Used Register Index for sale (140)

Condition: used, Single-spindle lathe INDEX B60 Ndjdpfx Aoxt U Nwogzsf

Condition: good (used), Machine come with equipement from pictures. Parts shown by hand not come. Njdpfxjvx Tikj Agzjdf

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW Ndsdswbvhajpfx Agzsf turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg

Condition: excellent (used), Year of construction: 2000, operating hours: 50,000 h, functionality: fully functional, turning diameter over cross slide: 42 mm, turning length: 150 mm, turning diameter: 42 mm, bar passage: 42 mm, Machine is operating in production — live production tests can be arranged by appointment. Ndsdpfx Agsw Smf Aszef Condition: Operational in production. Coolant: Currently using oil‑based cutting fluid; convertible to water‑based emulsion. Accessories: Numerous tooling holders and live tools included, bar feeder, swarf coveyour, C axis, spare parts. Documentation: All books and manuals supplied. Please provide or request: model/control type, spindle specs, run hours, tooling inventory, asking price (per unit or lot), and location/availability for inspection.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 34,044 h, functionality: fully functional, machine/vehicle number: 270240, number of spindles: 6, bar diameter (max.): 22 mm, bar length: 3,000 mm, spindle diameter: 40 mm, TECHNICAL DETAILS Number of spindles: 6 Spindle bore: 40 mm Bar diameter: 22 mm Bar loader length: 4.70 m Bar length: 3.0 m Ndjdpfxew T Rygo Agzef MACHINE DETAILS Rated voltage: 400 V Rated power: 60 kW Connected load: 71 kVA Maximum fuse: 125 A Line voltage: 400 V Electrical frequency: 50 Hz Control voltage: 24 V DC On-time: 50,134 h Hydraulics on: 43,972 h Running time: 38,809 h Production: 34,044 h EQUIPMENT - Complete replacement of the energy supply for all 6 main spindles in April 2025 - Single-NCU without PCU - Bar feeder Iemca SIR MS22 P 33 (year of manufacture 2015)

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 720052, turning length: 600 mm, turning diameter: 140 mm, bar passage: 65 mm, controller model: Siemens 840 D PowerLine, distance between spindles: 615 mm, TECHNICAL DETAILS Turning diameter: 140 mm Turning length: 600 mm Maximum bar diameter: 65 mm Distance between spindles: 615 mm Max. spindle speed: 5,000 rpm Main spindle drive power: 20/27 kW Spindle nose: ISO 702/1 140 mm Spindle bearing diameter: 110 mm Max. torque: 105/145 Nm C-axis: 0.001 Chuck diameter: 140 - 160 mm Tool turret: 3 Y-axes: 2 to 3 axes +/- 35 mm B-correction axes: 2 axes +/-1 Driven tool positions: 3 x 12 Tool holder: VDI 25 x 48 DIN 69880 Drive power for driven tools: 8 kW MACHINE DETAILS Ndjdpfoxg Im Aox Agzsf Control: Siemens 840 D PowerLine Dimensions & Weight Space requirements: approx. 8.0 x 3.5 x 2.5 m Machine weight: approx. 6,500 kg Electrical Data Rated voltage: 400 V AC Rated current: 101 A Rated power: 59 kW Number of phases: 3 Frequency: 50 Hz Control voltage: 24 V DC Total power requirement: 53 kVA EQUIPMENT Index MBL bar loader

Condition: used, Single-spindle lathe INDEX B60 Nedpfext U Nqjx Agzsdf

Condition: ready for operation (used), functionality: fully functional, turning length: 585 mm, turning diameter: 470 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 600 mm, Lathe in very good condition with comprehensive accessories! TECHNICAL DETAILS Working Area Nodpfxjw Nh Iae Agzjdf Maximum turning diameter: 470 mm Maximum nominal turning length: 585 mm Travel X-axis: 200 mm Travel Z-axis: 600 mm Turret Number of stations: 14 Tool holder: according to DIN 69880, diameter 30 mm Tool holder cross-section: 20 x 20 mm Indexing time per station: 0.5 s Drive torque for driven tools: 20 Nm Driven tool stations: 7 Max. speed of driven tools: 4,500 rpm Axes Rapid traverse X and Z: 30 m/min Feed force X: 5,000 N Feed force Z: 10,000 N Main Spindle Spindle bore: 65 mm Spindle nose: according to DIN 6353 Maximum direct drive speed: 5,000 or 6,000 rpm Drive power: 22 kW MACHINE DETAILS Control system: Siemens Sinumerik 810 Programmable parameters: 700 Dimensions & Weight Dimensions (L x W x H): 3,162 x 1,720 x 1,715 mm Machine weight: 4,800 kg EQUIPMENT 1.5 MB main memory 10-inch color monitor Automatic program storage C-axis Linear and circular interpolation Block-by-block execution Block search Programmed stop Absolute or incremental programming in metric or imperial Tool radius compensation M, S, and T functions Fixed cycles and subprograms Logical and arithmetic operations

Condition: used, _____ Description: Year of manuf. : 2009 Control : Siemens C200-4D SL In General: Year of construction:2009 Control system:Siemens 840 Dsl (C200-4D SL) Bar capacity:65 mm Milling spindles:18,000 rpm Main spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° Z-axis:390 mm Bar capacity:65 mm Clamping cylinder:Hollow clamping cylinder Chuck:3-jaw chuck Sub spindle: Technology:Motorised spindle Speed:5,000 rpm Nodpfjvxmy Njx Agzsdf Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° X-axis:600 mm Z-axis:390 mm Bar capacity:65 mm Chuck:3-jaw chuck Tool carrier I: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 X-axis:350 mm Y-axis:160 mm (+/- 80 mm) B-axis:230° Tool carrier II: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 Y-axis:160 mm(+/- 80 mm) B-axis:230° Tool magazin: Technology:Chain magazine Number of stations:80 pieces Tool changer:Double gripper Tool length max.:180 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system with filter Parts removal:Gantry-type pick-up Bar loader interface:Electrically prepared Tool monitoring:Drill breakage monitoring

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: MS 25E19111, Number of spindles: 6 Spindle bore: 27 mm Turning length: 59 mm Nodpfx Agjv Raatjzodf Hexagonal material: 24 mm Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 - 5020 rpm Torque: 95 Nm Control: INDEX Total power requirement: 20 kW - 6 cross slides - 6 longitudinal slides - Multi-edge device - Thread cutting device - Hydraulic pick-up device - Workpiece conveyor belt - Bar loading magazine, IEMCA, type PRA 40/35/P

Condition: used, Year of construction: 2006, spindle passage 65 mm spindle diameter in front bearing 110 mm number of spindle speeds 5.000 U/min Power 20/27 KW Control INDEX C 200-4 travel -x axis 850 mm travel -z axis 260 mm number of tapers in turret head 12 driven tools turning speeds 6.000 U/min CNC turning and milling center vertical | INDEX - V160C equipped with turret, milling spindle and pallet conveyor system. Ndedovzcnzspfx Agzsf The machine only has 17.000 hours of Power-On. The machine is in good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-160C | V-160 C | V 160 C | V 160C

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 500641, turning length: 710 mm, turning diameter: 300 mm, travel distance X-axis: 215 mm, travel distance Y-axis: 180 mm, travel distance Z-axis: 710 mm, total height: 2,150 mm, total length: 2,150 mm, total width: 3,160 mm, TECHNICAL DETAILS Spindle Working Area Spindle bore (collet clamping): 65 mm Spindle diameter at front bearing: 110 mm Maximum speed: 5,000 rpm Spindle nose ISO 702/1 Size: 6 Chuck diameter: 250 mm Max. torque (100%): 275 Nm Max. power (100%): 43 kW Tailstock Electrically traversable Centre distance (710): 740 mm Max. thrust force (electric): 10,000 N Cross Slide 1 XYZ (upper) Traverse X-axis: 215 mm Traverse Y-axis: 180 mm Traverse Z-axis: 710 / 1,250 mm Feed force X-axis: 8,000 N Feed force Y-axis: 16,000 N Feed force Z-axis: 13,000 N Rapid traverse X-axis: 20 m/min Rapid traverse Y-axis: 7.5 m/min Rapid traverse Z-axis: 20 m/min Resolution X-axis: 0.0005 mm Resolution Y-axis: 0.0005 mm Resolution Z-axis: 0.001 mm Tool Carrier Number of tools: 12 Tool system DIN 69 880: Ø30 mm MACHINE DETAILS Dimensions and Weight Height: 2,155 mm Footprint (710): 4,140 mm x 2,155 mm Njdpfx Agewxw Upszjdf Installation area (710, without bar feeder): 4,140 mm x 3,570 mm Weight (710): approx. 6,500–7,700 kg Three-phase current: 400 V, 50/60 Hz Connected load: 24 to 83 kVA Main line fuse: 35 to 125 A EQUIPMENT Milling spindle set 6-position tool changer HKS-50B KM40 Material removal unit Workpiece handling WHU201 / WHW80/700 Chip conveyor: hinged belt Discharge height: 1,250 mm Coolant fine filtration: hydrostatic paper band filter Vacuum rotary filter W-UAT-106A MMS system LUBRIX 750

Condition: used, Single-spindle lathe INDEX B60 Ndodsxt U Nkepfx Agzof

Condition: used, Year of construction: 2001, workpice diameter max. 90 mm forward bearing diameter 140 mm Turning speeds mainspindle 4.200 U/min Power 35,5 KW Control INDEX C 200-4 travel -x axis 1.500 mm travel -z axis 340 mm Ndjdpfx Agevzcnbozof travel -y axis 180 mm b-axis 360 ° CNC turning and milling center vertical | INDEX - V300 equipped with a turret for driven tools as well as y- + B- axis. Further information: - direct measuring system on X + Z The machine is in good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-300 | V 300

Condition: used, Single-spindle lathe INDEX B60 Njdpext U Iyjfx Agzjdf

Condition: used, Single-spindle lathe INDEX B60 Ndsdpfxoxt U Imj Agzjf

Condition: used, Single-spindle lathe INDEX B60 Nodpfx Agsxt U Igjzsdf

Condition: used, Single-spindle lathe INDEX B42 Njdpsxt U Iaofx Agzedf

Condition: used, Single-spindle lathe INDEX B42 Ndjdpfxjxt U H No Agzjf

Condition: used, Single-spindle lathe INDEX B42 Ndedpfx Agoxt U H Ajzjf

Condition: used, Single-spindle lathe INDEX B30 Njdpfx Agoxt U Hvjzedf

Condition: used, Cnc multispindle lathe INDEX MS32C Nedsxt U Hpepfx Agzjdf

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Number of counter-spindles : 1 SPINDLES - Max. bar diameter : 40 [mm] - Spindle speeds : 7000 [rpm] - Spindle power : 13/24 [kW] NUMERICAL AXES - Slide unit 1.1 : X and Z axes controlled by NC - Slide unit 1.2 : X and Z axes controlled by NC - Slide unit 2.1 : X and Z axes controlled by NC - Slide unit 2.2 : X and Z axes controlled by NC - Slide unit 3.1 : X and Z axes controlled by NC - Slide unit 3.2 : X and Z axes controlled by NC - Slide unit 4.1 : X and Z axes controlled by NC - Slide unit 4.2 : X and Z axes controlled by NC - Slide unit 5.1 : X and Z axes controlled by NC - Slide unit 5.2 : X and Z axes controlled by NC - Slide unit 6.1 : Z axis controlled by NC - Slide unit 6.2 : X and Z axes controlled by NC POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 77 [kW] Njdpfxoxqhtks Agzodf WEIGHT & DIMENSIONS - Machine floor space : 3329 x 2032 [mm] - Machine height : 2654 [mm] - Machine weight : 7100 [kg] MACHINE HOURS - Number of working hours : 47580 [h] EQUIPMENT - CNC : Siemens 840D (Powerline) - Double NCU - 2 NC control panels - Cutting force monitoring: ARTIS - Chips conveyor - Coolant tank * with high-pressure pump : 80 [bars] - Bar loader : Index MBL 40-6 - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: used, Cnc multispindle lathe INDEX MS42C Njdexpi Iajpfx Agzodf

Condition: used, Cnc multispindle lathe INDEX MS32C Ndsdpfx Agexma Npszjf