Used Punch Tool for sale (36,876)

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, Ksdpfjiqhgqjx Ab Tjln -Manufacturer: Mubea, punching tool Ø 75 mm -Type: Mubea 75 5-9 Mount Ø 50 mm -Matrix: Ø 150 mm -Overall dimensions: Ø 150 x 120 mm -Weight: 6.6 kg

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, Kledpfx Abeiqhgue Tsn -Manufacturer: Mubea, punching tool Ø 60 mm -Type: Mubea 60 5-12 Mount Ø 50 mm -Matrix: Ø 150 mm -Overall dimensions: Ø 150 x 120 mm -Weight: 6.7 kg

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, punching die, rotary die Kledpfsiqhg Hex Ab Tjn -Manufacturer: Mubea, die-cutting die, round die Ø 52 mm -Type: Mubea 52 -Overall dimensions: Ø 150 x 40 mm -Weight: 4.7 kg

Condition: good (used), Die holder, notching tool, punching tool, punch, punching die, punching punch, punching die, round die, die reduction Klodpfoiqhhcjx Ab Ten -Manufacturer: Mubea, punching tool holder die reduction -Type: 105 - 80 mm mounts -Dimensions total: Ø 150 x 60 mm -Weight: 4.7 kg

Condition: used, Punching Bracket, Punching Unit SUPRA-CLAP Type C12.300 Throat Depth: 300 mm Punching Capacity: 0.3 to 2 mm material thickness, depending on cutting clearance Hole Diameter: Ø 2 to Ø 12 mm Distance between lower die and punch holder: 8.5 mm Distance between upper and lower bracket: 13 mm Punch Shank Diameter: Ø 12 mm Cutting Plate Outer Diameter: Ø 30 mm Cutting Plate Thickness: 12 mm Drop-through Opening in Punching Bracket: 14.5 mm Installation Height: approx. 145 mm - Standard punch length 70 mm with 60° head (Punch per DIN 9861 Form C) - Punch holder with spring stripper and return spring - Mounting slot 50 x 13.5 mm and 8 mm locating pin Punching Bracket Dimensions (L x W x H): 390 x 36 x 145 mm Weight: 4 kg Good condition 9 units available, price per unit 3 units with tool inserts (punch + die) 6 units without tool inserts (without punch + without die) Klodpjxbh Rdefx Ab Ton

Condition: used, Punching bracket, punching unit SUPRA-CLAP / CEWE Type PAE 50 - 400 3GN 3P1 Throat depth: 400 mm Punching capacity: max. 10 mm material thickness Kedexbh N Topfx Ab Tsln Hole diameter: max. Ø 50 mm Distance between upper and lower bracket: 19 mm Punch holder: Ø 78 mm Cutting plate outer diameter: Ø 78 mm Cutting plate thickness: 20 mm Drop-out opening in punching bracket: 52 mm Installation height: approx. 220 mm - Punch holder as a punch unit with punch mount and material stripper with disc springs - Punch holder rotation-proof guided and spring-loaded - Punch length 97 mm, shank Ø 35 / 50 mm - Round hole tool: punch Ø 41 mm and die Ø 41.5 mm - Long fixing hole: 270 x 13.5 mm Dimensions of punching bracket (L x W x H): 550 x 95 x 220 mm Weight: 27.5 kg Good condition 4 units available, price per unit 3 units with Ø 41 mm punch tool 1 unit with Ø 43 mm punch tool

Condition: used, Punching bracket, punching unit SUPRA-CLAP type C7 300 Throat depth: 300 mm Punching capacity: max. 2 mm material thickness Hole diameter: Ø 2 to Ø 7 mm Distance between lower die and punch holder: 7 mm Distance between upper and lower bracket: 12 mm Kledpfx Aexbh N Hsb Ten Punch shank: Ø 7 mm Die outer diameter: Ø 20 mm Die thickness: 12 mm Pass-through opening in punching bracket: 11 mm Installation height: 142 mm - Standard punch length 70 mm with 60° head - Equipped with a round hole punch approx. Ø3 to 4 mm - Punch holder with stripping spring and return spring - Mounting slot 50 x 14 mm and 8 mm locating pin Dimensions punching bracket L x W x H: 390 x 26 x 145 mm Weight: 3.7 kg Good condition 13 pieces available, price per piece

Condition: used, Offer 41414 Klodpjxhfhmofx Ab Tjn Guide unit for punching tool suitable for AMADA type EMK 3612

Year of construction: 2019, condition: good (used), machine/vehicle number: 157, Offer 22273 Technical data: - Stroke 30 mm - Air consumption per stroke 5 l - Pneumatic connection 8 bar - Space requirement approx. W 500 x H 550 x D 500 mm - weight approx. 70 kg - with: - foot switch - machine base mobile W 600 x H 830 mm Klodpfsiv Hz Djx Ab Tsn - Div. tools HUECK

Condition: ready for operation (used), Schüco Tool Pressing Tool Punching Tool, Klsdpfx Abjd Sc D Se Ton Item No.293900, 290146-02, 299259, 290146, 293338, 293902, 296198, 299905, 296168, 293901, 280162, 296548, 293354, 287568, 290146-02, 296170, 296159, 297755, 293807, 296199, 299372, 293899, 282028-04, 283072-02, 280222-05 and 5pc. Without number

Condition: used, functionality: fully functional, machine/vehicle number: 2097, Murata CNC Turret Punching Machine Model No. C20000 P43608 Turret with 24 tool stations The machine is in impeccable condition and fully operational The price includes: - Computer with monitor and mouse for transferring DWG and DXF files to the machine. - Various punching tools, dies, stripping tools, including high-quality Ista drawer cabinets for storage. (All 4 drawer units are full.) - Various spare parts Kodpfx Ajxalz Djb Teln - The yellow safety barriers - Safety floor mats with emergency stop function - Technical documentation and spare parts manual

Condition: used, diameter div. number 26x Kljdpoylpzgsfx Ab Tsn tool adaptor SK 40

Condition: used, Manufacturer: TOOL TEMP Kedpfx Aeylaatob Tsln

Condition: good (used), For sale: PWB Swiss measuring device, model TOOL MASTER 310 Very good condition, complete, ready for operation Package includes: • TMA 21 control panel • LED displays • Dial gauge • Measuring socket for holders Features: • X and Z axis measurement • Tool setting and calibration for CNC tools • Easy operation Kljdpfsw Humlox Ab Tjn • Length and diameter measurement Original user manual included Brand: PWB Swiss Model: Tool Master 310

Condition: excellent (used), For sale, Form thermostat - Tool Temp TT-188 Max. heating temperature - 90°C Medium - water Power: 9850 Watts The device has: - vacuum pump vaccum Ksdpfxjvzb Nqj Ab Teln - vacuum tank - function of sucking the medium out of the mold - the device can be integrated with the machine, maintenance-free

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Colour: Silvergrey RAL 7001 Klodox Emfkspfx Ab Ten Weight: Approx. 67 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Suitable for both water and oil media Temperature range max.: Water: 90 °C Oil: 150 °C Heating capacity: Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Cooling capacity: 45 kW at 90 °C Pump capacity: Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Vacuum mode: max. 8 m H₂O Tank capacity: Min. 16 litres, max. 20 litres Connections: Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread

Condition: ready for operation (used), Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT138 B SPEZ, used machine Manufacturer: Tool-Temp Type: TT138 B SPEZ Overall dimensions: 1240 × 480 × 1400 mm (incl. castors) Weight: Approx. 180 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) with digital display (set and actual temperature) Automatic temperature monitoring Electronic flow control with digital display and automatic minimum-flow control Pressure-increasing pump Temperature measurement at the mould Pressure relief system Leak stopper and mould drainage using compressed air Automatic filling (automatic medium fill) Max. temperature range: Water: up to 160 °C Heating capacity: 24 kW — switchable in stages (6/18), automatic switching of required heating power Cooling capacity: Indirect: approx. 85 kW at 160 °C Direct: approx. 60 kW at 60 °C Pump capacity: Motor: 1.8 kW Pressure mode: max. 6.5 bar | max. 75 l/min Klodpsx Hgmwefx Ab Tjn Vacuum mode: max. 8 m H₂O Seal-less magnetic coupling drive (no mechanical seal) Connections: Medium (water): ¾" BSP female thread Cooling water inlet: 1" BSP female thread (with water filter) Cooling water outlet: 1" BSP male thread Compressed air (for mould drainage/venting): ¼" BSP female thread

Condition: good (used), Facom Jet Tool Cart with 8 Drawers Perfect condition, Facom tools. Made in France. Accessories as shown in the photos. Price is for the entire unit. Kjdpfxeyg Ea Ue Ab Toln

Condition: good (used), Renz Punch Super 700 Perforator This machine is in very good condition. Electric drive, foot pedal control. Includes a 3:1 square perforation tool with a cutout for the hanger. Manufacturer’s description: Perforation device with a working width of up to 700 mm Designed for continuous operation and heavy loads Foot pedal-activated operation Perforation of up to 40 sheets (4.5 mm) in a single cycle Quick and easy replacement of perforation strips Available with or without a hanger cutout Two-piece strips can be used – one tool allows for perforation of both books without a hanger cutout and calendars with a hanger cutout. Kledpjyg Eabsfx Ab Ten Requires a 3-phase, 380V power supply. Weight: 400 kg

Year of construction: 2021, condition: as good as new (ex-display), functionality: fully functional, Because of CANCELLED PROJECT of the construction of a nuclear power plant, we are able to offer you.... NEVER USED - complete metal forming / processing plant (about 80 machines) Kledpfovldr Aex Ab Ten Please contact us for full machinery list and more photos. Thank you!

Condition: excellent (used), For sale: professional installation tool (SETTING TOOL) for KOENIG EXPANDER® components, manufactured by SFC KOENIG. Model: ExTool 040-2 Type: Setting Tool / Installation Tool Application: Installation and activation of KOENIG EXPANDER® components Manufactured in: Germany The device is designed for controlled setting (activation) of plugs, restrictors, and valves of KOENIG EXPANDER® into precision bores – without threading and without heat treatment. — Condition Kljdpsyc Ig Asfx Ab Tjn • Very good technical and visual condition • No cracks or damage • Working element is straight, clean, and unworn • Normal, minor signs of use • Complete set exactly as shown in the pictures — Application • Installation of KOENIG EXPANDER® plugs • Automotive industry • Precision hydraulics • Hydraulic blocks, housings, machine components • Series production and maintenance — Set includes • KOENIG EXPANDER® ExTool 040-2 installation tool • Original carrying case • Working hose • Working container / reservoir • Manufacturer's manual • Accessories as shown in the photos

Condition: excellent (used), Year of construction: 1996, operating hours: 73 h, Complete equipment for orbital welding and bevelling of pipes in all kinds of materials and all kinds of thicknesses in diameter from 20 to 170mm for sale. Manuals and part lists are included. In addition to welding equipment, a TRI-Tool 206B and a Wachs SDB 103/3 bevelling machine are included. They will efficiently make all kinds of joints like V, J or U bevels. The equipment can be delivered free of charge "to the door" anywhere in Europa and up to 1 week of training is included. All three included welding heads are of the same type (original Dimetrics FFIP heads- Full Function In Place) with both oscillation and AVC. (Automatic arc length) All three welding heads each have their own feeder for 100mm wire spools. The equipment consists of the following: *1 pc Dimetric Gold Track 3 (hour meter shows 72.6 hours "weld time" and 1088 hours "stand by" *1 pc welding head FFIP Small for Ø20- Ø 50mm *1 pc ditto but Medium, for Ø 48 – 90mm *1 pc ditto but Large, for 100-170 mm Completely ready to weld with all cables and remote control The welding heads are in solid transport boxes. Furthermore; *1 case with Tri-Tool 206 B bevelling machine pneumatic drive, 2"-6" •very little used • Bevel pipes from 2" to 6" (60.3 to 168.28mm) • Wall thickness up to 22.23mm) *1 case with Wachs SDB 103/3 pneumatic drive Capacity from 1" to 3'" well used but in good working condition. Kljdpfxeycvifj Ab Tjn Dimetric's equipment has welded approximately 70% of the world's nuclear power plants, - both due to precision, operational reliability and robustness. Dimetrics was also the first to be certified to weld hydraulic systems on aircraft. Dimetrics (now together with Canadian Liburdi) is still a leader in welding nuclear power plants. For example, "Framatome" is responsible for the construction of 13 new nuclear power plants in France - and they only use welding equipment from Liburdi - Dimetrics, now Gold Track 7. All welding heads can still run on the latest Dimetrics welding machines. My equipment is from the 90s, and I got it from a shipyard that had produced nuclear-powered submarines where this particular equipment was on standby, but was never used for anything other than testing and training. A new piece of equipment with only one welding head and the same functions (AVC and oscillation) quickly costs from the very cheapest some €75.000 and up- of course without bevelling machines. I bought the equipment for use on a job that never materialised (!), and because I had 4 other orbital machines from before, this was rarely used. Now I am stopping working with orbital welding after 50 years in the industry, and continue as a consultant and supplier. This gives me time to load the equipment into a cabinet trailer, connect it to my camper and deliver it anywhere. Price complete delivered anywhere in Europe, including up to 1 week of training, €20000 excl. VAT.

Condition: good (used), Glass laminating system Type: Vacuum glass laminating system HVD-G02 Vacuum glass laminating system Glass laminating system, with 2 heating devices TOOL TEMP Model type TT-138B, S/N 310-1877-1, 310-1877-2 Laminating area approx. 2,900 x 1,400 mm, with feed table, stainless steel Control cabinet, area approx. 2,600 x 1,250 mm Control tower PC, 17" LCD monitor ACER Model/type AL711, mouse, keyboard The system consists of the following main components: Vacuum chamber (chamber + lid) Pneumatic lid drive Transport roller conveyor Lifting device Heating plates Chamber frame Vacuum technology (pumping station, valves, lines, feedthroughs, measuring technology, etc.) Pressure water temperature control device (2 piece) Transport pallet Lifting frame Control with control panel Technical data: Step-by-step pumping via valves adjustable up to 0.01 mbar; Heating / cooling: time adjustable via control Kjdjdkp D Hopfx Ab Toln Heating temperature directly adjustable on the pressurized water temperature control device (max. 140

Condition: good (used), Renz Punch 500 Perforator This device is in very good condition. New model with adjustable controls. Electric drive, foot pedal control. The set includes a 3:1 perforation tool, a 4x4mm hole, and a cutout for the hanger. Manufacturer’s description: Perforation device with a working width of up to 500 mm Device designed for continuous operation and heavy loads Foot pedal-operated operation Perforation of up to 40 sheets (4 mm) in a single cycle Quick and easy replacement of perforation strips Available with or without a suspension slot Available with QSA slots (quick format change by disabling selected needles without removing the slot) Klsdpfx Asx N I Ibsb Tsn Available with two-piece slots – one tool allows for perforation of both books without a suspension slot and calendars with a suspension slot (in this case, perforation without a suspension slot up to 465 mm) 3-phase powered Weight: 120 kg

Condition: excellent (used), Year of construction: 2007, Tool Tempo Kjdpfx Aomxkm Ajb Toln Type : TT 280 BJ CA 2007