Used Pneumatic Bandfeeder for sale (7,487)

Condition: used, Pneumatic cylinder, air cylinder, pneumatic piston, standard cylinder, clamping cylinder, short stroke cylinder -Pneumatic cylinder: double-acting, stroke 80 mm -Type: PA62090-0080 SZ6080/80 -Piston rod: Ø 25 mm / M16 -Pmax: 10 bar Gsdpfjtr R Apox An Ejui -Number: 5x cylinders available -Price per piece -Dimensions: 150/95/H130 mm -Weight: 2.3 kg/piece

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Camozzi, pneumatic cylinder type 25N2A25A690 -Stroke: 690 mm Guedpfxetxkvxj An Eji -Piston: Ø 25 mm -Piston rod: Ø 10 mm / M10 x 1.25 -Number: 2x cylinders available -Price per piece -Dimensions: Ø 27 x 835 mm -Weight: 1.0 kg/piece

Condition: good (used), Year of construction: 2007, I sell the automatic pneumatic end cutting saw OMGA T521, year 2007. Input table automatic feeding 5,10m (pusher system) Outut table 1,50m Total length: 8,00m Optimising with automatic cutting sequence modes. Available immediately. Gusdpfx Anevxu Rpj Eji CE version. Documentation included.

Year of construction: 2019, condition: excellent (used), load capacity : max 360 kg Extendable : 700 mm x 1400 mm Godpepu D Dzsfx An Esui Angle of rotation around longitudinal pivot : 360`

Condition: new, Year of construction: 2026, functionality: fully functional, Pneumatic Hold-Down for a Sliding Table Saw – Essential Equipment for Maximum Material Stability A pneumatic hold-down for a sliding table saw is an essential piece of equipment for facilities that require maximum stabilization of the material being cut. The two-section model with a length of 3,200 mm ensures secure and even pressure against the worktable, eliminating problems commonly associated with working without a hold-down – chipping, material waste, and inaccurate cuts. Key Advantages Pneumatic hold-down with two independent sections – each equipped with two cylinders, allowing flexible control of the pressure applied to different areas of the table. Extended 3,200 mm beam – provides full coverage of a typical sliding table saw table length and is ideal for processing large-format panels. Optimal working force at low pressure – effective operation from just 2.0 bar, resulting in lower energy consumption and simpler installation. Improved operator safety – securing the material reduces the risk of panel movement and uncontrolled shifting during cutting. Reduced material waste – stable positioning eliminates cutting errors and reduces the amount of waste. Higher edge quality – with no material vibration or movement, cuts are clean and free from burrs and fraying. Construction and Technology The hold-down beam is made of a durable steel profile, ensuring long service life and resistance to deformation. The pneumatic cylinders are arranged in two independent sections, providing even pressure along the entire length of the material being cut. The separation of the pressure zones makes it possible to adjust the clamping force to different panel sizes and thicknesses. The entire system is designed for quick installation on most sliding table saw worktables, making it easy to integrate into existing production lines without modifying the machine's structure. Precision and Work Efficiency Using a pneumatic hold-down on a sliding table saw directly improves cutting efficiency and dimensional repeatability. Even when cutting thin or laminated panels with finished surfaces, the operator can be confident that the material will remain securely in position. This has a direct impact on the quality and appearance of the finished component. Applications The two-section hold-down for sliding table saws is suitable for: Gusdpfxjvxtcqe An Eoi furniture manufacturing facilities specializing in cutting laminated panels and MDF, production of structural components from wood and wood-based materials, precision applications where excellent cutting quality and defect-free edges are required, workstation automation, as a component supporting serial cutting processes. Standard Equipment 3,200 mm hold-down beam 4 pneumatic cylinders (2 per section) Set of connectors for connection to the pneumatic system Mounting brackets for installation on the worktable Optional Equipment Quick-release air connection module Additional safety valve Foot control system (pneumatic pedal) Integration with the saw's control panel Technical Specifications Parameter Specification Hold-down length 3,200 mm Maximum material height 100 mm Number of cylinders 4 Operating pressure 2.0 bar

Year of construction: 2017, operating hours: 3 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 2051476364, From our demonstration tool inventory, tested and fully functional: Used Desoutter SDT035-T2200-R4Q pneumatic pistol screwdriver with ratchet clutch with trigger start Output: Hex 1/4" Torque: 1.0 to 3.5 Nm / 8.9 - 31 in.lb Idle speed: 2200 min-1 Length: 212 mm Weight: 1.1 kg Gusdpev Imyujfx An Esi Other tools for industrial production and maintenance on request.

Condition: used, color: grey-black, Year of construction: 2026, gearing type: other, TITLE: NEW, GALVANIZED, PNEUMATIC, SWAP BODY TRAILER, “DONKEY BACK” TYPE REF: 26R11 YEAR: New, to be registered AXLES: 2 WHEELBASE: 4840 mm MAXIMUM LENGTH: 9.05 m COUNTRY OF ORIGIN/DESTINATION: Italy PAYLOAD: 16,600 kg - TRAILER: 20,000 kg gross vehicle weight TYPE OF BODY: Swap body BODY MODEL: CBS CARGO AREA DIMENSIONS: FROM: 5.00 m + 0.20 m TO: 7.00 m + 0.20 m SUSPENSION: Pneumatic with ROR axles BRAKES: Disc brakes with EBS system TIRES: No. 9 tires 265/70 R19.5, including spare wheel ACCESSORIES: - Air locking system with 4 internal clamps with a clamping force of 52,000 kg Godpfx Ajz R Etaen Ejui CONDITION: New TIRE CONDITION: 100% Subject to errors and/or omissions The prices shown do not include VAT. Please contact the sales representative for an updated price and condition comparison. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA SWAP BODY TRAILERS operates in the sale and purchase of industrial and commercial vehicles, specializing mainly in the waste management sector. Specialized in trucks, trailers, and swap body equipment. With a fleet of over 50 trucks and over 150 bodies, containers, with and without cranes, available for immediate delivery. S.E.&O Given the amount of information and details provided, Aurora invites you to verify the accuracy of the data with the sales staff.

Condition: like new (used), functionality: fully functional, total height: 150 mm, jaw height: 40 mm, clamping width: 160 mm, clamping range: 200 mm, clamping length: 200 mm, - Extremely stable and robust Gedpfx Ansx Rp Ekj Eoui - pneumatic - barely used - 5 units available - New price over 5,000 euros

Condition: ready for operation (used), Schmidt 24-041-89 Pneumatic Press Pressing force: 9 kN Overtravel: 15 mm Two-hand operation Max. operating pressure: 9 bar Stroke: 50 mm You are welcome to arrange a viewing appointment. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. For international customers, net invoicing is possible, provided you have a valid VAT ID number. Subject to prior sale. Guodpfxoxxaz Ae An Eoi Visit our shop and check out our other offers. Stated company names and trademarks are property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the item description are possible and remain reserved.

Year of construction: 2005, condition: good (used), From insolvency proceedings: Spitznas Model 512120010 Year of manufacture unknown with SPITZNAS TENSIONING DEVICE with AUTOMATIC FEED, Model 512089940 in original case. Gjdpfx Aolczd Hsn Eeui

Condition: new, Technical data: Working width: 970 mm Grinding width: 950 mm Working height: 3 - 160 mm 1 steel aggregate 2 combination unit with shoe The shoe is pneumatically pressed Gujdpfxeg A D Ano An Eji Sanding belt dimensions: 970 x 2150 mm Common motor power of 2 grinding aggregates: 11 kW The speed of the feeding belt on the converter: 16-18 m / sec. Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roll diameter: 150 mm Sanding pad width: 50 mm Sanding belt speed: 18 m / s 1 unit Compressed air consumption: 20l / min Standard equipment: Mechanical oscillation of the sanding belt without the use of compressed air. ECO GEAR SYSTEM Smooth regulation of the feeding belt on the converter 4-20m / min Automatic star / delta start Steel roller on the first aggregate, rubberized on KOMBI agragata Electronic table height display Automatic reading device for gr. material and table position setting Safety switches Automatic machine switches Main engine brake Rubber pressure rollers 2-roller table at the entrance and exit In stock! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Condition: used, Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 80 mm Guodpfxjdk I T De An Eji -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Air inlet and outlet: adjustable -Number: 1x available -Price: per piece -Dimensions: 95/95/H345 mm -Weight: 5 kg

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DC-100-100-PPV -Piston: Ø 100 mm -Stroke: 100 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Number: 1x available -Price: per piece Gujdpfxedk I T Ee An Eei -Dimensions: 138/H395 mm -Weight: 5.75 kg

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams Gsdob A S D Sopfx An Eoui -Stroke: 50 mm -piston diameter: Ø 40 mm -piston rod: 16 mm (connection M 12 x 1.25 thread) -Total length: 215 mm -Total length extended: 265 mm -Air inlet and outlet: adjustable -Number: 6 pieces available -Price: per piece -Weight: 1.2 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 325 mm -Piston diameter: 32 mm Gedpfx Ajfw Rv Esn Ejui -Piston rod: Ø 18 mm/M16x1.5 -Recording: dimensions see pictures -Price: per piece -Number: 2 piece -Dimensions: 530/110/H65 mm -Weight: 3,9 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Festo, standard cylinder type DNU-80-570-PPV-A -Stroke: 570 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm/M20x1,5 -Price: per piece -Number: 2 Stück -Dimensions: 840/95/H95 mm Godpefw Rwxsfx An Eoui -Weight: 7,6 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Martonair type RM/8125 B -Stroke: 500 mm -Piston: Ø 125 mm -Piston rod: Ø 32 mm -Pressure: max. 16 bar Godpfx Aofxbgion Ejui -Dimensions: 880/140/140 mm -Weight: 23 kg

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Martonair type RM/8125B/M -Stroke: 320 mm -Piston: Ø 125 mm -Piston rod: Ø 32 mm -Pressure: max. 16 bar -Dimensions: see drawing in the pictures -Dimensions: 835/142/H150 mm Gsdpfx Aefxbgmen Eeui -Weight: 20 kg

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders Gedjd S Aqaepfx An Esui -Mecman type: 167-05 5000-1 -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Stroke: 160 mm -Dimensions: 95/95/H515 mm -Weight: 4.5 kg

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, stopper cylinders Guedpfxofm A Uqo An Esi -Manufacturer: Parker, stopper cylinder -Type: STVD-50-30-STD -Stroke: 25 mm -Piston: Ø 50 mm -Piston rod: Ø 32 mm -Dimensions: 185/112/H95 mm -Weight: 1.80 kg

Condition: used, Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 500 mm -Piston rod: Ø 20 mm Guedpfod Rz Dzex An Eei -Number: 2 pieces available -Price: per piece -Dimensions: 685/65/H65 mm -Weight: 4.2 kg

Condition: used, Clamping plate with pneumatic cylinder, centering table, centering device, plate field, welding table, welding table, plate boring machine -Clamping plate with: 24 pneumatic cylinders -Material: aluminum -Width: 775 mm -Table length: 1600 mm -Height: 180 mm Guodpfxsd Sacno An Eoi -Dimensions: 1600/775/H180 mm -Weight: 250 kg

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 80 mm -Piston diameter: 63 mm -piston rod: 20 mm (connection: M16 x1.25 thread) -Air inlet and outlet: adjustable -Price: per piece -Number: 2 pieces Gedpfx Ansd Twhhs Esui -Dimensions: 270/75/H75 mm -Weight: 2.6 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams Gujdped Twhiofx An Eji -Stroke: 26 mm -Piston diameter: 63 mm -piston rod: 20 mm (connection: M16 x1.25 thread) -Dimensions: 225/75/H75 mm -Weight: 1.95 kg

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 200 mm Gsdpfxsd Txgxs An Ejui -Piston diameter: 63 mm -Piston rod: 20 mm (connection: M16 x1.5 thread) -Dimensions: 400/75/H75 mm -Weight: 2.55 kg