Used Promag 30 F for sale (51,036)

Condition: used, functionality: fully functional, Year of construction: 1993, operating hours: 9,378 h, load capacity: 3,000 kg, fuel type: diesel, mast type: telescopic, construction height: 2,630 mm, fork length: 1,300 mm, drive type: Diesel, Diesel forklift Mast type: Telescopic Condition: Ready for operation and fully functional Technical condition: Normal Fpodpsyx Nunefx Ahnjh Front tyre type: Superelastic Rear tyre type: Superelastic

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33802035478, empty load weight: 4,660 kg, maximum load weight: 33,340 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 10,450 mm, total width: 2,550 mm, total height: 1,325 mm, suspension: air, tire size: 385/55 R22.5", tire condition: 100 %, color: grey-black, Chassis, semi-trailer, container Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin and 2 kingpin positions Front locking on tipper ram mounting with lateral wedge locks, rear locking on continuous pivot shaft with return spring Without subframe for self-supporting containers Container attachments: Locking crossbeam, 2-fold for locking 1 x 30 ft container 24 ton, 2-speed landing gear, single-sided operation, with straight lower part, without push-out compensation Free support leg spacing or free rear swivel radius approx. 1850 mm 2 chock blocks with holder Aluminum side underrun protection Without underrun protection Semi-fender With anti-spray flaps according to EC Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw fitting, fixed part, NW 48 mm. (without hose connection). Attention! Tilting angle limited! Operation hydraulically via truck auxiliary drive Hydraulic connection with hose and HDK screw fitting NW = 48 mm with knurled nut Axles + Suspension BPW disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" Reduces tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport) up to 44 tons total weight Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, operation "3x brakes" (start-up assistance is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h) Braking system 2-line pneumatic braking system Color-coded line routing for easy maintenance. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line 24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and Tires 385/55 R22.5" manufacturer's choice Fpjdpfjzaz Tkox Ahnjh Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Country of approval / Signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for license plate holder, single row Contour marking with reflective tape according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau "10-year warranty against rust" Support legs black coated

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Bezner round rod milling machine Working range (milling range) 30 - 120mm max. raw wood 180mm max. bracing 60mm Shortest timber length 600mm Fodpfx Ahjrfxilsnoph

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing unit, including DIA tools • Jointing capacity up to 40 mm • Workpiece thickness up to 3 mm • Combination milling station, radius R 2.5 mm Technical Description: - Hot melt adhesive application to the workpiece for edge materials up to 3 mm - Workpiece thickness up to 60 mm without jointing unit, up to 40 mm with jointing unit - Maintenance-free, coated gluepot - HF end-trimming unit (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable cutter heads (combination version) and fine adjustment from the operator side - Free spaces for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment of the end-trimming saw - Signal lamp for workpiece flow Fedpfx Ajx S Hmzshnoph - Robust chain feed - Ergonomically arranged control panel - Double roller upper pressure beam - Aggregate windows on machine rear and operator side - PLC control with touchscreen included Technical Data: - Feed rate: 10 m/min - Panel thickness: 8 – 40 mm - Weight: approx. 1550 kg (depending on configuration) - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spray system (2014) • 1 pc hot air unit for visual zero joint using special edge materials • Including pneumatic gluepot positioning • Including cooling and antistatic spray system • Including 2 additional quick-change edge channels • Including special version corner rounding unit; max. workpiece thickness 60 mm, min. length 200 mm - Exclusively for Hebrock 3000 series edgebanders - Retrofitting possible at extra cost upon request Technical Data (special unit): - Max. panel thickness: 40 mm - Edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (only Airtronic), electronically controlled - Ready for operation after approx. 2 min Upgrade to 8 mm edge thickness possible; max. workpiece thickness 40 mm • Including pneumatic saw adjustment (special version, min. workpiece thickness 8 mm) • 3-point pneumatic milling shift • Selector for radius/chamfer/flush for combination milling stations, eliminating manual changeover (PLC control required) Buffing station (swab): 1 pc Corner rounding unit: 1 pc incl. combination tooling and pneumatic radius/chamfer adjustment, max. 40 mm workpiece thickness, min. 300 mm workpiece length, Radius R 2.0 mm Radius scraper: 1 pc with pneumatic lift, Radius R 2.0 mm Flat scraper: 1 pc with pneumatic actuation Complete chassis: 1 pc Glue station quick-change system incl. glue discharge system (downward outlet in preparation), 1 pc (no second gluepot), machine can process PU adhesive Grooving unit (vertical for panel): 1 pc incl. pneumatic lift, vertical groove, groove width 8.2 mm, groove depth 8.0 mm, distance from panel edge 14.0 mm; special motor version with higher performance Extraction for internal jointing unit: 1 pc connected to machine's extraction manifold Corner rounding cutter ball bearings: 24.1 mm (1 pc), 24.2 mm (1 pc) Edge protection spray system: 1 pc for sensitive edge materials Combined spray system (separating and cleaning agent): 1 pc Location: Supplier stock

Condition: new, Year of construction: 2011, overall weight: 1,250 kg, volume flow: 630 m³/h, power: 15 kW (20.39 HP), type of cooling: water, rotational speed (max.): 2,930 rpm, protection type (IP code): IP5K5, For sale is a new vacuum pump in original packaging: OERLIKON LEYBOLD VACUUM Technical data: Forevacuum pump station with dry-compressing forepump EXTRUVAC III SP630F NOS – New old stock Electric motor, water-cooled With VEGA VEGABAR 52 pressure transmitter With spring-closing valve from AMG-Pesch Manual in German and English Further technical details: see images Fpodjy D Rbmjpfx Ahnjh

Condition: used, Year of construction: 2012, total height: 1,600 mm, total length: 5,250 mm, total width: 1,440 mm, Edgebander HEBROCK AKV 3006 DK FS maximum edge thickness 3/8 mm min/max. workpiece thickness 10/40 mm min. workpiece length approximately 200 mm min. workpiece width approx. 80 mm feed speed about 10 m/Min. ready in about 6 minutes. maximum power consumption 12 kW electrical connection 400 V / 3 Ph / 50 Hz Pre-mill Glue unit Pressure roller Chopping saw Milling unit Milling unit Corner rounder Radius scraper Flat scraper Cleaning unit Fpsdpfx Aswnhb Sjhnoh Dimensions (length x width x height) 5250x1445x1600 mm, weight 1550kg - Year: 2012 - Documentation available: No - CE certificate present: No - Transport dimensions: 5250mm x 1445mm x 1600mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, mileage: 2,600 km, power: 18 kW (24.47 HP), first registration: 05/1975, fuel type: diesel, overall weight: 1,300 kg, color: green, gearing type: mechanical, suspension: other, operating hours: 2,600 h, Equipment: all wheel drive, 1. First owner, new inspection (MOT/emissions test), diesel, manual transmission, all-wheel drive, first registration: May 23, 1975, 2,600 operating hours, Holder rotary tiller, original condition, permissible total weight: 1,300 kg, first-owner version, lawn tires also possible (both are available). FOR US, THE CONDITION AND OUR GUT FEELING ARE DECISIVE; THE PRICE IS SECONDARY. If you have any further questions, please do not hesitate to contact Mr. Schlägel at the following number. //*TRADE-IN, PART EXCHANGE, OR FINANCING OF YOUR VEHICLE IS POSSIBLE! All information is without guarantee.* You can find more offers on our website: The description and specified data do not constitute a warranty and are not binding. The purchase contract concluded at the car dealership when purchasing the vehicle is binding. Errors and prior sale are subject to change! Fjdovictmopfx Ahnjph

Condition: used, functionality: fully functional, Jointer-planer, thicknesser SCM MiniMax FS 30 Specifications: • Condition – used, after a comprehensive overhaul • Manufacturer – SCM MiniMax series Fpjdpfsza E H Iox Ahnoh • Model – FS 30 • Working width – 300 mm • Working height of the thicknesser – 240 mm • Table length – 149 cm • Noise-reducing combs near the shaft • Motor power – 1.85 kW (220V – can be changed to 380V) • 3-knife shaft for traditional knives (diameter 70 mm) • Side table 43 x 22 cm for a drill • Head with a drill chuck for drills with a diameter of 16 mm • Original paint • Weight 260 kg • Overall dimensions 150 x 105 x 102 cm (length x width x height) Additional information: • The machine is in good technical condition and ready for immediate use • The presented photos show the actual condition of the item being sold • Possibility to switch on and test the device on-site • Free training on how to operate the machine (at the company's premises) • The price listed in the auction does not include VAT and transport costs Financing and transport: • We arrange transport using the MDD fleet, courier companies, or external carriers • We offer financial support in the form of leasing or lease financing

Condition: used, mileage: 71,480 km, power: 167 kW (227.06 HP), first registration: 08/2002, overall weight: 13,000 kg, fuel type: diesel, color: red, axle configuration: 4x2, empty load weight: 12,180 kg, driver cabin: day cab, gearing type: mechanical, suspension: steel, Year of construction: 2002, operating hours: 2,161 h, Equipment: differential lock, hydraulics, low noise, Fire Brigade – Turntable Ladder Vehicle: - Iveco - Eurocargo 130 E 24 - First registered: 08/01/2002 - 6-cylinder Iveco diesel engine, 5681ccm; 227 hp - 71,480 km; 6,864 engine hours - Differential lock - Auxiliary drive - 6-speed manual transmission - 3 seats - External power supply 220V - Siren / flashing lights - 989cm x 235cm x 335cm (l x w x h) - Unladen weight: 12,180 kg; permissible total weight: 13,000 kg Fpsdjqxt Nuepfx Ahneh Turntable ladder superstructure: WARNING: TURNTABLE LADDER SUPERSTRUCTURE CURRENTLY NOT FUNCTIONAL – ELECTRICAL MALFUNCTION! - Camiva / Metz - EPAS 30M Iveco - 33m height - 2,161 operating hours - Hydraulic outriggers - Basket in lying position, max. 3 people, 270 kg - Stand-alone and basket controls - Storage compartments + equipment holders A video of this offer can be found at: You can find our entire vehicle inventory at: Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 11/1989, total width: 2,490 mm, suspension: steel, tire size: 385/65, tire condition: 30 %, wheelbase: 5,460 mm, color: other, Year of construction: 1989, = Additional options and accessories = - Leaf spring = More information = Axle configuration Tyre size: 385/65 Make axles: Fruehauf Tyre profile: 30% Brakes: drum brakes Suspension: leaf suspension Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Weights Empty weight: 2.840 kg Carrying capacity: 27.160 kg Fedpey T N E Aofx Ahnsph GVW: 30.000 kg Identification Registration number: OB-15-HG

Condition: ready for operation (used), Year of construction: 2017, operating hours: 6,417 h, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, overall weight: 4,400 kg, number of axes: 4, This 4-axis AgieCharmilles FORM 30 was manufactured in 2017. It features a stroke of 600mm x 400mm x 400mm, with axis speeds up to 6 m/min. The machine can handle workpiece weights up to 1000kg and dimensions of 1000 x 700 x 400 mm. It includes a dielectric unit with a 750l capacity and a robust weight of 4400kg. Consider the opportunity to buy this AgieCharmilles FORM 30 die-sinking EDM machine. Contact us for more information about this machine. • Axis speed (X/Y/Z): 4 / 4 / 6 m/min • Position reading accuracy (X/Y/Z): 0.1 µm • C-axis (standard) rotation speed: 0–100 rpm • Work tank size: 1200 x 800 x 500 mm • Worktable size: 800 x 600 mm Fedpox Nr N Nefx Ahnsph • Max electrode weight: 100 kg • Max workpiece weight: 1000 kg • Workpiece dimensions: 1000 x 700 x 400 mm • Dielectric unit capacity: 750 l • Generator type: ISPG • User interface: AC FORM HMI • Power supply: 3 x 380 V, 3-phase, 50 Hz

Condition: used, axle configuration: 3 axles, first registration: 04/2002, Multiple available, 30 pieces, different years of manufacture and manufacturers Prices from 2100¤ We have 20-foot, 3 and 2 axle 40-foot, different years of manufacture 3x leaf-sprung All together bulk purchase special price Fedpfovm I N Usx Ahneph

Condition: used, empty load weight: 5,380 kg, maximum load weight: 33,620 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 06/2017, loading space length: 7,600 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, loading space volume: 26 m³, total length: 7,600 mm, suspension: air, tire size: 385/65 22,5, tire condition: 50 %, color: red, Year of construction: 2017, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 41102 Langendorf, SKA 24/30 * Year of construction: 2017 * ABS, Anti-lock Braking System * EBS, electronic brake system * Air suspension * Lift axle * Used tarpaulin * Air connection, coupling head (red + yellow) Fpjdpfxsy Davmo Ahnjh * Connector plug, 2x7-pin * Connector plug, 15-pin * Lifting and lowering system * Storage compartment/toolbox * Aluminum tipper body * Platform * Roll-up tarpaulin * Swing door * Suspension: Air * Total weight: 39,000 kg * Unladen weight: 5,380 kg * Payload: 33,620 kg * Permissible total weight: 39,000 kg * Axle manufacturer: BPW * Tire condition, 1st axle: 30% - 40% - Tire size: 385/65 R22.5 * Tire condition, 2nd axle: 70% - 60% - Tire size: 385/65 R22.5 * Tire condition, 3rd axle: 40% - 60% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Internal dimensions: L=7600 mm, W=2300 mm, H=1500 mm * Internal volume*: 26 m² * Pallet spaces: 19 * Wabco air suspension * Lift axle * Swing door, resting type Disclaimer: Subject to changes, prior sale, and errors. More pictures and videos can be found on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and uncomplicated financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transportation of commercial vehicles Please contact our trained specialists, we will be happy to advise you.

Condition: used, Year of construction: 1955, functionality: fully functional, machine/vehicle number: D08L/8075, Offer Number: D08L/8075 Machinetype: straightening and cutting machine Make: WAFIOS Type: DRf/30 Constr. year: 1955 diameter range: 7-16 mm Fjdpfxowi Svis Ahneph cutting length: 6000 mm speed - meter/min: 65 Location: In our warehouse

Condition: ready for operation (used), Vibratory feeder, bowl feeder, vibratory parts feeder, Used machine Manufacturer: MHK Type: KWF 30 Overall dimensions: Fsdpfx Aheyyckrsneph Width: 300 mm Depth: 300 mm Height: 220 mm Electrical data: 230V, 50Hz, 6A Bowl size: 190–260 mm

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, type KT36 Year of construction: 2001 Optionally available: Fsdpjk Aa Ukofx Ahnsph Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, type KT36 Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. Fpedpek Abuijfx Ahnoh With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2021, Transnorm belt curve conveyor left 30°-1270-1100-IR900 RA2303 Technical data: Fjdpfet D R R Sox Ahneph Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees middler conveying speed (v m/s): 1,0 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 1,5 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, maximum load weight: 36,540 kg, overall weight: 48,500 kg, axle configuration: 3 axles, first registration: 06/2020, next inspection (TÜV): 06/2028, Year of construction: 2020, Equipment: ABS, Internal vehicle number: G400133 En route to our premises in Kaufungen - Kassel, Germany, available immediately. For more information, please contact Luis Lucena. Low-bed trailer LANGENDORF SATÜ 30 - 10.0 m with wheel recesses Year of manufacture: 2020 Remote control 3 axles - 2 steered - 1 liftable Length: 13,900 mm Loading area: 10,000 mm Technically permissible total weight: 48,500 kg Unladen weight: 11,960 kg Financing example: * Internal number: G400133 * Purchase price: €65,900.00 * Down payment: 10% * Term: 60 Fpodpfjy A Uxaex Ahnjh * Monthly installment: €1,025.02 Residual value: €11,380.00 If you are interested in this offer or would like to tailor it to your needs, please contact us via Mr. Enchev. We look forward to hearing from you. Subject to errors. We will gladly accept your used vehicle in part exchange. Financing is available directly with us. GOLEC COMMERCIAL VEHICLES GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, Year of construction: 2000, machine/vehicle number: 0-201-24-5315, functionality: fully functional, operating hours: 999,999 h, power: 12 kW (16.32 HP), input voltage: 400 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 150 mm, number of axes: 3, number of slots in tool magazine: 12, controller manufacturer: HOMAG, actuation type: electric, total height: 2,650 mm, total length: 5,750 mm, total width: 4,000 mm, overall weight: 5,885 kg, year of last overhaul: 2023, Equipment: CE marking, documentation/manual, The machine is in working order and is being replaced due to the purchase of a new machine. Fodpfx Ahjy Tmc Eenoph The price includes an associated vacuum pump.

Condition: used, Year of construction: 2012, operating hours: 20,233 h, Used Tetra Pak Cap Applicator 30/Flex for Helicap23 2012 The Tetra Pak Cap Applicator 30/Flex for Helicap23 is a capping machine designed and manufactured by Tetra Pak® in 2012. This machine is specifically designed for applying plastic screw caps onto containers, ensuring secure sealing and efficient production. With a speed of 9600 bottles per hour (BPH), it offers a high-capacity solution for the packaging industry. Specifications: Manufacturer: Tetra Pak® Model: 30 Flex For Helicap 23 Year: 2012 Speed: 9600 BPH This capping machine in suitable for 1000 slim format Fpodpfx Aevgufpshnjh Cap Type and Rotation Direction: The capping machine is compatible with plastic screw caps, providing a reliable closure mechanism. The rotation direction of the machine is clockwise, ensuring proper application of the caps onto the containers. Current State and Safety Features: Currently, the Tetra Pak Cap Applicator 30/Flex for Helicap23 is in storage. It is equipped with safety features to ensure the well-being of operators and maintain a safe working environment. Manuals and Machine Hours: Accompanying the machine are the necessary manuals, which provide instructions for its operation, maintenance, and troubleshooting. These resources facilitate efficient usage and upkeep of the capping machine. As for its usage history, the machine has been operated for approximately 20,233 hours. Electrical Data: The machine requires an electrical supply of V: 400, kW: 6.7, and operates at a frequency of 60 Hz. These specifications ensure the machine’s optimal performance and power consumption within the specified parameters. Conclusion The Tetra Pak Cap Applicator 30/Flex for Helicap23 is a reliable capping machine manufactured by Tetra Pak® in 2012. With its capability to apply plastic screw caps at a speed of 9600 BPH, it offers a high-capacity solution for efficient packaging processes. Equipped with safety features and accompanied by manuals, this capping machine is designed to provide secure sealing and consistent performance, making it a valuable asset for the packaging industry.

Condition: used, Year of construction: 2013, functionality: fully functional, operating hours: 515 h, input voltage: 400 V, input current: 74 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 5,020 mm, travel distance Y-axis: 1,380 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 450 mm, workpiece weight (max.): 7,250 kg, number of axes: 4, number of slots in tool magazine: 36, controller manufacturer: SCM, actuation type: electric, total height: 3,000 mm, total length: 9,778 mm, total width: 6,158 mm, overall weight: 7,250 kg, table length: 5,680 mm, table width: 1,300 mm, Equipment: CE marking, documentation/manual, We offer a four-axis machining center, the SCM ACCORD 30 FX. The machine is configured for the production of window and door joinery. It features an additional BRC unit and is equipped with two tool magazines and a good vacuum pump. The machine has been used very little and is practically a new unit, which we can confirm through the SCM Group, from which it was purchased as new. It is possible to obtain a certificate and warranty from the manufacturer, SCM. Brand: SCM Type: Accord 30 FX Model: ACCORD 30 FX Serial number: AA2/002707 Year of manufacture: 2013 Fpjdpfx Ahsy Udznsnjh Weight: 7250 kg If you have any questions or require further information, please send us a message or contact us by phone.

Condition: refurbished (used), Year of construction: 2019, operating hours: 5,225 h, overall weight: 25,000 kg, Doppstadt DW 3060 Biopower Type F - Year of manufacture: 2019 - Operating hours: 5,225 - Engine: MTU R61300 with 490 HP - AD BLUE - Weight: 25,000 kg - Remote control - Humidification system - Rear conveyor 5.5 m - Overband magnet - Hydraulic drive (self-propelled) - Central lubrication Fedpfoyxkwqsx Ahneph Machine is overhauled and immediately available.

Condition: excellent (used), functionality: fully functional, Pressure: 130 t Bending length: 3150 mm Distance between uprights: 2600 mm Motor power: 15 kW Control: CYBELEC VisiTouch Machine weight approx.: 10,900 kg Space requirement approx.: 3990x1750x2900 mm Fjdsyvh Dvjpfx Ahneph Equipment: - Controlled axes: Y1, Y2, X, R, Z1, Z2, X1 - Fully dynamic hydraulic crowning

Condition: used, Year of construction: 1988, total height: 5,200 mm, total width: 6,200 mm, total length: 6,500 mm, overall weight: 55,000 kg, spindle motor power: 30,000 W, Heavy CNC bed milling machine by Droop & Rein in solid cast design for machining large and heavy workpieces. The machine is equipped with a Heidenhain TNC 430 control and was overhauled in 2002.Equipped with a powerful 30 kW milling spindle, SK50 holder, and a swiveling milling head (±45°) for flexible machining operations. The robust construction ensures high stability and precision even in demanding machining tasks.The machine is powered on and can be inspected at any time. Travel Z-axis: 1450 - mm Travel X-axis: 2400 - mm Tool holder type: SK 50 Speed range workpiece spindles: 80 - 3150 rpm Weight approx.: 55,000 kg Travel Y-axis: 2000 - mm Dimensions (LxWxH) approx.: 6500 x 6200 x 5200 mm Power working spindle max.: 30 kW Fpjdpfxoy S S Nbj Ahneh Control: Heidenhain TNC 430 Year of construction: 1,988 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes