Used Radial Drill for sale (5,513)

Condition: ready for operation (used), functionality: fully functional, Invema radial drilling machine Arm length: 130 Drilling capacity in steel: 45 mm Dkjdpezv T E Nefx Ak Ajw Accessories: cube

Condition: used, Donau DR52 Drilling capacity in steel (diameter) 52 mm Arm length 1140 mm Workpiece height max. 830 mm Drilling capacity in cast iron 60 mm Taper MK 5 Dedpfxoz D U Tzj Ak Aekw Table size 1100 x 620 mm Drilling spindle stroke 225 mm Spindle speed range 28 - 1400 rpm Feed rate 0.1 - 0.5 mm/rev Total power consumption 10.0 kW Machine weight approx. 3.5 t Machine dimensions approx. 2.4 x 1.3 x 2.61 m

Condition: used, Radial Drilling Machine GSP type 49S22 Spindle: Ø 125 mm Cone: CM6 Spindle exit: 600 mm Spindle speed: from 17 to 1050 RPM Arm travel: 1800 mm Maxi height column travel: 1800 mm Column diameter: Ø 600 mm Djdpfx Akoz Nxnhe Aekw Total column height: 3000 mm Spindle speed: 11 kW Drilling/tapping function Mechanical locking of the column Hydraulic locking of the trolley Auto descent Delivered with one cube Cube dimensions: L 800 x W 560 x H 600 mm Table size: L 3300 x W 1400 x H 320 mm Voltage: 380 V Weight: 12 T

Condition: good (used), Year of construction: 2015, total width: 1,800 mm, total length: 3,700 mm, total height: 4,300 mm, overall weight: 14,000 kg, Maximum drilling capacity in steel: 75 mm Length:3700mm Width:1800mm Height:4300mm Djdpfezi S Snex Ak Aokw Weight:14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1985, spindle turning speed - stepless 26 - 1650 U/min Dkedsvylh Uspfx Ak Aow voltage 380 V 0 50 Hz rated current 15 A connected load 6,5 kW tool taper MK 4 weight of the machine ca. 2,3 t dimensions of the machine ca. 1500 x 1200 x 2500 mm Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Connection: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Column lifting speed: 40 mm/s Column stroke: 450 mm Drilling spindle stroke: 200 mm Drilling zone: 430 - 1150 mm Height adjustment of the drilling spindle: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm

Condition: used, Year of construction: 1976, Technical details: bore capacity in steel (diameter): 32 mm arm length: ./x. . 400 / 50 mm drill head horizontal traverse: 400 mm drilling head vertical adjustable: 400 mm bore spindle stroke: 150 mm spindle taper MT: 4 grinding spindle speed: 100 - 2000 U/min Arm length: Spindel: min./max: ca. 400 / 50 mm cantilever adjustment vertical: 850 mm cantilever adjustment horizontal: 400 mm Dedpfxewi Iqve Ak Aekw arm: Länge: 1360 arm horizontal: schwenkbar mm/min number of revolutions per minute of drill spindle:: 100...2 step U/min. feed steps: 0,1 / 0,2 / - step mm/U Table dimensions: 00 x 510 mm distance table - lower edge spindle: min./max.: 350 / 800 mm total power requirement: 2,4 kW weight of the machine ca.: 1,8 t dimension machine xH: 1,3 x 1,3 x 2,25 m Equipment: 2x foot rail Attachment option for a vertical table Accessories: Various clamping devices *

Condition: ready for operation (used), MAS VR4A radial drilling and milling machine Type: VR4A Height adjustment 750 mm Throat 1250 mm Spindle diameter: 80 mm Mounting MC5 Spindle stroke: 300 mm Speed: 2500 rpm Bed: 760 x 1400 mm Dimensions: 225 x 90 x 255 cm LxWxH Weight 3200 kg With separate coolant tank and pump Dkodpfx Aov Nzcaek Aew

Condition: used, Year of construction: 1980, taper MK 3 feed: 4 Stufen 2580 x-travel 2500 mm Dsdpfxjzfqmpj Ak Aekw throat 1000 mm 1000/2800 mm weight 3,7 t

Condition: good (used), Year of construction: 2014, Offer 26252 Dkodpfx Aszwftzek Aow Technical data: - Drilling capacity in full steel ST 60: 22 mm - Drilling capacity GG 25: 32 mm - Thread cutting ST 60: M 20 - Thread cutting GG 25: M 24 - Drill spindle mounting: MK 4 - Quill stroke: 140 mm - 18 drill spindle speeds: 60 - 3050 rpm - Drilling feed, stepless: 0.075 - 0.15 - 0.70 mm/rev - Drilling radius min / max: 420 / 1320 mm - Swivel angle: 320° - Table size: 1200 x 600 mm - Table height: 905 mm - Motorized height adjustment / stroke of the drill column: 430 mm - Hydraulic column and arm clamping - T-slots, vertical, on the left side of the machine - Coolant system - Drive: 400 V / 1.1 / 1.6 kW - Space requirement: approx. W 1300 x H 1910 / 2340 x D 2700 mm - Weight: approx. 1800 kg

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, This 2A576 radial drilling machine has been completely overhauled and restored to full producbon capacity. Basic technical data: Drilling diameter: in steel 80 mm / in cast iron 100 mm Headstock travel along the arm: 2000 mm Max drilling radius: 2500 mm Spindle travel: 500 mm Dkjdpour H I Nefx Ak Aew Spindle: ISO50 Stepless sefng of spindle feed rates Spindle speed range: 2-1600 rpm. Column diameter: 500 mm Main drive engine power: 7.5 kW Dimensions L/W/H: 4180/1280/4125 mm Weight: 12 tons This drilling machine meets the minimum safety and health requirements set out in Direcbve 2009/104/EC, known as the "Tools Directive". Machine ready for checking under power in our warehouse in central Poland.

Condition: ready for operation (used), functionality: fully functional, COLETT - Gamesa – Radial drilling machine “PORTABLE, operated by crane” -Outreach approx. 1200 mm -Universal swivel head -Spindle speeds 95 – 750 rpm -Automatic feed -Morse taper shank MK 4 Djdpfx Akjzpfy Ss Askw -Outreach height-adjustable, approx. 1400 mm -Control cabinet / Retrofit Dimensions: L x W x H 2 x 1 x 2.1 meters / Weight 1600 kg Errors and omissions excepted.

Condition: used, machine/vehicle number: 9125044, with clamping cube, size: approx. 650 x 500 x 500 mm, overhang: approx. 1000 mm. Djdpfxj Af Nkdo Ak Ajkw

Condition: ready for operation (used), Year of construction: 1984, total width: 1,600 mm, overall weight: 5,500 kg, arm 1600 mm; drilling capacity 55 mm; hydraulic clamping; stroke 6000 mm; weight 5500 kg. Dsdpfxoy Dqy Ne Ak Askw

Condition: ready for operation (used), Year of construction: 1975, arm 1200MM stroke head on bench 1400MM Dodpfx Akovm Akge Ajkw universal head portable radial

Condition: used, Year of construction: 1974, bore capacity in steel (diameter) 32 (St 60) mm arm length 418 / 1018 mm Dkjdpfs Ad Rltsx Ak Aew workpiece height max. ca. 400 mm table surface area 1200 x 500 mm spindle taper MT 4 quill stroke 190 mm distance table - lower edge spindle 260 - 660 mm table height over floor 800 mm spindle turning speed range 41 - 1800 U/min feeds 0,1 / 0,15 / 0,2 / 0,3 mm/U total power requirement 6 kW weight of the machine ca. 1,8 t

Condition: ready for operation (used), Year of construction: 1985, Available for immediate pickup at our location: Radial drilling machine TOA Type TRD 1000 F Year of manufacture 1985 Outreach 1000 mm Installation height 800 mm Taper shank MK 4 Spindle speeds 50 – 1230 rpm Dsdps Aa Inwefx Ak Aokw Drive power 4 kW Rotary table Vise Weight 2 tons Price: EUR 1,750.00 plus VAT, ex works

Condition: used, Year of construction: 1972, bore capacity in steel (diameter) 50,0 mm arm length 1.350 mm workpiece height max. 1630 mm turning speeds 19 - 1320 U/min Dedpfewiikdox Ak Askw bore spindles - Morse Taper 5 MK engine output 5,5 kW weight 5 t range L-W-H 2,4 x 1,0 x 3,55 mm feed movement 475 mm floor plate size: 1650x1000 mm feeds 0,07-2,9 mm/U

Condition: used, Year of construction: 1984, bore capacity in steel (diameter) 32 mm arm length 950 mm turning speed range 51 - 1000 U/min turning speeds steps 12 bore spindles - Morse Taper MK 4 quill stroke 160 mm feed range 0,075 x 0,3 mm/min table surface area 1200 x 510 mm total power requirement 2 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 1,8 x 1,2 x 2,25 m High-speed radial end mill with - Thread cutting attachment - Vertical table 750 x 620 mm - Horizontal table 1200 x 510 mm - Emergency stop device Dkedpfeyfwzbex Ak Asw - Documentation Machine-No. 445

Condition: used, total width: 1,300 mm, total length: 1,750 mm, total height: 2,400 mm, Colour: Grey Empty weight: 2.000 kg Dkodszrgc Hepfx Ak Aew - Serial number: 955 - Drive system: Conventional - Arm length [mm]: 1570 - Y-axis travel [mm]: 1320 - Table length [mm]: 650 - Table width [mm]: 1300 - Drilling depth [mm]: 160 - Drilling capacity [mm]: 0 - Min. Reach [mm]: 300 - Max. Reach [mm]: 1100 - Tool holder: MK4 - Min. spindle speed [rpm]: 102 - Max. spindle speed [rpm]: 2000 - Options: Drill unit feed, Tapping function, Clamping block - Transport dimensions: 1750mm x 1300mm x 2400mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1990, taper MK 3 serial number 4131 Dkedpfx Aozkbqvek Ajw throat 1000 mm documentation ja clamping hydraulisch kW weight of the machine ca. 2,6 t

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, spindle mount: MK 4, overall weight: 2,500 kg, drilling capacity: 40 mm, spindle speed (max.): 1,655 rpm, Radial Drilling Machine OOYA RE 1000 Radial Drilling Machine for Sale in Excellent Condition Manufacturer: OOYA Machinery Works Co. Ltd "JAPAN" Djdpfxowvufge Ak Ajkw Type: RE-1000A Speed ​​range 50% 12 Segments 32-1655 r/min (50 Hz) Projection 1000 mm Spindle holder MK 4 Drilling capacity in steel (diameter): 35 mm Drilling capacity in cast iron (diameter): 40 mm Arm vertical travel distance: 650mm Spindle diameter: 60 mm Column diameter: 320 mm Clamp base plate: 1020x650mm Clamping block: 450 x 650 x 500 mm ca Spindle diameter: 60 mm Column diameter: 320 mm Power: 3 x 200v 50Hz (Japanese voltage standard) Main motor: 2.2 kW Arm lift motor: 1kw Coolant pump motor: 50 watts Weight: 2.5 t Space requirement approx. 2.1 x 1.16 x 3 m If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Year of construction: 1983, bore capacity in steel (diameter) 50 mm arm length 1250 mm workpiece height max. 1500 mm bore capacity in cast iron 60 mm threading . diameter of quill . mm spindle taper MT 5 turning speeds 28-2.500 U/min Max. drilling capacity taper: Diameter: 50 mm Max. spindle-to-table distance: 1500 mm Min. spindle-to-table distance: 320 mm Travel spindle: 310 mm KW: ??4 Volts: 400 Machine number: 869 Included: Clamping cube 1000x750x500 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Dksdpfsyqv Ukex Ak Ajw If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, functionality: fully functional, KOVOSVIT VO 63 Radial Drilling Machine – Drilling Capacity 80/100 mm For sale: used KOVOSVIT VO 63 radial drilling machine, manufactured in the former Czechoslovakia. Heavy-duty industrial radial drill designed for drilling, boring, countersinking and tapping operations on large and heavy metal workpieces. The machine features a height-adjustable and swivelling radial arm, a horizontally movable drilling head and a heavy-duty base plate with T-slots. Technical specifications: - Manufacturer: KOVOSVIT Holoubkov - Model: VO 63 - Max. drilling capacity in steel / cast iron (solid drilling): 80 / 100 mm - Max. tapping capacity in steel / cast iron: M85 - Max. spindle nose diameter: 100 mm - Spindle travel: 380 mm - Spindle taper: Morse MT6 - Number of spindle speeds: 16 Dkodpez Rpadefx Ak Aew - Spindle speed range: 11.2–2,000 rpm - Number of spindle feeds: 16 - Spindle feed range: 0.035–2.8 mm/rev - Spindle reach min./max.: 386–2,000 mm - Distance from spindle to base working surface min./max.: 473–1,803 mm - Base working surface: 1,100 × 2,300 mm - Number of T-slots: 3 - T-slot width: 22 mm - Distance between T-slots: 250 mm - Main motor power: 7.5 kW - Power supply: 3 × 380 V / 50 Hz - Connected power: 10 kVA Dimensions and weight: - Length: 3,700 mm - Width: 1,380 mm - Height: 4,050 mm - Machine weight: 7,100 kg Equipment and features: - Height-adjustable and swivelling radial arm - Horizontally adjustable drilling head - Mechanical spindle speed and feed selection - Mechanical spindle feed - Heavy-duty base plate with T-slots - Conventional control Machine condition: Used machine in the visual condition shown in the attached photographs. Normal signs of age and previous use, including paint wear and areas of superficial corrosion. Further information available upon request.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 6234-3, drilling capacity: 40 mm, total length: 3,490 mm, quill stroke: 200 mm, total height: 2,950 mm, total width: 1,800 mm, table length: 1,800 mm, spindle speed (max.): 2,800 rpm, table width: 600 mm, type of input current: AC, overall weight: 2,900 kg, column diameter: 195 mm, input voltage: 400 V, input frequency: 50 Hz, distance table to spindle center: 705 mm, spindle motor power: 5 W, table height: 900 mm, distance table center to spindle nose: 95 mm, input current: 25 A, • Work table 1800 x 600 mm with 4T slots • Arm travel distance 1050 mm • Drilling spindle SK 40 with tool clamping device • Stepless speed programming Dodpfx Akoz R Rv Re Askw • Stepless quill feed via three-phase servomotor • 2 T-slots 18 mm on the machine base at the rear • 2 T-slots 18 mm on the machine base on the left • Thread cutting device • Central lubrication • Coolant system • CE marking • Includes attachments as shown in the photo

Condition: used, Year of construction: 1988, Dalmastroj BRB-3 Conventional quick-feed radial drilling machine Condition: Used Year of manufacture: 1988 Technical data: Drilling capacity in steel: Ø 30 mm Overhang: 430 - 1000 mm Column diameter: 200 Workpiece height: 500 mm Drill spindle taper: MK 4 Speed range: 100 to 1120 rpm (8 speeds) Head swivel: 360° Motor power: 1.4 / 1.8 kW Connection: 400 V Dksdpezhualefx Ak Aow Machine weight: approx. 2100 kg incl. accessories Equipment: - Coolant foot with pump - Thread cutting device - Drilling depth stop - Drill chuck