Used Radius Grinder for sale (2,680)

Condition: repair required (used), Year of construction: 1989, functionality: limited functionality, machine/vehicle number: BO 15263, total width: 2,300 mm, total length: 2,300 mm, total height: 1,700 mm, travel distance X-axis: 500 mm, travel distance Z-axis: 200 mm, grinding diameter: 150 mm, grinding length: 500 mm, input frequency: 50 Hz, Equipment: documentation/manual, J&S 1096 grinder: issues with the CNC control system. Rjdpez Dgphefx Afgjch

Condition: ready for operation (used), A Se-Ma meat grinder and bowl cutter combination machine is available. Bowl cutter volume: approx. 50l, bowl diameter: 940mm, upper edge height on bowl cutter side: 820mm, knife heads: 6, grinder plate diameter: 130mm, feed bowl internal dimensions X/Y: 600mm/820mm, feed bowl external dimensions X/Y: 630mm/850mm, upper edge height on grinder side: 1040mm, machine dimensions X/Y/Z: approx. 1800mm/1050mm/1400mm, weight: approx. 500kg. The machine is not equipped with a mixing gear. An on-site inspection is possible. Rcodpfx Afjzkvl Isgjh

Condition: refurbished (used), grinding length: 600 mm, grinding width: 200 mm, grinding length 600 mm grinding width 200 mm electromagnetic chuck 450×175 mm Rcsdpfx Asxal Hysfgsh X-travel 660 mm Z-travel 225 mm grinding wheel size 250x25x51 mm Control Jung TouchScreen weight approx. 3000 kg

Condition: excellent (used), Year of construction: 1988, TECHNICAL DATA. Max. clamping length: 90 mm Tool clamping height with tapered shank: 50 mm Tool clamping height with straight shank: 45 mm Max. helix angle: 45° Number of clamping positions: 1 to 99 Max. slide travel: 550 mm Max. grinding wheel diameter: 350 mm Min. grinding wheel diameter: 150 mm Grinding wheel speed (variable): up to 2700 rpm Swivel range of grinding spindle axis: 0° to 15° Grinding slide feed rate (variable): 0.05 to 16 mm/min (with 3rd and 4th axis: 0.05 to 8 mm/min) Workpiece spindle taper: ISO Taper No. 40 Grinding Wheel Data CBN and diamond cup grinding wheel: Ø200 mm → Min. DFF: 66 (3rd axis), 76 (4th axis) Ø250 mm → Min. DFF: 16 (3rd axis), 26 (4th axis) Rodpjwwkacofx Afgjch CBN-ES cone grinding wheel: Ø200 mm → Min. DFF: 50 (3rd axis), 60 (4th axis) Ø250 mm → Min. DFF: 0 (3rd axis), 10 (4th axis)

Condition: excellent (used), Year of construction: 2016, operating hours: 200 h, functionality: fully functional, total height: 1,760 mm, total length: 1,100 mm, total width: 850 mm, workpiece weight (max.): 12 kg, spindle speed (max.): 10,000 rpm, spindle speed (min.): 500 rpm, feed length X-axis: 100 mm, feed length Y-axis: 190 mm, feed length Z-axis: 325 mm, type of input current: three-phase, grinding wheel diameter: 125 mm, overall weight: 520 kg, grinding length: 270 mm, rotational speed (min.): 500 rpm, rotational speed (max.): 10,000 rpm, center height in crank: 220 mm, center height: 300 mm, collet bore: 25 mm, grinding spindle speed: 10,000 rpm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, pivoting range: 360 °, travel distance X-axis: 100 mm, travel distance Y-axis: 190 mm, travel distance Z-axis: 325 mm, center width: 620 mm, grinding spindle motor power: 1,100 W, table length: 190 mm, table width: 200 mm, table height: 1,020 mm, power: 1.1 kW (1.50 HP), height adjustment type: electric, workpiece diameter (max.): 400 mm, input current: 20 A, grinding diameter: 300 mm, input frequency: 50 Hz, disc diameter: 125 mm, input voltage: 280 V, space requirement width: 2,000 mm, space requirement length: 1,800 mm, space requirement height: 1,800 mm, grinding wheel speed: 10,000 rpm, year of last overhaul: 2022, distance table to spindle center: 325 mm, tool diameter: 300 mm, workpiece length between centers: 270 mm, distance between centers: 270 mm, number of spindles: 1, Equipment: rotational speed infinitely variable, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 12000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! 2016 S25 003004 V, 50/60 Hz, with CEE plug and cable Color: light gray motorized height adjustment, axial grinding spindle adjustment Equipment: * Opto-electronic measuring device with measuring electronics Image processing, PC (Original ISOG) * CCD camera and monitor * Dividing head Sk 40 with dividing disk 24 R * 1 dividing disk each 14, 16, 18 * Tightening screw M 16 * Counter bearing complete with 4 center punch points * Center point Sk 40 with driver * Twist-u. Relief grinding device with rack housing * Dust extraction completely without vacuum cleaner * LED machine light * Tooth support complete with support and sliding blades * Setting gauge * Universal setting gauge * Handwheel facility * Dressing device with 3 diamonds * 1 set of collets 1.0 - 17.5 mm by 0.5 mm rising * Pliers sleeve and extraction nut and key * 10 pieces of direct collets Sk 40 6 - 25 mm * 4 cone reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * Clamping nut * 12 grinding wheel chucks * Tool cabinet with shelves * 2 protective hoods * various diamond / borazon discs * Operating instructions and key, spare parts list, circuit diagram * Set of technical grinding instructions ##### Machine is partially overhauled and has an electrical acceptance Rcodpfx Afsw U Ehbjgeh report!#####

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, total height: 1,760 mm, total length: 1,100 mm, total width: 850 mm, workpiece weight (max.): 12 kg, spindle speed (max.): 10,000 rpm, spindle speed (min.): 500 rpm, type of input current: three-phase, grinding wheel diameter: 125 mm, overall weight: 520 kg, grinding length: 190 mm, rotational speed (min.): 500 rpm, rotational speed (max.): 10,000 rpm, center height in crank: 220 mm, center height: 330 mm, collet bore: 25 mm, grinding spindle speed: 10,000 rpm, feed rate Z-axis: 1 m/min, pivoting range: 360 °, travel distance X-axis: 100 mm, travel distance Y-axis: 190 mm, travel distance Z-axis: 325 mm, center width: 620 mm, grinding spindle motor power: 1,100 W, table length: 500 mm, table width: 180 mm, table height: 1,020 mm, power: 2 kW (2.72 HP), height adjustment type: electric, workpiece diameter (max.): 620 mm, input current: 20 A, grinding diameter: 130 mm, input frequency: 50 Hz, disc diameter: 125 mm, input voltage: 360 V, space requirement width: 2,000 mm, space requirement length: 1,800 mm, space requirement height: 1,800 mm, grinding wheel speed: 10,000 rpm, year of last overhaul: 2025, warranty duration: 12 months, distance table to spindle center: 325 mm, tool diameter: 400 mm, workpiece length between centers: 270 mm, distance between centers: 300 mm, surfacing fence height: 190 mm, Equipment: rotational speed infinitely variable, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm current capacity 380 kVA power capacity - grinding motor 1,1 kW speeds of grinding spindle 2 - 10.000 U/min total power requirement 2,2 kW !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! * Machine and accessories completely overhauled with CE marking 400 V, 50 Hz, with CEE plug and cable BASICMACHINE!!! overhauled in 2023 Color: 2 K repainting Stand RAL 7005 mouse gray Structure and accessories RAL 7035 light gray motorized height adjustment, axial grinding spindle adjustment * Complete electrical conversion includes: > Fi circuit breaker > new three-phase drive > new brake motor > new frequency regulation > new touch-safe built-in electronics > EMV screw connections > EMV cables > new protective tubes > Emergency stop switch > new control panel * Machine stand milled + ground, new carrier plate Basic equipment: - LED light Waldmann - Suction without a vacuum cleaner - Protective cover for grinding wheels up to Ø 125 mm - Set of technical information Rcodpfx Aow U Ehhjfgoh - Abrasive wheel holder 51 mm - Set of suspension devices for transport - 5 adjusting screws * Operating key, operating instructions, spare parts list, circuit diagram * technical grinding instructions * CE-documents * Machine and accessories overhauled and with electrical acceptance report * abroad 6 months warranty

Condition: excellent (used), Year of construction: 2017, operating hours: 595 h, WWB200 SuperGrinder. Perfect machine for kebab factories, sausage and burger producers etc. Has run for 595 hours only. Rodpowhagtjfx Afgsch

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 126 0647, KOLBE MWE 52 mixer grinder with CARS HKW 200 crate lifter! MACHINE DETAILS Power: 10.0 + 1.1 kW Connection voltage: 400 V Frequency: 50 Hz Control voltage: 24 VAC Operating voltage: 400 V Rated current: 20.5 + 2.8 A Redpfx Aexrt Nyjfgjch Main machine dimensions: 185 x 150 x 200 cm Lifter dimensions: 80 x 100 x 290 cm Weight: 800 kg.

Condition: used, Bäuerle universal tool grinding machine for woodworking and metalworking tools. Redpfx Afexytmujgoch

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm -Motor: Teknodan 3 kW 2850 rpm -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete -Overall dimensions: 1000/900/H1685 mm -Total weight: 228 kg Rcsdeydi A Ijpfx Afgsh

Year of construction: 2024, condition: excellent (used), Segment radius top tooling for 1000 and 2000 Ton machine Full sets segmented on 835 mm and 10 sections to make 8000 mm Radius 30 / Radius 31 / Radius 32 / Radius 33 / Radius 35 Radius 36 / Radius 39 / Radius 40 / Radius 41 / Radius 42 Rcedpfox Sxukjx Afgoh Radius 43 / Radius 45 / Radius 47 / Radius 48 / Radius 50 Radius 51 /  Radius 53 / Radius 55 / Radius 57 / Radius 58 Radius 60 / Radius 62 /  Radius 70 / Radius 71 / Radius 73 / Radius 75 / Radius 80 Length:12000mm Width:2000mm Height:1000mm Weight:15000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2003, max. grinding diameter 5-50 mm grinding length 350 mm workpiece length 50-300 mm diameter 5-50 mm current capacity 70 kVA Control Siemens Sinumerik 840D weight of the machine ca. 9 t dimensions of the machine ca. 3300x2950x2400 m Power supply: 400 V/50 Hz Power: 70 kVA Fuse protection: 3X125A Conductor cross-section: 5X25 mm² Cu Redpoyan R Nsfx Afgech Workpiece diameter: ? 5-? 50 Workpiece length: 50-300 - Manual loading and unloading - External fully automatic loading device - Workpiece spindle stock fixed on grinding table Workpiece spindle unit: Dimensions: ? 135 x 400 mm Lubrication: Permanent grease lubrication Bearing seal: With sealing air Drive: with HF motor Special mount: Junker standard collar ?75 mm Max. speed: 6000 min. -1 Tailstock: Longitudinal adjustment: manual Turning center: Junker standard collar ? 48 mm (?75 mm) Grinding table: Feed: Z-axis Grinding headstock: Feed: X-axis Horizontal swivel: B-axis HF grinding spindle unit I, II, III Dimensions: ? 165 x 350 mm Flange: ? 190 mm Standard collar: ? 127 mm Lubrication: Permanent grease lubrication Bearing seal: With sealing air Drive: 8 kW Balancing: Electronic Speed max. 8800 min -1 Grinding wheel I, II, III Type: Borazine (CBN) ceramic bonded Diameter: ? 350 mm Bore: ? 127 mm Coating width: max. 5 mm (standard) Peripheral speed: max. 140 m/s

Condition: used, Year of construction: 2016, Manufacturer : Kutter- und Gerätebau Wetter Model : AW D114 Year: 2016 Rsdpfx Afeyvv Ddsgech Type : automatic mincer / grinder Power : 9 kW Tank capacity : 110 liters Diameter of perforated disc: 114 mm Rotational speed – processing screw: 160/320 rpm Rotational speed – feed screw: 20–40 rpm Width : 820 mm Depth: 1260 mm Height: 1290 mm Weight : 570 kg Complete technical file  

Condition: used, TECHNICAL DETAILS - center height : 320 [mm] GRINDING WHEEL HOLDER HEADSTOCK - Left grinding wheels dimensions : 400 x 50 x 127 [mm] - Right grinding wheels dimensions : 225 x 20 x 76,2 [mm] - Power : 3 [kW] - Spindle speeds : 3000 [rpm] - Orientation of grinding wheel holder headstock : 270 [°] PART-HOLDER HEADSTOCK - Orientation of part holder headstock : 360 [°] - Spindle speeds : 20 - 400 [rpm] - Spindle internal cone : Morse 5 - Power : 0.9 [kW] POWER SUPPLY - Supply voltage : 380 [V] Rodpfeyn R I Tex Afgoch EQUIPMENT - Automatic cycle work (rough part, finishing and reverse) - Heidenhain display - Coolant tank * with paper filtering unit - 1 internal grinding spindle : 12000 [rpm]

Condition: excellent (used), Year of construction: 2012, Large grinder for fresh meat, these models were previously known as Wolfing C250UNI. Excellent condition. With de-gristle unit. Rjdpfxsvvn Ics Afgsch

Condition: excellent (used), Year of construction: 2004, table length 175 mm Rcsdpfjxvdr Tjx Afgoh table width 110 mm grinding wheel diameter 500 mm total power requirement 1 kW weight of the machine ca. 1,5 t

Condition: ready for operation (used), Grinding wheel diameter: 300 mm Rsdpfxsx E Rx Uo Afgech Grinding wheel width: 40 mm Grinding wheel speed: 1400 rpm Drive motor: 400 V, approx. 1.5 kW Weight: kg Required space: 700 x 400 x 1100 mm

Condition: excellent (used), Risco TR130 fresh meat grinder. Fully rebuilt. This grinder has a 200-litre bowl capacity and a 130-mm output grinding plate size. All s/s. Rsdpjx Sqwqofx Afgjch

Condition: good (used), Year of construction: 2016, operating hours: 1,030 h, overall weight: 535 kg, Laska WW130 2X Meat Grinder Rcsdpfx Ajzwdgtofgsh Laska meat grinders for perfect results. LASKA meat grinders guarantee – thanks to decades of experience in a variety of industries and with more than 1,000 machines on the market – maximum performance and minimum wear, both for fresh and frozen materials. The unique design also sets a new standard when it comes to cleanliness. High power with the ability to process directly frozen whole meat balls. This machine is ideal for a wide range of applications, including: Meat grinding Shredding vegetables and fruit Preparing animal feed And many more! Manufacturer: Laska Year: 2016 Model: WW 130-2X Perforated Disk: 130 mm Max. Output: 5,000 kg/h Hopper Capacity: 175 liters Electric Power: 400V / 19kW / 50Hz Machine Dimensions (LxWxH): 1,250 x 1,150 x 1,450 mm Machine Weight: 535 kg.

Condition: refurbished (used), Product number 1225 Machine dimensions: 760 x 980 x 1320 mm (width x depth x height) Sieve diameter: 130 mm Weight: approx. 470 kg Power: 16 kW Power supply: 400 V 50Hz 5N Rjdpfxezvrglj Afgsch Filling system: Auger Protection rating: IP 69 Capacity: 12 tons/8h Housing made entirely of stainless steel. Gearbox and motor overhauled. Device after major servicing, ready for operation.

Condition: new, Year of construction: 2026, The brass wire brush roller for the CORMAK MM3156C grinder is a durable and effective tool designed for cleaning and surface treatment of metal components. Made of high-quality brass wire, it ensures precise and safe operation. Thanks to the use of brass wire, the brush is safer for more delicate components than conventional steel wire brushes. It is ideal for restoring parts, preparing surfaces for further processing, and lightly finishing components. Easy installation and solid construction provide comfortable and precise operation in all workshop conditions. Applications: removing rust, paint, and deposits from metal surfaces, cleaning welds and edges, preparing surfaces before painting or soldering, polishing metal components, Rcedpfx Afszzw Thjgeh gentle treatment of soft metals and alloys where a steel wire brush could damage the surface.

Condition: used, TECHNICAL DETAILS - Maximum workpiece diameter : 152 x 152 [mm] - Conveyor speed : 0 - 5.1 [m/min] - Grinding wheel diameter : 457.2 x 254 x 63.5 [mm] - Speed : 1200 [rpm] Rjdpfx Aszwx Hzsfgech - Power : 18.38 [kW] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2300 x 1500 [mm] - Machine height : 2250 [mm] - Machine weight : 3350 [kg] EQUIPMENT - Siemens PLC - Coolant tank

Condition: excellent (used), Year of construction: 2006, functionality: unexamined, overall weight: 8,000 kg, JUNKERS FLUTEMAT: a CNC machine for highly flexible groove grinding. The FLUTEMAT is the perfect machine for creating grooves in various tool types. For example: • Application: Grinding 3 or 4 chip and flute grooves in HSS taps, milling cutters, and reamers. • Workpiece diameter: Diameter from 2 to 16 mm. Rcsdpfx Aszya Hhefgoh • Clamping system: The thread tool is precisely fixed in a square clamping device and the tailstock center. • In-process dressing: A CNC-controlled dressing unit is located directly behind the grinding spindle. • Enormous speed: a cycle time of approx. 75 seconds for an M12 HSS tap. • Design: The machine features a vibration-damping machine bed made of mineral cast. • Control: Modern control technology via the company's own Erwin Junker Operator Panel (EJ-OP). • Grinding media: Extremely durable CBN or diamond grinding wheels are used. • Manufacturer: Erwin Junker Maschinenfabrik GmbH • Model: FLUTEMAT • Year of manufacture: e.g. 2006 • Control: CNC Junker Operator Panel, e.g. Siemens Sinumerik • Workpiece diameter range: approx. 2 – 16 mm • Total workpiece length: Max. e.g. 150 mm • Number of grooves: 3- or 4-groove tools (straight and helical grooves) • Grinding spindle drive: e.g. 7.5 kW / 11 kW • Grinding media: Designed for CBN and diamond grinding wheels • Dressing unit: Integrated, CNC-controlled in-process dressing unit • Machine bed: Vibration-damping mineral cast • Included accessories: Oil mist extraction, • Coolant system • Robot cell with various clamping tables, • Various grinding wheel flanges, • Documentation/manuals. For more information? For example, a VIDEO is available upon request by email.

Condition: used, Year of construction: 2019, control Fanuc Series 31i - B Rcsdey Tprpopfx Afgoh workpiece length - max. 300 mm grinding wheel diameter 356 mm grinding wheel width 75 mm quill stroke 45 mm

Condition: good (used), total width: 3,500 mm, total length: 19,000 mm, total height: 2,100 mm, workpiece weight (max.): 6,000 kg, grinding diameter: 850 mm, grinding length: 6,000 mm, center height: 425 mm, Cylindrical grinder Schmaltz - RM 82/6000 MACH-ID 9492 Make: Schmaltz Type: RM 82/6000 Centre height: 425mm Grinding Ø: 850mm Rcjdpfoy Dr Easx Afgjh Grinding length: 6000mm Grinding stone dimensions:1100 x 80 x 560mm Grinding stone speeds: 700Rpm Table inclasement: -5 to +5° Tailstock: 160 x 100Mk Length: 19000mm Width: 3500mm Height: 2100mm Weight: 31000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!