Used Rectifier for sale (116)

Condition: used, Technical details: capacity at 100% ED: 400 A capacity: 60% ED = 500 A welding current: Gleichstrom V weight of the machine approx.: 230 kg dimensions of machine: 1,05 x 0,70 x 1,2 m capacity: 21 kVA Welding rectifier MIG / MAG Cooling type F Protection class IP 23 Crsdpeu Nwctofx Ab Uea Isolation class F incl. wire feed device, feed rate 0,5 - 20 m/min *

Condition: good (used), functionality: fully functional, type of input current: three-phase, overall weight: 800 kg, total width: 600 mm, total length: 820 mm, total height: 1,600 mm, input voltage: 400 V, Used Liebert NX 40kVA / 32kW 3-phase UPS battery backup system (tested and includes good batteries) Rated power: 0.8 PF: 40 kVA Output power 32KW Battery Battery type VRLA 40x YUASA NPL24-12 I 12V 24 AH Width mm 600 Depth mm 825 Height mm 1600 Weight (approx.) without battery kg 341 Input Parameters Rectifier Type IGBT-based Vector Controlled PFC (PF Corrected) Cedpfxet H Irlj Ab Uera Input Voltage to Rectifier Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 3-w Input Voltage to Bypass Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 4-w (Ph+N) Permissible Input Voltage Range for Rectifier Vac 305 to 477 Input Frequency Hz 50 or 60 Permissible Input Frequency Range for Rectifier Hz 40 to 70 Input Current THD at nominal voltage % < 3* without any Filter Input Power Factor at nominal voltage ≥ 0.99* without any Filter Flexi Power Walk-In seconds 5 to 30 (selectable) Output Parameters Inverter Type IGBT-based Vector, Repetitive & PI Controlled Output Power kW 24 32 48 64 Output Voltage Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 4-w (Ph+N) Output Voltage Regulation % +/- 0.5 (3-phase RMS average) Output Frequency Hz 50 or 60 Output Frequency Regulation % +/- 0.05 Output Voltage THD at nominal voltage % 1% (max) Capability to handle High Crest Factor Load 3 : 1 (compliant with IEC 62040-3) Capability to handle Step Load 0-100 or 100-0 Transient Recovery mseconds < 0.5 (recovery to 95% of the voltage level) 10 (recovery to 99% of the voltage level)

Condition: good (used), Inert gas welding machine, inert gas device, welding rectifier -without wire feed -Max. welding power: 350 A -Dimensions: 700/600/H1400 mm Codpsb Uhu Rjfx Ab Usra -Weight: 62 kg

Condition: good (used), functionality: fully functional, saw band length: 1,750 mm, saw band width: 16 mm, Bone Saw Mado MKB 649 16A, 380V. Workshop inspected, defects rectified. Motor brake. New saw band. Inspection and test run possible! Additional machines available. Cjdpfjya H U Tex Ab Uera Cash or advance payment! Sale to businesses only. No warranty or guarantee.

Condition: ready for operation (used), Baumüller BUG2-60-30-B-003 built-in rectifier SN:993305921, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Credpfsi D T Hmex Ab Uja

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: H/32059, functionality: fully functional, workpiece height (max.): 50 mm, feed rate X-axis: 22 m/min, TECHNICAL DETAILS Panel height: 10 mm to 50 mm Solid wood: 12 mm PVC/ABS: 0.4 mm to 3 mm Max. feed speed: 22 m/min Min. panel length: 150 mm Min. panel width: 70 mm MACHINE DETAILS Rectifier group motors: 1.5 kW (2 motors) Cjdoydibwspfx Ab Uora EQUIPMENT Touchscreen control for adjusting working units Panel support guide Side roller conveyor with idler wheels for panel support Anti-adhesive unit Roll holder plate COMBIMELT glue unit for hotmelt adhesive with automatic VarioMelt dosing and pre-melter Patented edge pressing unit with segmented pads Trimming unit with 2 motors Cleaning unit with 2 motors Rounding unit Edge scraper unit Working height adjustable electronically via C.N. Powered rubberized conveyor with top pressure

Condition: used, Year of construction: 2021, functionality: fully functional, pressing force: 1,000 t, reverse speed: 60 mm/s, total length: 6,000 mm, total width: 4,750 mm, total height: 7,000 mm, The MV-1000E/NC-SINCRO hydraulic press is custom-designed for the adjustment of progressive dies. It features a tilting upper table and a movable lower table made of C45E steel, machined with DIN-650 T-slots to ensure minimal friction in the vertical movement of the upper table. This is achieved through the installation of maintenance-free bimetallic bushings and perfect parallelism ensured by four high-mechanical-resistance cylindrical columns of 300 mm in diameter, chrome-plated and rectified. STRUCTURE AND TABLES • Features a structure made from oxy-cut steel divided into three electro-welded monoblocks, exclusively manufactured from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed with finite element software. • Cylindrical columns with a diameter of 300 mm, high mechanical resistance, rectified, and chrome-plated to maintain a low friction and wear coefficient. • Upper table with T-slots and anti-fall safety system. • Useful table surface: 4,750 x 2,250 mm. • Structure designed to support 600 TN of concentrated force on 1/3 of its surface. Credpfxowpgwnj Ab Uoa • Lower table designed to support up to 50 TN in displacement, supported by bronze guides with graphite load and mechanical positioning centers for precise table positioning. CYLINDER AND HYDRAULIC GROUP • 6 single-acting cylinders with lapped sleeves, chrome-plated pistons, and anti-wear guides. • Four 50 TN hydraulic compensators located at the ends of the lower table. • 800-liter hydraulic group with a silent Denison pump, automatic disconnection of the fast approach pre-filling speed, and equipped with a decompression system in working speed. • Proportional pressure system and optical gauges for displacement control on the upper table, with a synchro-electronic system for compensating off-center or unbalanced forces. • Hydraulic group cooling system with an independent air-oil radiator unit. • All M series hydraulic presses include a lateral pressure switch to adjust the most suitable pressure setting for each type of work. • Glycerin manometer with tonnage reading. ELECTRICAL INSTALLATION AND SAFETY • Includes a SIEMENS safety PLC model SIMATIC S7 1200 and a 12” touchscreen. Allows programming of semi-automatic and automatic operating modes, power, travel, and upper table dwell time. Capable of storing 300 recipes, with each recipe able to program all the above values. • Low voltage operation via two-hand pushbutton. • Anti-fall safety system with hydraulic safety jaws. • Level IV photoelectric barriers installed at the front and rear. • Lateral protections with opening and safety microswitches. TECHNICAL SPECIFICATIONS Power tn 125 - 1000 Opening Force tn 100 Powered Speeds 1 Engine Power kW 75 Fast Pre-Fill Speed mm/s 100 Variable Working Speed mm/s 12-4 Return Speed mm/s 60 Guide Diameter mm 300 Maximum Pressure Bar 290 Useful Table Area mm 4.750 x 2.200 Lower Table Displacement mm 2.200 Vertical Travel of Upper Table mm 800 Between Columns mm 5.000 x 1.490 Total Front mm 6.000 Total Side mm 4.750 Total Height mm 7.000 Weight kg 150.000

Condition: good (used), Manufacturer: Graul Process: Electrolytic Polishing Process Sequence: E-polishing, multiple rinsing cycles Cycle Time: variable Maximum Load Weight: 50 kg Heating: electric Preheating Time: 3 to 4 hours Polishing Tank Internal dimensions: 970 x 500 x 700 mm External dimensions: 1,170 x 640 x 850 mm Usable dimensions: 770 x 200 x 400 mm Volume capacity: 315 l Heating power: 2.9 kW Rectifier Maximum DC output: 500 A Power consumption: 13.1 kW Dimensions: 490 x 300 x 912 mm Weight: 48 kg Cjdpfx Aboycid No Usra Single Rinsing Tank Internal dimensions: 970 x 500 x 700 mm External dimensions: 1,170 x 640 x 850 mm Volume capacity: 315 l Manual Rinsing Station Internal dimensions: 970 x 600 x 700 mm, open at the front External dimensions: 1,170 x 670 x 850 mm Total connected load: 17 kW Condition: ready for operation

Condition: good (used), functionality: fully functional, overall weight: 4,250 kg, “Steinert UME 110 120 P” for Sale Manufacturer: Steinert Type: UME 110 120 P 6,3 kW / 66,9 A. / 94 V. 100% ED Magnet L x W: 1.206 x 1.150mm Conveyor Belt: 1.200mm (new) AA.: Ca. 2.100mm Weight: 4,25 Tons Cjdpfx Abeu S R Ekj Uera With new transformer rectifier of 380V. Primary.

Condition: good (used), Power: 7,8 kW. Amperage: 52 A. Cedpfx Abog Stwmj Ujra Voltage: 150 V. 100% ED Magnet L x W: 1.780 x 1.380 mm. Conveyor belt: 1.400 mm. AA. : Ca. 2.800 mm. With transformer rectifier of 380V. primary. Overband separator will be overhauled, sandblasted, painted.

Condition: refurbished (used), Manufacturer: Steinert Crjdpewvaidefx Ab Uja Type: UMS 45 70 80/61 3,1 kW / 51 A. / 61 V. 100% ED Magnet L x W: 806 x 750mm. Conveyor Belt: 800mm. (new) AA.: Ca. 1.300mm. Weight: 1.550 KG With new transformer rectifier of 380V. Primary.

Condition: ready for operation (used), Technical characteristics Single column unloader with suction cups. It is suitable for unloading in machining lines requiring machines with reduced dimensions. BODY OF THE MACHINE The machine is composed of a vertical column, a horizontal bracket fixed to the carriage, a carriage fixed to the bracket and a suction cup holder frame unit. The carriage slides on linear guides equipped with ball bearings and is driven by a gear motor controlled by a frequency variator. SUCTION CUPS PANEL COLLECTION GROUP It consists of a suction cups row containing 10 suction cups with bellows to facilitate the separation of the panel. Suction cup diameter of 95 mm. The suction cups are operated by a vacuum pump with a flow rate of 22 m3/h. ELECTRICAL CABINET The machine is equipped with a separate electrical cabinet, managed by a PLC operating logic. PROTECTIONS FOR THE PREVENTION OF WORK ACCIDENTS The machine is protected on all the action perimeter of the suction cups group by protective panels. The battery insertion area is protected by a grid with button opening. DIMENSIONS OF THE WORKABLE PANELS : Length: 320 to 2700 mm Width : 250 to 700 mm Thickness : 12 to 50 mm Maximum weight : 50 kg Pneumatic brake idler roller LOAD TRANSFER IN SINGLE LONGITUDINAL ROW Transfer of introduction with inclined rollers to the left, covered in PVC. The rollers are driven by small belts activated by a gear motor under the control of a speed variator. The transfer is also equipped with a left hand guide adjustable by handwheel. Structure The structure is made of welded steel, reinforced to ensure maximum stability and precision during the operating phases. Work surface The worktop is made up of a transfer in four independent sections. The first section includes : An input transfer with flat belts driven by an asynchronous motor controlled by a frequency converter The second and third sections (drilling planes) each include: A belt transfer with: flat belts driven by asynchronous motor controlled by frequency converter A lateral reference guide, installed on the left side of the machine, with lateral stop function Pneumatic end stops for the positioning of right and left panels A lateral presser guide to guide and clamp panels of different widths against the lateral reference stop. The fourth section includes: a belt transfer for the evacuation of the panels with : flat belts driven by asynchronous motor controlled by frequency checker. Machining center The first center consists of a mobile carriage along the X axis on which two independent drilling heads are installed along the Y and Z axes. Each drilling head is composed as follows: In the X direction, 10 independent vertical chucks In the direction of the Y axis, 9 independent vertical mandrels The second center consists of a mobile carriage along the X axis on which two independent drilling heads are installed along the Y and Z axes. Each drilling head is composed as follows: In the X direction, 10 independent vertical chucks Csdsk Rticopfx Ab Uora In the Y direction, 9 independent vertical spindles. Each operating head is suitable for the installation of an additional operating unit to be chosen as an option Axis movements Precision linear guides with circulating ball bearings and brushless motors for X,Y,Z axes. Rectified helical rack coupled to two pinions to allow the recovery of the play along the X axis. Hardened and ground ball screw (Y,Z axis). Pneumatic balancing device (Z axis) of the drilling unit. Numerical control XNC model bas

Condition: ready for operation (used), Technical characteristics Forward spped 15m/min Digital control CN7000 ISO, IHM Mécanumeric on mobile panel with 15 inch touchscreen, data entry Ethernet link 500 W direct current servo motorization on the 3 axes Guides by rectified prismatic rails and ball bearing shoes Ball screw transmissions on X1, X2, Y and Z axes Protection of the kinematics of the axes by telescopic bellows on the X, Y, Z axes Aluminum bar support plate Digital Z axis 195 mm Cutting head with sealed CO2 ROFIN SINAR laser including laser, unit of control, cooling, mirrors - Maximum power 360 W Aiming laser Equipment compliant with CE directives following recommendations 2006/42 / CE + 2014/30 / UE + 2006/95 / CE and including : Double safety circuit with standardized relay + shock detector buffers on gantry Course d'axe Y1510 mm Course d'axe X3050 mm Course d'axe Z195 mm Power and Motors Voltage: 400 V Pluging: Three-phased Power: 27 Kw Csdpotqkawefx Ab Usra Overall dimensions

Condition: new, Year of construction: 2026, Fully electric mast truck with a capacity of 1,200 kg and a lifting height of 2,500 mm. Its undoubted advantage is the total height of 1830 mm, which allows easy adaptation to any door. Characteristics of the Q12E25 trolley: The fully electric mast truck with a capacity of 1,200 kg and a lifting height of 2,500 mm is a unique solution in the field of storage and transport. Its undoubted advantage is not only its impressive ability to lift heavy loads, but also its exceptionally low total height of only 1,830 mm. Regardless of the type of surface, the mast trolley equipped with polyurethane wheels is perfect for various surfaces. These wheels are extremely durable, abrasion-resistant and guarantee smooth and quiet movement of the stroller. An additional advantage of this stroller is the ability to choose from two driving modes. Thanks to this, the operator can adapt the truck to a specific situation and needs, thus increasing his efficiency and precision of work. Regardless of the conditions and requirements, the mast trolley ensures reliability, safety and comfort of use. A solid structure made of high-quality steel ensures greater stiffness and stability when lifting. The mast truck is also equipped with important safety features. The mast trolley is also equipped with a LED battery charge indicator and a "belly" safety switch that prevents it from colliding with the operator. A sealed, maintenance-free AGM battery and a built-in charger with rectifier ensure convenient use and minimize the need for battery maintenance. Additionally, the speed controller ensures safe driving and speed limits, and the turtle driving mode allows precise maneuvering in tight spaces. Lifting and lowering is done electrically under the operator's full control, ensuring precise and safe operations. We do not require technical inspections during the warranty period. Our mast truck is solidly constructed and performs to a high standard, eliminating the need for regular inspections during this time. We are confident that our product will meet your expectations in terms of reliability, performance and safety. WHEELS AND ROLLERS MADE OF POLYURETHANE Rollers of this type are characterized by high abrasion resistance and increased resistance to mechanical damage. They are universal and work perfectly on various types of surfaces. They generate minimal rolling resistance, which makes maneuvering and moving on the surface easier. Technical parameters MAX LIFTING HEIGHT 2500 mm CAPACITY 1200 kg Codpfx Aorh Eybeb Uera CENTER OF GRAVITY 600 mm FORK LENGTH 1150 mm EXTERNAL FORK WIDTH 550 mm HEIGHT WITH FORKS LOWER 1830 mm HEIGHT OF RAISED MAST 2950 mm HEIGHT OF LOWER FORKS 85 mm TOTAL WIDTH 790 mm TOTAL LENGTH 1800 mm CLEARANCE 30 mm TURNING RADIUS 1390 mm TRAVEL SPEED WITH / WITHOUT LOAD 3.5 / 4.0 km/h LIFTING SPEED WITH/WITHOUT LOAD 100/200 mm/s LOWERING SPEED WITH/UNLOAD 120/100 mm/s HILL CLIMBING ABILITY WITH/UNLOAD 3/10% WORK BRAKE TYPE electromagnetic DRIVE ENGINE POWER 0.75 kW LIFTING SYSTEM MOTOR POWER 2.2 kW BATTERY CAPACITY 12V 85Ah 2 pcs. WHEEL MATERIAL Polyurethane WEIGHT 450 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Bone saw Berkel BS 1750 RN 16A, 380V. In excellent condition. Workshop-tested, defects rectified. Csdpfxox I Efzj Ab Uora Motor brake. New saw band. Year of manufacture: 2009 Viewing and test run are gladly possible by telephone appointment! Additional machines available. Payment by cash or advance payment! Sale to business customers only; no warranty or guarantee.

Condition: new, Year of construction: 2023, functionality: fully functional, color: black, All kinds of new and used generators available. From 7.5 kVA to 2200 kVA and larger. Prices and availability/delivery time on request. Some machines are available directly from stock and in addition, non-stocked ones can be produced on order for you. Options: - single and double bearing - Different SAE/ construction sizes - Single bearing variants: different flanges - Single bearing variants: different couplings - 1 phase/ 3 phase - Different designs - 2/ 4 poles (6 poles on request) - Standard IP23 (higher on request) Prime power (kVA) specified at 50Hz 400V - Available models (other versions can be offered on request) 8.1 kVA, 11 kVA, 13.5 kVA, 16 kVA 12.5 kVA, 15 kVA, 17.5 kVA, 25 kVA 18.8 kVA, 22.5 kVA, 25 kVA, 27.5 kVA, 32 kVA, 37.5 kVA, 42.5 kVA 30 kVA, 35 kVA, 37.5 kVA, 40 kVA 45 kVA, 50 kVA, 60 kVA, 75 kVA, 80 kVA, 85 kVA, 90 kVA 100 kVA, 113 kVA, 125 kVA, 140 kVA, 150 kVA, 163 kVA, 180 kVA, 188 kVA, 200 kVA, 230 kVA, 250 kVA 250 kvA, 300 kVA, 313 kVA, 325 kvA, 350 kVA, 380 kvA, 400 kVA 500 kvA, 550 kVA, 563 kVA, 610 kVA, 625 kVA, 670 kVA 750 kVA, 800 kVA, 915 kVA, 1020 kVA, 1138 kVA, 1250 kVA 1280 kVA, 1420 kVA, 1560 kVA, 1680 kVA, 1905 kVA, 2100 kVA, 2205 kVA For generators >2205 kVA we also offer many options, please inquire without any obligation. Besides delivery of generators we offer many additional service options. Think of: Codpfeq Uk Sbex Ab Ujra - Engineering - Removal and installation of generators - Generator expansion with your desired specs such as a CosPhi controller, heating, PM etc. - Generator parts supply and wide range in stock such as generation fields, voltage regulators (generator AVR's), bearings, rectifiers / diode kits - On-site bearing exchange of your existing generator - Inspection, periodic maintenance, repair, overhaul and rewinding of generators. We can supply generators for all kinds of applications, both new construction and replacement of your existing generator. Besides 400V generators we also supply medium voltage generators and generator - transformer combinations with which all (common) voltages can be achieved. Think of 1kV, 3 kV, 5 kV, 6, 6.3 and 6.6 kV, 7kV, 10 kV, 11 and 11.5 kV, 12 kV, 13 kV, 15 and 15.6 kV, 20 kV, 23 kV, 25 kV, 26 kV solutions. Controllable or non-controllable. Generators for rental generators, generators for emergency power applications, generators for marine purpose and specials with different voltages or special applications. Please contact us for the possibilities. We continuously have used generators in stock.

Year of construction: 2006, condition: good (used), FIN Glue spreader SC2R/1300 with 2 rollers The year 2006 manufacture: FIN s.r.l. Italy main technical specification: Width of working: 1300mm The maximum passage between roller: 120mm The diameter of rollers: 185mm Advancement speed: 19m/min Net weight 390 Kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 200 x 153cm 400 V, 50 Hz, 037 kW Accurate and uniform spreading with any type of glue, excellent technical characteristics, added to the high practicalness, functionality and safety for the operator, place it at the forefront among the 2 roller glue spreaders. Spreading roller covered in antiacid rubber, ground and furrowed, hard wearing, as they are built with a rational layer of rubber it is, therefore, possible to carry out 6-7 grindings. It is easy and quick to disassemble. Spreading, precise and uniform on one or both sides of the panels. Special shock-absorbers, on the roller supports, allow the rollers an automatic opening depth, so as to spread panels of different thickness within 5 mm. they also compensate for eventual parallelism differences of the panel. Uniform glue dosing by a rectified distribution tank, in sheet-iron, with very quick extraction to allow cleaning. Collecting tank, for glue and washing water, in galvanized sheet-iron, extractable for easy cleaning. Safety protections, in sheet metal on the rollers and glue distribution tank, a sheet metal Codjfguntspfx Ab Uera protection prevents the introduction between the rollers of any object more than 5 mm. thick over the transit established, ensuring the maximum safety for the operator. Electrical installation, in a waterproof case with fuses, thermal switch for motor and transformer protection. Control panel, with starting button, stopping button and warning light (24 V). Rollers rotation chain with self-registrable turnbuckle pinion. Roller washing with a bored washing tube, for the water intake during this operation.

Condition: excellent (used), Year of construction: 2006, operating hours: 628 h, functionality: fully functional, Offered is a meat cutter - sausage cutter from K+G Wetter Cutmix 50L. Type: STL, 50L. Year built: 2006. 628 operating hours. Knife shaft variable speed from 50 to 5000 rpm. Bowl with 2 speeds. Voltage: 380V, 36A, 24 kW. The machine is made entirely of V2A stainless steel. Crsdpfx Aew R Tt Dob Uja Mixing mode forwards and backwards, continuously adjustable. The machine has been workshop tested, defects have been rectified, fully functional. 6-knife head, ready to use. Payment in cash or by advance payment only! Sale only to businesses, no guarantee, no warranty. Further details upon request.

Condition: used, mileage: 265,299 km, power: 302 kW (410.61 HP), first registration: 11/2020, fuel type: gas, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, SCANIA R410 N323 Natural gas retarder * EZ:11.11.2020 * km: approx. 265,289 * R410 * Type:N323 * Automatic * 12742 cubic capacity * Accident damage as shown in the pictures * Retarder * Deutscher LKW / German truck / Niemiecka ci??arówka * 1 Fahrzeughalter / 1 Car owner * 302 KW * 2xbeds * Rear silencer 600 mm * Chassis width 2550 mm * Frame thickness F 800 * Refrigerator * Air conditioning * LNG tank 352 liters & 406 liters * Rain sensor * Wheel formula 4x2 * Suspension leaf / air * ESP * FFU Orlaco camera system * Premium driver's seat * Auxiliary heating * EURO 6 * As you can see in the pictures, the vehicle is damaged. * We can help with loading on the trailer. We can help with loading on the trailer. Mo?emy pomóc w za?adunku. * All information without guarantee * Further information and criteria on ätzliche Service Leistungen / Additional service * Umlackierungen, Nachrüstungen möglich / repainting, retrofitting possible * Kurzzeitkennzeichen / Zollkennzeichen / License plate * Überführung und Verschiffung möglich / Transfer and shipment possible * Hilfe bei Zoll und Export Dokumenten / Help with customs and export documents * Besorgung von COC und EUR Dokumenten / Procurement of COC and EUR documents * Seit 1991 auf dem Markt / Since 1991 on the market * Leasing und Finanzierung möglich / Leasing and financing possible * Eigene Werkstatt / own workshop Crjdpfxoruzyks Ab Uea * Mówimy po polsku. * We speak english. * Goworim po russki * The repainting in your desired color is possible in our company at a reasonable price and in good quality. The repainting in your desired color is possible in our house at a reasonable price and in good quality. * Are you further away and have no opportunity or time to inspect and test a truck at our premises? No problem, you are welcome to appoint an independent expert of your choice to inspect the truck technically and visually. If, contrary to expectations, a defect should occur, we can rectify the defect quickly and effectively in our workshop. We can also deliver your new used truck anywhere in Europe for an additional charge. You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: used, maximum load weight: 27,290 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2020, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,853 mm, Equipment: ABS, SDS390 101m³ X-TRA Long moving floor lift axle SAF* Deutscher Anhänger / German Semitrailer * 101m³ X-TRA Long model * SAF axles * Lift axle * Disc brakes / Discbrakes * Floor Sliding floor with rear wear plate made of V2A sheet metal, aluminum floor boards, 8 mm floor profile, ribbed design, aluminum end caps* Tires: 385/55 R 22.5 1st axle 9/9 mm, 2nd axle 12/10 mm, 3rd axle 11/9 mm * Empty weight: 7,710 kg Codpferwvl Tox Ab Uora * Permissible total weight: 35,000 kg * Payload / Working load: 27,290 kg * Air suspension * All data without guarantee * Further information and criteria on request. * Additional service Leistungen / Additional service * Umlackierungen, Nachrüstungen möglich / repainting, retrofitting possible * Kurzzeitkennzeichen / Zollkennzeichen / License plate * Überführung und Verschiffung möglich / Transfer and shipment possible * Hilfe bei Zoll und Export Dokumenten / Help with customs and export documents * Besorgung von COC und EUR Dokumenten / Procurement of COC and EUR documents * Seit 1991 auf dem Markt / Since 1991 on the market * Leasing and financing possible. We have been working with various leasing companies for many years and can therefore find the optimum financing for every customer. We can also often support customers with poor credit ratings and put them in touch with good leasing partners. * Own workshop / own workshop * Mówimy po polsku. * We speak english. * Goworim po russki * The repainting in your desired color is possible in our company at a reasonable price and in good quality. The repainting in your desired color is possible in our house at a reasonable price and in good quality. * Are you further away and have no opportunity or time to inspect and test a truck at our premises? No problem, you are welcome to appoint an independent expert of your choice to inspect the truck technically and visually. If, contrary to expectations, a defect should occur, we can rectify the defect quickly and effectively in our workshop. We can also deliver your new used truck anywhere in Europe for an additional charge. You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: used, mileage: 326,407 km, power: 220 kW (299.12 HP), first registration: 05/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: silver, gearing type: automatic, emission class: euro6, loading space length: 7,980 mm, loading space width: 2,470 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, Mercedes * Antos 1830 * Carrier Easycold Supra 1250 Mt * Auxiliary heating * Radio * Air conditioning * 3 compartments / areas that can be locked * Polarus refrigerated box body K 50 V * Length body 8.2 m * Load compartment length: 7.98 m * Load compartment height: 2.2 m * Load compartment width: 2.47 m * Palfinger tail lift with 2,000 kg load capacity * New HU/SP before sale * German truck / German Truck * Unladen weight: 11,300 kg * Permissible total weight: 18,000 kg * Maximum payload: 6,700 kg * All information without guarantee * The HU/SP will be renewed before the sale. * Further information and criteria on ätzliche Service Leistungen / Additional service * Umlackierungen, Nachrüstungen möglich / repainting, retrofitting possible * Kurzzeitkennzeichen / Zollkennzeichen / License plate * Überführung und Verschiffung möglich / Transfer and shipment possible * Hilfe bei Zoll und Export Dokumenten / Help with customs and export documents * Besorgung von COC und EUR Dokumenten / Procurement of COC and EUR documents * Seit 1991 auf dem Markt / Since 1991 on the market * Leasing and financing possible. We have been working with various leasing companies for many years and can therefore find the optimum financing for every customer. We can also often support customers with poor credit ratings and put them in touch with good leasing partners. * Own workshop / own workshop * Mówimy po polsku. * We speak english. * Goworim po russki * The repainting in your desired color is possible in our company at a reasonable price and in good quality. The repainting in your desired color is possible in our house at a reasonable price and in good quality. Crsdpfx Aenfwxnsb Usa * Are you further away and have no opportunity or time to inspect and test a truck at our premises? No problem, you are welcome to appoint an independent expert of your choice to inspect the truck technically and visually. If, contrary to expectations, a defect should occur, we can rectify the defect quickly and effectively in our workshop. We can also deliver your new used truck anywhere in Europe for an additional charge. You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: used, mileage: 273,415 km, power: 350 kW (475.87 HP), first registration: 05/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Equipment: Navigation system * Secondary water retarder * Wheelbase 3700 mm * Front axle with air suspension / Air suspension front * Air suspension, rear axle, lowliner / Air suspension rear * Front and rear disc brakes / disc brakes * Comfort driver's seat * Comfort passenger seat * Mattress, PremiumComfort, bottom * German Truck / Deutscher LKW * Electric sliding/tilting roof, glass version * L-cab BigSpace, 2.50 m, level floor * Cab suspension, comfort, steel-sprung * Locking system, with central locking * Light sensor * Rain sensor * 315/60 R 22.5 VA/VLA/NLA tires * Tubeless tires, 295/55 R 22.5 HA * Navigation system * Axle load measuring device * Multimedia cockpit, interactive * Second tank 330 l, right, 650 x 565 x 1050 mm, aluminum * Tank 660l+75lAdBlue,left,735x565x2200 Alu,step-up * LED daytime running lights * Automatic high/low beam and cornering light * Engine OM471, R6, 12.8 l, 350 kW (476 hp), 2300 Nm * High Performance Engine Brake * Lane Keeping Assist * Distance Assist * Attention Assist * Traffic Sign Assist * Turn Assist * Active Brake Assist 5 Crodpfxek Amxfs Ab Uea * All information without guarantee. * Further information and criteria on ätzliche Service Leistungen / Additional service * Umlackierungen, Nachrüstungen möglich / repainting, retrofitting possible * Kurzzeitkennzeichen / Zollkennzeichen / License plate * Überführung und Verschiffung möglich / Transfer and shipment possible * Hilfe bei Zoll und Export Dokumenten / Help with customs and export documents * Besorgung von COC und EUR Dokumenten / Procurement of COC and EUR documents * Seit 1991 auf dem Markt / Since 1991 on the market * Leasing and financing possible. We have been working with various leasing companies for many years and can therefore find the optimum financing for every customer. We can also often support customers with poor credit ratings and put them in touch with good leasing partners. * Own workshop / own workshop * Mówimy po polsku. * We speak english. * Goworim po russki * The repainting in your desired color is possible in our company at a reasonable price and in good quality. The repainting in your desired color is possible in our house at a reasonable price and in good quality. * Are you further away and don't have the opportunity or time to inspect and test a truck at our premises? No problem, you are welcome to appoint an independent expert of your choice to inspect the truck technically and visually. If, contrary to expectations, a defect should occur, we can rectify the defect quickly and effectively in our workshop. We can also deliver your new used truck anywhere in Europe for an additional charge. You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: used, mileage: 98,327 km, power: 115 kW (156.36 HP), first registration: 11/2019, fuel type: diesel, overall weight: 7,490 kg, color: red, gearing type: mechanical, emission class: euro6, loading space length: 6,100 mm, loading space width: 2,500 mm, loading space height: 2,080 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, tail-lift, Atego 816 air conditioning box * Air conditioning * Cruise control * Box body * Bär Cargolift tail lift Load capacity 1000 kg * Wheelbase: 4220 mm * Engine 5.1 liter - 115 kW diesel (OM 934) * German Truck / Deutscher LKW * 1 Fahrzeughalter / 1 Car owner * Driving assistance system: Brake assist (Active Brake-Assist) * Driving assistance system: Lane departure warning system * Driving assistance system: Stability control assistant * Exhaust emission standard: 6 * Cab: S ClassicSpace * Adblue tank 35 l * Diesel tank 120 l * Immobilizer * Unladen weight: 5715 kg * Tires: 215/75 R 17.5 front 6/6 mm * Rear/back 215/75 R 17.5 7/7/7/7 mm * Sell box body * Loading space length: 6.1 m * Loading space height: 2.08 m * Loading space width: 2.5 m * Before the sale, the HU/SP "TÜV" will be renewed at our expense * All information without guarantee * Further information and criteria on ätzliche Service Leistungen / Additional service * Umlackierungen, Nachrüstungen möglich / repainting, retrofitting possible Cedpfx Aom Tqhwjb Ujra * Kurzzeitkennzeichen / Zollkennzeichen / License plate * Überführung und Verschiffung möglich / Transfer and shipment possible * Hilfe bei Zoll und Export Dokumenten / Help with customs and export documents * Besorgung von COC und EUR Dokumenten / Procurement of COC and EUR documents * Seit 1991 auf dem Markt / Since 1991 on the market * Leasing and financing possible. We have been working with various leasing companies for many years and can therefore find the optimum financing for every customer. We can also often support customers with poor credit ratings and put them in touch with good leasing partners. * Own workshop / own workshop * Mówimy po polsku. * We speak english. * Goworim po russki. * The repainting in your desired color is possible in our company at a reasonable price and in good quality. The repainting in your desired color is possible in our house at a reasonable price and in good quality. * Are you further away and don't have the opportunity or time to inspect and test a truck at our premises? No problem, you are welcome to appoint an independent expert of your choice to inspect the truck technically and visually. If, contrary to expectations, a defect should occur, we can rectify the defect quickly and effectively in our workshop. We can also deliver your new used truck anywhere in Europe for an additional charge. You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: new, Year of construction: 2022, functionality: fully functional, overall weight: 37 kg, hollow shaft diameter: 40 mm, 3 units available, price per unit! Speed [r/min]: 1415 / 19 Total gear ratio [i]: 72.98 / infinite Max torque Ma [Nm]: 600 Output torque [Nm]: 182 SEW service factor: 3.30 Mounting position IM: M6 Terminal box position [°]/cable entry: 270 (top) / standard Lubricant / quantity [l]: CLP 220 mineral oil / 2.40 Paint finish: Top coat RAL7031 - Blue grey Gearbox: FH57/G Hollow shaft: 40mm Design type: Hollow shaft with shrink disc Additional general features: G rubber buffer Documentation No. A: 26865343, 26883392 Parts list: 422511499 Credpfxewy Umrj Ab Uoa Motor: DRN71M4/BE05/IS/TF/AK8W Motor power [kW]: 0.37 Motor frequency [Hz]: 50 Duty cycle S1-S10: S1 Motor voltage [V] / connection type: 230/400 delta/star Rated current [A]: 1.78 / 1.02 cos phi: 0.66 Connector circuit diagram: R81 / 680790306 Thermal class [°C]/protection type [IP]: 155(F) / 54 International efficiency class: IE3 Efficiency at 50/75/100% rated load [%]: 74.3 / 77.3 / 77.3 CE marking: Yes IS version: Complete connector Primary connector: IS = integrated connector Primary connector, electrical interface: 6 winding ends customer side; 3-wire supply with swap terminal bridge Primary connector, code: 01IB Brake: BE05 Brake voltage [V]/torque [Nm]: 230 AC / 5 Brake rectifier: BMK1.5 Brake circuit diagram: B121 / 690090206 Fan hood: Metal fan cover Motor protection: TF = PTC thermistor Encoder: AK8W / shaft-centered, friction-locked mounting via tapered shaft Electrical interface: asynchronous, serial RS485 Incremental value: 2048 Absolute value: Singleturn 16 bit + multiturn 16 bit Encoder connection: Integrated encoder connector on encoder cover with terminal lid, no thermal motor monitoring, A1GA Encoder-IS position/cable entry: 270 (top) / standard Encoder version: Supply voltage DC 7-30V Encoder circuit diagram no.: 681810208 Encoder code 1: 03AA20AN60AC Technical data sheet encoder: 63297795 Terminal box lid: IS terminal box cover made of aluminum with threaded holes 1xM25, 1xM12, 1xM20 Documentation No. A: 25957066, 26857987, 26864274 Nameplate: German 1st nameplate set / position: 0° Nameplate language (2nd set): German 2nd nameplate set / position: Supplied loose in plastic bag Operating manual language/quantity: German / 0 Parts list/language/quantity: German / 0 Customs tariff number: 85015100

Condition: ready for operation (used), BAUMÜLLER BUH2-90/90-62-102-00 Power converter unit, inverter/rectifier good condition tested traces of storage storage find like pictures For further technical information please refer to the pictures Scope of delivery as shown Auction price includes 19% VAT and invoice Shipping/collection by arrangement Express shipping also possible worldwide / Worldwide express-shipping possible. No guarantee / warranty Crjdpfetrlt Eex Ab Uoa Due to the new warranty law we are obliged to inform you of the following: Even if the goods are new or used, we sell the goods as spare parts without warranty as we often deal with used products from dismantling or insolvency goods, a warranty within the legal framework is not possible for us. Trading between traders is one way of excluding the statutory guarantee or warranty. If you have any questions, just write to us. No. B6491