Used Pneumatic Press for sale (17,705)

Condition: used, Year of construction: 1991, Technical details: pressure: 40 t daylight dimension : table/slide up: 450 mm throat: 375 mm Djdou Nfp Iepfx Ak Aokw ram stroke: max. 300 mm Table dimensions: 900 x 500 x 85 mm passage inside table: Ø 120 mm height over floor: 900 mm total power requirement: 15,0 kW weight of the machine ca.: 5,8 t dimension machine xH: 2,3 x 1,45 x 2,40 m further technical data: -size of the ram plate W: 900 x D: 500mm -pivot hole in ram Ø 40 x 75mm -Hydraulics: tank capacity approx. 500Liter; operating pressure 275 bar; pump capacity 22,9 l/min. Two-hand operation and/or control panel *

Condition: used, Technical details: Pressure: 2,3 t stroke: 280 mm throat: 155 mm max. ram stroke: Vorlauf: 0,08 m/sec daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: max. 355 mm clamping plate on table: 280 x 280 mm passage opening in table: Ø 100 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s Dodpfou Nfwlsx Ak Ajkw mortise hole in ram: Ø 20 x 45 mm height over floor: 725 mm total power requirement: 1,1 kW weight of the machine ca.: 0,5 kg dimension machine xH: 0,6 x 0,7 x 1,6 m Press with mechanical 2-hand operation. Pressure test up to 2,3to performed. Good condition. *

Condition: used, Year of construction: 1980, Technical details: pressure: 400 t stroke: 40 - 140 mm strokes / minute continous: 32 throat: 400 mm dayligth: min/max: 450/590 mm ram adjustment: 125 mm table-size: 1250x750 mm height over floor: 1130 mm total power requirement: ca. 31,5 kW weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m further details: - clamping plate : L x W x H : 1260 x 760 x 100mm - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D. Djdpfxeu N A Uus Ak Ajkw *

Condition: good (used), Year of construction: 1994, functionality: fully functional, pressing force: 1,000 t, table width: 1,500 mm, distance table to ram: 1,750 mm, total length: 2,700 mm, Used 1000ton hydraulic press for sale 1000TON PRESS SIDE FRAME Max TYPE CAPACITY 1000ton PRESSURE 175kgf.cm2 STROKE 1000mm DAYLIGHT 1750mm Dodpjucdgpjfx Ak Askw BOLSTER AREA 2700mm x 1500mm PULL BACK CAPACITY 52.7ton DIE CUSHION CAPACITY 50ton DIE CUSHION STROKE 180mm MAIN MOTOR 415v 50hz 6p 110kw OIL TANK CAPACITY 1800L

Condition: reconditioned (used), Overhauled and newly painted. The images are example photos of similar machines and are intended to show the design and quality of the overhaul. All wear parts are replaced. Filter cloths are new. 1-year warranty on the filter press, excluding wear parts. Plate size: 630 x 630 mm Dimensions: approx. 2000 x 1100 x 1500 mm Chamber depth: 25 mm Capacity: 210 liters Operating pressure: 12 / 15 bar Feed inlet: flange 2“, center Number of plates: 25 plates Dkodpfx Aei Igi Iek Asw Plate material: polypropylene Cloth material: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filtrate trough + drip tray in plastic. Motor hydraulics with single-acting cylinder. Optional: double-acting cylinder that retracts the heavy pressure plates. With the single-acting cylinder, the operator must manually push the pressure plates back. Optional: filling pump as a piston diaphragm pump or compressed air diaphragm pump. If the plate size, number of plates, or other features do not meet your requirements, we can offer corresponding modifications!

Condition: excellent (used), Year of construction: 2007, Used fully serviced Bystronic AFM EP 100 3metre x 100ton cnc pressbrake for sale: Model: Afm Ewards Pearson 100 Make: Bystronic Year 2007 Cybelec 880S control – popular control Working length mm: 3100mm / 3metre Max. press force kN: 1000 / 100ton Max stroke 200mm Bending cycle 1-10 mm/s Rapid approach 100mm/s Rapid return 95mm/s 2 axis back gauge – R and X axis Dkjdpfx Akjr T Eruo Aew 4 axis in total With crowning Delivery, installation and training can be arranged

Condition: excellent (used), pressing force: 100 t, table width: 3,000 mm, working length: 3,000 mm, Used high quality very clean Ursviken EKP Optima 100 3.1 / 2.55 3metre x 100ton cnc pressbrake for sale Used Ursviken cnc pressbrake for sale – Video at the bottom of the listing Pullmax Ursviken Optima EKP CNC 100 3.1/ 2.55 Press brake cnc Specifications Tonnage 100 T Folding length 3100.0 mm / 3metre CNC Cybelec DNC 7000 Control 6axis in total Complete with integrated hemming table to produce safety edges and flashings at 3metre length Dkodetwyuujpfx Ak Aew Back gauge: 2 fingers on the backstop Fully serviced. Complete with a large selection of tooling as per photographs —————- Weight 8400.0 kg State: good condition PULLMAX URSVIKEN EKP CNC 100 3.1 / 2.55 100 ton x 3100mm Downstroke 6 Axis CNC Press Brake for sale Cybelec DNC 7000 Control Guards sick Axis: y1, y2, r, x, z1 and z2 and controlled on the Cybelec control

Condition: used, Year of construction: 1981, Technical details: pressure: 250 t slide stroke: 36...126 mm Dedpfx Aou Nfklsk Aekw throat: 400 mm ram adjustment: 110 mm surface area of ram: 630 x 500 x 100 mm dayligth: 400 mm Table dimensions: 1000 x 750 x 100 mm table height over floor: 1000 mm total power requirement: 23,0 kW weight of the machine ca.: 13,5 t dimensions electric cabinet LxWxH: 1,1 x 0,7 x 1,3 m dimension machine xH: 3,0 x 1,3 x 3,3 m further details: - control via 2 hand control console or with foot pedal - foot plates Ø 220mm accessory: - column punch device *

Condition: used, Technical details: pressure: 250 t Dkodpfou N Ddwox Ak Asw stroke: Dauerlauf-Leerlauf 40 mm slide stroke: verst./adjust. 36 - 126 mm adjustability of Ram: 110 mm clamping surface ram: 630 x 500 (lxb) mm clamping surface area: 1000 x 750 x 100 mm distance table/ram: 400- 526 mm passage opening in table: 400 x 360 mm operating pressure: 0,6 MPa MPa ejector path: 63 mm throat: 400 mm total power requirement: ca. 20,0 kW dimensions electric cabinet LxWxH: 1,2x0,65x2,1 m dimension machine xH: 2,9x1,2x3,4 m - two hand control - operation panel accessory: - foot plate 2200x1500x40mm *

Condition: excellent (used), Year of construction: 1998, TYPE BRIDGE FRAME HYDRAULIC CAPACITY 20 TONS CONTROL FANUC SERIES 18P TURRET 31 STATION THICK TYPE 3 AUTO-INDEX STATIONS 19 X A 6 X B 1 X C 2 X D AUTO INDEX STATIONS 2 X B 1 X C MAX TRAVERSE (WORKING AREA) 1270 X 1270 MAX SHEET SIZE ( WITH ONE REPOSITION) 1270 X 2540 MAX SIMULTANEOUS SPEED 82 METRES PER MINUTE MAX SHEET WEIGHT 75KG MAX SHEET THICKNESS 3.2MS MAX HIT RATE 1000 HITS PER MINUTE TABLE BRUSH TYPE Djdj Affmnepfx Ak Askw WEIGHT 9.8 TONS COMPLETE WITH CHILLER NC SPECIFICATION Model of NC ... FANUC 18-P Axis ... 3 axis simultaneous Tape Code ... EIA or ISO (Automatic recognition) Programming Mode ... Absolute / incremental Min. Input ... 0.01 mm (0.010) Max. Input ... 99999.99 mm Preparatory Function ... G - 2 digit T Function ... T - 3 digit M Function ... M - 3 digit Single Block ... Yes Block Delete ... Yes Optional Stop ... Yes Editing ... Yes Manual Data Input ... Yes Memory Capacity ... 64 Kb Max. No. Of Programs ... 191 Display ... 9" Colour LCD Machine Operation ... Memory or tape Punch Interface ... RS 232 C

Year of construction: 2020, condition: new, ARTES DN150 PN100 Pneumatic Control Ball Valve – ProTACT – SAMSON 3730-3 For sale: Industrial control ball valve manufactured by ARTES Valve & Service, equipped with a ProTACT pneumatic actuator and SAMSON 3730-3 HART positioner. Complete assembly, supplied in a wooden transport crate. Valve specifications: * Manufacturer: ARTES Valve & Service * Type: Control Ball Valve 150 W * Nominal diameter: DN150 * Pressure rating: PN100 * Operating pressure: 47 bar(g) * Operating temperature: 385°C * Body material: 1.0460 * Kvs value: 230 m³/h * Opening angle: 90° * Year of manufacture: 2020 * Serial number: 3162026.1 * Tag number: 83-PCV-800 * Flanged connections Dsdpfx Ake Ahic Hs Aekw Pneumatic actuator: * Manufacturer: ProTACT GmbH * Type: PRY.B2.401S.04.2530KΦ100/ * Reference: HPY-B2-401-SRC4+HT * Supply pressure: 4–6 bar * Temperature range: −15°C to +150°C * Spring action: Clockwise (CW) * Serial number: IS-200162-1-1 Positioner: * Manufacturer: SAMSON * Model: 3730-3 * Type: HART-compatible pneumatic positioner * Input signal: 4–20 mA DC * Maximum supply pressure: 7 bar * ATEX marking * Integrated position indication and diagnostics Condition: Excellent visual condition, stored in protective packaging inside a wooden crate. Operating condition has not been independently verified. Location: Rotterdam, The Netherlands Delivery terms: EXW Rotterdam Worldwide shipping can be arranged upon request. Sold as is, where is, without warranty or returns.

Condition: new, Year of construction: 2026, Pneumatic double-diaphragm pump Cobra 40 -10 Its unique design enables operation with minimal pulsation. Consistent paint flow for a perfect spray pattern and the highest surface quality. Ideally suited for processing materials that are sensitive to shear and moisture. Minimal shear forces – ideal for processing, e.g., UV coatings. Ideal for processing small quantities of material and for frequent color changes. Scope of delivery: Basic unit on a stand, HD double hose 7.5m, upper container 5l Ex, AirCoat pistol AC 4600 Professional including red air cap and holder, Air Coat nozzle ACF 3000 11/40. Dkedpfsbuqn Hjx Ak Aow Technical data: Transmission ratio: 40:1 Volume flow per double stroke: 10 cm3 Volume flow at 200 double strokes: 2 l/min Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg Available at a special price – immediately available.

Condition: excellent (used), functionality: fully functional, Year of construction: 1995, CNC Hydraulic Press Brake Manufacturer: EHT Model: EHPS 2030 Year of manufacture: 1995 Control system: Cybelec Dkjdpfe Ahm Ibex Ak Asw Max. working width: 3050 mm Clamping force: 200 tons Main motor: 18.5 kW Back gauge: 1000 mm Bending aid 2 Multi V dies 2 sets of split tools, 260 mm high Hydraulic crowning in the table

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, input voltage: 380 V, input frequency: 50 Hz, laser power: 6,000 W, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, finger protection, fume extraction, nozzle changer, safety light barrier, Pipe Size:7500mm/24ft, 9000mm/30ft, 12000mm/40ft Max. Acceleration: 1.0G Repeat Positioning Accuracy: ±0.03mm / ±0.0012in Positioning Accuracy: ±0.05mm / ±0.002in Pipe Weight Capacity: ≤260Kg / ≤573lbs Dkedpfxew I In Rs Ak Asw Round Pipe Processing Range: Φ15mm - Φ230mm / Φ0.6in - Φ9.1in Square Pipe Processing Range: 15×15mm - 230×230mm / 0.6×0.6in - 9.1×9.1in Laser Power: 3-20KW Bevel Cutting: Optional (Multi-functional option available)

Condition: good (used), Year of construction: 1994, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Dkodpfo Ahxl Asx Ak Ajw Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: ready for operation (used), Year of construction: 2006, operating hours: 76 h, functionality: fully functional, RYOBI 524 GX – Year 2006 4-Color Sheet-Fed Offset Printing Press | Technical Specification | Details | |---|---| | Manufacturer | Ryobi, Japan | | Model | 524 GX | | Year of manufacture | 2006 | | Number of printing units | 4 | | Maximum sheet size | 520 × 375 mm | | Minimum sheet size | 100 × 105 mm | | Maximum printing area | 505 × 350 mm | | Stock thickness | 0.04–0.60 mm | | Printing speed | 3,000–15,000 sheets per hour | | Plate size | 510 × 400 mm | | Feeder pile height | 800 mm | Dkedpe Ahymqefx Ak Asw | Delivery pile height | 430 mm or 700 mm, depending on the configuration | | Feeding system | Rotary stream feeder | Maximum printing speed depends on the substrate, consumables, and required print quality. Installed equipment and delivery configuration should be confirmed for this particular machine.

Condition: good (used), Year of construction: 1993, operating hours: 4,313 h, oil tank capacity: 350 l, overall weight: 26,000 kg, input voltage: 400 V, input frequency: 50 Hz, Max. pressing force: 320 t Bending length: 6100 mm Distance between uprights: 5500 mm Control system: MNC 95 c Maximum ram stroke: 250 mm Max. distance table/ram: 500 mm Overhang: 300 mm Table width: 250 mm Closing speed: 80 mm/s Working speed: 7 mm/s Return speed: 70 mm/s Oil capacity: 350 l Operating hours: 4312 h Voltage: 380 V / 50 Hz Dkedpfo Ah Eprox Ak Aew Total power consumption: 22 kW Machine weight approx.: 26 t

Condition: excellent (used), machine/vehicle number: 4174847, functionality: fully functional, power: 30 kW (40.79 HP), pressing force: 400 t, stroke length: 250 mm, table width: 1,000 mm, table length: 1,650 mm, table height: 170 mm, distance table to ram: 510 mm, clearance between the columns: 1,370 mm, total height: 4,750 mm, overall weight: 42,000 kg, Equipment: documentation/manual, This press is in very good condition. It is a machine with a "D"-shaped frame, making it very versatile for various applications. The machine is available for immediate sale and is currently stored in our workshops in Peschadoires, France. A technical file will be provided with the press. Attached you will find photos of the press and the technical data sheet. Price available upon request. Dkjdpfx Aj Ahxlxjk Aow

Condition: used, total length: 2,450 mm, total width: 1,900 mm, total height: 2,140 mm, Year of manufacture: 2020 Colour: Grey Weight: 5.500 kg - Year: 2020 - Documentation available: Yes - CE marking present: Yes - Drive system: CNC - Control system brand: Delem - Control system type: DA-41s - Power [kW]: 4.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 40 - Max. working width [mm]: 2000 - Column gap [mm]: 1800 - Throat depth [mm]: 200 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 100 - Crowning system: None - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 2450mm x 1900mm x 2140mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Dkjdpezr Inwofx Ak Aew

Condition: good (used), Year of construction: 1994, Pressure: 315 t Stroke: 20-150 mm Adjustable ram stroke min./max.: 20 - 150 mm Dedj Ahxmnspfx Ak Askw Table size: 1780 x 1250 mm Ram area: 1500 x 1000 mm Total power requirement: 75 kW Machine weight approx.: 46 t Additional information: - Installation height with max. stroke, adjustment at the bottom, installation at the top: 00 mm - Table opening: 1200 x 300 mm - Recess in the table: 1300 x 400 x 80 mm - Stroke rate continuously adjustable: 20-120 strokes/min.

Condition: excellent (used), Year of construction: 2010, KOMORI LITHRONE S-529 M C 66 million Year: 2010 Max. sheet size: 530 x 750 mm Max. print area: 520 x 736 mm Min. sheet size: 200 x 360 mm Substrate thickness range: 0.04 – 0.8 mm Max. production speed: 16,000 sheets/h *PQC-S remote control system (Quality Control System) for printing ▪️Remote ink control ▪️Remote dampening control ▪️Remote register control *KHS-AI® computer-controlled machine management system ▪️Intelligent inking system ▪️Machine self-diagnostic function ▪️Advanced CIP4-based information flow management ▪️Module for connection to a scanning unit * Touchscreen monitoring * High-Speed-Start system Dkjdpfx Ae Ah Sbxek Aow * Densitometric scanning unit * Automatic blanket cylinder washing * Automatic inking unit washing (dual nozzles for solvents and water) * Automatic impression cylinder washing * Remote substrate thickness adjustment from the control console * Remote substrate format adjustment from the control console * Semi-APC (Semi-Automatic Plate Change) system * Stream feeder with an 800 mm pile height * Feeder head equipped with lifting suckers (2x) and forwarding suckers (2x) * Deionizing air blast at the feeder head * Side air blasts * Pile support table for manual pile preparation * Table • Stream feeder with additional suction tapes * Electronic feed control * Electronic front-lay (register mark) control * Skew control via front-lay bar * Optoelectronic sheet-flow monitoring from the feed pile * Ultrasonic double-sheet detection (ULTRASONIC) * High-precision impression cylinders * Reduced number of transfer cylinders * Solid-construction transfer cylinders * Accessible plate cylinder * Accessible blanket cylinder * Chrome-plated impression cylinder * Cylinder designed for high-load/heavy-duty applications * Diamond-coated transfer grippers * Precision ink-feed adjustment (500-step ink-fountain key opening) * Inking unit featuring 19 rollers, including 4 oscillating/distributing rollers * Anti-ghosting roller (B and D positions) * Independent drive for the ink-fountain roller (ductor) * Adjustable ductor dwell time * Remote control of ink zones via the PQC-S console * Option to disengage the inking unit on the first or fifth printing unit KOMORIMATIC Dampening System * Dampening system suitable for both alcohol-based and alcohol-free printing * Oscillating roller for uniform dampening solution distribution, preventing ghosting and streaking * Rotational speed reduction • Continuous cleaning of the printing cylinder (or flat cylinder surface) based on the type of soiling * Integrated sensor * Pneumatic engagement and disengagement of rollers, controlled from the operator console * High-pile delivery (stack height: 900 mm) * Sheet decurler * Deionizing bar * Automatic lubrication for delivery chains * GRAFIX powder spray system o Automatic adjustment for printing speed o Automatic format compensation * Engagement and disengagement of dampening rollers * Engagement and disengagement of inking rollers Coating unit with TRESU chambered doctor blade system o Suitable for water-based and UV coatings o Remote register adjustment: ▪️ Lateral ▪️ Circumferential ▪️ Diagonal (adjusted at the transfer cylinder) o Remote adjustment for substrate thickness o Extended delivery: 2,000 mm o Special gripper bars – shadow-free (prepared for the installation of UV dryers) o Designed for tool-free mounting of rubber or photopolymer plates * Chambered doctor blade system

Condition: used, functionality: fully functional, power: 25 kW (33.99 HP), pressing force: 800 t, stroke length: 140 mm, table width: 850 mm, table length: 1,000 mm, distance table to ram: 750 mm, overall weight: 32,000 kg, Equipment: documentation/manual, Two 800-ton knuckle presses, MAYPRES MKN2 800, are available for immediate sale and can be viewed at our Peschadoires workshop in central France. Both presses are in excellent condition, as shown in the technical data sheet and the attached photos. An operating manual and technical documentation are available for each machine. Price upon request. Dsdpfx Ae Ahq I Uek Askw

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 3830, 3390 & 53, functionality: fully functional, power: 13.5 kW (18.35 HP), pressing force: 160 t, stroke length: 160 mm, table width: 670 mm, table length: 1,000 mm, distance table to ram: 360 mm, total length: 2,340 mm, total width: 2,100 mm, total height: 3,700 mm, overall weight: 14,000 kg, Equipment: documentation/manual, Three COFMO/STANKO gooseneck presses, 160-ton capacity, KD2132 model, are available for immediate sale and can be viewed at our Peschadoires workshop in central France. All three presses are in excellent condition, as shown in the attached technical specifications and photos. Djdpfxj Ahrc Ne Ak Askw User manuals and technical documentation are available for each machine. Price upon request.

Condition: excellent (used), functionality: fully functional, pressing force: 450 t, stroke length: 300 mm, table width: 850 mm, table length: 630 mm, distance table to ram: 860 mm, total length: 3,100 mm, total width: 3,100 mm, total height: 4,300 mm, overall weight: 20,000 kg, Equipment: documentation/manual, Ficep PFM 215 screw press, screw diameter 215 mm, 450-ton capacity. In very good condition, as shown in the photos and technical specifications attached. Dksdpfxs Ahzbto Ak Asw The press is stored in our workshops in Peschadoires, France. Technical documentation will be provided with the machine. Price upon request.

Condition: used, Bystronic XACT Smart 100, 100Ton x 3m, Year 2021.07, Weight 9000kgs. Included is the tooling shown in the photographs. Available for immediate supply. 2021 Bystronic XACT Smart 100/3100 CNC Press Brake with 100 Ton capacity and 3100mm bending length. Tooling included. Available from Prestwick, Ayrshire. Description The Bystronic XACT Smart 100/3100 is a modern CNC press brake designed for accurate and efficient sheet metal bending operations. Manufactured in 2021, this machine offers a 100-ton bending capacity and a 3100mm bending length, making it suitable for a wide range of fabrication, engineering and subcontract manufacturing applications. Offered from our Prestwick facility in Ayrshire, the machine is supplied complete with the tooling shown in the photographs and is available for immediate inspection. The XACT Smart range is renowned for its straightforward operation, high bending accuracy and reliable performance in both jobbing and production environments. Key Features: 100 Ton bending capacity 3100mm bending length Year 2021 CNC controlled Approximate weight 9,000kg Tooling included as shown Dodps Ad U T Ijfx Ak Aekw Immediate availability Inspection welcomed This machine represents an excellent opportunity to acquire a late-model European CNC press brake at a substantial saving against new replacement cost.