Used Reduce for sale (2,495)

Condition: new, Year of construction: 2022, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Bedpfshwhfqex Aglscu Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: good (used), Year of construction: 2015, machine/vehicle number: 190630, turning length: 150 mm, turning diameter: 200 mm, spindle bore: 42 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 155 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, turning diameter over bed slide: 220 mm, overall weight: 5,000 kg, spindle nose: 140 Flat, bar diameter (max.): 51 mm, power: 0.015 kW (0.02 HP), The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loader (OGL) into the production line, parts can be loaded and unloaded automatically. An extremely compact footprint improves floor space utilization, while the popular dual spindle option significantly reduces cycle time. Bcsdpertrlzsfx Aglsu Equipped with: Okuma OSP-P300L CNC Control 8" 3-Jaw Chuck Expanding Mandrel Turret Tooling Gantry Loader Pendant Controller Chip Auger Stack Light

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BCOR12150, BIESSE BREMA EKO 902 CNC and vertical dowel insertion machine for reduced cycle times Equipment Features - Clamping grippers measure the thickness to adjust drilling depth - Laser-based measuring system for detecting the front and rear panel edges - Length tolerance compensation correcting the workpiece length in X - 5-position tool changer - Drilling head with individually retractable spindles and grooving saw - Diameter: 120 mm - Gluing and dowel insertion units mounted on Y and Z axes Options - 4.5 kW electrospindle; 18,000 rpm - Special drilling unit for hinges Technical Data - Panel length: 160 - 3200 mm Bsdpfx Asw Nytnsglecu - Panel width: 35 - 900 mm - Panel thickness: 8 - 80 mm - X/Y/Z axis speed: 100 / 60 / 30 m/min - X axis travel: 3200 mm - Y axis travel: 900 mm - Main spindle power: 4.5 kW - Number of controlled axes: 3 axes - Number of drilling spindles: 20 - Number of tool positions: 5

Condition: new, Year of construction: 2025, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation Bcsdohwrgtjpfx Aglju The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3000*1524mm Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Cutting Speed: 0-100m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Bcjdpfxjhv Hkao Aglsu Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 0-40000mm/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cutting Thickness: 0-30mm CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Bodpfx Agshwhf Ajlocu Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, functionality: fully functional, power: 80.9 kW (109.99 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 8,000 kg, empty load weight: 8,000 kg, operation weight: 8,000 kg, maximum load weight: 2,500 kg, lifting power: 2,500 kg/m, lifting height: 2,800 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2025, Excavator Loader GG30BC Excavator Loader The GG30BC excavator loader is a robust and reliable machine designed for construction and industrial applications. With a loading capacity of 2,500 kg and an operating weight of 8,000 kg, this machine delivers outstanding stability and efficiency. The loader bucket, with a width of 2,200 mm and a capacity of 1.3 m³, ensures fast and effective loading. Engine and Drive System The machine is equipped with a modern YUCHAI YCF36110-S500 engine (81 kW). The mechanical transmission with fixed drive axle features 2 forward and 2 reverse gears, providing optimal control of the vehicle. The maximum travel speed is 24 km/h, enabling efficient transportation around the jobsite. Hydraulics and Brake System The advanced hydraulic system operates at a pressure of 22 MPa and delivers a digging force of 46.5 kN for the grab and 31 kN for the bucket. The standard digging depth is 4,000 mm, extendable to 5,500 mm with an optional telescopic arm. The machine is fitted with a pneumatic-hydraulic braking system including an emergency stop function, significantly enhancing operational safety. Working Range and Dimensions The GG30BC provides a dump height of 2,800 mm, a reach of 1,062 mm, and a swing angle of 190°. The maximum tractive force is 39 kN, and the breakout force is 38 kN. A minimum ground clearance of 300 mm ensures excellent performance on challenging terrain. The machine dimensions are 7,600 × 2,260 × 2,890 mm, with a turning radius of 6,581 mm at a steering angle of ±36°. Engine model: Euro 5 YUCHAI ENGINE-YCF36110-S500 Rated power: 81 kW (110 hp) Operating weight: 8,000 kg Loading capacity: 2,500 kg Transmission type: Mechanical transmission with fixed power drive Gears: 2 forward / 2 reverse Maximum speed: 24 km/h Tyres: (F) 14-17.5 (R) 19.5L-24 Steering brand: FEICHENG YUNYU Steering system working pressure: 12 Pa Front tyre pressure: 0.22 MPa Main transmission type: Reduction Final drive: Single-stage final reducer Brake system control: Pneumatic brake clamp over oil, external, self-regulating, self-balancing Hydraulic system pressure: 22 MPa Digging force (grab): 46.5 kN Digging force (bucket): 31 kN Brake type: Self-levelling Emergency brake control: Manual – parking brake with end force Bucket capacity: 1.3 m³ Bucket width: 2,200 mm Dipper bucket capacity: 620 mm Loader dump height: 2,800 mm Loader dump reach: 1,062 mm Maximum digging depth: 4,000 mm Optional digging depth: 5,000–5,500 mm (with telescopic arm) Minimum turning radius: 6,581 mm Digging arm swing angle: 190° Maximum tractive force: 39 kN Breakout force: 38 kN Bodpfxjxr Ru Hj Aglscu Minimum ground clearance: 300 mm Wheelbase: 2,250 mm Steering angle: ±36° Working pressure: 12 MPa Length: 7,600 mm Width: 2,260 mm Height: 2,890 mm

Condition: like new (used), functionality: fully functional, Year of construction: 2016, operating hours: 100 h, control type: CNC control, controller manufacturer: CADMAN TOUCH, bending force (max.): 1,600 t, working width: 12,000 mm, stroke length: 800 mm, distance between stands: 10,600 mm, operating speed: 9 mm/s, number of axes: 15, back gauge: 1,000 mm, Only 100 Working (table/guiders/tooling still in prohibitor) Installed never used in production only testing CNC T1 + T2 + T3 Bending help support arm in front 3 x HH 2600 Module backgauge 3 x Z1+R1+Delta1 Lower Tooling set Variable VLA 50-150 mm Upper Tooling set LVD 505; Adjustment V-Axis 59,3 to 249,3 mm Thermotec Oil chiller GC25T-35 max. 2200 kPa CADMAN TOUCH with the best software for pressbrakes Hydraulic top tool clamping Table width 500 mm Troath in column 1000 mm Max. bending length: 12000mm Distance between column: 10600mm Max. pressing force: 1600T Dis. Beam - Table: 1070mm Beam stroke: 800mm Table Width: 500mm Troth beam: 1000mm Approch speed: 80mm/min. Working speed: 9mm/min. Return speed: 90mm/min. Adjustment X-Axis back gauge:600mm Number of controlled axis: 15 (Y1/Y2/X/Z1/2/3, R1/2/3, Delta 1/2/3, T1/2/3 Control: CADMAN TOUCH Crowning: Yes Hydraulic toolclamping: Yes Power: 125kW Length: 14875mm Width: 5430mm Height: 7906mm Weight: 277500kg Why you need 1600 Ton Pressbrake, Bending force depends on: Material thickness Material strength Bend length Die opening When any of those go big, tonnage skyrockets. A 1600-ton press brake is used when: Plate is thick (20–60+ mm / ¾"–2½"+) Bcodpfx Aoygkuwoglju Material is high-strength Parts are long (6–10+ meters / 20–30+ ft) Tight radii or deep bends are required Forming Heavy Welded structures like: Bridge girders Box columns Large beams and stiffeners Base frames for industrial machinery Shipbuilding Defence & Naval like: Hull sections Deck plates Bulkheads Reinforcement ribs Enegery & Infrastructure like: Wind tower sections Power plant components Pressure vessel shells (pre-forming) Transformer tanks Heavy Machining & Ground & Mining jobs like: Excavator frames Crusher housings Dump truck bodies Mining chute liners Furnace housings Kilns Massive welded assemblies Material to bend on 1600 t machine: Carbon steel: S235 / S275 / S355 A36, A572 Plate thickness: ~20–50 mm+ High strength steel S690 / S700 Hardox, Strenx Much higher tonnage needed even at thinner gauges Stainles steel: 304 / 316 Needs ~1.5–2× the force of mild steel Wear-resistant plate Heat-resistant steels JOB Example: Bending 40 mm S355 steel over 8 meters can easily require 1,200–1,600 tons, depending on tooling. Bending instead of welding: Increases strength Reduces distortion Cuts weld time and cost Improves fatigue life Looks cleaner and more accurate A 1600-ton press brake is used when: The part is too thick Too strong Too long It’s not for sheet metal shops — it’s for heavy industry, shipyards, steel fabricators, and energy projects. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, new ! all stainless steel 2 speeds 2 mixing directions 1,8 kW – 2,5 kW safety lid Suitable for loader with “Easy Connect” Easy clean Hinged safety gard CE-approved overall dimensions (l x w x h) : 1.676 x 830 x 1.428 mm (open lid: H: 1.985 mm) The Barmix 180 litre twin shaft paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood the mixer is ideal for mixing many products that are free flowing and easy to move around. The Barmix 180 features a special paddle shaft arrangement with one slightly higher than the other to give a more effective and quality mix. Bjdpfxjyfd Rce Aglecu The effective mixing action with high peripheral wing speed gives good protein extraction and uniformed distribution of spices, additives and liquids. Also the Barmix 180 Litre Mixer produces a gentle mixing action which reduces particulate destruction maintaining the product structure and its original quality.

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: IRB2600ID-8/2.0 IRC5, load capacity: 8 kg, arm reach: 2,000 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, Equipment: documentation/manual, IRS Robotics® Refurbished Industrial Robot. 100% complete and fully operational: robot arm, controller, all cabling, and teach pendant included. Supplied with our warranty and a comprehensive 77-Point Protocol inspection carried out by our in-house robotics engineers. Brand: ABB Model: IRB2600ID-8/2.0 Controller: IRC5 Payload: 8 kg Bcjdoyftqxspfx Agleu Reach: 2 m General purpose: This robot offers a unique combination of high payload capacity, extensive working range, and Integrated Dressing (ID), which routes all cables and hoses internally through the robot’s upper arm and wrist. These features can reduce cycle times by up to 15%, significantly boosting production output across various applications. Mounting options: Floor, wall, shelf, angled, or inverted. Robot weight: Approx. 276 kg IRS Robotics® Refurbished: • 77-Point Protocol – comprehensive testing on our dedicated benches, new oil/grease, new batteries, thoroughly cleaned, and finished in your preferred RAL colour. • Includes Accuracy Status Measurements (repeatability, precision, backlash measurement) About Us: We are trusted specialists in the daily supply of refurbished A-brand robots: ABB, KUKA, and YASKAWA. Established in 2002. Worldwide shipping available.

Condition: new, The SBS 235, a versatile Horizontal Mitre Cutting Bandsaw from KNUTH, is designed for semi-automatic operations in industrial settings. This compact machine features a rigid vise with a lateral slide and a cast-iron saw frame that swivels up to 60° right and 45° left, enabling efficient cutting of various workpiece dimensions. The powerful motor ensures continuous operation, while the bi-metallic saw blade provides stability for heavy machining tasks. Equipped with an advanced coolant system and mechanical quick-action clamping, the SBS 235 streamlines your workflow, reducing downtime and enhancing productivity. Users will appreciate the easy manual feed for precise handling and the quiet operation during use. With capabilities to cut round pieces up to 225 mm and flat pieces measuring 150x245 mm, this Horizontal Mitre Cutting Bandsaw is perfect for small batches. Request a quote today for the SBS 235 and elevate your cutting operations! Bcedpfeuxdfyex Aglou

Condition: excellent (used), manufacturer: GRÜN SYSTEMTECHNIK WETZLER including case We offer an original ATC measuring microscope, originally taken from a TRAUB TNA turning center. The unit is designed for installation in the automatic tool changer and can be used on various CNC machines with a suitable toolholder interface (size comparable to TRAUB TNA400 Key Features & Benefits: • Universal application: Suitable for any CNC machine with compatible toolholder interface. Bsdpfx Agjyf H Dlolscu • Fast tool setup: Enables direct measurement of cutting edges, tool lengths, and radii inside the machine. • Process reliability: Tool wear can be identified immediately and corrected without removing the tool. • Precise referencing: Useful for checking zero points, bores, and fixtures directly in the setup. • Time savings: Eliminates the need for external presetting devices and reduces downtime. • Compact & robust design: Easy to integrate and operate within the tool changer system. This ATC measuring microscope turns your CNC machine into a precise measuring station, helping you achieve higher accuracy, shorter setup times, and improved process reliability.

Condition: used, machine/vehicle number: 16072, Fotodirekte Offset-Druckplattenkamera - Plate Exposer Heidelberg QUICKPLATER 40 Foliendicke / Foil thickness 0,1 - 0,2 mm Folienstanzfunktion (nur Langformat) / Foil Punch System (only lengthways format): Heidelberg Quickmaster 46, d. h. zwei U-förmige Löcher mit einem Abstand von 220 mm symmetrisch zur Mitte der Folienvorderkante Folienformate / Foil Size: Querformat / landscape format max. 404 x 510mm Langformat / Long Size: max. 350 x 510mm Querformat / landscape format min. 222 x 250mm Bcjdpfxjh Axk Ij Aglsu Vorlagenformat / Template format max. Bei Verkleinerung auf / when reduced to 70,7 %: 440 x 614mm Bei Verkleinerung auf / when reduced to 64 %: 448 x 575mm Motivformat auf der Folie / Motiv format on Foil max.: 1:1 Querformat / landscape format: 350 x 505mm 1:1, gestanztes Langformat / punchd long size: 350 x 480mm 1:1, ungestanztes Langformat / not punch long size: 350 x 469mm 70,7 %, Lang/Querformat / Long/landscape format: 311 x 434mm 64 %, Lang/Querformat: Long/landscape format:287 x 370mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2015, condition: ready for operation (used), This TRUMPF STOPA LiftMasterCompact was manufactured in 2015. It is a robust automation system designed for efficient material handling and storage. Ideal for streamlining operations in various industrial environments. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits • The liftmaster compact was developed for the automatic loading and unloading of sheets in laser cutting and punching machines to increase productivity and efficiency in metal processing. • Offers a space-saving design, enabling efficient operation in smaller facilities while maintaining high performance. • Robust construction ensures reliability and durability, making it the ideal choice for optimizing workflows and reducing manual material handling. Technical Machine Benefits • Max. Sheet size: 4000x2000 mm • Min. Sheet size: 1000x1000 mm (loading), 150x150 mm (unloading) • Max. Sheet thickness: 25 mm (loading), 20 mm (unloading) Bsdpfx Aex D Ibujglscu • Max. Sheet weight: 1600 kg (loading), 1260 kg (unloading) • Max. Loading weight: 5000 kg • Permissible load [kg] 5,000/maximum storage height [m] loading height(mm) 4. 3 / 90/maximum lifting speed [m/min] 30/pulling speed [m/min] 25/travel speed [m/min] 100/transport trolley (rgb) travel speed [m/min] 12 • Steel construction (l x w x h) (m) 31. 8 x 7x 4. 3/storage locations 134/storage capacity (t) 670 Dimensions Machine Depth 4040 mm

Condition: used, Year of construction: 2017, filter area: 9.5 m², negative pressure: 2,200 Pa, total height: 2,200 mm, total width: 1,000 mm, total length: 1,800 mm, volume flow: 1,593 m³/h, overall weight: 350 kg, nominal flow rate: 1,447 m³/h, input voltage: 400 V, suction capacity: 1,593 m³/h, space requirement length: 1,800 mm, space requirement width: 1,000 mm, space requirement height: 2,200 mm, power: 2.2 kW (2.99 HP), nominal power: 2.2 kW (2.99 HP), transport width: 1,000 mm, transport length: 1,800 mm, tank capacity: 240 l, transport height: 2,200 mm, No. 04517 Mobile extraction unit / mobile dust extractor Schuko Vacomat 140/160 XPe Unused, year of construction 2017, in new condition Extraction diameter 140 / 160 mm, can be changed using a reducer Bcedpjygbbhefx Aglju Residual dust value H3, 0.1 mg/m3 Suitable for extracting combustible dusts The Vacomat 140/160 XPe mobile dust extractor is ideal for single machine extraction. Air volumes of up to 1593 m3/h can be conveyed with this extraction system using the vacuum method, e.g. for dedusting sliding table saws, jointers or thicknessers. The dust/chip mixture is discharged into a dust-tight chip collection container (240 l) with an inserted plastic bag. A vacuum channel holds the plastic bag securely in the collection container. Viewing windows make it easier to check the fill level. The Vacomat 140/160 XPe mobile dust extractor automatically monitors its extraction performance via a pressure cell and guarantees maximum operational safety. In the Vacomat 140/160 XPe, a vibrating motor cleans the filter bags electro-mechanically. No connection to compressed air and therefore no compressor is required. It can be controlled via the query of the woodworking machine using potential-free contacts. The Vacomat 140/160 XPe mobile dust extractor is fitted with patented SchukoCone filter bags as standard. The SchukoCone filter bags are particularly suitable for fine dusts. Nominal volume flow 1447 m3/h Vacuum pressure 2200 Pa Motor power 400 V, 2.2 kW Filter area 9.5 m2 Filter material dust class “M” CE-compliant GS-tested Complete technical documentation available Transport dimensions approx. 1800 x 1000 x 2200 mm LWH Weight approx. 350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2009, Dimensions (L/W/H) mm Bcedpfxou Sbkas Aglsu Filter capacity 14 m² Number of filters St. Dimensions (L/W/H) mm engine output 5,5 kW 0 2.800 m³/h low pressure 5.000 Pa suitable for dust removal from graphite and metals electromotive filter cleaning including mechanical filter unit ME-FI 2000 Manufacturer W+W Filtersysteme The suction fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum.

Condition: used, Year of construction: 2017, Overview  The Tecnoimpianti MINI STAB 300 SINGLE is a compact system for the acid stabilization of must and wine using the ion exchange process. It was built in 2017 by the Italian manufacturer Tecnoimpianti Water Treatment S.r.l. and was rarely used by the original owner and is now being sold due to a change of ownership. The machine is therefore in very good condition and available immediately. It is ideal for wineries, breweries or the production of carbonated beverages. Technical details Capacity: approx. 300 l/h Area of application: Acidification / stabilization of must and wine Process: Ion exchange with strongly acidic cation exchange resin Compressed air requirement: min. 6 bar Power supply: 400 V / 3 Ph + N / 50-60 Hz Installed power: 3.2 kW Operation: Touchscreen HMI Protection class: IP65 Compressor tank: 400 L, 3 bar operating pressure Certification: EU-compliant / CE Special features Fully automated process control Precise pressure and temperature control Stainless steel construction (hygienic & durable) Plug-and-play system with touchscreen Built-in nitrogen feed Effectively reduces potassium bitartrate formation Bcedpfx Agjwm Rfkslsu

Condition: used, Year of construction: 2021, Overview The filling line was manufactured in 2021 by the German company ALWID. The filling line is new and can fill  chemical products into plastic containers. With the exception of the bottle feeder and Posimat, glass bottles can also be processed. Due to ATEX certification, explosive products can be processed with the line. The equipment comes with a 2-year warranty (in single-shift operation) and all components of the equipment can be purchased separately.  Technical details Capacity: 9000 containers/h (varies according to bottle volume and product).  Container  Max. Diameter: 100mm  Max. Height: 300mm  Control Siemens S7 Single machines  Bottle Hopper | ALWID | POSIMAT-ACCESS-N15  Bottle feeder with hopper 2000 l, in stainless steel, chassis and supports in mild steel painted Positronic control system for optimal adaptation to downstream filler Machine, completely internally wired with attached control cabinet in mild steel, painted Machine according to CE guidelines; i.e. max. noise level of ≤ 80 dB +/- 2 Combined filling and closing machine (block machine) | ALWID | SUPERIOR-16MDM-5SK Fully automatic rotary filler Filling system: mass flowmeter system, type: Endress+Hauser LPG MASS Number of filling stations: 16 filling stations Filling valve diameter: Ø12mm Max. tank dimensions: height: 50-300 mm, Ø: 20-100 mm Fully automatic round capper Number of capping heads: 5 With torque adjustment via slip clutches With fully automatic cap sorting and cap feeding via BONINO disc sorter with elevator With inside drop switch to switch off the machine in case of missing closures Checkweigher | ALWID | OCS-HC-M-2000-1 Applied safety and machinery directives CE compliant Industrial load cell with stainless steel housing based on the principle of electromagnetic force compensation Force shunt free current transfer at the load cell Front protection to reduce interference on the weighing result Stainless steel control cabinet Graphics-capable color TFT touch screen, 10.4 inch, VGA resolution Flexible operability due to tiltable stainless steel operator terminal Freely configurable user interface with simple, intuitive operation Inkjet Printer | Domino | Ax350i  Fast printing of text and multi-line codes at high speeds  Labeler | ALWID | SES-120-III Tandem design Max. Label height: 120mm  Photocell for label scanning 2 x automatic winding station incl. counter pressure plate Mounting device with height adjustment for lateral label dispensers With adjustable side guides - passage width up to 150mm Bcodpfx Ajmfqm Dsglsu

Condition: used, Year of construction: 2010, Overview  This rotary cold-glue labelling machine was manufactured in 2010 by the Spanish company Auxiemba. The model BASIC 600-10-CF-I-DR is designed for applying paper or polypropylene labels onto cylindrical glass bottles using cold-glue technology. It is equipped with formats for 330 ml, 500 ml, and 750 ml bottles, making it suitable for wineries, breweries, and beverage producers. The machine is being sold due to the closure of a production line and is available in very good working condition. Technical data  Capacity: up to 10,000 bottles/hour Bottle formats: 330 ml, 500 ml, 750 ml Bottle height range: 50–360 mm Bottle diameter range: 40–160 mm Label length range: 30–140 mm Rotation direction: Clockwise Number of bottle plates: 10 Number of labelling stations: 1 Air consumption: 125 L/min Power consumption: 17.3 kVA, 400 V Working height: 1,100 ± 50 mm Construction: Stainless steel frame, enclosed safety housing Control system: Micro PLC with touch-screen for speed, production, and fault management Key features: Cold-glue labelling head with oil-bath lubricated mechanisms Central carousel with centering bases for precise bottle positioning Pneumatic heated pump for adhesive circulation and return system Automatic bottle synchronization with infeed screw to prevent breakages Micrometric glue adjustment to reduce film thickness and ensure clean labelling Bottle retainers for smooth handling and reduced congestion Gear-driven transmission with clutch and emergency stop system Compact, fully enclosed design for hygiene and safety   Bjdpfx Agexl Di Djljcu

Condition: used, Year of construction: 2019, Overview This isobarometric filling and capping machine was built in 2021 by the German manufacturer Markl. The machine was built for filling glass bottles and crown caps but can be modified to can filling by the manufacturer.    Technical Details  Type: Bavaria 40/8 Isobarometric filler for glass bottles  Capacity: 3,000-13,500 bottles/hour at 0,33L; 3,000-12,000 bottles/hour at 0,5L  Number of long-tube filling valves: 40 Number of capping heads: 8 Formats:  0,33L longneck 0,33L Steinie 0,5L NRW Pre-evacuation system to reduce oxygen pickup Counter-pressure filler hygienic bottle table made of stainless steel (AISI 304)   Running direction: left - right machine in good condition Bcedpfx Asx Natvsglou

Condition: used, Year of construction: 2016, Overview This complete filling line for glass bottles is part of a brewery and used for filling beer in 330 ml glass bottles with crown caps. It consists of an automatic glass depalletizer, self-adhesive labeller, filling triblock and a carton packer. The entire equipment was installed in 2017 by Italian manufacturer Framax. All the equipment is still installed and can be viewed in person during production. Technical details  Production capacity: 2,400 bph (at 0,33l) Formats recently used: 0,33l Bottle diameter: 60mm, height is adjustable 26mm crown cap Packaging: 6x4 carton box Scope of delivery Automatic depalletizer | Framax | DEPAL SS-3000 | 2017 Automatic sheet removal Photocells for depalletizer Selfadhesive labeller | Framax | RLA-H06-S3-L3-D480 | 2016 3 stations for 3 labels (front, back, neck) Date/ batch printer Isobaric filler | Framax | Modulblock RFCI-16/16/1-DPS/C | 2016 Nominal capacity: 3.000 bph 16 Rinsing positions 16 Filling positions Single head capping unit for crown caps with cap feeding unit Double air pre-evacuation with CO2 Water spray device before capping, for reducing the amount of residual oxygen Automatic carton packer | Framax | CP-0700-1T | 2017 Box erecting and inserting machine With taping machine Accessories such as conveyors, cooling, pumps Bcedpett Um Rsfx Agleu

Condition: ready for operation (used), Year of construction: 2019, spindle motor power: 13,000 W, spindle speed (max.): 6,300 rpm, number of axes: 2, This EMCO E45 turn-mill centre was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range up to 6300 rpm. The 12-position VDI30 tool turret supports 6 driven tools, enhancing versatility. Equipped with SINUMERIK 828D OPERATE control for precise operations and a robust design with a chip conveyor and high-pressure coolant system. Reach out for more information about this machine. • Connection: KK5 (DIN 55026) • Bar capacity: 45 mm • Drive power: 13 kW • Speed range: 0–6300 rpm • C-axis on main spindleTool turret • 12-position VDI30 axial • Directional logic for up to 6 driven tools • Driven tools: max. 4 kW / max. 16 Nm • Driven tools speed: 0–5000 rpmTailstock • Programmable, hydraulically actuated • Max. clamping force: 6000 N • Morse taper: MK4 • Hollow clamping cylinder incl. draw tubeControl & software • SINUMERIK 828D OPERATE • SHOPTURN dialog programming • USB interface • Network / Ethernet • 10.4" TFT color monitor • 3D simulationMedia & machine features • Machine light • Coolant system incl. pump (3.5 bar) • Hydraulic unit • Chip conveyor interface • CE certificate • DocumentationTool measurement (E45) • Measuring arm fixed in the work area • Tool measurement on the turret • Short setup times / precise measurement / cost-efficientWorkpiece clamping • 3-jaw chuck KK5 • Max. speed: 6300 rpm • Diameter: 20 mm • Soft + hard jawsOther (machine-related) • Water gun • Air to spindle • Oil/coolant separator Bodpfxoyffgro Aglocu • Automatic coolant monitoring • Electronic handwheel • Tool change guard • Hydraulic connections • Pneumatic connections • Machine packaging: pallet + roll-up cover Additional equipment Bar feeder / magazine (SL1200 – as referenced) • Bar length: 850–1200 mm • Bar diameter: Ø 8–95 mm • Max. feed rate: 60 m/min • Bar change: approx. 3 s • Magazine change: approx. 15 s • Material support area: 550 × 1210 mm • Material capacity: 10 × Ø 55 mm • Operating side: right • Power supply: 240 V DC/DC • Air supply: 6 bar • Dimensions: 1700 × 1250 × 1090–1380 mm • Weight: approx. 500 kg • Safety device: CE • High-speed function • DocumentationSpindle extension (for bar feeder use) • E45 / MT45 / HT45 → DM45 • For 45 mm spindle • Short bars up to 1100 mm • With reducing sleeves (3 pieces) • Required for use with SL1200Chip conveyor • Hinged belt conveyor • Discharge height: 1200 mmHigh-pressure coolant unit • 14 bar / 50 Hz • Additional high-pressure pump • For tools with internal coolant • Interface & softwareRobot interface • PROFI-NET interface • 24 V signals • Safety release • Automatic/manual operation switchingAdditional components • PC keyboard USB (QWERTY) • Machine status LED: Green (Automatic), Red (Alarm), White (Material handling)Installation & mounting hardware • 4× vibration absorbers • 4× mounting brackets • 4× heavy-duty anchorsParts collection device • Pneumatically operated • Max. part length: 120 mm • Max. diameter: 45 mm (51 mm) • Max. weight: 2 kg • Collection box / conveyor belt

Condition: used, Year of construction: 2018, Executed according to FprEN 16770 Tested according to GS-HO-07 testing principles of BGHM Offline filter cleaning with automatic fire extinguishing system The dust extractor is a suction and filter unit for commercial use, designed for installation in the workplace. The dust extractor is suitable for capturing, conveying, and filtering dry wood, paper, or plastic chips and dusts from one or several processing machines. The unit is delivered fully assembled and ready for operation. Consisting of: - Pressure-resistant and pressure surge-resistant housing (>200 mbar) - Suction nozzle with non-return valve - Antistatic filter elements - Jet-pulse cleaning - High-performance radial fan with IE3 efficiency class three-phase motor (arranged on the clean air side) - Exhaust air silencer and air outlet grille - Control unit with CEE plug (phase inverter) - Automatic start control for up to 6 machines (activation via current coils or potential-free contacts possible) - Automatic filter cleaning with runtime addition - Integrated extinguishing system - Painted RAL 9006 Compressed air, prepared on site, must be supplied to the unit for cleaning (connection via NW7 coupling / 6 bar). A water pipe, provided on site, must be connected to the unit for the fire extinguishing system (connection via ½" union fitting, min. 0.5 bar). Technical data dust extractor: - Suction nozzle diameter: 355 mm - Residual dust content: < 0.1 mg/m³ (H3) - Filter area: 26 m² - Cleaning: Jet-pulse automatic with runtime addition (offline) - Volume flow: 10,000 m³/h - Standard application design nominal volume flow: 7,130 m³/h at 20 m/s at suction nozzle - Negative pressure: 3,000 Pa at suction nozzle at nominal volume flow - Sound pressure level: 72 dB(A) at 1 m away from the unit - Motor power: 15.0 kW - Motor data: 400 V / 50 Hz / 3000 min⁻¹ / IP54 - Dimensions (L x W x H): 3,500 x 900 x 2,400 mm - Weight: 1,020 kg SPÄNEX Briquetting Press Type SHB 70 RS Price: €15,000.00 Transport pipe 110 x 3.2 mm for SHB 70 RS Machine number briquetting press: 2570/2018 Intermediate hopper 1.2 m³ for attachment to the SMU 100 dust extractor, integrated rotary discharger with gear motor, opening for connection to a briquetting press or rotary valve, galvanized finish for stepless adjustment of fan performance to actual demand via variable adjustment of fan drive speed. The frequency converter increases system effectiveness, saves energy, and reduces wear on material and machinery. - Motor power: 15 kW - Integrated PID controller - Automatic energy optimization for maximum motor efficiency, even in partial load range - Integrated manual/automatic switch-over - Startup menu for quick parameterization - Integrated RFI filter according to EN 55011 - 1 B - Synchronization with already running motor - Device design: IP 55 1 pressure gauge for controlling the frequency converter and thus the power consumption depending on the open machine dampers, including connection hose to the pipework Dust extractor SMU control expansion kit BA, 1 pc, consisting of: - Slide valve control for up to 16 machines Bjdpeyfp Srefx Aglscu - 14 current coils - Multi-tone horn with beacon Rotary paddle bulk goods level indicator, 1 pc, in the intermediate hopper of the dust extractor, ATEX II ½ Ex tD A20/21 marking, to indicate maximum fill level and control a conveying system (system-specific) Storage location: Supplier

Condition: used, This listing is for 1 of 4 Watson Marlow 323 Peristaltic Laboratory Pumps Bcodpeygmdhefx Aglju Each unit is in full working condition and is ready for immediate use The Watson-Marlow 323 is a peristaltic laboratory and process pump designed for precise, controlled fluid movement, dosing and metering of liquids in scientific, pharmaceutical, biotechnological and industrial environments. It works by mechanically squeezing a flexible tube in a circular “rolling” action — this moves the liquid without it ever contacting internal pump parts, which reduces contamination and wea

Condition: used, Year of construction: 2023, machine/vehicle number: 0102-260003, The HBE321A Dynamic automatic band saw from BEHRINGER is a precise metal band saw for industry and the steel trade. It offers low cutting deviations, vibration damping thanks to cast iron band guides and a servo feed system for precise saw feeds. The linear guide system ensures stability and precise cuts. The auto-feed control automatically adjusts the feed and cutting speed. An electrically driven chip brush and sensitive cutting pressure control increase the cutting performance. The automatic guide arm minimizes the adjustment effort. Modern drives reduce energy consumption by approx. 30%. A touch control enables simple operation and the double vice ensures process reliability. HBE321A Dynamic high-performance band sawing machine Technical specifications: Smallest dimension to be sawn around 10 mm Smallest dimension to be sawn flat (W x H) 10 x 8 mm Band saw blade drive: Drive power 2.6 kW frequency-controlled Cutting speed 15 - 110 m/min (49 - 361 ft/min) Total drive power: approx. 7.6 kW (machine only without additional equipment) Voltage 400 V ± 10 %, 50 Hz with neutral conductor, control and valve voltage 24 V-DC Material feed length: 640 mm per stroke, maximum 5,760 mm Minimum cut-off length in automatic operation from 10 mm Minimum remaining piece length in automatic operation from 70 mm, in manual operation from 10 mm Saw feed: Regulated servo feed via ball screw spindle Material feed with ball screw Bcsdpfx Asyc R Rqegleu Hydraulic material clamping Hydraulic saw blade tensioning, electrically monitored Saw band cleaning with electrically driven chip brush with quick-change device, driven synchronously to the main drive. Coolant device with delivery rate 40 l/min at 2 m delivery height Coolant tank capacity approx. 70 l Length of the machine 1,850 mm, width of the machine 2,300 mm Height of the machine 2,400 mm with the hood open on the feed side, approx. 1,880 mm transport height Material support height 800 mm Base machine paint finish: light gray - RAL 7035, cover paint finish red-violet - RAL 4002 Cutting range 90° round 320 mm Cutting area 90° square 320 x 320 mm Cutting area 90° flat 350 x 320 mm Feed length single stroke 650 mm Drive power 2.6 kW Cutting speed 15 - 110 m/min Saw blade dimensions 4,440 x 34 x 1.1 mm Machine weight 1,900 kg