Used Radiator Core for sale (1,637)

Condition: excellent (used), 2 pieces shooting head and one shooting head extension for a Roeper H12, very good condition, ready for immediate use Lrjdpfed Tx Azjx Ab Tjh

Condition: excellent (used), 1 piece shooting head, dimensions see photo, very good condition, ready for immediate use Lodpfx Aod Tx A Asb Tsrh

Condition: good (used), Core Sand Mixers, Green Sand MixersVarious sizes and manufacturers, (the photos show only a small part of the selection) immediately available from stock Lredjd Txz Uopfx Ab Tjh

Condition: used, Diamond core drilling machine, drill, REMS Picus S1 Basic-Pack electric diamond core drill + REMS Simplex 2 drill stand, Used machine Manufacturer: Rems Type: Picus S1 Overall dimensions: Width: 670 mm Depth: 260 mm Height: 160 mm REMS Picus S1 Basic-Pack Motor: 1850 W universal motor Speed (under load): ~ 580 rpm Max. drilling diameter in reinforced concrete: Ø 102 mm (up to Ø 132 mm under certain conditions) Max. drilling diameter in brick / masonry: Ø 162 mm Drilling depth: up to 420 mm Weight: approx. 5.2 kg Connections & accessories: Drill bit connection: UNC 1¼ external thread, G ½ internal (water connection) Water supply unit with shut-off valve, quick coupling, and water stop function Multifunctional electronics: soft start, overload protection, idle speed limiter, blockage protection Safety slip clutch Lodexpqvrjpfx Ab Tjrh REMS Simplex 2 Drill Stand Suitable for core drilling up to Ø 200 mm Drill column: precision, square steel profile Ø 50 mm Adjustable for floor unevenness: 4 screws for correction Slide guide: adjustable on all sides, with preloaded plastic bearings Drive: rack-and-pinion system with ratchet lever operation Clamp and collar for Ø 60 mm gearbox mounting Integrated spirit level, with slide lock for easier adjustment and transport Weight: approx. 12 kg

Condition: new, Optimum OPTIdrill DM 50V magnetic core drilling machine High-quality machine with infinitely variable speed control and maximum functionality. TECHNICAL DATA Dimensions and weights Length (product) approx. 250mm Width/depth (product) approx. 220mm Height (product) approx. 300 - 470mm Weight (net) approx. 11kg Drive power Input power 1.7kW Mounting Spindle holder fixed Lodpfx Aet Ifidob Terh Drill holder Weldon 3/4 " Speed range Speed(s) at idle (clockwise rotation)100 - 810 min¯¹ Infinitely variable speed control Electrical data Supply voltage 230V Mains frequency 50Hz Standards and approvals EMC class C2 Standard DIN EN 55011 Protection class IP 42 Magnet Magnet holding force 15.6kN Magnetic base length 166mm Magnetic base width 80mm Core drill Max. core drill diameter with manual feed 50mm Drilling depth max. core drilling with manual feed 50mm Solid drill Drill diameter max. solid drill directly mounted 13mm SCOPE OF DELIVERY Carrying case Operating tool Safety belt Quick-change chuck EQUIPMENT Vario drive ✔ Manual quill feed

Condition: used, functionality: unexamined, machine/vehicle number: SPA-3 | RADEYE SX DB-078, Thermo Fisher SPA-3 Radiation meter set Lodpfx Abexcufwj Terh Thermo Scientific SPA-3 Waterproof High Sensitivity Gamma Detector for use when high sensitivity to radiation is required. Set includes: Two travel cases, SPA-3 Radiation Meter, RadEye SX DB-078 Detector, stand, cover, cable, and instruction manuals.

Year of construction: 2004, condition: excellent (used), WEBER 3 layer PVC foam core pipe system with: 2 WEBER DS 9.25 DOUBLE SCREW EXTRUDER Year of manufacture 2004 WEBER DS 9.25 DOUBLE SCREW EXTRUDER Year of manufacture 2004 Application PVC foam core pipe (three layer) Lrsdpfx Abet Rcn Ns Toh Only the extruders are sold, without feed block The screws and cylinders of the two extruders are in very good condition The system is in very good working order The system is my property Sahal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Germany

Year of construction: 1990, condition: repair required (used), The machine of this series is used for the automatic waste-free production of rolls, cores and other cylindrical rolled articles. Only strip material is processed. Lsdpfofnqbwox Ab Tsrh Starting material: strip thickness from 0.7 to 1.5 mm from 3 to 23 mm width / 2 mm to 23 mm width. The machine operates automatically / loading is independent. Required machine area approx. 1500 x 1000 mm Switch cabinet approx. 800 x 350 mm Machine weight approx. 800 kg Switch cabinet approx. 60 kg Output machine max 300 pieces/min. Automatic material reel included.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, working range: 1,000 mm, For sale is a completely refurbished Schlatter radiator welding line consisting of: - Back-up ring unit (EBV) - 2-row multi-spot welding machine (hydraulic) - 2-row convector welding machine (pneumatic) Ledpfxjv Edlvs Ab Tjrh - Longitudinal seam welding machine (NFR) - Cross-seam welding machine (NQD) - Cutting shear (TS10) - Corner cutting machine (ESV) - Transverse edge closing device (QRSV) - Transport & turning device (TVW) - Nipple & spacer welding system (NIAH) - Test basin (water) Control system: Siemens S7 TIA Please note that the radiator welding line is only available in a fully refurbished condition.

Condition: like new (used), Year of construction: 2016, Max. winding width 2350mm Clear width 2600mm Winding shafts 6”/ 3” Max. mechanical speed 250 m/min Max. mechanical diameter 980 mm Material thickness range 15 – 200 µm Edge trimming In-Line with razor blade Spreader rollers Partially driven Additional components Non-stick rollers Winding mode Gap and contact Tension control Multiple points driven/tension-regulated Dancer roll roller made of CFRP Satellite roll Adjustable angle Roll change Fully automatic on storage table for diameters up to 980mm Output of finished rolls Via robot ( 3-axis robot) Core Magazine Overview Lrsdpfx Ajwfrdrob Tsh Core Magazin Automatic loading of the empty winding shaft Kind of cores Cardboard / Plastic Core diameter 3“ Storage table Second storage table for 15 rolls of 200mm diameter available Cycle time roll change Max 4 minutes Safety Safety fense , Indoor Scanner

Year of construction: 2021, condition: like new (used), (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, Lodpfx Abewurq Rj Terh for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Lrsdewurqkopfx Ab Teh Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: as good as new (ex-display), CMT–VSR Pro is an advanced high-speed core balancing machine including a manually operated, fixed-mount correction cutter that ensures a fine quality surface finish and a servo-controlled air valve to provide the highest measuring accuracy. The machine has been designed for the high-speed balancing of turbocharger core assembly of passenger car, light- and heavy-duty trucks. It is used for checking whether there is any unwanted dynamic phenomenon of a rotor at high rotational speed value e.g. the flexural of shaft by the moment of force. Balancing in a full range of rotational speed extends lifespan of turbocharger and eliminates the undesirable effect of whistling. Lredpsiihqwefx Ab Teh Core is installed on the hub of the machine by the use of a mounting flange with the two clamps to lock it. Turbine wheel is driven by compressed air supplied through a drive sleeve with a nozzle system. During a measurement an oil with an appropriate temperature and pressure is supplied, as a result of which the balancing conditions are similar to those of a combustion engine. As a result, the vibration graph of a core in relation to a rotational speed value and a vibration norm is displayed. In addition, to simplify the analysis of the vibration graph, the software indicates the exact angular position of a mass correction

Year of construction: 2024, condition: new, machine/vehicle number: KU 2400, The cabbage coring machine provides the ability to cut cabbage core out of the head or more often, crush the stalk (then there is an opportunity to use raw materials 100 percent, it is also useful for the quality of sauerkraut). Combined electric and pneumatic power.​ General Features: All materials that come in contact with products are made from food-grade materials Productivity is up to 2400 heads per hour Lredpfxjffwfye Ab Teh Two coring lines Can be used to cut irregular shape cabbages also Easy to clean, can be washed with low-pressure water; Can be equipped with wheels with a fixation for easy transportation; Can work separate as well in line with cabbage shredder SS80 7500kg/h Various electrical connections and standards available on request;

Condition: new, Year of construction: 2025, Cardboard Core winder maschine for Toilet Tissue paper rolls Specifications • Carton web width 60 - 76 mm • Production speed 35 - 40 m / min • Core i. diameter 40 mm - 80mm • No. of plies 2 , 3, 4 plies. (more optional) • Cut off length 600-2900 mm Features • Operation with either hot or cold glue. • Exchangeable mandrels. (for different core size) Lrjdpfsit N Rvex Ab Tsh • Crush cutting by two or three circular cutters with synchronized movement. • Variable speed – electronic. (three phase)

Condition: new, Turbocharger core balancing machine DBST-20 Low-speed turbocharger core balancing machine meets the needs of turbocharger repair workshops. Machine is used for balancing common truck and passenger car turbos. It is multi-functional and universal, so it is suitable for many large turbochargers of special vehicles, railroad and marine turbines, and even for industrial turbochargers of gas and diesel power plants. Ljdpfx Asn Nxcfob Terh The DBST-20 is used for balancing common truck and car turbochargers. It is multifunctional and universal, so it is suitable for many large turbochargers of special vehicles, railway and marine turbines, and even industrial turbochargers of gas and diesel power plants. This stand allows for the final balancing of cartridges due to the specific design features of large turbines. The stand is used for balancing turbocharger cartridges at low speeds, as well as for checking turbocharger cartridge oil leaks. This is a larger version of the DBST-10 model that our company has developed specifically for large turbochargers weighing up to 30 kg. HIGHLIGHTS High accuracy of determining the unbalance of the rotor (0.4 g ∙ mm / kg). Reinforced torsional vibration suspension - high accuracy of vibration transmission, quality balancing results. Mounting the cartridges on their standard surfaces (as on the engine) allows the installation of almost all turbochargers. Wide range of accessories and adapters for installing any kind of turbos. Includes adapters for installing turbochargers with lower oil inlet. Oil system with oil heating allows to recreate similar conditions to the real one during balancing. 3-stage system of oil filtration allows to eliminate an unbalance directly on the machine by portable grinders. The measuring system displays the balancing process in real time and monitors the rotor unbalance behaviour on the screen to achieve the best possible result. Rotor adjustment and machine calibration are performed by the operator, ensuring maximum machine sensitivity at all times. Safe turbo shaft speed allows risk-free quality running-in of assembled cartridges, which significantly increases cartridge reliability after repair. KEY FEATURES • High accuracy 2 plane balancing • Truck and car turbocharger balancing • Any turbocharger can be installed • All type turbocharger adapters included • Quick and easy turbo core installation • Balancing speed up to 10 000 rpm • Fast oil heater and temperature regulation • 3-stage oil filtration • Real-time unbalance measurement • Calibration of the machine by the operator • Industrial fanless touch screen PC control system • Creation and printing of reports on turbocharger balancing SPECIFICATIONS Maximum turbocharger weight 30 kg Maximum turbocharger diameter 300 mm Maximum turbocharger length 300 mm Maximum rotation speed 10 000 rpm Minimum achievable residual specific imbalance, 0,4 g mm/kg Pneumatic system operating pressure 0,6 – 0,8 MPa Power supply 220V, 1Ph, 50Hz Power input 1,5 kW Dimensions 1120 х 780 х 1350 mm Weight 285 kg

Condition: ready for operation (used), Year of construction: 2019, This 6-axis Fruitcore Horst600 Fast robot arm was manufactured in 2019. It features a nominal load capacity of 3 kg, a maximum range of 584 mm, and operates quietly at less than 70 dB(A). The robot arm is designed for a compact installation area of 382 × 200 mm and is protected by an IP54 class. If you are looking to get high-quality automation capabilities, consider the Fruitcore Horst600 Fast machine we have for sale. Contact us for more information. • Axes: 6 • Nominal Load: 3 kg • Max Range: 584 mm • Repeatability: ± 0.05 mm • Protection Class: IP54 Lsdpfxjx D Nbvs Ab Torh • Noise Level: < 70 dB(A) • Weight: Approx. 30 kg • Power Supply: 230 VAC, 50–60 Hz • Ambient Temperature: 5 – 40 °C • Installation Area: 382 × 200 mm • Base Drilling Pattern: 200 × 100 mm • Standard Color: RAL 5021 (Aqua blue) • Dimensions: 313 × 174 × 446 mm (H × W × D) • Weight: Approx. 10 kg • Protection Class: IP20 • Power: 24 V / 7 A • Power Supply: 24 V / 2.5 A on tool flangeFast version, which offers significantly higher processing speeds and optimised cycle times compared to the standard version. The robot was only operated for approx. 1–2 hours for testing purposes and is therefore in almost new condition – technically and visually flawless.

Condition: used, wire electrode, welding wire, welding wire -Metal powder: - Cored wire -Net weight: 15 kg -Number: 28x packages available -Price: per package -Weight: 15.6kg/package Lodpfxeci Shle Ab Torh

Condition: used, Starter Delko-Remy -Voltage: 12 V Lsdsd N N Dhspfx Ab Tsrh -Type: 1108 2 7A 14 -from forklift: Still EFG 1.0/5002 -Teeth: 10 -Dimensions: 305/180/120 mm -Weight: 11.5 kg

Condition: used, Bosch alternator -Type: 1100827 22A 76E 3 -Voltage: 12 V -from forklift: Still type EFG 1.0/5002 -Dimensions: 187/165/H140 mm Lodpfxjd N N Dlj Ab Torh -Weight: 4.6 kg

Condition: used, Thyristor -Type: S6070W -Price: complete -Number: 250 pieces Lsdpsdnllnsfx Ab Terh -Dimensions: 175/130/H215 mm -Weight: 1.3 kg

Condition: used, Thyristor -Type: S8070W -Price: complete Lredpfx Abednllpe Tjh -Number: approx. 250 pieces -Dimensions: 175/130/H215 mm

Condition: used, Thyristor -Type: S6070W -Price: complete -Number: 3x 250 pieces Lodpfjdnllqox Ab Tjrh -Dimensions: 175/130/H215 mm per package

Condition: good (used), Starter Delko-Remy Lredjb A R Uwopfx Ab Tsh -Voltage: 12 V -Type: 10479628 -Teeth: 10 -Weight: 11 kg

Condition: used, Year of construction: 2007, Motor pump Corema, year of manufacture approx. 2007, full current 3.5 A Lrsdpfexrthvsx Ab Toh