Used Primate Tool for sale (37,173)

Condition: used, machine/vehicle number: 55191-08, equipped with a 2-axis digital display, manufactured by HEIDENHAIN, with an angular milling head, 2 indexing tables, an additional clamping table, counter support, 3-jaw chuck, various change gears, machine light, and a steel transport cart. Gsdsz Nhndjpfx Al Usbu

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 99500007558, total width: 800 mm, total length: 1,100 mm, total height: 800 mm, input voltage: 230 V, overall weight: 150 kg, table length: 1,100 mm, table width: 800 mm, table height: 800 mm, input frequency: 50 Hz, compressed air connection: 8 bar, The machine is in very good condition and comes from an educational institution. Gbsdpfjz E A A Tox Al Uou

Condition: excellent (used), Year of construction: 2007, Tool Tempo Type : TT 280 Gbodpfemxkm Ajx Al Uju BJ CA 2007

Condition: used, Year of construction: 2016, output 1 kVA Pneumatics 6-8 bar weight 175 kg Condition: Used Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Gbsdjz N Hxujpfx Al Uju Subject to change, errors in technical data and specifications, and prior sale.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min Gbsdpfx Aez Rpcrsl Usu rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: used, machine/vehicle number: 2101-1547, with a 3-axis digital display, manufactured by HEIDENHAIN, including a coolant system and machine light. Gbedpfoz Nhmtjx Al Uou

Condition: used, machine/vehicle number: 37247, equipped with a 3-axis digital display, manufactured by HEIDENHAIN, with a coolant system, machine light, and angled milling head with counter holder. Gbjdpfxsz Nhn Rs Al Uju

Condition: used, with a 3-axis digital display, manufactured by HEIDENHAIN, including a coolant system and machine light. Gjdpfez Nhnqjx Al Uobu

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 21197, overall weight: 2,100 kg, number of drawers: 100, power: 2 kW (2.72 HP), Gühring TM-136 Tool Storage System Gbodpfx Alsz Arz Nj Uju Year: 2006 Power supply: 230 V, 2 kW Empty weight: 2,100 kg Maximum total load: 6,000 kg Industrial tool dispensing and storage system with various drawer sizes. Used condition. More information and photos available on request.

Condition: used, functionality: unexamined, Deckel FP1 milling machine Gbodpfszv Sm Sox Al Uou Location: Bad Tölz Inspection is welcome. We have other used machines available. Please contact us.

Condition: good (used), Year of construction: 1998, functionality: fully functional, overall weight: 1,650 kg, Table surface: 800 x 400 mm Travel ranges: Longitudinal travel (X): 600 mm Gbedpfx Aez N Et Rel Ueu Lateral travel (Y): 400 mm Vertical travel (Z): 380 mm Weight, approx.: 1.65 tons

Year of construction: 2025, condition: new, functionality: fully functional, Type: TT-108’000 Year: 2025 Operating hours: 0 h (Machine is brand new) For sale due to an incorrect purchase. Gbodjzhpdlepfx Al Uju Ready for immediate delivery.

Condition: excellent (used), functionality: fully functional, total height: 1,760 mm, total length: 1,100 mm, total width: 800 mm, type of input current: three-phase, grinding wheel diameter: 125 mm, overall weight: 520 kg, input voltage: 400 V, spindle nose: ISO 40, Tool grinding machine DECKEL S11 TECHNICAL CHARACTERISTICS: Grinding wheel diameter: 125 [mm] Workpiece spindle nose: ISO 40 Paper filtration unit: No Supply voltage: 400 [V] Total power required: 2 [kVA] Dimensions: 1100 x 800 x 1760 Weight: 520 [Kg] EQUIPMENT INCLUDED: x1 universal index head - Part N°: 255X0X x10 dividing inserts for universal index head x1 tailstock with transverse adjustment - Part N°: 2621000 x1 tailstock with vertical adjustment - Part N°: 2624000 x1 swivel bracket assembly - Part N°: 2626000 x1 universal wheel dresser - Part N°: 2628000 Gbodszz Hk Nopfx Al Usu x1 universal setting gauge - Part N°: 2570000 x1 spiral and relief grinding attachment - Part N°: 2580000 x1 relief grinding slide - Part N°: 2673000 x1 machine vice - Part N°: 2635000 x1 opto-electronic measuring unit with miscroscope - Part N°: 2650012 x2 digital readouts RSF-Elektronik x1 radius grinding attachment - Part N°: 2601X00 x1 LED lamp x3 feet pads Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools, milling cutters, taps, and drills. Similar to brands such as Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter. Also see cylindrical or surface grinders, lathes, machining centers, and milling machines.

Condition: good (used), functionality: fully functional, Internal article number: 26051 HSK-A63 Turning tools Gbedpfx Asz Ha Icol Uou Sandvik CoroTurn TR 3x base holders HSK-A63 C4-390.410-63 080C + Insert Coroturn 107 / 5513 020-01 / 5680 049-01 / C4-SDJCL-27050-11 + Insert Coroturn 107 / 5513 020-01 / 5680 049-01 / C4-SDJCL-27050-11 + Insert CoroTurn TR-C4-D13 NCN-00050 5680 049-01 / 5513 020-01 + Insert C4-SRDCN-00050-08A 5513 020-04 / 5680 051-03 + Insert Sandvik C4-LF 151.23-27060-30 + Insert Sandvik C4-SRDN-00050-08A + Various indexable inserts

Condition: good (used), Year of construction: 1999, functionality: fully functional, CNC tool grinding machine Walter Helitronic R-Power - Year of manufacture: 1999 - Control system: HMC 500 Gedpfxsz Nf D Nj Al Ujbu - Cylindrical loader - Grinding spindle motor power: 11 kW

Year of construction: 1989, condition: used, Sharpening TOOL Schonberger NURNBERG TKRS Gbsdpfxscl Tttj Al Uou location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client Cover startup Type negotiated description Comments GRINDING AND SAW tape Blades for circular saws and milling Dividing HAVE COMPLETE READY TO WORK

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Colour: Silvergrey RAL 7001 Weight: Approx. 67 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Suitable for both water and oil media Gbodpfsx Emfkjx Al Uou Temperature range max.: Water: 90 °C Oil: 150 °C Heating capacity: Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Cooling capacity: 45 kW at 90 °C Pump capacity: Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Vacuum mode: max. 8 m H₂O Tank capacity: Min. 16 litres, max. 20 litres Connections: Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread

Condition: good (used), Year of construction: 2008, functionality: fully functional, Milling machine Macmon M 434 NC Manufacturer: Macmon Type: 434 NC Control: Heidenhain TNC 128 Gsdpfx Aleztw Ehs Uobu Year of manufacture: 2008 Condition: used X-axis: 400 mm Y-axis: 250 mm Z-axis: 400 mm Clamping surface 600 x 320 mm Main drive: AC motor kW 3 Speed range: Vertical infinitely variable 30 - 6300 Horizontal stepless 0 - 4200 - Feed rate 0 - 10 m/min Tool holder ISO 40 Operating voltage 400 / 50 Volt / Hz Control voltage 24V Weight 1200 kg Scope of delivery - Documentation - Machine feet - Coolant system - Spindle guard - Machine light - HR410 Handwheel - Horizontal spindle Counterholder

Condition: excellent (used), functionality: fully functional, Infinitely variable speed: 150 – 2000 rpm Spindle taper: ISO 30 Godpfxoz Ilibe Al Ujbu Feed on X-axis, infinitely variable: 15 – 250 mm/min Travels: X = 280 mm, Y = 170 mm, Z = 250 mm • Universal swivel and tilting table

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle Gbsdpfjz Ipl Hox Al Ueu hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Colour: Silvergrey RAL 7001 Weight: Approx. 67 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Suitable for both water and oil media Temperature range max.: Gjdey Uddcjpfx Al Usbu Water: 90 °C Oil: 150 °C Heating capacity: Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Cooling capacity: 45 kW at 90 °C Pump capacity: Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Vacuum mode: max. 8 m H₂O Tank capacity: Min. 16 litres, max. 20 litres Connections: Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread

Condition: used, Year of construction: 2017, Measuring range Z 420 mm Measuring range D 420 mm tool taper SK 50 weight approx. 215 kg Condition: used Technical specifications & accessories: - SK 50 to SK 40 adapter - Pilot 1.0 Software Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Gedpfx Aoz Ek D Esl Uobu Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: excellent (used), functionality: fully functional, Offer: Like-new turning tool holders VDI40 turning tool holder Tool holders, VDI40 tool holders. The holders have been inspected and are in very good, almost new condition. The outstanding quality of well-known manufacturers confirms the high repeatability and a very long service life. ----- Order number: 435_C1 → In stock: 2 pieces; Price: €56.00/piece Order number: 430_C2 → In stock: 3 pieces; Price: €56.00/piece One tool holder has been ground on the underside (see picture), but this does not affect its functionality. Order number: 432_B4 → In stock: 2 pieces; Price: €56.00/piece Order number: 433_B4 → In stock: 2 pieces; Price: €56.00/piece For orders of 4 pieces or more, the above prices apply, including shipping costs within Germany. ----- B3 with right-hand rotation; B4 with left-hand rotation C1 with right-hand rotation; C2 with left-hand rotation ----- Short, reversed VDI radial tool holder. Tool holder for mounting external turning tools in the normal position, i.e., with carbide inserts facing upwards: C1 with right-hand rotation; C2 with left-hand rotation. Shipping costs: upon request. ----- Dimensions: D = 83 mm d-2 = 83/40 mm (45.52) H = 32.5 mm L1 = 75 L2 = 22 l-4 = ----- More VDI40 holders can be found in our other offers, e.g., VDI40 form E2. For boring tools with cylindrical shanks, with internal and external coolant supply. Surface hardened, blued, and ground. Gbodoz Hn Rrepfx Al Ueu

Condition: excellent (used), OERTLI window tools. Gbsdpfx Aljz Iw Euo Ueu

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Deckel FP4M universal milling machine in excellent technical and optical condition. Technical specifications: - Working travel X/Y/Z: 500/400/400 mm - Spindle speed range: 50 - 2500 rpm - Power: 3.7 / 4.4 kW - Spindle brake - Automatic feed: X-Y-Z steplessly adjustable 6.3 / 630 mm/min - Rapid traverse X-Y-Z 1300 mm/min - Fixed angle table - Vertical quill, 90 mm travel - Tool holder ISO 40/M16 - Weight approx. 1500 kg Gjdjz Atxvepfx Al Usbu Machine options: - 3-axis digital readout Heidenhain - Coolant system - Chip tray - Central lubrication - Automatic pulse lubrication on the milling head Includes cabinet with accessories.