Used Rivet Press for sale (12,250)

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Format: 400×300 mm Dodpfx Aez Rk N Hei Ejwd Pressure: 3 tons Made in Germany.

Condition: good (used), Karl Krause Hot stamping press Manufactured by Karl Krause, Germany, The machine is fully operational, after modernization of the control system. Extendable work table. Timer control allows the machine to be started at a specific time to ensure it is ready for operation. 380V power supply. Heating plate size: 400x530mm. Weight: approx. 800kg. Dwsdpfx Aiozz Hife Ejd

Condition: good (used), Bookbinding press with tapping block Djdpfx Aoz Rk Rkji Ejwd The machine is fully operational and ready for use. Approximate format: 480 x 330 mm 3-ton pressure

Condition: used, Year of construction: 1960, functionality: fully functional, pressure 1000 t stroke 600 mm weight of the machine ca. 4 t Dwjdpfow Syd Eox Ai Eed

Condition: good (used), Year of construction: 1982, functionality: fully functional, Hydraulic Try-Out Press (Four-Column Press) Pressing force: 3.000 kN Maximum slide stroke: 1,200 mm Table size: 2.600 x 1.300 mm Distance between columns: 2.050 mm (long side), 700 mm (short side) Maximum daylight (clamping surface to slide): 1.350 mm Minimum shut height: 250 mm Stroke speeds: Rapid traverse (downward): 140 mm/sec Rapid traverse (upward): 140 mm/sec Working speed: 16–50 mm/sec Operating pressure: 300 bar Power requirement: 55 kW Tank capacity: 1.200 l Dwjdpe Ah Sk Isfx Ai Esd Total weight: 55.000 kg Press height: 5.800 mm

Condition: ready for operation (used), Year of construction: 1971, functionality: fully functional, pressing force: 1,600 t, stroke length: 1,600 mm, oil tank capacity: 3,500 l, total height: 6,900 mm, overall weight: 72,000 kg, Engines: Main engine approximately 55 kW, 2 HD pumps each approximately 4.5 kW. Djdpfo Aibbtox Ai Eowd

Condition: used, With this offer, you are purchasing a used manual transfer press ‘Lotus LTS 150 B from 2023’. Item for sale: 1 x Lotus LTS 150 B with the following equipment: Includes DTF gel oven Year of manufacture: 2023 Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Dwodpfsx Eg Upox Ai Eed Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: used, machine/vehicle number: 008701, Max working length: 2740 mm Max working width: 1240 mm Dwodpezq Urtjfx Ai Esd Membrane: yes No of positions for the rolls: 2 No of work tables: 1

Condition: ready for operation (used), Year of construction: 1968, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: Exner Type: HA SP-340 SS Dwodpfx Aj Adu Ulsi Eed Year of manufacture: 1968 Machine number: 1 PRESS DATA Press force: approx. 34 t Table dimensions: 1,000 × 800 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 2,000 mm Width: 2,000 mm Height: 3,200 mm Weight: 8,000 kg

Condition: ready for operation (used), Year of construction: 1964, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Djdpj Advcdefx Ai Eswd TECHNICAL DETAILS Press Clamping force: 68.6 kN Table Table dimensions: 600 × 600 mm Number of slots: 4 Electrical data Operating voltage: 380 V Connected load: 4 kW Power: 1 kW MACHINE DETAILS Manufacturer: Reis Type: 60A/7H Machine number: 48/64 Year of manufacture: 1964 Machine type: Embossing press Dimensions and weight Length: 1,500 mm Width: 1,300 mm Height: 3,000 mm Weight: 3,000 kg EQUIPMENT 4 slots in the table

Condition: used, total length: 1,300 mm, total height: 1,400 mm, total width: 800 mm, Year of manufacture: 2025 Colour: Blue Empty weight: 800 kg Price: On request Control: Teach-in Motor power: 4 kW Press force: 28 metric tons Maximum stroke: 180 mm Table: 300 × 550 mm Dwedpfeztxnqox Ai Esd - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: HB10011N2025006 - Operating hours: 0 - Power: 28ton - Stroke max: 180mm - Table length: 300mm - Table width: 550mm - Motor power: 4.0kW - Transport dimensions: 1300mm x 800mm x 1400mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 920-715, overall weight: 850 kg, No minimum price – guaranteed sale to the highest bidder! Complete set: Briquetting press including dust extraction system! MACHINE DETAILS Dsdpfx As Aidvksi Ejwd Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,450 x 1,450 mm Shipping weight: 850 kg EQUIPMENT CE marking

Condition: used, machine/vehicle number: 008256, Max width workable: 800 mm Max length workable: 2500 mm Dodpfx Ajx A Hfvoi Eowd Max height workable: 1340 mm Max feed speed: 40 m/min

Condition: used, functionality: fully functional, This offer is for a used ‘Xerox Iridesse Production Press’ colour production system Items for sale: Dwsdszap Sbjpfx Ai Esd 1 x Xerox Iridesse Production Press with the following specifications: Includes Fiery Server EX-P6 Includes paper decks A-CF03 + A-CF04 Includes stacker Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 14,303,610 pages Colour: Approx. 14,006,634 pages Black: Approx. 296,976 pages Condition: This is a second-hand machine, which may show signs of use (minor scratches or discolouration). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, Year of construction: 1970, functionality: fully functional, ja weight of the machine ca. 9,5 t serial number 10457/2 Djdpevvx Exofx Ai Eswd 160000 KG stroke of worktool slide 41 Hub/min +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, functionality: fully functional, With this offer, you are purchasing a used black-and-white production system, the “Minolta bizhub PRESS 2250P.” Items for sale: 1 x Minolta bizhub PRESS 2250P with the following features: Includes internal controller Includes LS-506/RU-510/PI-PFU finisher Includes paper deck Includes duplex ADF / R-ADF Not the right configuration? It’s no problem to customize the machine to your specifications. Feel free to contact us! Meter readings: Total: Approx. 7,836,379 pages Condition: Dwsdpfx Aiezl S Tqs Eod This listing is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Packaging and Shipping: You’re welcome to view the device during our business hours. Please schedule an appointment! Sea-worthy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functionality test for you. For more information, you’re welcome to contact us directly.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Press Machine type: Eccentric press Dedpfx Ao Ad Ifdsi Eswd Manufacturer: EBU Model: H50F Serial number: P5318482 Rated force: 500 kN Stroke adjustment: 8–120 mm Ram adjustment: 70 mm Stroke rate: 115 min⁻¹ Table Table dimensions: 650 × 520 mm Hole diameter: approx. 120 mm MACHINE DETAILS Drive Motor power: 3 kW Dimensions and weight Length: 1,500 mm Width: 800 mm Height: 2,400 mm Weight: 3,000 kg EQUIPMENT Guards for the flywheel are available.

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between December 1, 2026, and December 10, 2026! TECHNICAL DETAILS General Information Machine type: Single-column eccentric press Machine weight: approx. 5.5 t Performance Data Pressure: 63 t Stroke rate: 120 strokes/min Stroke and Working Data Overhang: 250 mm Stroke: 8–100 mm Installation height: 330 mm Ram adjustment: 63 mm Table and Clamping Surfaces Table: 715 × 500 mm Clamping plate: 700 × 480 mm Through-hole in the table: 240 mm Through-hole in the clamping plate: 110 mm Ram clamping surface: 450 × 280 mm Tilting Design Tilting stages: 4 Through-hole to the rear: 325 × 500 mm Through-hole downwards: 360 × 160 mm Additional Clamping Plate Dimensions: 700 × 480 × 850 mm Dimensions Space requirement: approx. 1.2 × 1.7 × 2.7 m EQUIPMENT Hydraulic adjustment system for tilting the press Central lubrication via hand pump Additional clamping plate Two-hand operation Foot pedal release can be configured Dodpfxj Achxbs Ai Ejwd Operating mode selector switch for setup, continuous stroke, and single stroke Emergency stop switch Part counter Various accessories

Condition: used, total length: 1,200 mm, total width: 800 mm, total height: 1,800 mm, Year of manufacture: 2025 Colour: Blue Empty weight: 450 kg Price: On request Dwsdpfjztxn Rex Ai Eod - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: PB12093N2025005 - Operating hours: 0 - Drive system: Conventional - Vertical/Horizontal: Horizontal and vertical - Number of rolls [pcs.]: 3 - Power [kW]: 1.5 - Shaft diameter [mm]: 50 - Top roll diameter [mm]: 155 - Bottom roll diameter [mm]: 155 - Bending speed [mm/min]: 11 - Capacity diameter round [mm]: 50 - Options: Digital readout - Transport dimensions: 1200mm x 800mm x 1800mm (l x w x h) - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2026, machine/vehicle number: Pro.b 301365530.165, functionality: fully functional, pressing force: 30 t, stroke length: 535 mm, number of cylinders: 6, workpiece length (max.): 3,000 mm, cylinder diameter: 60 mm, No minimum price – guaranteed sale to the highest bidder! The machine is new and has no operating hours! TECHNICAL DETAILS Press drive: Hydraulic Dedpfx Aj Af Hidji Eewd Total pressure: 30 t Number of cylinders: 6 Cylinder diameter: 60 mm Plate material: Steel Workpiece length: max. 3,000 mm Workpiece width: max. 1,300 mm Workpiece height: max. 535 mm Total stroke: 535 mm Number of working areas: 1 MACHINE DETAILS Operating hours: 0 h Voltage: 400 V Current consumption: 5 A Fuse rating: 16 A Main motor power: 1.5 kW Dimensions & Weight Dimensions (L x W x H): 3,400 x 1,700 x 1,950 mm Unladen weight: 2,000 kg Number of transport packages: 1 EQUIPMENT Documentation CE certificate CE marking

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, pressing force: 70 t, stroke length: 400 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, cylinder diameter: 70 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press drive: Hydraulic Total pressure: 70 t Working pressure: 2 kg/cm² Total stroke: 400 mm Number of working stations: 1 Number of levels: 1 Plate material: Mounted plate Number of cylinders: 6 Cylinder diameter: 70 mm Workpiece length: max. 3,000 mm Workpiece width: max. 1,300 mm Workpiece height: max. 400 mm Heating type: Oil-heated Temperature: max. 120 °C MACHINE DETAILS Dweds Af Hn Hepfx Ai Ejd Main motor power: 2.1 kW Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,100 x 2,050 mm Unladen weight: 4,020 kg Number of transport packages: 1 EQUIPMENT Documentation Heating boiler CE marking CE certificate

Condition: like new (used), functionality: fully functional, Year of construction: 2007, operating hours: 20 h, machine/vehicle number: 21279, overall weight: 1,800 kg, Equipment: emergency stop, foot remote control, GEKA HYD55 AS new, only used ca 20 hours Punching - 55 ton Dwjdpfx As Ah Rlxei Ejd Shearing - 110 ton Angles - 120 x 120 x 10 mm Flat Bars - 300 x 15 mm Bars - Ø40 mm Bars - 40 mm Punching - Ø 40 mm x 10 mm 1000 mm electric lenght stop

Condition: used, Year of construction: 1970, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 63 t Stroke: 250 mm Travel: 8–100 mm Stroke rate: 140 strokes/min Total power requirement: 7 kW Machine weight: approx. 3.5 t Table and ram Table depth: 710 mm Table width: 500 mm Ram dimensions: 450 × 280 mm Ram adjustment: 63 mm EQUIPMENT Dodpfx Ae Aa Nahei Eswd No information available regarding accessories.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, controller model: Delem DA-41s, working width: 2,000 mm, stroke length: 100 mm, throat depth: 200 mm, pressing force: 40 t, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of axes: 4 (Y1 + Y2 + X + R) Press force: 40 t Working width: max. 2,000 mm Stand distance: 1,800 mm Overhang: 200 mm Rear gauge depth: 750 mm Stroke: max. 100 mm Punch holder: Quick-change system Tool holder type: European style Dwodpfs Aidwlex Ai Ejd MACHINE DETAILS Control: CNC Control type: Delem DA-41s Connected power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 2,450 x 1,900 x 2,140 mm Machine weight: 5,500 kg Transport packages: 2 pcs. EQUIPMENT Tools included Finger guard Documentation CE marking

Condition: good (used), Year of construction: 2012, functionality: fully functional, power: 55 kW (74.78 HP), input voltage: 400 V, type of input current: AC, total length: 13,000 mm, total width: 4,600 mm, total height: 2,330 mm, overall weight: 18,000 kg, Equipment: CE marking, documentation/manual, Membrane Press WEMHÖNER VARIOPRESS® – Model BASIC Plus Technical Data: Press System: Hydraulic, single-daylight, upward-acting press with 2 tables, with automatic Vario-pin system and turning system. Year of Construction: 2012 Press frame consists of a steel frame, which is screwed together to form a closed unit. Each frame is made from a single piece. Dimensions of the heating plate: 2,800 x 1,500 mm Height of the press chamber: 60 mm Working height: approx. 950 mm Opening width: max. 150 mm Automatic membrane tension: Yes Number of press cylinders: 6 Diameter of press plungers: Ø 125 mm Design of the press tables: 2 tables with pin system, solid steel plates – top and bottom. Max. loading or workpiece size: approx. 2,540 mm x 1,250 mm Total press force: 2,400 kN Installed power: 55 kW Operating voltage: 400 V Control voltage: 24 V Brake voltage: 205 V Frequency: 50 - 60 Hz Electrical equipment: According to EN Cutting station: Yes Chamber pressure: max. 6 bar Operating pressure of the hydraulic system: max. 320 bar Required air pressure: min. 8 bar / approx. 80 Nl/ Dwedpfx Ao Aid Etei Eed Multi-function frame: Yes – Wemhöner patent – Height of the multi-function frame 20 mm 2-daylight lifting system including support table 2 tray carriages with an aluminum plate. The aluminum plate consists of an aluminum sheet with grooves and channels for ventilation, as well as a support frame of 20 mm. Turning Turning device – lateral As soon as the tray reaches the position at the outlet of the press, the turning head rotates the entire workpiece mat by 180°. During the turning process, a vacuum system is activated to fix the door mat under the turning head. As soon as the turning head reaches the end position, the vacuum is switched off, and the doors can be trimmed by the operator in one step with a special knife. - Robust, welded steel frame construction for supporting the machine elements - Hydraulically controlled turning process - Turning table with plastic cover - Vacuum system for the turning table - Turning process approx. 18 seconds Electrical control: Programmable controllers (PLC) of type SIEMENS Step 7 for the entire scope of supply. Control panel as a touch panel for the PLC control SIEMENS MP 277 with a 10-inch color monitor in the national language. Decentralized switching and control panel including wiring. Analog modem for monitoring the program sequence of the PLC controllers.