Used Punching Rotor for sale (2,733)

Year of construction: 1994, condition: ready for operation (used), Working area: 3085x1650mm, max. punching force: 220kN, max. sheet thickness: 8mm, max. stroke rate: 750/min, max. workpiece weight: 230kg, max. punching diameter: 76mm, connected load: 19kVA, control: Bosch Trumagraph CC 20S, weight: 13.8t, operating hours: 84,400h, with storage interfaces for forward/backward storage, swing-back clamps, multitool control, air-suspended installation, chip conveyor with container, soft punch, thread forming and TrumaLift SheetMaster 1600 FMC, has been regularly serviced, on-site inspection is possible. Klsdpfxsq Ewi Ae Ab Tsn

Year of construction: 1972, condition: ready for operation (used), Format: 1000x700mm, an inspection is possible. Kljdpeqzkdqefx Ab Tsn

Year of construction: 1977, condition: ready for operation (used), Pressing force: 160kN, stroke speed: 200-1000/min, with automatic handling/ infeed and documentation. Klodpfx Abopgycbj Ten

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, ram adjustment: 150 mm, table length: 2,000 mm, table width: 1,200 mm, pressing force: 250 t, stroke adjustment: 40,200 mm, overall weight: 55,000 kg, DGUV certified until: 09/2026, Raster punching and forming line RSU 2500 - 2000 P Desch compact drive unit Electronic press force measuring system Hydraulic overload protection system Kledpsxcbbrsfx Ab Ten 3-piece tie rod cast construction Tool holder Table and slide clamping devices Raster VWA hydraulic roll feed, band width 500 mm, with Topochrom roll coating Slide area 1000 x 2000 mm Stroke rate: 20 - 150 spm Stroke adjustment: 40 - 200 mm Optionally with Kohler coil line 20030.400/9-2000 .2H

Condition: used, This Krause C64-50 Autofeed Die Cutter is a powerful machine designed for precise and efficient die cutting work. With a maximum format of 600 x 500 mm, it offers the flexibility to handle a wide range of materials. The machine is currently located in the Netherlands and is standing still, which represents an ideal opportunity for those looking for a high-quality die cutting machine. Format: 600 x 500 mm Equipment: Krause autofeed die cutter Kjdpfsvfx Ulex Ab Teln Max. Size: 60 x 50 cm (23 x 19 inch)

Condition: used, Year of construction: 1990, serial number 28043 weight 3 t pressure 30 t volt 380 V frequency 50 Hz Klsdpfspxri Hox Ab Ten

Condition: good (used), Year of construction: 1988, Ja Kljdpfjryaqyjx Ab Ten Stanzkraft 800 kN frequency 50 Hz current 17/11 A voltage 220/380 V round bar steel 32-17 mm square edge steel 30-18 mm 100 x 10 mm flat steel 350 x 16 mm throat 200 mm work height max. 1107 mm total power requirement 4 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1200 x 700 x 1850 mm

Condition: used, Year of construction: 1980, control panel Boschert Stanze Year 1990 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Kledpox U A H Nefx Ab Tsn Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: MR510726330, punching force: 30 t, total width: 4,840 mm, total length: 3,630 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, working range: 2,500 mm, overall weight: 7,500 kg, table width: 4,840 mm, table length: 2,800 mm, compressed air connection: 8 bar, stroke length: 2,500 mm, feed rate X-axis: 68 m/min, feed rate Y-axis: 68 m/min, feed rate Z-axis: 68 m/min, Equipment: safety light barrier, Euromac MTX Plus hybrid 1250 - Equipped with the latest control system and touch operation - Year of manufacture: 2015 Kedpeyhwv Iofx Ab Toln - Few operating hours, very good condition - 3 multitools with 8 stations each - Numerous punches included

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: 2 columns, with 4-digit code -Mounting: Bolt Ø 38 mm -Die stamp: see photos -Dimensions: 450/265/H305 mm Klodpfx Ashb N Ateb Tsn -Weight: 94 kg

Condition: used, SINGLE SHAFT SHREDDER WEIMA MODEL WLK15 MAIN MOTOR 90KW ROTOR KNIVES SIZE 50X50 (NEW KNIVES) ROTOR LENGTH 1500MM ROTOR DIAMETER 370MM THE MACHINE IS 100% FUNCTIONAL READY TO WORK Kjdpetqd Ndofx Ab Toln

Condition: good (used), Year of construction: 2021, operating hours: 14,000 h, functionality: fully functional, Professional finishing in the classic digital printing format: This is why we have developed the world's first flatbed die-cutter for the B3+ sheet format KAMA ProCut 58. The versatile professional die-cutting/embossing machine (580 x 400 mm) is extremely versatile. Punching, creasing, scoring, perforating and kiss-cutting labels, blind embossing and Braille as well as hot punching of plastic. Paper from 80 g/m² Cardboard max. 800 g/m² Plastic 80 - 800 g/m² (up to 1 mm) Sheet format max 580 x 400 mm Sheet size min 210 x 148 mm Klsdpovfpwwefx Ab Tsn Speed* 6,000 sheets/h Punching force 120 t (1.2 MN) Punching format max 570 x 380 mm Gripper edge 10 mm Dimensions (length x width) 2.6 x 1.75 m

Year of construction: 1995, condition: ready for operation (used), Immediately available at location: Boschert punching nibbling machine Type KST 40 / 750 PowerLine digital Year of manufacture 1995 Press force 40 tons Stroke height 40 mm Punch diameter max 105 mm Sheet thickness max 10 mm Extension tables left and right Quick-change system Digital backgauge system x-axis 0 – 1500 mm left Kedpoyg Eiisfx Ab Tsln y-axis 0 – 750 mm Tools Weight 3 tons At the price of Euro 2,000.-- plus VAT ex location.

Condition: excellent (used), rotating centre punch make Röhm MK 6 1 point 60 degrees Kedpfxogviq Nj Ab Toln 1 point 90 degrees total length 340 mm weight 8,5 kg

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Klsdpox U Eiaofx Ab Ton Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: used, Year of construction: 2007, SINGLE SHAFT SHREDDER WEIMA MODEL WLK15 MAIN MOTOR 90KW ROTOR KNIVES SIZE 50X50 (NEW KNIVES) ROTOR LENGTH 1500MM ROTOR DIAMETER 370MM THE MACHINE IS 100% FUNCTIONAL READY TO WORK Ksdpfxjtqdxfs Ab Tjln

Condition: excellent (used), Year of construction: 2006, Kaiser Press KSTU 500-30-75 RK Press force: 500 tons Stroke adjustment: 50-250 mm Ram adjustment: 200 mm Strokes per minute: 20-80 1/min Max. installation height: 700 mm Table area: 2,500 x 1,400 mm Ram area: 2,500 x 1,250 mm Feeder Andritz Kaiser Max. strip width: 800 mm Max. strip thickness: 5.0 mm Kljdpfx Abjyhh Nbs Tsn Straightening machine FECKER Max. strip width: 800 mm Max. strip thickness: 6.0 mm Decoiler FECKER Strip width: 800 mm Load capacity: 8,000 kg

Condition: excellent (used), Year of construction: 2001, Kaiser punching machine Type: KSTU 4000-25-6P Pressing force: 4,000 kN Table surface: 2,500 x 1,250 mm Pedal surface: 2,500 x 1,100 mm Installation height: 700 mm Pedal stroke: 40-250 mm Pedal adjustment: 200 mm Stroke rate: 20-100 1/min Kedpfxoyhh I Rs Ab Toln Machine overhaul in 2018 Space required: 4.8 x 3.2 x 5.5 m (LxWxH) Weight: 78,000 kg ARKU strip system Strip width 120 - 800 mm Strip thickness up to 6.0 mm ARKU decoiler Load capacity 8,000 kg

Condition: good (used), Year of construction: 1972, functionality: fully functional, pressing force: 25 t, space requirement height: 2,800 mm, space requirement length: 1,600 mm, space requirement width: 2,200 mm, Four-column punching press Manufacturer: Hermann Raster KG Type: HR SL4S Working area Distance from ram center or distance between the columns under the guide: 160 mm Smallest / largest distance from clamping table to ram at maximum stroke: 260 / 300 mm Kjdpfowcxccex Ab Teln Smallest / largest distance from clamping table to ram guide: 110 / 150 mm Clamping table Clamping area: 600 x 320 mm Clamping ram Smallest / largest stroke: 0 / 40 mm Ejector stroke (max. 20 mm) Stroke rate: 200-1000 per minute Straightening range: 70 mm Clamping area: 400 x 250 mm Clamping pin: Hole diameter: 40 mm; Depth 70 mm Safety device Electro-pneumatic clutch and spring-loaded brake Power Normal pressure 25,000 kp Cutting capacity 625 mm², K=40 kg/mm² Floor area required without soundproofing 1 m x 1 m x 2.45 m Weight without soundproofing 3,600 kg Floor area required with soundproofing 1.60 m x 2.20 m x 2.80 m Drive type Voltage 380-660 V Current type: Three-phase current Total power requirement 6 kW Drive: AEG, AM 132 MX4, power 7.5 kW, 2860 rpm Gearbox: PIV, FK NA HB 22 Control cabinet: AEG, 190300 Central lubrication: Woerner, PA 15.M1 Flat/V-belt 3, 17 x 2220, rubber material Drive: Variable speed drive Pull width: 65 mm Pull diameter: 224 mm Special features Gripper feed Z2 Useful width: 180 mm Soundproof cabinet sta Schalltechnische Anlagen GmbH The machine is connected to the power supply and can be tested.

Condition: ready for operation (used), Year of construction: 1997, Working area: 2500 x 1280 mm Klsdpfxsx Tr S Sj Ab Tjn Punching force: 220 kN For sheet thickness up to: 8 mm Weight approx.: 11 t

Condition: used, Year of construction: 1959, The Heidelberg OHT, manufactured in 1959, is a machine with an A4 format. It is currently in production and located in Germany. The delivery terms are FCA. Format: A4 Equipment: Letter Press Tiegel - DIE Cutter Punching force 40 tons Size min.: 40 x 70 mm Standard chase: 260 x 340mm Speed min.: 2.200 sph - max. 5.500 sph Kledpovfxwtjfx Ab Tsn

Condition: good (used), Punching machine, pneumatic punching machine, punching device, hole punching machine -Insert tool -for small stamping jobs -Control: pneumatic -Dimensions: 610/660/H1200 mm Ksdeb A I Twjpfx Ab Teln -Weight: 75 kg

Condition: refurbished (used), Year of construction: 2026, pressing force: 50 t, Custom-order machine High-speed punching press B500-950, completely overhauled. Table length: 950 mm, optionally also 1150 mm or 1250 mm. Adjustable stroke: 16 to 51 mm. Klodsw U A Dyjpfx Ab Tsn As an alternative to the Bruderer BBV 202/120 roller feed, a servo feed can be installed. Contact us for detailed quotations.

Condition: refurbished (used), Year of construction: 2026, pressing force: 25 t, Order machine High-speed punching press B250-740, completely overhauled Table length 740 mm, optionally also 850 mm, Adjustable stroke 13 to 38 mm, As an alternative to the Bruderer BBV 190/85 roller feeder, a servo feeder can also be installed. Contact us for detailed offers. Kledpow U A Ewefx Ab Tjn

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Punching plate Crosland CVK 980 Size 78 x 100 cm Year 2004 in very good working condition Kledjwif Huopfx Ab Ten available immediately