Used Quill Stroke for sale (7,982)

Condition: refurbished (used), functionality: fully functional, overall weight: 1,500 kg, 250L Spiral mixer 400V 32A Refurbished 2 speed spiral mixing arm and 2 speed bowl Can be operated manually or automatically Automatic with time control. First speed automatically adjustable via time relay minutes and second mixing time so second speed can be set automatically via time relay. Boiler is lifted hydraulically via hydraulic pump. Emptying product via chute. Electric mostly new Rsdpfx Aofq R N Ssbmobt Machine has had major inspection maintenance general overhaul. Top condition Product slides over product chute Suitable for dough bakery or minced meat kebab mixing

Condition: refurbished (used), Year of construction: 1988, CARLO SALVI 873/SV revised to NEW Diam. 9 mm max Length 100 mm max Length Cut 125 mm max PPM 250 Available at Calolziocorte (LC) - ITALY Delivery time: 8 weeks Redpfx Absittf Ssmobt Revision made by HBR srl with: - New electrical system according to CE standards with inverter and PLC - New Lubrication System - New engine with disc, pulley and brake - New thread take-up roller pump - New belts - Rectification of all parts of the Central - Pins, Bushings and Nuts replacement - New bearings

Condition: good (used), KLOPP H1000 - Planing Machine Rbjdpfjxzd Ryjx Abmst - Max. planing length: 1000 mm - Planing width: 750 mm - Automatic feed - Worktable extension Dimensions: LxWxH 3.4 x 1.5 x 1.7 meters / Weight approx. 3800 kg Subject to errors and omissions.

Condition: used, Electro Dual Screwdriving Unit with Automatic Feed and Pneumatic Double Stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriving unit is equipped with a pneumatic double stroke, operated via Festo valves and cylinders. Additionally, various monitoring systems are installed for full automation. Technical data: Torque of electric screwdriver: 0.6 Nm Gearbox torque: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Total pneumatic stroke: 100 mm Spring stroke for screwdriver: 20 mm Distance between both screwdriving tools: 73 mm - Equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - Requires Bosch Rexroth LT303 power module for operation (power module not included) Screwdrivers 1 and 2 are each composed of the following components: Rexroth type servo motor Rexroth type 0 planetary gearbox Rexroth type 0 encoder Rexroth type 0 straight drive output Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Rbjdpfx Ashxvu Eebmst Gearbox unit Rexroth Type: 3GE27 SZ3 Material no.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material no.: 0 Nominal torque: 12 Nm Reduction ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive output Rexroth Type: 2GA82 SZ2 1/4" SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction ratio: 1 Weight: 0.2 kg Installation length: 90 mm One 7 m motor connection cable is included in the delivery. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg Good condition

Condition: used, Electric dual screwdriver unit with automatic feed and pneumatic double stroke, mounted on handling device, handling system, manipulator for screwdriving technology. Screwdriving Unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are installed to enable full automation. Screwdriver 1 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 straight drive head Screwdriver 2 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox Redpfx Aofx Hyfebmobt - Rexroth type 0 encoder - Rexroth type 0 offset drive head Dimensions (WxHxD): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring travel: 20 mm Last screws used: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current draw: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Reduction ratio: i=18.9 Max. torque: 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Reduction: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive head Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.2 kg Installation length: 90 mm Offset drive head Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach (swung out): max. 860 mm Swivel radius at full extension: max. 360° Guide column vertical: Ø 30 mm Guide columns horizontal: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for limiting swivel radius Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as base plate Blue steel base plate is not included in the scope of delivery.

Condition: excellent (used), Year of construction: 2000, Type of machine HFE220-3L WILA TOOLING SYSTEM WITH FUL L LENGTH HYDRAULIC CLAMPING LARGE AMOUNT OF WILA TOOLING Rbsdpfx Aev Rw Risbmot Maximum press force 2200 Minimum usable press force 260 Beam length 3220 Distance between frames 2700 Throat depth 420 Stroke length 350 Open height 620 Minimal increment 0.01 Positioning accuracy of the beam 0.01 Beam width 180 Table height 960 Approach speed without protection 10 Approach speed with protection 100 Maximum bending speed 10 Return speed 100 Motor power 18.5 Mains rating 20 Mains voltage 400 Mains frequency 50 Hydraulic oil capacity 295 Maximum hydraulic pressure 300 Length overall +/- 10 mm 4360 Depth overall +/- 10 mm 2660 Height overall +/- 10 mm 3200 Weight approximate 15350

Condition: used, No. 3239 Stroke sander Johannsen T 82 K / PNEUMA Used Table size 2800 x 950 mm Belt dimensions 7800 x 150 mm Pneumatically controlled sanding pad Sanding width with one transverse table movement 1000 mm Working length 2700 mm Offset right 850 / 220 mm Passage under belt 375 mm Table height adjustment by handwheel Drive motor 5.5 kW Fan motor 2.2 kW Compressed air connection 6 bar Weight approx. 900 kg Sale on behalf of the customer, ex location near 69124 Heidelberg, without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Rbsdpfxjw Id Uye Abmst Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: good (used), Technical data: Manufacturer; Interroll Condition: Good ( Used ) Max. load: 50 Kg Belt speed: 1,0 m/s Lifting time: 0,3s Rated voltage: 24V/48V Drive motor and lifting motor Control: Multi Control 6 pieces in stock Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We will be happy to provide you with an individual offer or advise you on design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as: Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully implemented projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers. Redpfx Aefd Hapobmebt

Condition: good (used), Technical data: Manufacturer; Interroll Condition: Good ( Used ) Max. load: 50 Kg Belt speed: 1,0 m/s Lifting time: 0,3s Rated voltage: 24V/48V Drive motor and lifting motor Control: Multi Control 2 pieces in stock Rbjdofd E U Uepfx Abmjt Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We will be happy to provide you with an individual offer or advise you on design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as: Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully implemented projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Condition: new, Year of construction: 2025, total height: 5,150 mm, ram adjustment: 200 mm, installation height: 750 mm, table height: 1,117 mm, total width: 2,600 mm, total length: 4,000 mm, table length: 2,500 mm, table width: 1,300 mm, conveyor belt width: 430 mm, pressing force: 315 t, stroke length: 300 mm, distance between side stands: 850 mm, distance between stands: 2,580 mm, overall weight: 54,000 kg, control voltage: 24 V, Standardized 315-ton automatic punching press with fixed stroke at an attractive price. Cost-optimized basic configuration without enclosures or safety gates for use in a soundproof booth. Optional accessories such as safety gates/enclosures, press force measurement, tool change/clamping system, etc. are available. Rbodpfx Aewc A Ebjbmet For technical specifications, see PDF document. Delivery time: 6 months

Condition: new, Year of construction: 2025, total height: 3,700 mm, ram adjustment: 150 mm, installation height: 650 mm, table height: 854 mm, total width: 2,479 mm, total length: 4,186 mm, table length: 2,000 mm, table width: 1,200 mm, conveyor belt width: 350 mm, pressing force: 250 t, stroke length: 250 mm, distance between side stands: 920 mm, distance between stands: 2,040 mm, overall weight: 31,000 kg, control voltage: 24 V, Standardized 250-ton automatic punching press with fixed stroke at an attractive price. Cost-optimized basic configuration without enclosures or safety gates for use in a soundproof booth. Optional accessories such as safety gates/enclosures, press force measurement, tool change/clamping system, etc. are available. For technical specifications and available accessories, see PDF documents. Rsdpfx Abswb Dh Iomsbt Delivery time: 6 months

Condition: refurbished (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 28727, DOUBLE-STROKE HEADER NATIONAL 61MS operational Machinery operational, fully functional. Revised in 2024 (mechanical and electrical parts) Available for any test c/o HBR srl Number of die: 1 Rbsdpfx Abet Rp A Homjt Number of punches: 2 Pieces per min.: 400 Cutoff diameter: 6 mm. Cutoff length (min./max.): 10/52 mm. Kickout stroke-die (min./max.): 4.8/30 mm. Kickout stroke-punch (max.): 9.5 mm. Upset diameter: 14 mm. Quill diameter: 19 mm. Cutter insert diameter: 12 mm. Die diameter: 41 mm. Cone punch diameter: 32 mm. Finish punch diameter: 35 mm. Power of main motor: 15 KW Floor space (width): 1.340 mm. Floor space (length): 2.680 mm. Height: 1970 mm. Net weight: 4.700 kg. Gross weight: 5.400 kg.

Condition: used, Grinding quills: 16 - 40 mm Redpfxediuire Abmjbt

Condition: ready for operation (used), Year of construction: 2002, operating hours: 19,300 h, functionality: fully functional, turning length: 750 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 750 mm, swing diameter over bed slide: 320 mm, TECHNICAL DETAILS Rbodpfx Aeycuvkjbmst Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Turning length: 750 mm Travel X-axis: 185 mm Travel Z-axis: 750 mm Bar capacity: 52 mm Spindle speeds: 4,000 rpm Spindle nose: 55027/A6 DIN Spindle drive: 9 kW Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 8 m/min Tailstock quill diameter: 70 mm Tailstock quill stroke: 120 mm Tailstock taper: MT 5 MACHINE DETAILS Control: Heidenhain Manuel Plus Dimensions & Weight Machine dimensions: 2,450 x 1,668 x 1,825 mm Machine weight: approx. 2.0 t Operating hours: approx. 19,300 h EQUIPMENT 3-jaw chuck Tailstock Multifix size B Documentation

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input Rbedpsyf Eigjfx Abmjt - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: excellent (used), Year of construction: 1998, travel distance X-axis: 290 mm, travel distance Z-axis: 1,920 mm, spindle motor power: 11,000 W, 3 chuck ca 400 mm Duplomatic 8 position revolver Steady rest big 400 mm Steady rets normal 300 mm Pinole taper: 6Mk Stroke pinole: 180mm Quill Ø: 95mm Length: 3300mm Width: 1800mm Height: 1700mm Weight: 4000kg Rbsdpfx Abeyfd Hwomjt Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1990, Make: Kunzmann Type: WF5/3 Year of construction: 1990 X - axis: 500 mm Y - axis: 360 mm Z - axis: 420 mm Clamping surface: 700 x 350 mm tool holder: SK40 spindle bore: 22 mm quill stroke: 60 mm Dimensions: approx. W 1.50 x D 2.40 x H 1.90 m Redpfoffyfrex Abmebt Weight: approx. 1.6 t All information without guarantee. The machine is in a very good condition. A demonstration is possible at any time in our exhibition hall.

Condition: used, Year of construction: 1994, turning diameter 570 mm turning length 2000 mm control Sinumerik 805 Siemens swing diameter over face slide 365 mm main spindle speeds: 3-2.500 U/min drive of main spindle 15/19 kW spindle bore 62 mm spindle head DIN 55027 No.8 Rodpfx Aju Sbkgjbmsbt tailstock taper MT 5 quill stroke 190 mm pinole diameter 80 mm feed range - long. and cross 0,01-50 mm/u total power requirement 50 KVA weight of the machine ca. 5 t dimensions of the machine ca. m

Condition: used, Year of construction: 2001, x-travel 400 mm y-travel 320 mm z-travel 450 mm Control Haidenhain TNC 124 drive of main spindle 3 kW number of spindle speeds 63-3150 u/min tool taper SK 40 Rsdpfxexndahe Abmebt stroke of quill vertical 60 mm feed speeds 5-2000 mm/min rapid traverse 2 m/min work table: 800x320 mm coolant 20 l/min total power requirement 5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,2x2,4x1,6 m

Condition: excellent (used), - Digital 3-axis position display. - Accessories included. Working Range Centre distance: 1000 mm Centre height: 200 mm Swing diameter over bed: 400 mm Swing diameter over cross slide: 250 mm Distance from top slide to turning centre: 40 mm Bed width: 260 mm Longitudinal slide travel: 900 mm Cross slide travel: 220 mm Top slide travel: 110 mm Bed carriage guide length: 380 mm Turning tool cross-section: 20 x 20 mm Rodpfxjw U Ac Ne Abmsbt Spindle Spindle nose according to DIN 55 029 (Camlock): 5" Spindle bore: Ø 50 mm Internal taper according to 7178: 1:22 Max. faceplate diameter: Ø 260 mm Max. chuck diameter: Ø 200 mm Spindle speeds: 40 – 3000 rpm Speed control: stepless Mechanical speed ranges: 4 Drive Motor Three-phase AC motor with integrated brake Infinitely variable speed (frequency inverter) Power at 40% duty cycle: 5.3 kW Max. nominal torque at main spindle: 640 Nm Tailstock Quill diameter: Ø 50 mm Quill stroke: 120 mm Quill internal taper: MT 3 Machine Dimensions Overall length: 1950 mm Overall height: 1635 mm Overall width: 1060 mm Spindle height above floor: 1133 mm Total machine weight: 865 kg

Condition: excellent (used), Year of construction: 2005, Heidenhain digital display Fehlmann cross table KS 322 D Working area: Z-axis quill stroke 110 mm Machine head travel 450 mm Table spindle nose 0 – 527 mm Rodpfxswkrp Eo Abmsbt SF 32 quick-change system Work spindle 2.9 kW Speed range continuously adjustable 50 – 6300 rpm Clamping surface 320 x 670 mm Dimensions and weight: Space required W x D x H 1.5 m x 1.35 m x 2.1 m Weight approx. 850 kg

Condition: excellent (used), Heidenhain digital readout. Fehlmann cross table: KS 255. Accessories: available. Working range: Quill stroke Z-axis 110 mm Machine head travel 450 mm Table spindle nose 0 - 527 mm Quick-change systems SF 32 Work spindle 2.9 kW Speed range infinitely variable 50 - 6300 rpm Clamping surface 255 x 550 mm Dimensions and weight: Space requirement W x D x H 1.5 m x 1.35 m x 2.1 m Weight approx. 850 kg Rbodpfx Asw Hqdmobmot

Year of construction: 2001, condition: excellent (used), Digital display Heidenhain. Slide travel range Slide travel longitudinal (X) 450 mm Carriage travel transverse (Y) 300 mm Slide travel vertical (Z) 350 mm clamping surfaces 800 x 400 mm Tool holder SK 40 quill stroke 100 mm Swiveling vertical milling head ± 90 Speed range 50-2500 rpm Rjdpfx Ajnab A Nsbmobt Machine dimensions: Length 1485 mm width 1475 mm height 1475 mm Weight approx. 1500 kg

Condition: excellent (used), Control : Heidenhain TNC 426 Dimensions Space requirement (WxDxH) 1.92x1.85x2.4 m Weight Weight approx. 2'400 kg Working range travel lengthwise X-axis 500 mm Transverse travel Y-axis 255 mm Quill stroke (controlled) Z-axis 147 mm Quill stroke (manual) Z-axis 160 mm Machine head travel W-axis 500 mm Feed rates Speeds: Rapid traverse - X- and Y-axis 1-11,000 mm/min - Z-axis 1-6,000 mm/min - W-axis 1-3,600 mm/min Feed forces - X- and Y-axis 6'500 N - Z-axis 8'000 N Rapid traverse - X- and Y-axis 11 mm/min - Z-axis 6 mm/min Displacement measuring system Direct measuring system via linear scale X / Y / Z axis Resolution Indirect measuring system via rotary encoder Z axis Resolution in X-, Y-, Z- and W-axis 0.001 mm Accuracy of position tolerance P axis(es) X / Y 0.005 mm Position spread Ps axis(es) X / Y 0.003 mm Z / W 0.005 mm Table clamping surface (lxw) 885 x 320 mm Rbedotp S R Hspfx Abmjt Working area T-slots: - Number 5 - - Width 12-H8 mm - Spacing 50 mm Permissible table load 250 kg Table height from floor 1040 mm Distance table-spindle nose (min-max) 0-120-620 mm Horizontal projection 300 mm Work spindle Quick-change tool system SF 32 - Hydraulic tool change via push buttons - - Repeat accuracy 0.002 mm - Changing time (manual) approx. 5 sec Speed range (infinitely variable) 50-9,000 rpm Drive power 7.6 kW Max. Torque 65 Nm Cutting capacity Drilling capacity ø 25 mm Thread cutting M 20 - Shuttering Semi-shuttering with sliding doors - - Coolant Coolant: Lubrication - External tank, capacity 100 l - Pump flow rate 75 l/min Central lubrication system Vogel

Condition: used, Year of construction: 2020, Console / table Horizontal clamping surface (L x W) mm 315 x 710 T-slots (number / width / distance) mm 5 / 14 / 63 Spindle / table distance mm 100 - 450 Max. table load kg 200 Rbedpfxou Tfgxo Abmot Travel, automatic / manual Longitudinal travel (X-axis) mm 400 Transverse travel (Y-axis) mm 315 Vertical travel (Z-axis) mm 350 Vertical milling spindle Spindle holder DIN 2080 ISO 40 Spindle speeds rpm 80 - 3,000 Pivoting degrees +/- 45 Quill stroke, manual mm 80 Feed rates Rapid traverse (X/Y/Z) m/min 5 / 5 / 2.5 Feed rate (X/Y/Z) mm/min 2,000 Drive power Total power kW 7.5 Machine dimensions and weight Length mm 1'520 Depth / width mm 2,130 Height mm 1'950 Weight kg 1'700