Used Pvc Extruder for sale (1,280)

Condition: reconditioned (used), Year of construction: 1997, operating hours: 216 h, functionality: fully functional, Equipment: documentation/manual, A reconditioned and functional profile line for rigid PVC-profiles (500 x 100 mm), consisting of: Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard powder Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx.30 rpm Screw torque: 10000 Nm Motor power: 3.8 - 23.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers PMA KS40 Accessories: Mass pressure sensor and mass temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Iajdpfx Asyhckajbrsn Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Total weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: recondition and checked for function Vacuum Calibration Unit Manufacturer: Blake Kunststoffproduktionsanlagen Type: 203-3-4,0 Year of manufacture: 1997 Serial number: 758 Total length: 5600 mm Vacuum pumps: 3 x 5.5 kW Longitudinal adjustment: electromotive Height/lateral adjustment: front and rear via threaded spindle and handwheel V2A tub: interior/exterior width: 450/700mm, length: 4500 mm Connected load: approx. 20 kW Total weight: approx. 3.000 kg Condition: recondition and checked for function Caterpillar Haul-Off Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Pads width: 300 mm Passage width: max. 500 mm Passage hight: 100 mm Effective contact length: 2400 mm Haul-off speed: max. approx. 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function Profile cross-section, max.: approx. 500 x 100 mm Note: The vacuum calibration unit, including caterpillar pull-off, can also be purchased separately.

Year of construction: 1994, operating hours: 32,303 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, second-hand Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of construction: 1994 Machine no.: 32061 Operating hours: 32,303 hours Screw geometry: conical for PVC-hard profiles Iaodpfx Aoyhcghobren Screw diameter: 63 - 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque from gearbox: 1000 daNm Dynamic load rating of the back pressure bearing: 103600 daN Motor power: 43.0 kW, Drive motor: Baumüller DC motor Barrel heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool heating zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible melt pressure: 500 bar Output: approx. 150 - 200 kg/h for rigid PVC profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Condition: The machine came directly from production and was cleaned by us, repainted (RAL 7035, light gray) and checked for function.

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Isdpfxsyhcc Aj Abrean Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 200 h, The system is located in the BIBUS Austria Democenter and can be inspected and tested at any time. The device can process a total of 14 materials - in addition to common plastics such as ABS, PLA, TPU and Carbon PA, high-performance polymers such as Ultem, Peek, CarbonPeek and Helios-Peek are also available. Four material-dryer are included in the delivery, Iasdpfx Aeibikwjbrsn Payment terms: Cash in advance, excluding transport and commissioning - these costs are charged depending on the location.

Year of construction: 1994, condition: used, weight 2,2 t extruder diameter x mm x +++++ Please note: Ijdpfox U A Iajx Abrsan The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Year of construction: 1999, BATTENFELD PE/PP PIPE HEAD PO 250 / 600 SI Type: PO 250/600 SI. Screen basket Year of manufacture: 1999 Little used Condition: Very good, needs cleaning With co-extruder Extrudex EN 25, year of manufacture 1999 For color strips The system is my property Location: Iaodovy It Tspfx Abron Sachal Extrusionsmaschinen Bahnhofstr 6 D-26345 Bockhorn-Grabstede

Year of construction: 2014, operating hours: 30,000 h, condition: used, functionality: fully functional, machine/vehicle number: 20526471, Laboratory Twin Screw Extruder – Coperion ZSK 26 Mc18 (40 L/D) with a 26 mm screw diameter Featuring all the characteristics of the ZSK Mc18 series, this extruder is ideal for formulation development and compound sampling, as well as for manufacturing small compound batches of up to approximately 180 kg/h. Compared to the previous model ZSK 26 Mc, the new laboratory extruder enables throughput increases of up to 100%, owing to the torque having been increased to 15 Nm/cm³. The extruder is mobile and space-saving as the control cabinet is integrated into the machine’s base frame. Heating and cooling systems are installed and operational (plug & play). Machine No.: 20526471 Year of manufacture: 2012 Operating hours: approx. 30,000 h Condition: Used, in operation Iajdpfx Ajyhd Dbjbron Technical specifications: Extruder type: Twin screw extruder Model: ZSK 26 Mc18 Process length: 40 L/D Drive power: 36.9 kW Power supply: 3 × 400 V (−10 % / +6 %), 50 Hz ±2 % Barrel configuration: E-0-0-S-0-0-1-0-V-0 Output: approx. 150–200 kg/h, depending on formulation, raw material, and required product quality Applications: Highly filled compounds, masterbatch applications Suitable for processing: LLDPE, LDPE, HDPE, PP, PPR, PS, ABS, PET, and biopolymers Scope of delivery Gravimetric feeding system: - K-Tron gravimetric feeders - 1 × pellet feeder - 1 × powder feeder (twin screw design) Side feeding / degassing: - 1 × side feeder ZS-B25 - 1 × vacuum side degassing unit ZS-EG25 Vacuum system: Busch vacuum pump Plastex MI 0120 B 222 CNX6, specifically designed for PET applications. Please note: Vacuum pump is not included. Process monitoring: - Melt pressure sensor system - Melt temperature sensor system - PLC integration Pelletizing system (strand pelletizing): - Air dryer unit not included - Strand pelletizer SP50 - Water bath Peripheral equipment: - Bag emptying station for pellets - Conveying system to the feeders Spare parts: - Spare parts included, second screw set.

Condition: used, Year of construction: 2006, Kahl Twin Screw Extruder is a machine manufactured by Kahl in 2006. Currently stored in Germany, it comes equipped with a fine grain hopper, fine grain discharge, fine grain sack, a belt unit (Type: BTK 1510-0), water addition, extruder, supply air blower, reconditioned in 2016. It also includes dust removal, tumbler sieve, dedusting, final packaging, belt dryer, product hopper, pipe chain conveyor, cyclone, rotary valve, distributor, dust sack, exhaust air blower, air stream rotation dryer, feed table, mixer, and an additional air supply blower and belt dryer. The delivery terms are FCA. Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 Iajdpfjvfxqyjx Abrsn refurbished 2016

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Make: Reifenhauser Model: Mirex-MT-V 1-RZE 120-1800 Ijdpfxovbcbuj Abrsan Year: 2016 Condition: Excellent Use: PET / PP / PS Foil or Sheet PET: Thickness Range: 0.25 - 2.2mm Output: 2,000 kg/h Max Sheet Width: 1600mm Extruder: RZE 120mm Electrical Supply: 3 x 480V 60Hz with N Calendar Roll Width: 1800mm Calendar Roll Diameters: 450 / 700 / 700mm Silicon Bath Max Sheet Width: 1600mm Silicon Bath Sheet Thickness Range: 0.15 - 1.5mm 4 Position Winder WOB 1800 for double web winding included. All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Year of construction: 2004, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 40EV.118, Twin-screw extruder model EBC 40HT/37D Screw diameter: 42mm Main motor power: 51kW L/D: 37 Center distance: 35mm The extruder consists of a machine base, reduction gearbox, and a distribution gearbox equipped with special bearings capable of ensuring perfect operation with a backpressure of up to 150 bar. Ijdpjyg Eghsfx Abrsan The barrel is a modular cylindrical type, with a length equivalent to 37 screw diameters, divided into eight sections. Temperature regulation of each barrel module is achieved by forced circulation of demineralized water through a series of horizontally drilled holes in each module. Heating is provided by cartridge heaters. The screws are made up of interchangeable segments and are mounted on splined shafts, allowing for the configuration best suited to the required processing. Barrels and screws are manufactured from highly wear-resistant steel. The degassing system consists of a 1.5kW liquid ring vacuum pump connected to the dedicated module by easy-to-clean piping; extracted gases are condensed in a special container for easy cleaning. The drive system features a (Siemens) 51kW AC motor with an inverter, enclosed in an electrical cabinet equipped with appropriate safety features and control signals. The control panel (integrated into the extruder) is divided into two sections: power, and temperature control. The cabinet is equipped with an air-conditioning unit. The extruder comes with a closed-loop water/water temperature control unit (1.1kW pump). Chiller not included.

Year of construction: 2026, condition: new, functionality: fully functional, YESOL 3500 CMS Industrial Cutting Plotter – AutoFeed CNC The YESOL 3500 CMS is an industrial cutting plotter developed by YS Solutions, based on extensive production experience in working with plastics and technical materials. The plotter is fully automated and equipped with a roll-feed mechanism compatible with standard industrial rolls, enabling uninterrupted production with no downtime. Applications • PVC, TPU • Technical and industrial fabrics • Membranes and coated materials • Eco-leather • Technical films and plastics Key Specifications • Working area: 3500 × 6000 mm • Cutting speed: up to 3 m/s • Cutting system: rotary knife (tungsten steel) • Table: conveyor with vacuum system • Feed: automatic, suitable for standard rolls • Positioning: laser-based Iedpfx Abjyg R Eversan • Control: CNC with nesting functionality • Power: 11 kW

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 3.04-00054, Equipment: type plate available, Used Bellaform extruder Type: BH45-30D Year of manufacture: 2013 With screw dimensions 45 mm - 30 l/d, screw speed approx. 160 rpm With 30 kW water-cooled servo motor, with gearbox Cylinder with 4 heating/cooling zones and water bushing in the feed area Material hopper plus a COLORTRONIC dosing screw for masterbatch A melt pressure sensor Control cabinet integrated into the machine frame, with factory-new PLC and Iasdouxa Abjpfx Abrsn With new touch panel for simple and intuitive operation This extruder has been functionally tested! Dimensions: approx. 195 x 70 x 200 cm (L x W x H with hopper)

Year of construction: 1990, condition: excellent (used), functionality: fully functional, Used Reifenhäuser extruder Iaodpfsw Np S Tjx Abrsn Type: RH 801-1-90-30 with one screw D = 90 mm - 30 L/D equipped with ceramic heaters and cooling air fans DC motor, power 103 kW Year of manufacture: 12/1990 Known plasticizing capacity: 250 kg with PP granulate The plasticizing capacity depends on the material and shape Fully functional

Year of construction: 2026, condition: new, We have designed our compact extruder model EX30-28d so that it can be used in all extrusion processes. Isdpfx Asby Rfpobrean We offer this extruder as co-extruder or laboratory extruder, as well as for the extrusion of welding wire, filament, solid rods, hoses, or for pelletizing with hot die or strand pelletizer. We also realize other machine dimensions, please contact us. Our standard extruder with nitrided screw and barrel covers most polymer raw materials. Optionally, we also offer this extruder with wear-resistant screw and barrel, for example: for PEEK, titanium, ceramics, etc.

Year of construction: 2026, condition: new, functionality: fully functional, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Inspect available machines at our factory in Königswinter. Iaodpfxjiv H Eke Abrjn We can also provide machines in other dimensions.

Condition: used, Inductive sensor, electronic sensor, sensor cable, connection cable, connection cable Ijdpfoir Nttox Abrean -Manufacturer: Leuze electronic, connection cable sensor cable Ovp -Type: KD M12A-4P-5m-PVC -Part No.: 50104544 -Number: 2x cables available -Price per piece -Dimensions packaging: Ø 200 x 30 mm -Weight: 0.2 kg/pc.

Condition: good (used), Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 8 mm -PVC coated -Length: approx. 50 m -other crane ropes are also available -Weight: 6 kg Iasdeghnanepfx Abrjn

Condition: good (used), Winch rope, crane rope, hoist rope, wire rope, clothesline, PVC wire rope -Wire rope: Steel rope PVC coated -Type: 6x7 FC PVC transp. -Rope nominal diameter 4.0 / 5.0 mm -Length: 102 m -Quantity: 2 pieces available Iajdpfx Aepy Ryqobren -Price: per piece -Weight: 6.6 kg/piece

Year of construction: 2008, operating hours: 75,559 h, condition: ready for operation (used), Main Drive Spindle motor power 200.2 kW Injection Unit Screw diameter 75 mm Additional Equipment Connection to Measuring System: Connection for connection to INDEX wall thickness measurement Equipment for tool zones: EURO socket CEE 32 A - 6 H / 250 V, 3-pole blue Central main power supply Main Drive Spindle motor power 200.2 kW Injection Unit Screw diameter 75 mm Additional Equipment Connection to Measuring System: Connection for connection to INDEX wall thickness measurement Equipment for tool zones: EURO socket CEE 32 A - 6 H / 250 V, 3-pole blue Central main power supply This Krauss Maffei KME 75-36 R AC single screw extruder was manufactured in 2008. It features a KM-GM 750 control integration with meter weight and mass throughput control, and a capacity of up to 750 kg/h granulate. The machine includes a connection for INDEX wall thickness measurement and is equipped with a EURO socket CEE 32 A - 6 H / 250 V. Contact us for more information about this machine. Application Types Iajdpjx D Rgyofx Abrjn Extrusion

Condition: used, We offer directly on behalf of the owner : Isdpex Nxfkofx Abrean Twin-screw extruder Make : COPERION ( Werner & Pfleiderer ) Gearbox make : P.I.V Type : ZSK 170 W 1920/1750 Year of construction : 2021 / 2002 / 1986 Screw diameter : 172 mm Screw speed : 4,9 - 49 min-1 Max. torque : 17,500 Nm Main engine : 216 kW In the last 3 years, a total of over €420,000 has been invested in new components and factory overhauls (some of which were previously unused) The extruder was in use until Aug / 2023 and has already been dismantled ready for transport. The components are partly redundant and date from the years 1986 - 2021. The scope of delivery consists of : Twin screw degassing Coperion DSE 180 - 1 x year of manufacture 2021 ( 180 t€ ) Main gearbox P.I.V - 1 x year of manufacture 2002, factory overhauled ( 233 t€ ) in 2021, unused - 1 x year of manufacture 1986, factory overhauled in 2016, used 2021 - 2023 Main engines Siemens, 212kW, 460V - 1 x 2002, factory overhauled ( 8 t€ ) in 2020, unused - 1 x year of manufacture 1986, factory overhauled in 2015, used 2020 - 2023 Barrels - 16 various, new + used, with + without openings Screw shafts - 2 x approx. 4,600 mm Miscellaneous : - Supports - screw tips Sold without electrical and control devices and without screw segments. Further technical data and details on request or see data sheets in photos / PDF

Year of construction: 1983, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1983 and is in fine condition. - Brand: Hans Weber GmbH Iaodoq Tr Tbspfx Abren - Model: ZE 30 - Year built: 1983 - Single-screw extruder - Screw Ø: 30 mm - Ratio: 20 L/D

Year of construction: 1998, operating hours: 64,082 h, condition: good (used), This Cincinnati extruder is in machine storage at Plastima Used Machinery. The machine is from 1999. Special note: the extruder lacks the gearbox. – Brand: Cincinnati – Model: Titan 45R-APC – Construction year: 1998 – Conical double screw extruder – Screw Ø: 45 mm – Working hours: 64.082 Isdpfx Aoq Tr T Rebroan

Year of construction: 1993, operating hours: 104,599 h, condition: good (used), Brand Cincinnati Milacron Austria GmbH Type CMT 35 Machine number 2005723/10 Type Screw Conical Double Screw Year of manufacturing 1993 Machine hours 104,599 hours Screw Diameter 35mm Dimensions (LxWxH) 3200 x 1500 x 1720 mm Weight (approx) 2000kg Iedpfx Asvl Hzgsbrean

Year of construction: 2008, condition: good (used), This extruder line from Kuhne is in machine storage at Plastima Used Machinery. The machine comes from 2008 and is in great condition. Brand: Kuhne GmbH Iodpfx Aju Etygjbroan Model: K 60E - 33D Type Screw: single screw Year of construction: 2008 Screw diameter Ø: 600mm L/D ratio: 33 cylinder height: 425 mm Cone height: 325 mm Total height: 750 mm

Condition: excellent (used), Year of construction: 2013, screw diameter: 38 mm, This machine is in storage at Plastima Used Machinery Iasdpevcqccofx Abrsn