Used Pre Crusher for sale (12,696)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, operating hours: 55,000 h, overall weight: 7,300 kg, Equipment: safety light barrier, TRUMPF TruBend 5085 (B03) Year of manufacture: 3/2017 Ndjdoz Dgv Ujpfx Afusb Press force: 850 kN (85 tons) Machine operating time: 55,000 hours, hydraulic operating time: 14,000 hours, press beam operating time: 2,300 hours, crowning operating time: 200 hours. Control system: TASC 6000 Configuration: 2 support consoles 4-axis back gauge CNC-controlled crowning Hydraulic upper tool clamping Hydraulic lower tool clamping BendGuard Additional lighting for the front and rear working areas.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: LP-S08-142F, overall weight: 2,500 kg, nominal power: 5 kW (6.80 HP), Equipment: documentation/manual, Filling and sealing machine for pre-made pouches Speed: 10 - 30 pouches/min, the speed may vary depending on the pouch volume. Pouch types: Pre-made stand-up pouches, flat pouches Pouch size: Width 180 - 400mm, pouch length 120 - 500mm Sealing: Sealing with constant heat (special sealing bar) Pouch magazine: Stack magazine Adjustment of pouch width: Gripper sets can be adjusted individually via a motor The machine is offered without a dosing system. Ndjdpfx Afjyg Hmcjuob A labeling system with a thermal transfer printer can be integrated, but is not included in the offer. See separate offer (€7,400). Video available upon request.

Condition: excellent (used), Year of construction: 2020, operating hours: 8,200 h, functionality: fully functional, power: 37 kW (50.31 HP), volume flow: 7.9 m³/h, pressure (min.): 4 bar, pressure (max.): 12.5 bar, type of cooling: air, Equipment: documentation/manual, type plate available, Very well-maintained, fully functional Atlas Copco GA 37 VSD FF. Frequency-controlled screw compressor with integrated cooling dryer. Nsdpjz Dptpefx Afusdb Low operating hours.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, pressing force: 25 t, overall weight: 1,900 kg, Neff straightening press RPH 25 in very good condition, no oil leaks, runs smoothly. Fine and precise control of the pressing force. Outreach: 250 Distance between cylinder and plate: 500 Working stroke: 300, adjustable Working pressure: adjustable Nodpfjz A Dktsx Afuodb Lowering speed: adjustable Forward and reverse stroke: adjustable. With additional shaft alignment device (removable). Table: 420 x 1000, shaft plate: 400 x 1300 Dimensions: H 2.1m, D 1.28m, W 1.0m - 1.3m Weight: 1900 kg Can be inspected while powered on. Free loading at D-88433 Schemmerhofen.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, operating hours: 200 h, power: 7.5 kW (10.20 HP), pressing force: 60 t, stroke length: 365 mm, operating speed: 54 mm/s, Equipment: CE marking, documentation/manual, safety light barrier, The machine is almost unused. Includes a Coil Tech unwinding system. 4. Technical Specifications Maximum pressing force t 60 Ndodpfx Aezw Rpzefueb Table-to-ram distance mm 365 Ram stroke mm 4 - 102 Number of strokes per minute 54 Die opening diameter mm 40 Table overhang (from the center of the ram) mm 245 Ram adjustment mm 95 Ram surface dimensions mm 425 x 250 Table dimensions mm 750 x 500 Table opening dimensions mm 170 Supporting table with T-slot strength mm 70 Distance between frame side walls in the working area mm 430 Distance between anchor bolts (depth) mm 900 Distance between anchor bolts (width) mm 695 Machine dimensions: height mm 2270 depth mm 1850 width mm 1100 Weight kg 3640 Motor power kW 7.5 Motor speed rpm 1450 Direct sale to end-users only. W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 104605-104645, input voltage: 400 V, total width: 1,500 mm, total length: 4,500 mm, total height: 2,820 mm, type of input current: three-phase, Fortuna Primus K4 – 4-row roll divider – rounder + depositor + GEK, year of manufacture 2011 Dough divider & rounder Condition: fully functional, directly from ongoing operation Application: round rolls, e.g., Kaiser rolls, braided rolls, salt rolls, wheat & mixed doughs • Weight range: approx. 40-110/120 g • Hourly output: approx. 4,800 pieces/hour • Rounding chamber height: approx. 10–35 • Rounding speed: scale 0–30 • Hopper volume: 20–25 kg • Dough yield: TA 160–165 • Connection power: approx. 1.5 kW • Machine weight: 650–700 kg • Depositor: for 60 × 80 cm trays (58–78) _____ Equipment • Fortuna Primus K head machine • 4 rows • GEK pre-fermentation cabinet matching the line • Rounding/stamping sets: Kaiser rolls, braided rolls, salt rolls • Complete depositor • Immediately ready for operation • In use until recently • Clean, well-maintained, regularly serviced • No known defects • Electronics modernized (new display) INSPECTION and TRIAL RUN possible (only) by appointment Freight possible, fully assembled with a jumbo truck (L/W/H = approx. 4,500 mm x 1,500 mm x 2,820 mm) Nodpfx Aoy St U Sefujdb

Condition: excellent (used), Year of construction: 2013, ATLAS COPCO GA45VSDFF air compressor, API481000, water-cooled Ndedpfsz D D Hqsx Afueb MANUF. ATLASCOPCO TYPE GA45VSDFF S/N API481000 YEAR 2013 POWER (kW) 45 CAPACITY (m3/min) 8.61 PD (bar) 12.75 HOURS (SERVICE/TOTAL) VARIABLE FREQUENCY DRIVE yes BUILT-IN DRYER yes HEAT EXCHANGER yes COOLED (AIR/WATER) water WITH TANK no DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED

Condition: used, all stainless steel mobile Ndodpjz Dvcwsfx Afujb adjustable speed belt width 600 mm with air knife dimensions (l x w x h) : ± 3.250 x 1.000 x 2.000 mm

Condition: used, Year of construction: 2021, machine/vehicle number: 13900, functionality: fully functional, DENER B-Servo 40-130 CNC servo-electric press brake. Technical data: - Year of construction: 2021 Nsdpjz Aa Eijfx Afuedb - Serial number: 13900 - Bending force: 40 t - Working length: 1300 mm - Back gauge: X + R axes - Tooling style: Eurostyle / AMADA Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: excellent (used), Year of construction: 2008, S016807 PROD. KAESER TYPE CSD122 SFC S/N 1124 YEAR 2008 POWER (kW) 75 CAPACITY (m3/min) 2.20 - 10.50 PRESSURE (bar) 8.5 HOURS (RUNNING/TOTAL) 74045/99534 FREQUENCY CONVERTER yes BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no Nsdpfx Aez D Em Eofusdb CONNECTIONS 2 NEW/USED USED

Condition: like new (used), Year of construction: 2015, machine/vehicle number: 3342-01-2815, functionality: fully functional, power: 3.4 kW (4.62 HP), input voltage: 230 V, input frequency: 50 Hz, Compressed air dryer Manufacturer: FarragTech Type: CARD 110 S Year of manufacture: 2015 Nsdpfxozaum Ds Afujdb Power: 3.4 kW Two material handling devices Manufacturer: ICEVA Type: GS-4mD Year of manufacture: 2015 Power: 1200 W System in perfect condition, like new!!! PRICE REDUCED FROM 3550 TO 3250 EUR!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, pressing force: 70 t, Equipment: documentation/manual, HSM HL 7009 Re / Li horizontal baler. The machine is in very good condition and regularly serviced by an authorized service center. Ndjdpsz Aaf Njfx Afuob This baler is designed for larger waste disposal projects in retail outlets and small and medium-sized central warehouses. Bales from the HL 7009 model have a cross-section of 1100 x 1100 mm and, with a bale length of 1200 mm, can weigh up to 600 kg, ensuring optimal utilization of the truck's payload. Pressing force: 700 kN Specific pressing force: 58 N/cm² Drive power: 10.5 kW Voltage / frequency: 400 V / 50 Hz Idle capacity (theor.): 42.97 m³/h Loading opening width x length: 890 x 1020 mm Bale width x height x length: 1100 x 1100 x 1200 mm Total length x width x height: 5366 x 2525 x 2559 mm Bale weight: 600 kg

Condition: excellent (used), Year of construction: 2008, PROD. MAUGUIERE TYPE MAV400 S/N CAI027542 YEAR 2001 POWER (kW) 30 OUTPUT (m3/min) PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 60238 INVERTER no Nsdpfx Aez Eap Dofuodb BUILT-IN DRYER no EXCHANGER no COOLED (AIR/WATER) no ON TANK no DOCUMENTS no CONNECTION 1 NEW/USED USED

Condition: new, Year of construction: 2023, For sale: a new, unused SPANEX SHB RS 55–70 briquetting press, manufactured in 2023. The package includes a separate intermediate hopper designed to feed wood chips and dust from an extraction system into the press. The press was purchased for our own production facility but was never installed or commissioned. It is stored disassembled on pallets, as shown in the actual photographs. The intermediate hopper is a separate unit, approximately 1.5 × 1.5 m. Included in the sale: • SPANEX briquetting press • Hydraulic unit and control cabinet • Intermediate hopper Technical information: • Briquette diameter: Ø 70 mm Nsdpfxsz Eqfcs Afusdb • Published output for the SHB RS 55–70 series: 50–90 kg/h, depending on the material • Custom configuration with a more powerful motor than the standard series specification The actual output of this particular configuration has not been tested. The exact installed motor rating can be confirmed from its nameplate. The first gallery image is a concept visualization showing a possible installation beneath a dust extraction unit. The remaining images show the actual equipment offered for sale. The large dust extraction unit is not included. Connections and installation will need to be adapted to the buyer’s system. The equipment is located in Latvia and can be inspected by appointment. We can assist with loading and transport arrangements.

Condition: excellent (used), functionality: fully functional, plate length 3500mm plate width 1300mm two inserts Nodpfxoz D Afxs Afusdb water heating - needs to be connected to heater 8 hydraulic pistons pistons diameter 85mm span between plates max 460mm

Condition: good (used), Year of construction: 2006, Capacity 30 - 50 kg/h Njdpfsz D Iulsx Afusdb Diameter of the briquets 50 mm Motor output 5,5 kW Dimensions (L/W/H) 2000 x 1300 x 1400 mm Weight 500 kg 1 m³

Condition: used, Year of construction: 1999, functionality: fully functional, power: 17 kW (23.11 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 220 t, stroke length: 180 mm, table width: 4,000 mm, overall weight: 16,000 kg, We offer this used Amada HFBO press brake, manufactured in 1999. Date of manufacture: 01.10.1999 Serial number: HFBO22040H991018 Bending length: 4,000 mm Ndsdpfx Afezzknroueb Maximum force: 2200 kN Maximum stroke: 180 mm Voltage: 400/415 V Frequency: 50 Hz Installed power: 17 kW Rated current: 35 A Number of phases: 3 Machine weight: 16,000 kg Machine stopping time: 80 ms Machine stopping distance: 9 mm If you have any questions or require further information, please send a message or contact us by phone.

Condition: used, Year of construction: 2019, functionality: fully functional, pressing force: 5 t, stroke length: 60 mm, throat depth: 240 mm, ram plate width: 260 mm, ram plate length: 220 mm, overall weight: 233 kg, Equipment: CE marking, We are offering this used TOX PFHL 056.002.A.060 pneumatic knee-lever press, manufactured in 2019. Type: PFHL 056.002 Serial number: 439487.144 Description: Pneumatic press Maximum pressing force: 57.5 kN Total stroke: 60.0 mm Minimum air pressure: 3 bar Maximum air pressure: 6 bar Weight: 233.0 kg Year of manufacture: 2019 Nedpfx Afszy Uz Hjuodb With stroke counter Including tool holders Mobile base frame optionally available (see last image) Condition: see images, mechanically in perfect condition If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2010, Brand: DIXI Model: 60 SD Year of manufacture: 2010 Pressing force: 60 tons Voltage: 400 Max. bale weight: 340-500 kg Bale dimensions: approx. 120 x 80 x 80-110 cm Ndjdpfx Afjz Az Eljujb Machine weight: 2400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Dimensions of filling opening: 115 cm wide x 80 cm deep x 55 cm high The DIXI 60 SD features simple operation, an automatic start function, and automatic bale ejection. Thanks to its compact, low-profile design, this machine is ideal for spaces with limited headroom. Video available upon request!

Condition: like new (used), Year of construction: 2021, Almost New: Complete Compaction System Ludden & Mennekes SVS11+KEV 1. Stationary Screw Compactor L&M SVS 11 Nsdoz Eg Dzjpfx Afusdb Virtually unused, stationary screw compactor (~1 month) designed for filling compaction containers and/or other containers. The machine is constructed from a robust, welded steel frame with continuously welded seams. Its low-maintenance screw compaction system is suitable for continuous feeding, and the compaction chamber does not require periodic cleaning. Main technical specifications Overall length: 2,480 mm Overall width: 1,660 mm Overall weight: 2,300 kg* Loading height: 1,350 mm Feed opening: 1,375 × 1,490 mm Screw diameter: 750 / 500 mm Screw speed: 17 rpm Drive power: 11 kW Residual-current device / Fused plug Type B / 300 mA 2. Hydraulic Container Coupling/Decoupling System Hydraulically operated coupling and decoupling system with forward and reverse movement. The hooking grippers are operated manually. Designed for the secure connection of different types of compaction containers. 3. L&M KEV Cardboard Intake/Deflection and Pre-Shredding Unit Virtually unused L&M KEV coarse shredding unit for bulky cardboard packaging, cardboard tubes with cores, and other large-format packaging materials. The material is reduced to a size suitable for efficient compaction, helping to improve compactor utilization and reduce disposal costs. The unit can be installed above L&M self-compacting containers or stationary compaction systems so that shredded material falls directly into the filling opening. Main technical specifications Dimensions (L × W): 1,230 × 1,490 mm Shredding shaft width: 1,400 mm Cutting knife diameter: 585 mm Number of cutting knives: 9 Feed opening: 960 × 1,400 mm Drive power incl. power supply: 2.2 kW + 0.75 kW 4. L&M PCS 6500 Compaction Container Main technical specifications Capacity: 32 m³ Dimensions: 6,500 × 2,500 × 2,600 mm PRICE ON REQUEST

Condition: good (used), Year of construction: 2015, functionality: fully functional, bending force (max.): 230 t, number of axes: 5, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame in all-steel construction - Press beam, stress-relieved by annealing - Spherical mounting of the press beam with inclination - Electro-hydraulic upper drive with 4-cylinder technology - Generous bending clearance - Flat front covers Ndodpez D Tnwsfx Afujb - Modern block hydraulics - Electronic pressure gauge - Measuring system with glass scale and spring compensation - Hydraulic oil in the machine (lifetime lubrication) - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Back gauge system - Rear back gauge system, 2 axes, X and R axes - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool holder, manual clamping, hardened - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - Manual crowning Control system - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15-inch touch screen - Network capable - Teleservice via modem Operation - Control panel with LCD keypad and foot switch - Communication bus Safety - Standard safety devices

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 133, product width (max.): 270 mm, working width: 270 mm, type of input current: three-phase, Equipment: documentation/manual, Semi-rotary flexographic printing machine MALBATE Mecaformat 270. 5 printing units + 1 varnish unit + rotary magnetic die-cutting unit. UV drying – 6 drying units. Compressed air: 7/8 bar. Maximum web width: 270mm Minimum web width: 150mm Maximum feed length: 220mm Minimum feed length: 50mm Maximum printing width: 260mm Maximum printing length: 305mm Maximum length of the semi-rotary cutting die: 220mm Maximum permissible unwind roll size: 3000m Unwind roll diameter: 800mm Rewind waste roll diameter: 450m Rewind roll diameter on the automatic splicer (AS): 360m Maximum speed: 10,000 impressions/hour The machine is currently in production. An inspection can be arranged by appointment. Nsdpfjyr R Sgjx Afuodb Details are available in the PDF file. For further information, please do not hesitate to contact us.

Condition: used, Year of construction: 2017, Schuler BEUTLER press Type: MC 4000 Year of manufacture: 2017 Pressing force: 4,000 kN Stroke rate: 20-80 strokes/min Stroke adjustment: 40-315 mm Ram adjustment: 200 mm Installed height: 750 mm Table area: 3,000 x 1,400 mm Ram area: 3,000 x 1,300 mm Press weight: 72,000 kg Ndjdez Dxg Ejpfx Afujb including GSW Schwabe strip feed line Strip width: 80 - 500 mm Strip thickness: 0.8 - 4.0 mm Coil capacity: 5,000 kg

Condition: used, all stainless steel for product up to 530 x 530 mm Dimension: (L x W x H): 950 x 1.450 x 1.900 mm 3 x 380V, 50Hz, 22kW Ndedpfoz D Aq Iex Afuob

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Self-loading press for Steton P111 veneer, 3000×1300 Video: photos.app.goo.gl/1piXqdhN9MUjXRyD9 Njdszh Ivmopfx Afuodb Working length: 3000 mm Working width: 1300 mm Automatic material loading Heated platens using oil Diameter of vertical cylinder: 70 mm Diameter of horizontal cylinder: 50 mm Year of manufacture: 2019 Total power: 24.5 kW