Used Qt for sale (74)

Condition: good (used), Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller -Manufacturer: single, temperature controller Digitemp Q -Type: TQD 3110 D -Measuring range: 0 to 399 °C -Dimensions box: 220/130/H135 mm Nodpfjudqbisx Acnocu -Weight: 0.8 kg

Year of construction: 1994, condition: used, hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bucher, hydraulic unit from press brake HACO type PPES 30135 -Hydraulic pump: type QT43-020R Ncsdpfx Aorc Ilkscnou -Engine: EMI 14.9 kW / 1460 rpm -Individual components: see photos -Dimensions: 970/420/H370 mm -Weight: 185 kg

Condition: used, Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump Ncjdec Rwctopfx Acnju -Hydraulic unit with: 2x motors and oil cooler -2x hydraulic pumps: from Truninger type QT23-005/22-005 -per pump max. Pressure: 320 bar -per pump max. Liter output: 7.9 l/min (5 cm³/U) -1x drive: 11 kW 1460 rpm -1x drive: 5.5 kW 1460 rpm -Hydraulic filter -Hydraulic tank -Oil cooler with: fan -Dimensions: 1500/1100/H1900 mm -Weight: 845 kg

Condition: used, HPLC Waters The system consists of these modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters Pal System HPLC Waters Leap Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow control modules Flow rate from 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary solvent manager Flow rates from 0.10 to 5.00 µl/min. Nedpfx Acsvcnpaenjcu Flow control module Flow rate from 0.20 to 5.00 µl/min Sample manager The sample manager injects the samples it takes from microplates or vials into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard rinse, or it can do so in less than 60 seconds, including a double standard flush. The sample manager accepts standard impression plates, 5.03 $0.02 in. x 3.365 $0.02 in, SBS/ANSI compliant plates (maximum height of 2.2 inches, including covers). The sample manager can test samples at any temperature between 4 and 40 °C (39 and 104 °F) at ambient conditions of 25 °C (77 °F) or less. Heating and trapping module Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient to 65 °C (149 °F). The column base can be swiveled outwards to any position between 0° and 180°. In the 0° "Home" position, the column base is located directly above the sample manager and can be connected to an optional optical detector. In the 180° "away" position, the analytical column can be connected to a mass spectrometer (on the right-hand side of the system). The Synapt G2 is a Q-TOF based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used as a peptide identification only (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Instruction manual Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 158015, turning length: 550 mm, turning diameter: 300 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 190 mm, travel distance Y-axis: 575 mm, TECHNICAL DETAILS Turning Diameter: max. 300 mm Turning Length: max. approx. 550 mm Standard Turning Diameter: 276 mm Swing Diameter: max. 525 mm Distance Spindle Nose – Turret Face: 115 – 690 mm Travel X-Axis: 190 mm Z-Axis: 575 mm Counter Spindle Travel B: 585 mm C-Axis: 360° Main Spindle Speed Range: 35 – 4,000 rpm Drive Power: 22 kW Max. Torque: 351 Nm Spindle Nose: A2-6" Spindle Bore: 76 mm Max. Bar Capacity: 64 mm Chuck Diameter: max. 250 mm Counter Spindle Speed Range: 35 – 4,000 rpm Drive Power: 7.5 kW Max. Torque: 57 Nm Chuck Diameter: max. 150 mm Tool Turret Number of Tool Positions: 12 Tool Holder: VDI 40 Shank Diameter: 25 mm Drill Shank Diameter: 40 mm Turret Indexing Time: 0.2 / 0.6 s Ncodpfsxb Aizsx Acnsu Driven Tools Speed Range: 25 – 4,500 rpm Drive Power: 3.7 kW Max. Torque: 35 Nm Feeds Rapid Traverse X/Z: 30 m/min Rapid Traverse C: 400 rpm Rapid Traverse B: 18 m/min Feed Range X/Z: 0 – 5,000 mm/min Feed Range C: 1 – 2,000 °/min MACHINE DETAILS Control: PC Fusion CNC 640 T Space Requirements & Weight Footprint: approx. 5.0 x 3.0 x 2.5 m Machine Weight: approx. 5.9 t Total Power Requirement: 34 kVA EQUIPMENT Documentation Chip Conveyor Coolant System Three-jaw Chucks 250 / 150 mm Tool Measuring Arm Driven Tool Attachment Extraction System 5x Fixed Tool Holders 2x Driven Tool Holders

Condition: excellent (used), Year of construction: 1999, CNC Lathe MAZAK SQT 200 MS Year of manufacture: 1999 Including indicated tools and sub-spindle Control: Mazatrol PC Fusion CNC 640T Technical specifications: Max. swing diameter: 525 mm Max. swing diameter over saddle: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° - 360°/0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions/5° Tool turret: Number of tool stations: 12 (freely configurable with stationary and driven tools) Turret indexing time – 1st station: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Travel: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Rapid traverse: Ncodox Hgl Hepfx Acnou X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Feed range: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000°/min

Condition: excellent (used), Year of construction: 2000, CNC Lathe MAZAK SUPER QUICK TURN 200 Year of manufacture: 2000 Working area: Max. swing diameter: 525 mm Max. turning diameter: 350 mm Max. turning length: 514 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 5,000 rpm Main drive power: 18.5 kW Constant torque: 333 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Turret: Standard version: 12 stations Travel: Turret travel: X-axis: 190 mm Z-axis: 535 mm Nodpfx Acjxvb E Denocu

Condition: used, Year of construction: 1996, turning diameter . mm turning length . mm control Mazatrol type . . turning speeds . U/min spindle passage . mm Tool changer . Pos. Spindle capacity . KW centre distance . mm x-travel . mm z-travel . mm weight of the machine ca. 4,75 t Super Quick Turn The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Ncedpoyqr S Sofx Acnou We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2003, Turning length 1000 mm Spindle bore 65 mm Nedpex N A I Nefx Acnocu Max. turning dia. 300 mm Spindle speeds 4000 rpm Spindle speeds on live tools 4000 rpm Turret w/12 stations Control: Mazatrol 640 T Nexus Equipped with: 3 pcs. live tools Various tool holders

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, BESANA SQ 10 L glass double edging line for max. glass sizes : 1300 x 1600 mm Ncjdpfx Aowg Ariocnou

Condition: like new (used), Year of construction: 2023, operating hours: 2,763 h, functionality: fully functional, machine/vehicle number: 346574, turning length: 500 mm, turning diameter: 276 mm, spindle speed (max.): 4,000 rpm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 33 m/min, bar diameter (max.): 80 mm, Equipment: rotational speed infinitely variable, The machine was commissioned in February 2024 and has 1,778 automatic hours. It has only been used for machining plastics and brass. The subspindle is equipped with a two-jaw chuck for holding workpieces for milling contours. The machine can be inspected under production conditions at any time. It is in like-new condition. Total investment including accessories: €241,000. Equipped with a 12-station turret, all driven. Sale EXW 91413 Neustadt, Germany. Ncsdpfx Acoynnhwjneu

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1270, overall weight: 280 kg, table length: 457 mm, table width: 660 mm, Electro-Discharge Drilling Machine (Disintegrator) ELECTRO ARC 2-DBQT FOR SPARK ERODING BROKEN DRILLS AND TAPS Ideal for quickly and cleanly removing broken taps, drills, studs, and screws with precision, while leaving the surrounding material intact. - Year of manufacture: 1999 - For taps M1.6 to M38 - For drills Ø1 to Ø38 - 1x collet Ø4 mm - 1x collet Ø4.5 mm - 1x collet Ø5 mm - 2x collets Ø6 mm - 380 V - 10 kVA - 15 A - 50 Hz - Serial No.: 1270 Nodpfxoymw Spe Acnjcu Free loaded onto truck

Condition: used, Year of construction: 2005, Mazak QTN 200 lathe, year of manufacture 2005 Mazatrol 640T 210 mm Kitagawa BB 208 chuck Spindle bore 65 mm Turning length 500 mm Turning diameter 380 mm Tailstock Nodpfxjxgpqpo Acnocu Tool probe

Condition: used, Year of construction: 1998, Mazak SQT30M CNC Lathe, year 1998, Japan C-axis, driven tools Mazatrol T plus Turning length: 1000mm 12-inch chuck Spindle bore: 98mm Ncjdpfx Acoxutcfenou VDI50 turret Tailstock Probe Chip conveyor

Condition: excellent (used), Year of construction: 2011, operating hours: 5,040 h, functionality: fully functional, turning length: 1,250 mm, turning diameter over cross slide: 420 mm, turning diameter: 420 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 80 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 33 m/min, rapid traverse Z-axis: 33 m/min, bar diameter (max.): 80 mm, MAZAK QUICK TURN 300 Smart Ncedpfx Acowzkvfensu Operating Hours: Automatic Operation: 5,040 hours Condition: Very good condition, regularly serviced and meticulously maintained! Capacity & Working Area Max. swing diameter: Ø 720 mm Max. turning diameter: Ø 420 mm Max. bar stock diameter: Ø 80 mm Max. machining length: 1,200 mm Main Spindle Max. spindle speed: 4,000 rpm Spindle nose: JIS A2-8 Rated power (40% duty cycle): 26 kW Max. torque: 750 Nm Turret Number of tool stations: 12 Tool cross-section: 25 mm (external), 50 mm (internal) Feed Axes Rapid traverse (X / Z): 30 / 33 m/min Travel (X / Z): 240 mm / 1,314 mm Tailstock Taper: MK NC axis, pressure controlled via M-codes Max. axial pressure: 10,000 N Dimensions & Weight Machine dimensions (L x W x H): 3,770 x 1,810 x 1,900 mm Weight: 7,100 kg (without chip conveyor and coolant) Chuck: Kitagawa BB210 with through-hole Chip Management Mayfran hinged belt chip conveyor Coolant pump 8 bar & chip flush General Specifications: SD MEMORY I/F (1P) + USB MEMORY I/F (1P) Mazak standard colour NC controlled tailstock Tailstock pressure adjustment Tailstock with fixed quill (650U/1250U) Operator door with safety interlock switch Double foot switch Fully enclosed work area Work area lighting Safety devices according to global standards Complete coolant system Chuck status notification Automatic tool setter (Tool Eye) 10.4" colour display EIA/ISO package LAN interface

Condition: used, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Mazak turning center Nodpfx Aszd Scvocnocu Type QT-28N-U CNC Mazatrol T32-2

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 43954, Vacuum: 20 mbar Njdpfx Ajyqyftjcnecu Motor Oil: Type SAE 30 Qt.: 6 Ltr.

Condition: good (used), Year of construction: 2014, Overall dimensions: 12.4 x 18.8 m incl. safety fencing Number of baskets per oven: 2x 1,170 x 1,150 x 2,000 mm Reference load weight (net/gross): 1,285 / 2,185 kg Max. load weight (net/gross): 2,000 / 2,700 kg Load: 2,050 x 1,150 x 2,800 mm, external dimensions: 2,950 x 6,400 x 7,800 mm Max. temperature: 600 °C Operating temperature: 510 °C Total heating capacity: 2 x 81 kW = 162 kW electric Quenching water bath: Type = QT-24.16.57/71E Temperature bath max.: 70°C, chamfering volume = 20 m^3 2 ageing furnaces: Type = ADBF-24.16.30/250E Ncsdpfx Acjy H Ih Ajnsu External dimensions: 2,800 x 4,850 x 4,000 mm Oven temperature max.: 250°C Operating temperature: 180 °C Total output: 2x 40.5 kW = 81 kW Electrical storage/retrieval section, Gea cooling coil, protective housing, safety equipment, system control 1,056 annealing baskets with stanchion pallets System already dismantled, packed and stored

Condition: used, MAZAK QT 20 Model: OT-20-N-K Turret: 8 positions Motor: 18.5 kW Year: 1988 Ncedpfx Aswulzvjcneu Weight: 11,700 lbs Chuck: diameter 250 renewed operational panel

Condition: ready for operation (used), Busch vacuum pump center with control box Busch type: 251-512, 023. 0.5 bar Qt. 6 liters Busch type: CB 0220 D / P 0.5/5 Ncjdpfx Asvx Avgocnju Pumps are tested. Siemens control TD 200 Control not tested Pumps are tested and working.

Condition: good (used), 2 Bakery Mixers Nodsiqg Uuopfx Acnocu Sigmar - 60 QT, year 2011 complete with stainless steel bowl and attachments and stainless bowl carrier Peerless Bakery Mixer - 80 QT, complete with stainless steel bowl and attachments

Condition: good (used), Oil Diffusion Pump Manufacturer: Leybold Type: DIP 50.000 Condition: used Technical Data Product: DIP 50000 Catalog No.: 22240 Suction side connection flange: DN 1000 ISO-F Discharge side connection flange: DN 160 ISO-K Suction capacity for air below 1.0 x 10-4 mbar / 7.5 x 10-5 Torr: 50000 l/s Operating range: 1.0 x 10-2 - 5.0 x 10-7 mbar / 7.5 x 10-3 - 3.8 x 10-7 Torr Ultimate total pressure: < 5.0 x 10-7 mbar / < 3.8 x 10-7 Torr Max. permissible pre-vacuum pressure: 6.0 x 10-2 mbar / 4.5 x 10-2 Torr Operating fluid: Pump is supplied without operating fluid Operating fluid quantity min.: 12.0 l / 12.7 qt max.: 25.0 l / 26.4 qt Power connection: 3-phase Y, 400 V, 50/60 Hz Heating power: 24 kW Number of heating elements: 24 Warm-up time: < 30 min Number of cooling water circuits: 3 Cooling water flow rate (minimum) Pump: 1500 l/h / 6.6 gal/min Nozzle cap steam trap: 150 l/h / 0.66 gal/min Nododnv A Uepfx Acnscu Max. cooling water pressure: 6 bar / 87 psi Cooling water connection Pump: 1/2", internal thread Nozzle cap steam trap: 3/8", internal thread Dimensions: see dimensional drawing Weight: 560 kg / 1235 lbs

Condition: like new (used), functionality: fully functional, mileage: 46,848 km, power: 367.75 kW (500.00 HP), first registration: 08/2024, fuel type: diesel, empty load weight: 9,000 kg, maximum load weight: 19,000 kg, overall weight: 19,000 kg, tire size: 315/70, axle configuration: 4x2, wheelbase: 3,750 mm, next inspection (TÜV): 08/2025, fuel: diesel, brakes: engine braking, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2023, operation weight: 9,000 kg, Equipment: ABS, additional headlights, air conditioning, airbag, navigation system, onboard computer, QT-011 - 3+2 year warranty from first registration date STANDARD EQUIPMENT: Air-suspended cab ▪ Automatic air conditioning ▪ Sleeper zone remote control ▪ Black grille ▪ Exterior mirror covers in body colour ▪ Front bumper in body colour ▪ Engine hood in body colour ▪ Cruise control & speed limiter ▪ Driver‘s seat – heated & air-suspended ▪ Dry air cab heating ▪ EBS (electronic braking system) ▪ Electrically heated and adjustable mirrors ▪ Electrically operated sunroof ▪ Front & rear underrun protection ▪ Extended front bumper ▪ Switchable air compressor ▪ DAB radio ▪ Lane Departure Warning ▪ Rain sensor (automatic dipped beam & windscreen wipers) Ncedpfx Ajw A Nigjcnju OPTIONAL EQUIPMENT: Comfort Pack: Automatic Cruise Control & Predictive Cruise Control, Refrigerator, Passenger seat armrests, Electric cab tilting, Navigation ▪ Parking air conditioning ▪ Exterior sun visor ▪ 1100mm fifth wheel coupling ▪ 2.47 FDR

Condition: used, Plasma-nitriding furnace, make Ipsen type: VVPH useable dimensions: ø800 x 1200 (H) mm charge weight: 600 kg gross heating power: 100 kW working temperature: 150 – 600°C PLC: Siemens S5 plasma generator: MAG-Puls QT 800/50/150-UP Ncedpfx Acjxc D E Honsu plasma generator: MAG-Puls was newly acquired in 2008