are required, workstation automation, as a component supporting serial cutting processes. Standard Equipment 3,200 mm hold-down beam 4 pneumatic cylinders (2 per section) Set of connectors for connection to the pneumatic system Mounting brackets for installation on the worktable Optional Equipment Quick-release air connection module Additional safety valve Foot control system (pneumatic pedal) Integration with the saw's control panel Technical Specifications Parameter Specification Godpfxovxtcqe Abhskd Hold-down length 3,200 mm Maximum material height 100 mm Number of cylinders 4 Operating pressure 2.0 bar

Condition: used, Year of construction: 2023, Tines10 mm x 490mm mech. blower with GW instead of blower Unscrewing button at the rear / on the appliance Warning signs with lighting nac / Gedpfotgth Njx Abhokd

Year of construction: 2017, operating hours: 3 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 2051476364, From our demonstration tool inventory, tested and fully functional: Gkjdpfev Imyusx Abhed Used Desoutter SDT035-T2200-R4Q pneumatic pistol screwdriver with ratchet clutch with trigger start Output: Hex 1/4" Torque: 1.0 to 3.5 Nm / 8.9 - 31 in.lb Idle speed: 2200 min-1 Length: 212 mm Weight: 1.1 kg Other tools for industrial production and maintenance on request.

Condition: used, color: grey-black, Year of construction: 2026, gearing type: other, TITLE: NEW, GALVANIZED, PNEUMATIC, SWAP BODY TRAILER, “DONKEY BACK” TYPE REF: 26R11 YEAR: New, to be registered AXLES: 2 WHEELBASE: 4840 mm Gksdoz R Etajpfx Abhjd MAXIMUM LENGTH: 9.05 m COUNTRY OF ORIGIN/DESTINATION: Italy PAYLOAD: 16,600 kg - TRAILER: 20,000 kg gross vehicle weight TYPE OF BODY: Swap body BODY MODEL: CBS CARGO AREA DIMENSIONS: FROM: 5.00 m + 0.20 m TO: 7.00 m + 0.20 m SUSPENSION: Pneumatic with ROR axles BRAKES: Disc brakes with EBS system TIRES: No. 9 tires 265/70 R19.5, including spare wheel ACCESSORIES: - Air locking system with 4 internal clamps with a clamping force of 52,000 kg CONDITION: New TIRE CONDITION: 100% Subject to errors and/or omissions The prices shown do not include VAT. Please contact the sales representative for an updated price and condition comparison. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA SWAP BODY TRAILERS operates in the sale and purchase of industrial and commercial vehicles, specializing mainly in the waste management sector. Specialized in trucks, trailers, and swap body equipment. With a fleet of over 50 trucks and over 150 bodies, containers, with and without cranes, available for immediate delivery. S.E.&O Given the amount of information and details provided, Aurora invites you to verify the accuracy of the data with the sales staff.

Condition: like new (used), functionality: fully functional, total height: 150 mm, jaw height: 40 mm, clamping width: 160 mm, clamping range: 200 mm, clamping length: 200 mm, - Extremely stable and robust Gkedex Rp Ekspfx Abhjd - pneumatic - barely used - 5 units available - New price over 5,000 euros

Condition: ready for operation (used), Schmidt 24-041-89 Pneumatic Press Pressing force: 9 kN Overtravel: 15 mm Two-hand operation Max. operating pressure: 9 bar Stroke: 50 mm You are welcome to arrange a viewing appointment. Godsxxaz Aspfx Abhjkd We are happy to organize cost-effective shipping for you! You will receive a proper invoice. For international customers, net invoicing is possible, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers. Stated company names and trademarks are property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the item description are possible and remain reserved.

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Gedeixqg Nepfx Abhjkd Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Driven Exit & End Conveyrors Touch Screen Digital Panel Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed

Year of construction: 2005, condition: good (used), From insolvency proceedings: Spitznas Model 512120010 Gsdpfslczd Hex Abhskd Year of manufacture unknown with SPITZNAS TENSIONING DEVICE with AUTOMATIC FEED, Model 512089940 in original case.

Condition: new, Technical data: Working width: 970 mm Grinding width: 950 mm Working height: 3 - 160 mm 1 steel aggregate 2 combination unit with shoe The shoe is pneumatically pressed Sanding belt dimensions: 970 x 2150 mm Common motor power of 2 grinding aggregates: 11 kW The speed of the feeding belt on the converter: 16-18 m / sec. Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roll diameter: 150 mm Sanding pad width: 50 mm Sanding belt speed: 18 m / s 1 unit Compressed air consumption: 20l / min Standard equipment: Mechanical oscillation of the sanding belt without the use of compressed air. ECO GEAR SYSTEM Smooth regulation of the feeding belt on the converter 4-20m / min Automatic star / delta start Steel roller on the first aggregate, rubberized on KOMBI agragata Electronic table height display Godpfog A D Anex Abhjkd Automatic reading device for gr. material and table position setting Safety switches Automatic machine switches Main engine brake Rubber pressure rollers 2-roller table at the entrance and exit In stock! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Condition: used, Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 80 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm Gkjdpfjdk I T Dex Abhed -Air inlet and outlet: adjustable -Number: 1x available -Price: per piece -Dimensions: 95/95/H345 mm -Weight: 5 kg

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DC-100-100-PPV -Piston: Ø 100 mm -Stroke: 100 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides Gkodedk I T Eopfx Abhod -Number: 1x available -Price: per piece -Dimensions: 138/H395 mm -Weight: 5.75 kg

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 50 mm -piston diameter: Ø 40 mm -piston rod: 16 mm (connection M 12 x 1.25 thread) Gkodpjb A S D Ssfx Abhjd -Total length: 215 mm -Total length extended: 265 mm -Air inlet and outlet: adjustable -Number: 6 pieces available -Price: per piece -Weight: 1.2 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 325 mm -Piston diameter: 32 mm -Piston rod: Ø 18 mm/M16x1.5 -Recording: dimensions see pictures -Price: per piece Gkedpfefw Rv Esx Abhod -Number: 2 piece -Dimensions: 530/110/H65 mm -Weight: 3,9 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Festo, standard cylinder type DNU-80-570-PPV-A -Stroke: 570 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm/M20x1,5 -Price: per piece Gkedjfw Rwxopfx Abhjd -Number: 2 Stück -Dimensions: 840/95/H95 mm -Weight: 7,6 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Martonair type RM/8125 B -Stroke: 500 mm Gedpfx Aofxbgijbhjkd -Piston: Ø 125 mm -Piston rod: Ø 32 mm -Pressure: max. 16 bar -Dimensions: 880/140/140 mm -Weight: 23 kg

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams Gkjdpofxbgmjfx Abhed -Manufacturer: Martonair type RM/8125B/M -Stroke: 320 mm -Piston: Ø 125 mm -Piston rod: Ø 32 mm -Pressure: max. 16 bar -Dimensions: see drawing in the pictures -Dimensions: 835/142/H150 mm -Weight: 20 kg