Used Rock for sale (1,243)

Condition: good (used), tow bar, trailer coupling -Manufacturer: Rockinger, trailer coupling automatic with bracket -Type: 260G150 -Support load: 1000 kg Hnjdpfjw Dpm Iox Ad Dow -Towing capacity: 9.5 t -Transport dimensions: 360/360/H280 mm -Total weight: 26.8 kg

Year of construction: 2002, condition: good (used), Kaut absorption dryer CR 600 Manufacturer: KAUT GmbH Type: Dryer CR600 Year of construction: 2002 Dry air volume, nominal: 600 cbm / h Dry air volume, blowing freely: 750 cbm / h Regeneration air volume: 170 cbm / h Voltage: 400V / 3N + PE / 50Hz Power consumption: 5.9 kW Párátlanítási teljesítmény 10°C/70% relative páratartalom mellett: 3.8 kg/h Párátlanítási teljesítmény 20°C-on / 60% relative páratartalom: 4.4 kg/h Hnodpfx Aetib R Iod Dow Párátlanítási teljesítmény 20°C/80% relative páratartalom mellett: 5.2 kg/h Available external pressure, dry air side: 220 Pa Available external pressure, regeneration air side: 150 Pa Installation and dimensions Process air inlet (W x H): 380mm x 257mm Regeneration air inlet (W x H): 166mm x 179mm Dimensions (H x W x D): 735mm x 1125mm x 600mm Weight: 110kg

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 3074, feed rate Y-axis: 10 m/min, total length: 4,984 mm, workpiece height (max.): 60 mm, total width: 1,425 mm, edge thickness (max.): 3 mm, total height: 1,618 mm, overall weight: 1,400 kg, type of input current: three-phase, height adjustment type: mechanical, input voltage: 400 V, extraction nozzle diameter: 140 mm, working height: 888 mm, input current: 32 A, input frequency: 50 Hz, extraction connection diameter: 140 mm, year of last overhaul: 2025, Due to the acquisition of a new machine, our reliable edge banding machine, purchased new in 2016, is now for sale. The machine has operated in a joinery workshop with 8 employees. It underwent a complete overhaul in January 2025. New radius scrapers, new milling tools, and new polishing wheels were installed. The pre-milling unit has been re-sharpened. The glue roller’s clutch has been replaced. The glue pot was completely refurbished and cleaned. The machine is suitable for both EVA granulate (e.g., Henkel Dorus KS351) and PUR adhesives. The degree of pre-milling, the edge material thickness, and the position of the lower and upper milling tools can be conveniently adjusted from outside the machine housing via manual handwheels. The control system allows custom edge banding programs to be saved. The machine automatically and pneumatically switches between 0.4 mm and 2.0 mm edge banding via program. Main specifications: Hnedpfx Adexlr S He Djw - Power: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100–150 l/min) - Touchscreen - Saved edge banding programs - Feed speed: 10 m/min - Edge material thickness, in rolls: 0.5–3.0 mm - Workpiece thickness: 8–60 mm (banding 60 mm thick materials possible) - Minimum workpiece width: 70 mm - Minimum workpiece length: 180 mm (for end trimming saw) / 220 mm (for corner rounding) - Processing units: - Diamond pre-milling (12,000 rpm) - Release agent tank/nozzle - Gluing station - End trimming saw - Milling unit R2 - Radius scraper R2 - Corner rounding unit - Cleaning agent tank/nozzle - Flat scraper - Polishing wheel Price does not include VAT.

Condition: excellent (used), Year of construction: 2020, 6-ton demolition ball Manufacturer: Rockworks Year of manufacture: 2020 Hodpfxswa Nv Ij Ad Dsnw Diameter: approx. 1,100 mm

Condition: excellent (used), Hebrock 3003 Edge Bander well equipped, can be tested before purchase Initial MILLING AirTronic zero joint glueless system - hot air glue application with a roller, pneumatic preliminary guillotine pressure rollers anti-adhesive fluids finished cutting saw top-bottom milling unit, R1 - R2 pneumatically adjustable corner milling unit pneumatically adjustable flat scraper max element height 50mm max veneer thickness in roll 3mm feed 10m/min Hnsdpfewmc I Dex Ad Dsw power consumption 15.8KW very good condition, fully fulfills its functions

Condition: used, Year of construction: 1998, functionality: fully functional, 2 pieces vacuum drying oven GMP-compliant, Vötsch Industrietechnik (can also be sold individually). Material product-touched stainless steel 1.4435. Type of heating, externally heated hollow inserts, the ceiling is also heated, double-shelled with meander baffles inside, pressure-tight up to 3 bar. Heating via heating/cooling circuit (indirect heating using hot water) via separate DHW thermistats. Operating temperature max. 95°C, operating pressure inside tank 0 to 1 bar abs. External dimensions: 1485 mm width (housing), 2000 mm height (housing), 1700 mm depth Insert trays: 1200 mm width x 950 mm depth Number of shelves: 13 pieces Covered area: 14.8 m2 Weight approx. 2900 kg per dryer Connections: Hot water connection (flow and return) Vacuum connection Hsdpjucdqnsfx Ad Djnw Heating of the vacuum drying ovens by means of a heating medium, e.g. water, connections at the rear. Heating of the heating medium by means of temperature control unit with control type 95-36-E Nominal voltage 400 V 3/N PE AC, 50 Hz, heating capacity of the unit 36 kW, heating capacity can be reduced to 18 kW in a definable temperature range.

Condition: new, Year of construction: 2024, ON STOCK!!! Pre-milling unit End Trim saw Top and Bottom Trimming unit Corner Rounding Unit Surface Scraper Touch Screen Controller Max. edge thickness: 3mm Min./max. workpiece thickness: 8–50mm Hnodpfxoglfwte Ad Dow Min. workpiece length: approx. 160mm Feed speed: 10 m/min. Ready to operate: approx. 3.5min. Power consumption: ∅ approx. 7.4kW Electrical connection: 400V/3Ph/50Hz Table height: approx. 900mm Machine dimensions: approx. 4,050x1,300x1,400mm (LxWxH) Weight: approx. 820kg Exhaust connection: ∅ 1x140mm Edge Banding Machine with PLC Premilling (DIA-tools incl.) up to max. 2 mm milling depth Corner rounding unit Radiusmilling R=2 mm Radius edge milling R=2 mm radius profile scraper

Condition: used, Machine vise, sturdy vise, drill vise Hsdeb A Nuhspfx Ad Donw -Vise: rotatable -Jaw width: 175 mm -Clamping depth: max. 270 mm -Dimensions: 630/450/H175 mm -Weight: 55 kg

Condition: used, Year of construction: 2007, Used Machine GM020.0068 AKV 3003 DK - F Year of manufacture: 2007 Specification: 3 mm 1st milling station: Combination Hjdjw Nih Ijpfx Ad Denw Surface pull scraper with extraction Chassis Pneumatic milling adjustment Limit switch lever, 7.5° inclination

Condition: used, Year of construction: 1991, Used machine Hnjdjwka Tlopfx Ad Dow Year of construction: 1991 max. workpiece height approx. 40 mm min. workpiece length approx. 250 mm min. Workpiece width approx. 70 mm Feed rate approx. 11 m/min. Ready for operation approx. 4-5 min. Power consumption approx. 11 kW with heated infeed ruler with quick-heating adhesive container Pneumatic roller capping up to 3 mm with cross-cut saw up to 5 mm edge thickness with routing station equipped with combined insert routers on request for radius, straight and chamfer routing Extension arm, can be folded down and extended to the front with chassis with integrated extraction system L x W x H 3600 x 1400 x 1200 mm Weight approx. 670 kg Availability: at short notice Location: Hochheim Hochheim

Condition: used, Year of construction: 1996, charge load 135 liter 1220 mm tank diameter / tank height 1.220 / 1035 mm 304 mm motor capacity 0,75 kW motor speeds: 1500 U/min voltage 400 V weight of the machine ca. 600 kg dimensions of the machine ca. 1,38 x 1,28 x 1,04 m Dryer - Serial-No.: 15772 / 96-08 Hsdjwcg Eropfx Ad Djnw - Machine ON: 44.854 h - Heat unit

Condition: used, Year of construction: 2017, machine/vehicle number: 1271, max. Anleimerstärke : 2 mm min. Werkstückdicke : 10 mm max. Werkstückdicke : 40 mm min. Werkstücklänge : 180 mm Vorschubgeschwindigkeit : 7 m/min Aufheizzeit : 4 min Fügeaggregat : Ja, mit 2 Fräsaggregaten Hsdovniu Ujpfx Ad Djnw Fügewerkzeug : Dia-Wechselplatten-Fräser Verstellung des Einlauflineals : manuell Kappschere bis : 2 mm Einzelzuführung der Kante : möglich Beleimung : Leimkontaktwalze Ausführung Leimbecken : wechselbar mit Auslaufkanal Pu- Beleimung : möglich Kappsäge : Ja Kombiaggregat Bündig/Fase/Radius : pneumatisch zustellbar Ecken-Abrundaggregat : pneumatisch zustellbar Flachziehklinge : Ja, tastend Aggregatenanzeige : am Display Steuerungsart : SPS Streckensteuerung Bedienung : Touch-Screen Motorleistung : 7,4 kW Fahreinrichtung : Nein Ausziehbare Rollenauflage : Ja Schutzhaube : Ja Gewicht ca. : 750 kg Absaugdurchmesser : 140 mm Laufmeter ca. : 7900 m

Condition: new, Year of construction: 2024, The machine is on stock!!! Max. edge thickness 3 mm Min./Max. workpiece thickness 8 – 50 mm Min. workpiece length approx. 160 mm Feed speed 10 m/min Gluepot heating time approx. 3.5 minutes Power consumption Ø approx. 7.4 kW Electrical connection 400 V/3 phase/50 Hz (Transformed to your voltage) Hnjdpfjhymgdsx Ad Dsw Table height approx. 900 mm Machine dimensions (LxWxH) 4300x1300x1400mm Weight approx. 900 kg Exhaust connection Ø 1 x 140 mm

Condition: used, Machine vise, sturdy vise, drill vise -Jaw width: 170 mm Hnsdpfx Ajb A Nuned Dow -Clamping depth: max. 240 mm -Dimensions: 650/350/H130 mm -Weight: 40 kg

Condition: used, Year of construction: 2018, Used machine GM020.0050 AKV 3005 DK - F Year of manufacture: 2018 Specification: 8 mm 1st milling station: Combination Pneumatic 3-point adjustment Cleaning station Corner rounding cutter Radius scraper station incl. lift Surface scraper PLC control incl. touchscreen Interchangeable tanks Hnedpfxjw Nif Ho Ad Dew Nesting Glue discharge 60 mm workpiece thickness (joining and corner milling) Spraying device for panels Edge protection spraying Short workpieces

Condition: new, Year of construction: 2025, HEBROCK Edge Bander F2 next with SPS control system (incl. touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm: pre-milling unit (incl. DIA tool) up to 2 mm milling depth, maintenance-free glue pot with preparation for interchangeable tank incl. glue discharge device, HF cross-cut saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and indexable insert cutter head (combi version), robust chain drive, double roller upper pressure with ball bearings, inspection window on the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Hnodpjwmdbrjfx Ad Dew Including: F2/500/10 Whispercut pre-milling head F2/500/20 Combination milling head F2/500/2 Radius cutter R=2mm F2/12 Surface scraper (incl. pneumatic lift)

Condition: used, Hebrock AKV 3005 edge bander, well-equipped, can be tested before purchase, Liquids before milling units, Pre-milling cutters, Glue application with roller, equipped with glue drain, Second glue pot included, pneumatic pre-cut guillotine, pressure rollers, final trim saw, milling unit top/bottom, R1 – R2 pneumatically adjustable, profile scraper, corner rounding unit, liquids before scraper, flat scraper, polisher, max edge tape thickness in roll: 3mm, Hodpow I Sp Sefx Ad Donw max edge thickness for lipping: 12mm, machine in very good condition.

Condition: used, UV dryer Comes from ongoing production Hnodpfx Adov Sauae Dow

Condition: new, Year of construction: 2024, Max. edge thickness 3 mm (optionally up to 8 mm) Min/Max. work piece thickness 8–60 mm* Min. workpiece length approx. 200 mm* Min. workpiece width approx. 80 mm* Feed speed approx. 10 m/min. Hsdpfx Ajg Tu Rksd Dsnw Ready to operate approx. 6 min. Power consumption max. approx. 14 kW Electrical connection 400 V – 3 Ph – 50 Hz Machine dimensions 5,250 x 1,230 x 1,430 mm (LxWxH) Weight approx. 1,700 kg pre-milling head Whispercut radius for corner rounder R = 2mm heatable infeed fence quick change device f.motor corner rounder change motor for corner rounding unit including HM profile cutter radius for change motor R = 1mm Radius Multi-Radiusscraper R2/R1 wheels release agent spraying unit cleaning agent spraying unit protection spraying edge nesting pneumatic 3-point adjustment

Condition: used, Machine vise, sturdy vise, drill vise -Handover: in the current condition as viewed -Stop jaw: repair welding, support surface milled -Machine vice: clamping jaws 140 x 60 mm -Clamping depth: 210 mm -Dimensions: 500/230 / H110 mm Hnsdpfxshhf Aie Ad Dew -Weight: 21.7 kg

Condition: used, Year of construction: 2005, Used machine GM020.0029 Year of manufacture: 2005 AKV 3005 DK-F 8 mm version 1st milling station: Combination Cleaning station Hnedpfx Adjw In R Ej Dow Corner rounding cutter Jointing cutter Surface scraper with extraction Profile scraper Chassis Pneumatic milling adjustment SPS control Preparation for interchangeable tanks

Condition: used, Year of construction: 1992, Used machine Year of construction: 1992 max. workpiece height approx. 40 mm min. workpiece length approx. 250 mm min. Workpiece width approx. 70 mm Feed rate approx. 11 m/min. Ready for operation approx. 4-5 min. Power consumption approx. 11 kW with rapid heating adhesive container Pneumatic roller capping up to 3 mm with cross-cut saw up to 5 mm edge thickness with routing station equipped with combined insert routers on request for radius, straight and chamfer routing Hodpfx Ajwka Shsd Denw Extension arm, can be folded down and extended to the front with chassis L x W x H 3600 x 1400 x 1200 mm Weight approx. 670 kg Availability: at short notice Location: Röllbach

Condition: like new (used), Year of construction: 2020, functionality: fully functional, height adjustment type: mechanical, input voltage: 400 V, space requirement height: 1,200 mm, Edgebander equipped with: calibrators, edging material magazine, interchangeable hotmelt glue pot for EVA or PUR, flush trimming, rounding trimming units. Hsdpfx Ajwy Ugxed Denw

Condition: new, Year of construction: 2025, Space-saving with excellent specifications. Hsdoglfw Nepfx Ad Djnw Your entry point into edgebanding could not be better, as the 3.3m long F2 is both cost-effective and space-saving. And it also has the specifications you require to process perfect edges right from the word go – diamond-tipped cutters guarantee superbly prepared workpieces for edging. The specifications include pre-milling aggregate (up to 3 mm), the top-side fast-heating glue pot, trim saw and combicutter. The F2 can also be optionally fitted with a surface scraper. Get started into perfect edgebanding! Max. edge thickness: 3mm Min./max. workpiece thickness: 8–50mm Min. workpiece length: approx. 160mm Feed speed: 10 m/min. Ready to operate: approx. 3.5 min. Power consumption: ∅ approx. 5.9 kW Electrical connection: 400 V/3Ph/50Hz Table height: approx. 900 mm Machine dimensions: approx. 3,350 x 1,300 x 1,400 mm (LxWxH) Weight: approx. 620 kg Exhaust connection: ∅ 1x140 mm Surface scraper (incl. pneumatic disengagement)

Condition: used, Machine vise, sturdy vise, drill vise -Vise: rotatable -Jaw width: 140 mm -Clamping depth: max. 210 mm -Dimensions: 70/290/H150 mm Hedpfxjb A Nrxj Ad Dsnw -Weight: 32 kg