Used Profiling Line for sale (15,504)

Condition: used, Year of construction: 2025, Overview New complete filling and packaging line for beer and carbonated soft drinks in aluminium cans, with an output of 6,000 cans/h at 500 ml and 8,000 cans/h at 330 ml. The line runs from the depalletizer through can rinsing, filling and seaming, tunnel pasteurization, inspection and drying to sleeve labelling, tray shrink wrapping, ABB robot palletizing and pallet stretch wrapping. Two-floor layout: depalletizing on the upper floor, a clamping conveyor lowers the cans to the ground floor for all following machines. All machines are built by Ningbo Cixi except the ABB robot. Technical data - Year of manufacture: 2025 - Capacity: 6,000 cans/h at 500 ml Standard, 8,000 cans/h at 330 ml Standard - Can formats: 330 ml Standard (Ø 66 x 115.2 mm), 500 ml Standard (Ø 66 x 168 mm) - Lid size: 202 for all formats (plug Ø 52.40 mm) - Electrical supply: 380 V / 220 V, 50 Hz Crsdpjz Dv Uyefx Aktei - Filler: compressed air and CO2 at 0.4 MPa - Pasteurizer heating: steam at 0.4 MPa, steam boiler not included Scope of Delivery - Depalletizer | XD400 | automatic tier sheet removal and empty pallet stacking, Siemens PLC and touch screen, 10,000 cans/h, 7.8 kW, approx. 8 x 4 x 3.3 m - Can lowering conveyor | JSJ-A | S-type clamping conveyor from the upper to the ground floor, fits both can formats - Can rinser | CX-1 | inline spray rinser, 2 sets of can cages, approx. 4,000 mm total length - Filler-seamer monoblock | AXW20-4Q | 20 filling valves, 4 seaming heads, automatic lubrication, change parts for Ø 66 mm cans, 7.5 kW, approx. 5,000 kg, 3,050 x 2,000 x 2,000 mm - Tunnel pasteurizer | BG-PLG | 8 temperature zones, 4 plate heat exchangers, 25 kW, 16,000 x 2,400 x 1,800 mm including heat exchangers and piping - Fill level inspection | YMXS-180G | inline - Leak inspection | inline internal pressure check - Can inverters | FGJ | 2 units - Air knife dryer | CG-1 | 24,000 cans/h, 7.5 kW fan - Can conveyors | magnetic chain conveyors, approx. 97 m up to the labeller with 13 drives and control cabinet, plus 22 m of belt conveyor from the labeller to the shrink wrapper - Sleeve labeller | SLM-150 | up to 9,000 cans/h, PM-1800 steam shrink tunnel with steam generator, mandrels for both can formats - Tray shrink wrapper | BT25 (TPM-250A) | film-only packs and tray with film, up to 25 packs/min, max. pack size 420 x 280 x 350 mm, approx. 3,000 kg - Robot palletizer | ABB | IRB 460 | 4-axis robot, 110 kg wrist load, 2.4 m reach, vacuum gripper for 6, 12 and 24 packs in both can formats - Pallet magazine | automatic, holds 8 to 10 empty pallets - Pallet conveyors | heavy-duty roller conveyors - Pallet stretch wrapper | automatic inline turntable wrapper, 2,000 mm turntable, loads up to 1,200 x 1,200 x 1,800 mm, 20 to 30 pallets/h, Siemens PLC and touch screen Condition New and unused, packed in export wooden cases. The photos show reference machines of the same models from the manufacturer's documentation. Availability Immediately. Location: Serbia.

Condition: excellent (used), mileage: 686,003 km, power: 261 kW (354.86 HP), first registration: 04/2021, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,150 mm, fuel: diesel, fuel tank capacity: 430 l, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 6,510 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 7,500 kg, permissible axle load (axle 3): 11,500 kg, Equipment: ABS, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, hill-start assist, power mirror, seat heater, soot filter, spoiler, traction control, = Additional Options and Accessories = - Aluminum fuel tank - Rear work lights - Front work lights - Heated mirrors - Leaf spring suspension - Brake booster - Combination lights - DAB radio - Roof spoiler - Differential lock - Mast for visibility - Remote central locking - High beam headlights - Windshield - Enclosed cab - Speed limiter - Interior lights - Cab - Tilting hydraulics - Refrigerator/cooling drawer - Beacons - Air suspension - Air-suspended seats - Air horn - Motorcycle cover - MX engine brake - Parabolic spring suspension - Particulate filter - Radio/CD player - Radio/cassette player - Rotating beacon - Disc brakes - Sleeper cab - Hose connections - Seat heating - Sun visor - Stationary air conditioning - Blind spot camera - Automatic heating system - Tool box - Windscreen - Central lubrication system - Equipment transfer Crsdoz S Nbdepfx Aktsi = Additional Information = General Information Number of doors: 2 Year of manufacture: 2021 Registration number: 91-BRH-7 Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Transmission Transmission: 12T2210, automatic Axle Configuration Maximum front axle load: 8000 kg Rear axle 1: Lift axle; Max. axle load: 7500 kg Rear axle 2: Max. axle load: 11500 kg Weights Unladen weight: 8,749 kg Payload: 18,251 kg GVW: 27,000 kg Interior Number of seats: 2 Maintenance, History and Condition APK (Technical Inspection): valid until 04.2027 Damage: none

Condition: excellent (used), Year of construction: 2014, Maximum working length : 6300 mm Maximum cutting w/h : 300 x 100 / 235 x 120 mm Crodpfoz Ruxfex Aktei Maximum weight of items : 60 kg Engine size : 5,5 Kw Sawblade diameter : 500 mm Software : Weinig Dimter OPTICOM Digital dispaly with optimization and memory of 100 cutting lists Outfeed table : 2000 mm

Condition: repair required (used), For sale at a favorable price: Please send us your price offers. Mattress production line for overhaul or dismantling. Manufacturer: KSM, approximately 25-30 years old. The system is aging and requires a thorough overhaul; otherwise, it is functional. It has only been used infrequently by us. However, it is also interesting as a source of spare parts for dismantling. Control system with Lenze frequency inverters, Siemens PLC, conveyor belts, many motors, sensors, metal, aluminum profiles, needle grippers, etc. Consisting of: Gantry: Plate feeder with needle gripper (for automatically placing individual foam plates onto an alignment station with a conveyor belt). Roller adhesive application system (here, the foam plates are passed through on the conveyor belt and adhesive is applied by rollers). Padding carrier feeder with needle gripper (for automatically placing padding carriers (felt) onto the foam plates that have been wetted with adhesive). Adhesive tunnel with adjustable nozzles (here, the pre-assembled plates are sprayed with adhesive on the conveyor belt to allow the frame to be glued). After that, the material can be removed from the conveyor belt to assemble the mattresses. Several hundred mattresses per shift are possible. Csdj Aba Ncjpfx Aktsri The system will only be sold as a whole. Dismantling and transport must be handled by the buyer. (EXW)

Condition: used, mileage: 207,417 km, power: 125 kW (169.95 HP), first registration: 03/2015, fuel type: diesel, fuel: diesel, color: other, gearing type: mechanical, emission class: euro6, number of seats: 24, total length: 7,500 mm, total height: 2,900 mm, Equipment: ABS, = Additional Options and Equipment = - Air conditioning (driver) - Webasto heater Credeztw N Hjpfx Aktji = Further Information = Damages: none = Company Information = We are an international company based in Belgium, in the Brussels area (+/-20 km). Belgian Bus Sales is your ideal partner for purchasing and selling used buses. We have an extensive parking area which serves as our display lot. We always have a large selection of buses from various brands, capacities, models, and at all price points in stock. We can find the right coach, school bus, or city bus to fit your needs and budget. All information without guarantee. Errors, prior sale, and typing mistakes excepted. Viewing hours for used buses: Mon.–Fri.: 08:30 – 12:00, 12:30 – 17:00. Mówimy po polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: ready for operation (used), Compact Dovetail Machine Output: approx. 4–6 joints/min. For wood tenon and mortise joints Thickness: 30–120 mm Width: 75–250 mm Pressing force: 22.5 t Automatic glue application via 2 glue combs, used for processing PUR glue. Spring-mounted with a safety shut-off system that immediately stops the milling and glue application feed in the event of even the slightest load. All parts are chrome-plated. Electrical system with Siemens S7 PLC, year 2015 Milling motor output: 22.00 kW Hydraulic unit: 29.50 kW Cjdpfx Akozmmr Rjtjri Oil cooler: 0.75 kW Infeed feed: 1.50 kW Outfeed feed: 2.50 kW Cut-off saw: 3.00 kW Total power consumption: 59.25 kW = 120 amps In the past, jöma has successfully delivered and installed 10 of these machines. We can supply all spare parts for the compact dovetail machine. We, jöma, have been supplying and repairing Cook Bolinder machines for 30 years.

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, working width: 205 mm, working height: 60 mm, Spraying machine for profiles / Automatic spraying machine for moldings Manufacturer: Falcioni Type: Flexispray Year of manufacture: 2005 Linear continuous spraying machine for the automatic coating of profile moldings, frame moldings, profile boards, and baseboards, with a spray booth, belt conveyor, and programmable gun control. Typical applications: Molding production, frame and picture frame manufacturing, profile wood and panel production, contract coating. Intended coating materials according to the manufacturer: - UV stains and water-based stains Cjdpfe Aa Ad Tex Aktsri - Water-based paints applied by spraying - UV paints Workpiece dimensions: Max. working width 205 mm Max. workpiece height 60 mm Minimum workpiece length 400 – 800 mm Feed: Feed speed 20 – 120 m/min Conveyor drive 0.75 kW, inverter-controlled Extraction: Exhaust fan 0.55 kW Exhaust capacity 5000 m³/h Compressed air: Operating pressure for gun control 4 – 5 bar Compressed air consumption 1200 Nl/min Electrical system: Installed total power 1.6 kW Machine weight approx. 600 kg Equipment: - 3 spray guns - without material pump Basic concept: - Spray booth with large-area glazing - Rubber-coated conveyor belts at the infeed and outfeed, roller conveyor in the spraying zone - Gun activation via workpiece detection with a pressure roller and microswitch - Electronic control system VT 50 for programming gun height and on/off points for each gun, display of belt speed, meters produced, and quantity - Overspray recovery via collection trays and collection tanks - Dry filter system for exhaust air purification - Operation by one person Note: The technical specifications have been taken from the manufacturer's operating manual and may differ from the actual design of the machine.

Condition: used, functionality: fully functional, Dubus multi-spindle drilling machine. Full specifications coming soon. Crodpfx Aksz Irn Rjtoi

Condition: used, Year of construction: 2011, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Complete MECATHERM line from 2011, consisting of an H1 volumetric divider and an RT2 shaping unit with an integrated pre-fermentation and resting system. Industrial line designed for the automated production of baguettes, long loaves, and other bakery products, depending on the shaping equipment used. Line composition: - MECATHERM H1 volumetric divider - Complete MECATHERM RT2 shaping unit - Integrated pre-fermentation and dough resting system - Shaping and elongation system - Automatic depositing system onto trays - Several additional shaping accessories and equipment - Conveyors and connecting equipment Features: Csdoz Sfa Dopfx Akteri - Manufacturer: MECATHERM - Year: 2011 - H1 divider capacity: up to 2,500 pieces/hour, depending on the weight - Production adapted for baguettes and various loaf sizes - Automated line from dividing to depositing onto trays Complete line sold with numerous accessories. Additional information and video available upon request.

Condition: used, Year of construction: 1995, Hole row and fitting drilling machine Year of manufacture: 1995 Single-row hole row and fitting drilling machine Hinge plates and fittings can be processed without major retooling Workpiece width max. 600 mm Drilling bar with 15 spindles, spacing 32 mm Indexing system, manual, with stop guides Drilling length max. 480 mm Motor 2.2 kW - 2800 rpm Drill chuck 10 mm with clamping surface Operating pressure 6 bar Cjdpfx Ajz H Dwnjkteri Weight: approx. 220 kg Availability: short-term Location: Flörsheim

Condition: good (used), Stainless steel 4,650 x 750 x 2,200 mm (L x W x H) Credpfx Ao Ab H N Nektji -20% discount when picking up the item at the Erfurt location by October 30, 2026.

Condition: used, mileage: 111,152 km, power: 265 kW (360.30 HP), first registration: 10/2025, fuel type: diesel, number of seats: 41, gearing type: automatic, axle configuration: 4x2, empty load weight: 12,500 kg, maximum load weight: 5,300 kg, overall weight: 17,800 kg, emission class: euro6, color: violet, suspension: air, wheelbase: 6,030 mm, Year of construction: 2025, Equipment: ABS, air conditioning, bathroom, parking heater, Color: Traffic purple RAL 4006, unladen weight: 12500 kg, permissible total weight: 17800 kg, 35 standing places, tire size: 275/70 R22.5, 1st axle: , 2nd axle: , air suspension, air conditioning for passenger compartment: roof-mounted air conditioning unit TK Athenia S805 (32 kW) with heating function, digital destination display: Vianova 3-sided, auxiliary heater: 35 kW programmable, HVO compatible (Spheros), air conditioning for driver's compartment, stop request button, wheelchair space, stroller space, multifunction steering wheel, electronic stability program ESP, fog lights, raising/lowering function, kneeling function, multi-function display, power steering, tire pressure monitoring, floor covering: rubber, slip-resistant and abrasion-resistant, tinted glass, exterior mirrors: electric and heated, digital tachograph, electronic braking system EBS, stop brake, sunroof, retarder, twin tires, rear-view camera: and monitor (color display, 7 inches, in the dashboard), sun visor: front window electric, adjustable manually on side window, WC, speed limiter: 100 km/h, microphone for tour guide, wheelchair ramp, blind spot assistant, VECO Bus Crossway LE 12m ADAS engine Cursor 9 with an engine power of 265 kW/360 hp, 100 km/h automatic transmission Voith NXT 867.8 and retarder, 41 passenger seats, including 2 folding seats, up to 35 standing places, toilet (WC), door 1: inward-opening door 1000 mm, single-leaf, door 2: outward-opening door 1200 mm, double-leaf, roof-mounted air conditioning unit with heating function, auxiliary heater, WLAN, destination displays Vianova 3-sided, IBIS protocol, double USB port for each row of seats mounted on the side wall, video surveillance system. Codpfx Ako Agqcajteri

Condition: ready for operation (used), functionality: fully functional, A complete Bühler core wheat flour milling plant with a production capacity of 200 tonnes per day is offered for sale as a relocation project in Hungary. The mill remained in commercial production until 2025 and underwent a major refurbishment in 2020. The complete process line is available, including mechanical equipment, electrical systems, PLC automation and supporting steel structures. Includes the following: Wheat Cleaning Roller Mills Plansifters Purifiers Pneumatic Conveying Electrical Cabinets PLC Automation Motors & VFDs Steel Structures Process Piping Laboratory Equipment Dismantler capacity (Italpack) 3 t/hour Bagger capacity 12 t/hour DOCUMENTATION The offer includes the complete milling technology as shown on site, including all mechanical and electrical equipment, steel structures, piping and ancillary systems required for full operation. If this opportunity is of interest to your company, I would be pleased to provide: Crede Afmlxjpfx Aktsi Complete equipment list Additional photographs and videos Technical documentation Commercial proposal Information regarding dismantling and export logistics

Condition: good (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, table load: 10,000 kg, spindle diameter: 110 mm, spindle speed (max.): 2,000 rpm, feed length W-axis: 500 mm, workpiece weight (max.): 10,000 kg, overall weight: 23,000 kg, year of last overhaul: 2025, Manufacturer: Castel Model: Green Year of manufacture: 1997 Spindle diameter: 110 mm Spindle mount: SK50 X-axis travel: 3000 mm Y-axis travel: 1500 mm Z-axis travel: 1500 mm W-axis travel: 500 mm B-axis: 360 degrees Rapid traverse rate: 10000 mm/min Tool changer: 40 tools Coolant system Table dimensions: 1500 x 1250 mm Spindle taper: DIN 69871-40 - ISO 50 Spindle power: 27 kW Table load capacity: 10 tons Number of gear stages: 2 Control system: HEIDENHAIN TNC 415 Axes overhauled in 2025 Rotary table overhauled in 2025 Cjdpfx Ae Ad U S Rekteri Chip conveyor Dimensions (length x width x height): approx. x 7100 x 7500 x 3700 mm Total weight: 23 tons

Condition: new, Year of construction: 2024, Bending machine ZB 80/3 H eco - with foot pedal Crodpfjgh T Hrjx Aktsi - with standard roller set - three driven shafts smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout with memory - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,5 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to. - adjusting way: 120 mm - weight: 470 kg - dimensions: 900x600x1100 mm

Condition: excellent (used), Complete Pallet Manufacturing Line P+K & Vanderloo For sale is a highly productive pallet manufacturing system for four-way pallets. The main line from P+K GmbH was completely overhauled in 2020 and has been in almost no operation since then. The system efficiently covers the entire process from stringer prefabrication, main nailing, IPPC marking to nesting/stacking. Technical Data & Highlights: • Changeover times: Fully automatic size adjustment of almost all components at the push of a button! • Main line output: approx. 600 four-way pallets / 8 hours with only 2 operators • Stringer line output: High-performance cycle time of approx. 4 seconds per stringer • Control system: Siemens PLC S7 (main line) System Components: Pos. 1a: Template nailing machine P+K Type M/III/27/1500 (Year 2012 / Overhauled 2020) • Robust open frame, 1,700 mm passage width, max. nail spacing 1,500 mm. • 27 nail feeders in 3 nail hoppers (gearbox brake motor), stepper motor nail ejection. Crjdpfx As Afyn Hoktoi • 1 set (20 pcs) hammer blocks on a movable frame. For nail lengths 25–90 mm. • 11.5 kW eccentric main drive, frequency-controlled template transport (without templates). • Siemens S7 control, touch panel, memory for 99 layouts. • Pneumatic upper pallet guide (up to 9 deck boards), nail filling platform, central lubrication. Pos. 1b: Fully automatic stringer nailing machine VANDERLOO (Year 2001) • Mechanical eccentric nailing, automatic format adjustment at the push of a button. • Stringer dimensions: Length 600–1,400 mm | Width 80–150 mm (Euro & special sizes). • Independent operation: 3 block feeders with NEW buffer belts & block control. • 1 automatic board magazine, 9 nail feeders with ejection control, outfeed buffer. • Support/spare parts long-term secured through successor AVM Metaalbewerking. Pos. 2: Intermediate drive with integrated IPPC marking station (approx. 2,500 mm) • Pallet transport for intermediate operations, release manually or via automatic mode. • Auto-adjustment at the push of a button: width (700-1500 mm) & height motorized via spindle. • 2 lengthwise adjustable marking units (heating rods 2x 1,100 W), pneumatic pressing. • Temperature control unit with preheating circuit. Pos. 3: Positioning table • Further transport to stacking position, adjustable stop system, driven chain conveyors. • Synchronized auto-parallel adjustment via spindles (width 700-1500 mm). Pos. 4: Portal stacker (fully automatic with nesting) • Stable double-column portal with lifting traverse (chain) & swivel arm. Siemens S7 PLC. • Auto-gripper arm adjustment at the push of a button to pallet length. • Capacity: Sizes 600x600 to 1600x1600 mm, stacking height up to max. 3.0 m. Pos. 5 & 6: Roller conveyor & safety devices • Heavy-duty removal (approx. 5,900 mm), driven with 8 m/min. • Including all protective devices according to the layout plan. Terms of Sale: Sale ex works without warranty. Dismantling, loading and removal are the responsibility of the buyer at their own cost and risk. Price: On request (plus VAT).

Condition: used, Year of construction: 2013, functionality: fully functional, One side scanner for sorting or optimization: Crsdpfx Akev Tlgdetji Width: 30-200mm High: 13-50mm Length: 2-6m Possible to detect: Knots, wood structure, cracks, end cracks, color variations etc. Scanning speed: up to 200m/min Possible to scan different profiles

Condition: used, mileage: 95,000 km, power: 235 kW (319.51 HP), fuel type: diesel, gearing type: automatic, first registration: 07/2021, next inspection (TÜV): 07/2028, emission class: euro6, color: white, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, soot filter, Special equipment: AMG Line interior, Chrome interior package, Stainless steel pedals in sports design, AMG floor mats, Seat cover/upholstery: Artico/Dinamica imitation leather, Sports seats in front, Steering wheel (Nappa leather, flat bottom), Steering wheel (sports) with multi-function, Roof rack/base carrier, Black headliner, Night package, Diamond-look radiator grille, Exterior mirrors painted black, Black roof rails, Rear and rear window tinted, Light alloy wheels, Light alloy wheels, Side running boards (aluminum), Solid paint finish Polar White Codoz Iidpjpfx Aktori Additional equipment: Passenger airbag can be deactivated, Airbag driver/passenger side, Acoustic ambient protection (exterior sound), Ambient interior package, Chrome interior package, Seat cover/upholstery: Artico imitation leather, AC charging system, Exterior mirrors electrically adjustable and heated, both, Chrome package, DAB tuner (digital radio reception), Design and equipment line AMG Line, AMG optics/styling package 1, Diamond-look radiator grille, Light alloy wheels, Light alloy wheels, Electric motor 100 kW (hybrid drive), Electronic traction system (ETS), Lowered suspension, Vehicle setup (online services/apps), Vehicle monitoring (vehicle location system), Power windows electric front + rear, Luggage compartment cover/roller blind, Rear lights LED, Hybrid 235 kW (engine 2.0 liters - 143 kW diesel), Isofix mountings for child seat on rear seat, Body: 5-door, Automatic climate control (Thermatic), Knee airbag driver side, Instrument cluster with variable display (widescreen cockpit), Communication module (LTE) preparation Mercedes me connect, Head airbag system (window bag), Charging cable with Schuko plug, Mercedes-Benz emergency call system, Navigation system: hard drive navigation, Parking package, Driving assistance system: active parking assist, PRE-SAFE system, Wheelbase 2995 mm, Rear seat back divided/foldable, Low emissions according to emission standard Euro 6d, Side airbag (side bag) front, Service system: Extended navigation services, Seat heating front, Smartphone integrated, Mirror package, Exterior mirrors electrically foldable, Exterior mirrors with ambient lighting, Exterior/interior mirror with automatic anti-glare function, Voice control system with extended functions (MBUX), Underride protection (chrome), USB connections

Condition: new, Year of construction: 2024, functionality: fully functional, Baty SM20 profile projector - compact performer for optical inspection The Baty SM20 offers a vertical light path and a 500 mm screen, making it ideal for the inspection of medium to large workpieces. The device offers a robust design and a generous measuring range of 250 mm x 125 mm, making it ideal for precise inspections on the production floor. XLS: A simple 2-axis digital display for X and Y measurements, ideal for basic applications. MX200: This model extends the functions to include geometric measurements, including the calculation of angles, radii and distances. It also enables the creation of tolerance reports. FT2: The most advanced version offers a touchscreen interface with Fusion 2D software. This version includes optical edge detection and full reporting, including SPC diagrams and DXF overlays. Crodpfx Aeuyh N Eoktsi With a choice of magnification lenses (up to 100x) and advanced features such as digital angle adjustment and optional edge detection, the SM20 is ideal for a wide range of quality assurance and process monitoring applications. Users can also choose from a range of display options, from simple measurement functions to comprehensive reporting with the FT2-E variant.

Year of construction: 2002, condition: reconditioned (used), Fully automatic tenon and mortise system: Double-Pack type with automatic feeding with multiple cross-cutting saw with stacking system Specification: Wood input length: min. 150 mm max. 1000 mm average 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Wood output length: 6030 mm Max. wood cross-section with 10 mm tenon size: hardwood 120 cm² softwood 150 cm² Tenon design: vertical and horizontal Adhesive type: PVAC white glue, two-sided adhesive application Electrical power: Connection voltage: 400 V Control voltage: 24 V Crjdjg D Ugkepfx Aktoi 50 Hz System completely wired up to the control cabinet. Tenon length / optional wood cross-section and adhesive type can still be adjusted. Performance: 6 milling stations/min Working height: 960 mm Table width: 600 mm Adhesive application: double-sided Technical parameters: Input material: Input length of parts (min. - max.): 150-1000 mm Part width (min. - max.): 40-155 mm Part thickness (min. - max.): 20-80 mm Working height: 960 mm Bundle width: 600 mm Glue application: double-sided application (on both sides of the

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain to finger-jointing press (foldable) - Drying paternoster (approx. 7 m, board length up to 6 m) - Cutting and zero-cutting saw - Conveyor belt for waste wood disposal Crsdpfxewclkys Aktji - Stacking machine - Strip magazine not for sale - Package cross conveyor The machine is in very good condition and has had very little use. The machine is still assembled but available immediately.

Condition: good (used), Grecon notching system Infeed with cross buffer for packet formation 2 milling machines connected, 600 mm table width each milling machine with glue rollers - automatic transfer - continuous press feed - crosscut saw - outfeed roller conveyor with cross transfer Input widths 500 - 4000 mm Cedpfx Aeh I Dufjktjri The system has been dismantled and is available for immediate delivery. The control system is defective; a new control system with program is included. It has not been installed, and the program has not been tested.

Year of construction: 2010, condition: ready for operation (used), Fully automatic finger jointing line: type double pack Machine is dismantled Machine is checked with functional guarantee Specification: Wood input length: min. 150 mm max. 1000 mm average 400 mm wood cross-section: min. 20 x 40 mm max. 80 x 180 Wood output length: 6030 mm Max. Wood cross section at 10 mm tine size: hardwood 120 cm² softwood 150 cm² Tine design vertical and horizontal Glue type. PVAC white glue, 2-sided glue application Electric power: Supply voltage: 400 V Control voltage: 24 V 50 Hz System completely wired up to the control cabinet. Tine length / possibly wood cross-section and glue type can still be adapted capacity: 6 milling tables/ min working height: 960mm table width: 600 mm Glue application: double-sided application With endless packaging Technical parameters: Input material: Csdpjncd Utefx Aktsri Input length of parts (min. - max.): 150-1000mm Part width (min. - max.): 40-155 Part thickness (min. - max.): 20-80mm Working height : 960mm Bundle width: 600mm Glue application: double-sided application (on both sides of the

Condition: excellent (used), Year of construction: 2022, For sale: Romer powder coating line. Equipment manufactured in 2022, lightly used. It was used for coating armored doors. The powder coating line consists of: 1. Oven (doors on both sides, 5 coating tracks) Model: Romer SW Internal dimensions: 3000 x 1500 x 2200 mm The oven does not have a heating burner, it was previously used with a gas burner. A gas or electric burner can be installed if required. 2. Romer powder coating booth extraction wall Model: Romer KPO-3ZN 3. Conveyor system Overall dimensions: length 5900 mm x width 14000 mm, 2 trolleys with 5 tracks each. 4. Crossbeams with wheels (20 pcs.) Cedoyzw Hwspfx Akteri Currently, the line is dismantled and ready for transport.

Condition: new, mileage: 15 km, power: 129 kW (175.39 HP), first registration: 04/2026, fuel type: diesel, fuel: diesel, brakes: retarder, color: other, gearing type: automatic, emission class: euro6, number of seats: 24, total length: 7,700 mm, total height: 3,100 mm, Equipment: ABS, air conditioning, cruise control, retarder, = Additional Options and Accessories = Crodpfxoy Eduij Aktji - Air conditioning for the driver - Air conditioning system = Further Information = Damage: none = Company Information = We are an international company based in Belgium, in the Brussels area (+/-20 km). Belgian Bus Sales is your ideal partner for the buying and selling of used buses and has a large parking area that serves as a showroom. We always have a large number of buses of all brands, capacities, models, and in every price range in stock. We can find the right tourist, school, or city bus for you, tailored to your needs and budget. All information is provided without guarantee. Errors, prior sales, and typographical errors excepted. Opening hours for viewing the used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. (Mowimy po Polsku Agata) We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more.