Used Pneumatic Bandfeeder for sale (6,920)

Condition: good (used), machine/vehicle number: Code: 0168, Code: 0168 Brand: STROMAB Model: ST 3000 - CE Standard Rotating pneumatic clamping machine, suitable for planks in general, squared timbers, strips for forming panels, table tops, steps for stairs and coffin - CE Standard Kfodpfx Ael Snzvjgzea Motorized rotation with release pedal and handy control wheel for worktable rotation Working capacity 3000 x 1200 mm Nr. 9 pneumatic front pressers ( 3 each side) Nr. 18 vertical columns with cylinder, diameter 80 mm ( 6 each side) Nr. 3 Working stations Thrust of vertical cylinder 8 bar kg 400 Daily output (8 hours) m2 263 Mechanical safety barriers Overall dimensions : mm 4800 x 2850 x 2300 Weight kg 1100

Condition: new, functionality: fully functional, mileage: 22 km, power: 426.59 kW (580.00 HP), fuel type: diesel, wheelbase: 3,790 mm, fuel: diesel, brakes: intarder, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, airbag, navigation system, onboard computer, parking heater, spoiler, Iveco Stralis S-Way 580 Brand new, ready for initial registration - Full air suspension - Retarder: Intarder - 0 km - Stationary air conditioning - Twin bunk beds - Navigation system - Alloy wheels - Mirror cam Kodoxwbbzjpfx Agzjfa CUSTOMIZED FINANCING OR LEASING OPTIONS AVAILABLE ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. CONTACTS: 0823 1686306 335 6713062 - 377 7064530 OPENING HOURS: MONDAY-FRIDAY: 8:30 AM - 7:00 PM | SATURDAY: 8:30 AM - 2:00 PM WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL & INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500 – V8 – 650 – 580 – 730 – S500 – Stralis – Man – Nissan V8 – Intarder – 770s – Limited Edition – 660 S – Semi-trailer – Refrigerated tipper semi-trailer – Lamberet – Schmitz – Isuzu – Fixed body – Crane – Tipper – 4 axles – Rear four axles – Tway – T-Way – 540 – 460 HP – Xway – X-Way – Three-way tipper – V8 – Scania – Frost Edition – Box truck – Tail-lift – Refrigerated cell – Insulated with fridge – Panel van Domenico Truck srl disclaims any liability for possible discrepancies regarding the technical specifications, options, and features that may, in some cases, differ from those stated in the description. We invite you to verify the features of the specific vehicle.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, We have been manufacturing pneumatic conveyors for over 20 years, designed for the transport of bulk materials such as seeds, grain, peas, corn, the conveying of wood pellets (such as pellet, sawdust), plastic granules, sand, abrasive powders (including even corundum), and steel fibre reinforcement for concrete mixers or within batching facilities, among others. Kfsdew Aqamopfx Agzea Our systems can also be used for aerating a variety of materials, including hay, cereals, herbs, and more. They are ideal for providing fresh air to production halls, poultry houses, and cowsheds, as well as for extracting smoke, dust, and hazardous welding fumes. Flexible hose systems can also be used as needed. Key specifications: - High performance blower with 5.5 kW/400V motor - Robust, modular steel construction; pipes and bends made from 3.6 mm thick steel, enabling transport of even the most challenging materials while ensuring long service life - We also supply light and heavy flexible hoses for the above-mentioned materials - Easily transports material over long distances (distance depends on the material type) - High blower output ensures capability for both horizontal and vertical transport - Extensive experience in production, with machine segments bolted with M8 screws for easy replacement and versatile use On request, we can produce parts or the entire unit in a STAINLESS STEEL version (including pipes), or in galvanized finish. We apply the Kaizen method in production—Kaizen, meaning 'change for the better', is a management philosophy emphasizing continuous process and operational improvement. REPLIES ARE BEST SENT VIA E-MAIL In the standard version we sell only the blower with a flanged outlet to accommodate various pipe connections. We manufacture pipes and bends from 3.6 mm thick steel. Impeller speed: 2,800 rpm. (OPTION: with extensive electronic speed regulation, available from stock). The use of three-phase motor speed controllers offers multiple benefits, including energy savings, precise torque control, and improved overall system efficiency. Additionally, they reduce energy losses, positively impacting production performance. Our blowers are highly efficient. The machine is built from easily replaceable modular segments (joined by M8 bolts), which we always keep in stock, enabling versatile applications. All individual modules are also available separately (e.g., the blower only). We can adapt the construction to meet customer requirements. The blower is easy to transport—one person can easily move it, and it can be transported even by a small car, van, or trailer. Assembly and operation are straightforward. We also produce optional wheels to facilitate moving the unit (two types available). Net prices: - Basic set (without electronic speed control): 10,300 PLN (EUR 2,453) - With electronic speed control: 13,400 PLN (EUR 3,190) - Blower only, without feed hopper: 10,300 PLN (EUR 2,452) - Galvanized air splitter (2 pipe inlets/outlets, with flanges and fixing holes): 1,900 PLN (EUR 452) - Galvanized air splitter (3 pipe inlets/outlets, with flanges and fixing holes): 2,400 PLN (EUR 571) - Additional wide-range electronic speed controller: 2,900 PLN (EUR 690) For more information, please contact us by e-mail. We operate 24/7.

Condition: used, Pneumatic pick & place manipulator, loading unit similar to SCARA robot. Handling device, handling system, placement gripper, loading gripper for automation. Horizontal axis with guided cylinder linear module type CLM 100-H100 (GEMOTEC column module). Vertical axis with guided cylinder linear module type CLM 100-H50 (GEMOTEC column module). Payload: max. 2 kg Horizontal stroke: 100 mm (pneumatic) Vertical stroke: 50 mm (pneumatic) Vertical adjustment on both support columns: 330 mm (manual, with clamping) Support columns, vertical guide column: Ø 55 mm Mounting base: 175 x 90 mm - Pneumatically traversable in two axes with precise linear guidance - End position dampers - Mounting plate for tool attachment 55 x 65 mm Required space (L x W x H): 320 x 170 x 550 mm Net weight: 16 kg Very good condition Ksdpoxf Ur Aofx Agzofa Various manipulators available, see our webshop.

Condition: new, Technical data: Working width: 970 mm Grinding width: 950 mm Working height: 3 - 160 mm 1 steel aggregate 2 combination unit with shoe The shoe is pneumatically pressed Sanding belt dimensions: 970 x 2150 mm Common motor power of 2 grinding aggregates: 11 kW The speed of the feeding belt on the converter: 16-18 m / sec. Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Kfedpeg A D Anjfx Agzja Sanding roll diameter: 150 mm Sanding pad width: 50 mm Sanding belt speed: 18 m / s 1 unit Compressed air consumption: 20l / min Standard equipment: Mechanical oscillation of the sanding belt without the use of compressed air. ECO GEAR SYSTEM Smooth regulation of the feeding belt on the converter 4-20m / min Automatic star / delta start Steel roller on the first aggregate, rubberized on KOMBI agragata Electronic table height display Automatic reading device for gr. material and table position setting Safety switches Automatic machine switches Main engine brake Rubber pressure rollers 2-roller table at the entrance and exit In stock! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Condition: used, functionality: unexamined, machine/vehicle number: SAF 30NC, Used AMG-PESCH SAF 30NC pneumatic actuator with valve Manufacturer: AMG-PESCH GmbH Model: SAF 30NC With Festo vsnc-fc-m52-md-n14-f8 “solenoid valve” Kfodpfx Agsxp H Evezea For sale per set

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, max cutting height 70mm motor 2,2kW pneumatic drive Kfsdpfxjqwdxbj Agzea

Condition: new, functionality: fully functional, mileage: 22 km, power: 426.59 kW (580.00 HP), fuel type: diesel, wheelbase: 3,790 mm, fuel: diesel, brakes: intarder, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, airbag, navigation system, onboard computer, parking heater, spoiler, Iveco Stralis S-Way 580 Brand new, ready for initial registration - Full air suspension - Retarder: Intarder - 0 km - Stationary air conditioning - Twin bunk beds Kjdpfx Asxvtbksgzsfa - Navigation system - Alloy wheels - Mirror cam CUSTOMIZED FINANCING OR LEASING OPTIONS AVAILABLE ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. CONTACTS: 0823 1686306 335 6713062 - 377 7064530 OPENING HOURS: MONDAY-FRIDAY: 8:30 AM - 7:00 PM | SATURDAY: 8:30 AM - 2:00 PM WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL & INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500 – V8 – 650 – 580 – 730 – S500 – Stralis – Man – Nissan V8 – Intarder – 770s – Limited Edition – 660 S – Semi-trailer – Refrigerated tipper semi-trailer – Lamberet – Schmitz – Isuzu – Fixed body – Crane – Tipper – 4 axles – Rear four axles – Tway – T-Way – 540 – 460 HP – Xway – X-Way – Three-way tipper – V8 – Scania – Frost Edition – Box truck – Tail-lift – Refrigerated cell – Insulated with fridge – Panel van Domenico Truck srl disclaims any liability for possible discrepancies regarding the technical specifications, options, and features that may, in some cases, differ from those stated in the description. We invite you to verify the features of the specific vehicle.

Condition: good (used), Year of construction: 2022, I sell the automatic pneumatic end cutting saw Salvamac Salvapush 2000, year 2022. Kfodpevxbmwefx Agzea Input table automatic feeding 6,10m (pusher system) Outut table 3,00m Total length: 10,50m Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. Kjdjxf Up Uepfx Agzjfa The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: new, Technical data: Kedpfx Agjgtm U Aszjfa Working width: 1100 mm Sanding belt dimensions: 1120x2150 mm Max working height: 160 mm Calibrating steel roller with a diameter of 150 mm Rubber roller with a diameter of 150 mm Sanding pad width: 50 mm Common motor power of 2 grinding aggregates: 11 Kw Speed of sanding belts: 16/18 m / s. Feed motor power: 0.55 kW Infinitely adjustable feeding belt: 4-20 m / min Worktable motor power: 0.25 Kw Pneumatic shoe for jump / jump: YES

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Leibfried, pneumatic cylinder double-acting type L 81 .: 43 881 Stroke: 110 mm Kfjdpfexay Ulsx Agzja -Piston rod: Ø 18 mm -Max. pressure: 10 bar -Quantity: 2 pieces available -Price: per piece -Dimensions: 267/80/H70 mm -Weight: 2.1 kg/piece

Condition: like new (used), functionality: fully functional, mileage: 325,275 km, power: 485.43 kW (660.00 HP), first registration: 03/2023, fuel type: diesel, fuel: diesel, brakes: retarder, color: white, gearing type: automatic, suspension: air, Equipment: ABS, onboard computer, spoiler, SCANIA 660 S V8 FULL AIR SUSPENSION 2+2 - First registration: 03/2023 - 325,275 km - Full pneumatic suspension - Retarder - Double bunk beds - Stationary air conditioning - LED headlights - Navigation system - V8 leather interior - Refrigerator - Alloy wheels CUSTOMIZED FINANCING OR LEASING OPTIONS AVAILABLE ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL, NAPLES BRANCH DOMENICO ESPOSITO S.P.A., EBOLI (SA) BRANCH - AUTHORIZED DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS Kfjdpfjxvtamex Agzsa CONTACTS: 0823 1686306 335 6713062 - 377 7064530 OFFICE HOURS: MONDAY-FRIDAY 8:30 AM / 7:00 PM - SATURDAY 8:30 AM / 2:00 PM WE OFFER A WIDE CHOICE OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes-Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man – Nissan V8 – Intarder – 770s – Limited Edition – 660 S Semi-trailer – Refrigerated Semi-trailer – Lamberet – Schmitz – Isuzu – Fixed body – Crane – Tipper – 4 axles – Rear 4 Axles – Tway-T-Way-540-460 HP – Xway-X-Way-Three-way tipper – V8 – Scania – Frost Edition Curtain Sider – Boxbody – Tail-lift – Refrigerated cell – Insulated with refrigeration unit – Van Domenico Truck srl declines any responsibility for potential discrepancies in technical specifications, options, and features that may, in some cases, differ from those listed in the description. Please verify the specifications of the specific vehicle.

Condition: good (used), Year of construction: 2007, I sell the automatic pneumatic end cutting saw OMGA T521, year 2007. Input table automatic feeding 5,10m (pusher system) Outut table 1,50m Total length: 8,00m Optimising with automatic cutting sequence modes. Available immediately. CE version. Documentation included. Kodpfsvxu Rpox Agzjfa

Condition: used, Pneumohydraulic cylinder TOX Pressotechnik Hydro-pneumatic press, power pack Type: S 04.00.050.12 D No.: 208696.460 Year of manufacture approx. 2000 Pressure capacity: 4.0 tons at 10 bar Pressure capacity: 3.0 tons at 8 bar Pressure capacity: 2.6 tons at 7 bar Pressure capacity: 2.4 tons at 6 bar Pressure capacity: 2.0 ton. at 5 bar Pressure capacity: 1.6 ton. at 4 bar Pressure capacity: 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Kedpfxju D Tz Ue Agzefa Thread for piston rod: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 - Height only power pack with piston rod = 610 mm - Height of power pack hydropneumatic cylinder only = 560 mm - Additional base plate 160 x 160 x 20 mm - Plunger plate: Ø 68 mm Space requirement L x W x H: 160 x 160 x 660 mm Weight: 21 kg Very good condition 3 pieces available, price per piece

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Festo, standard cylinder double-acting type DNN-63-25-PPV-A -Stroke: 25 mm -Piston: Ø 63 mm Kfjdsxay Raepfx Agzea -Piston rod: Ø 20 mm -Hole: Ø 16 mm -Max. pressure: 12 bar -Quantity: 2 pieces available -Price: per piece -Dimensions: 265/80/H130 mm -Weight: 2.4 kg/piece

Condition: like new (used), functionality: fully functional, mileage: 473,338 km, power: 433.94 kW (589.99 HP), first registration: 12/2021, fuel type: diesel, fuel: diesel, brakes: retarder, color: white, gearing type: automatic, SCANIA S 590 FULL AIR SUSPENSION 2+2 First registration: 12/2021 Mileage: 473,338 km - Full air suspension - Retarder - Twin bunks - Stationary air conditioning - LED headlights Kfjdpfx Agjxvd Riezea - Navigation system - Full body paint - V8 leather interior - Refrigerator - Alloy wheels CUSTOMIZED FINANCING OR LEASING OPTIONS AVAILABLE ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OUR GROUP'S OTHER LOCATIONS: DOMENICO TRUCK SRL - NAPLES BRANCH DOMENICO ESPOSITO S.P.A. - EBOLI (SA) BRANCH – OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS CONTACTS: 0823 1686306 335 6713062 – 377 7064530 OPENING HOURS: MONDAY—FRIDAY 8:30–19:00 | SATURDAY 8:30–14:00 WE OFFER A LARGE SELECTION OF USED MULTIBRAND COMMERCIAL AND INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500 – V8 – 650 – 580 – 730 – S 500 – Stralis – Man – Nissan V8 – Intarder – 770s – Limited Edition – 660 S – Semi-trailer – Refrigerated semi-trailer – Lamberet – Schmitz – Isuzu – Flatbed – Crane – Tipper – 4-axle – Rear 4-axle – Tway – T-Way – 540 – 460 HP – Xway – X-Way – 3-side tipper – V8 – Scania – Frost Edition – Curtain sider – Box body – Tail-lift – Fridge cell – Insulated with fridge – Van Domenico Truck srl declines all responsibility for any discrepancies in technical specifications, options, or features, which in some cases may differ from those listed in the description. We invite you to verify the specifications of the specific vehicle.

Condition: like new (used), Year of construction: 2016, I sell the pneumatic end cutting saw Stromab TR350, year 2016. Motor power 4,0kW Saw blade diameter fi.350x30mm Kfsderzu Ugopfx Agzsa Cutting schema ver.1 max. 210x30mm Cutting schema ver.2 max. 150x80mm Input table 1,00m (possible to enlarge) Outut table 1,00m (possible to enlarge) Fence for stoppers 2,00m total length Available immediately. Condition like new. Weight 150kg.

Condition: used, Pneumatic toggle press BURGER type D04 No. 4497 Year of construction approx. 1972 Kfsdsvcdvpspfx Agzsa Compressive force max. 6 ton. Projection 150 mm ram stroke 39 mm Table size 340 x 270 mm Drop-through opening Ø 46 mm Installation height max. 160 mm Tool holder Ø 25 mm ram plate Ø 90 mm Pneumatic operating pressure 5 bar Mains connection 220 V 50 Hz - Pressure regulator for press force adjustment - stroke height adjustment 7, 21, 40 mm - electric foot switch - Table height adjustment Space requirement L x W x H 700 x 500 x 1300 mm Weight 240 kg good condition

Condition: good (used), Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp, compact cylinder, short-stroke cylinder -Manufacturer: Joyner, pneumatic cylinder type DUJ-22-60/50 -Stroke: 50 mm -Piston diameter: 60 mm Kfodpfoxayxdox Agzsa -Piston rod: Ø 16 mm -Hole: Ø 16 mm -Dimensions: 245/80/H105 mm -Weight: 1.9 kg

Condition: used, functionality: fully functional, mileage: 650,200 km, power: 566.33 kW (769.99 HP), first registration: 01/2021, fuel type: diesel, brakes: retarder, color: white, gearing type: automatic, suspension: air, Equipment: ABS, SCANIA 770 S FULL PNEUMATIC SYSTEM AVAILABLE FOR IMMEDIATE DELIVERY -Full pneumatic suspension -Retarder -Mileage: 650,200 km -Parking air conditioning -Navigation system -V8 leather interior -Alloy wheels TAILORED FINANCING OR LEASING PLANS AVAILABLE ON SITE From 24 up to 96 installments, also with zero down payment. Kfodpfxjxu Nk Se Agzea OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL NAPLES BRANCH DOMENICO ESPOSITO S.P.A. EBOLI (SA) BRANCH – OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS CONTACTS: 0823 1686306 335 6713062 – 377 7064530 BUSINESS HOURS: MONDAY-FRIDAY 8:30 am – 7:00 pm SATURDAY 8:30 am – 2:00 pm WE OFFER A WIDE RANGE OF MULTI-BRAND USED COMMERCIAL AND INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man – Nissan V8 – Intarder – 770s – Limited Edition – 660 S – Semi-trailer – Refrigerated Semi-trailer – Lamberet – Schmitz – Isuzu – Fixed platform – Crane – Tipper – 4 axles – Rear 4 axles – Tway – T-Way – 540 – 460 HP – Xway – X-Way – Three-way tipper – V8 – Scania – Frost Edition Curtainsider – Box body – Tail-lift – Refrigerated cell – Insulated with refrigeration unit – Van Domenico Truck srl accepts no liability for any discrepancies regarding technical specifications, options, or features that may, in some cases, differ from those listed in the description. We kindly invite you to verify the specific characteristics of the vehicle.

Condition: good (used), Year of construction: 2012, I sell the automatic pneumatic end cutting saw KuangYung PX60 CFS 200B, year 2012. Motor power 7,5kW Input table automatic feeding 5,10m (throughfeed system) Outut table 9,20m 5 pcs. kickers on left outfeed table Kfedpfoppwx Esx Agzoa Total length: 15,50m Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton Kfodpfstrpiisx Agzoa throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder Kjdpsxayvcsfx Agzsfa -Manufacturer: Knorr-Bremse, pneumatic cylinder type DU-80/100 -Stroke: 100 mm -Piston: Ø 80 mm -Piston rod: Ø 20 mm -Hole: Ø 18 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 315/100/H100 mm -Weight: 4.2 kg/piece

Condition: good (used), Pneumatic rivet gun, rivet nut pliers, blind rivet nut clamp, pneumatic riveting tool, blind rivet gun, blind rivet -Compressed air rivet gun -Application range: 2.0 to 4.0 mm -Dimensions: 275/80/H220 mm -Weight: 1.3 kg Kfedpfsgzhxtex Agzoa