Used Pneumatic Bandfeeder for sale (7,488)

Condition: used, Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 300 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Dimensions: 467/53/H53 mm -Weight: 2.25 kg Gkjdpfx Aefbmbcjbhsd

Condition: good (used), Year of construction: 2015, functionality: unexamined, - Total stroke: 300 mm Gkjdpfxjwxvwij Abhsd - Maximum press force: 68.9 kN - Power: 0.3 kW - Min/max air pressure: 3 - 6 bar - Machine weight: 1250 kg

Condition: used, Pneumatic valves from GEA, Alfa Laval, and APV (10 pallets). Approximately 150–170 pieces. Two pallets with Alfa Laval valve control heads. One pallet with unused valves. Gkjdpsyk Hlysfx Abhod

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Gkjdpfjyqr Sxsx Abhod

Condition: used, diameter of piston 0 0 stroke length max. 0 0 Gkedpfx Aod Ig Uvobhsd 2 boards with hydraulic and pneumatic spareparts from Rexroth, Parker, Vickers, Festo, Wabco and Orsta! Without board, only sparepars! partially unused! Detailed pictures can be supplied.

Condition: good (used), Year of construction: 1999, Pneumatic press, manufacturer: SCHMIDT, type: ZHS-2/22, year of manufacture: 1999. Two-hand operation. UVV certification valid until 2023. Gedpfxjiduvcs Abhjkd

Condition: used, Year of construction: 1999, machine/vehicle number: 9093548, functionality: fully functional, Pneumatic press 63 tons Godpfxoyzhvps Abhskd

Year of construction: 2011, condition: excellent (used), 2 pneumatic shelf presses for edging and veneering. Type PNP Working area: 1250x2500 mm Weight: 1940 kg Presses are fully operational and in use. For any questions, please contact: Piotr Żołnierczyk - 606 666 023 Gedey Avb Ajpfx Abhokd

Condition: used, Year of construction: 1987, functionality: fully functional, overall weight: 5,000 kg, total width: 960 mm, total length: 1,860 mm, total height: 2,160 mm, Pneumatic Forging Hammer MA4132 – 160 kg Heavy-duty pneumatic forging hammer, believed to be model MA4132, manufactured in the USSR. The machine is complete with separate anvil/base and electric motor. Technical data: Falling parts weight: approx. 160 kg Main machine weight: approx. 3,700 kg Anvil/base weight: approx. 1,000 kg Electric motor weight: approx. 300 kg Total weight: approx. 5,000 kg Motor power: approx. 15 kW* Year of manufacture: believed to be 1987* Serial/identification marking on the machine: “87 №149” Location: Estonia Solid, heavy industrial forging hammer suitable for blacksmithing and forging work. The machine is sold as shown in the photos. Loading can be arranged by agreement. Godezxd E Sjpfx Abhokd Inspection is possible by appointment. More photos and video available on request. *Some technical specifications and year of manufacture are based on identification of the machine as MA4132 and should be considered approximate.

Condition: good (used), Manufacturer: unknown Type press: P 14 (?) Gsdpjrt Immefx Abhokd Type: Table mounting press Dimensions: 150 x 220 x 750 mm Table dimensions: 1,500 x 700 x 820 mm Weight: approx. 80 kg

Condition: used, Year of construction: 1999, cutting height (max.): 210 mm, cutting width (max.): 460 mm, PNEUMATIC ADJUSTABLE CHAINSAW: Brand: STROMAB Type (Model): PS 600/P Serial No.: 990460 Year: 1999 Gjdpsrx Tatjfx Abhokd MAKING CAPACITIES: - Maximum wood cross-section: 210 x 460 mm (thickness x width) - Adjustable arm (pivot): -45 to +40° - Cutting capacity pivoted at 45°: 210 x 325 mm max FEATURES: - CE marked - Pneumatic front arm feed - Lockable disconnect switch, push-button stops - Main power supply: 380V Three-phase 50 Hz - Saw motor power: 7.5 kW (10 hp) IN 16.5 A - Blade speed: 2800 rpm - Saw blade: Ø 590-600 mm Bore: Ø 30 mm, Ø 4.2 mm thick - Table height (working height): 880 mm - Main wooden table: 1100 x 710 mm, with 2 pneumatic pressure gauges - Pneumatic power supply: 6 bar Estimated consumption: 28 nl - Extraction inlet: Ø 150 mm Recommended flow rate: 1350 m3/h, 20 m² Dimensions: 1700 x 1500 x h. 1900 mm Weight: 630 kg Please contact us for the supply of consumables, accessories, and/or extraction systems. Machine offered without any special servicing required

Condition: excellent (used), Year of manufacture: 2007 The set includes: 1. Pneumatic press Manufacturer: Schmidt Type: 24 Pressing force: 9 kN Two-hand control (two-hand release) 2. Strip guide for stamping / embossing Manufacturer: SAEP Type: HSG 3. Control system Manufacturer: Siemens Type: Simatic Panel Gkjdpfsx Eiuxox Abhod 4. Additional equipment Magnifying lamp Worktable Ergonomic safety work chair

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams Godpfxsd Twhlj Abhskd -Stroke: 25 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Dimensions: 272/65/H65 mm -Weight: 2.05 kg

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams, short-stroke cylinders -Stroke: 50 mm -Piston diameter: 50 mm -Piston rod: 20 mm Gkodpfx Abed Txg Tehsd -Price: per piece -Number: 2 pieces -Dimensions: 345/65/H65 mm -Weight: 2.05 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 80 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 7 pieces -Dimensions: 230/46/H46 mm -Weight: 0.7 kg/piece Gksdped Ty Ahofx Abhed

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 500 mm -Piston diameter: 80 mm -Piston rod: 25 mm -Price: per piece -Number: 2 pieces -Dimensions: 725/95/H95 mm Godpfx Aefa Sc Hobhokd -Weight: 9.25 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams Gksdefa S N Iepfx Abhed -Stroke: 150 mm -Piston diameter: 63 mm -Piston rod: 20 mm -Thread intake: M16 -Air inlet and outlet: adjustable -Price: per piece -Number: 2 pieces -Dimensions: 405/75/H75 mm -Weight: 3.6 kg/piece

Condition: used, Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 40 mm Gkedpfxsfbclls Abhjd -Piston diameter: 50 mm -Piston rod: 16 mm -Price: per piece -Number: 4 pieces -Dimensions: 96/68/H68 mm -Weight: 0.9 kg/piece

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Topslide: PA59220-0125 -Stroke: 125 mm -Piston diameter: 40 mm Gjdpofbhz Njfx Abhjkd -Piston rod: 16 mm -Price: per piece -Number: 3 pieces -Dimensions: 290/55/H55 mm -Weight: 1.25 kg

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -ORIGA: PA60210-0050 -Stroke: 50 mm Gsdpefbh Absfx Abhskd -Piston diameter: 50 mm -Piston rod: 20 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 54 x 230 mm -Weight: 1.05 kg/piece

Condition: used, Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 100 mm Gsdpjfbmbfofx Abhekd -Piston diameter: 50 mm -Piston rod: 20 mm -Dimensions: 265/65/H65 mm -Weight: 1.7 kg

Condition: used, Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 353 mm -Piston rod: 25 mm -Dimensions: 575/95/H95 mm -Weight: 7.65 kg Gkjdpfx Asfbmbksbhed

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 150 mm -Piston diameter: 50 mm -Piston rod: 18 mm -Price: per piece -Number: 10 pieces -Dimensions: 330/65/H65 mm -Weight: 2.15 kg/piece Gjdpfjfbmu Hsx Abhskd

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 250 mm Gjdpfx Abefbnkaehskd -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimensions: 410/55/H55 mm -Weight: 1.5 kg/piece

Year of construction: 2001, condition: like new (used), functionality: fully functional, machine/vehicle number: 1382434, From our demonstration tool inventory, tested and fully functional: new Desoutter D315-S-1050 compressed air 45° angle drill with trigger start Gkodpsv Inwzefx Abhjd Power: 280 W Torque: 10 Nm Idle speed: 1050 min-1 Length: 280 mm Weight: 0.84 kg Other tools for industrial production and maintenance on request.