Used Rotary Actuator for sale (4,080)

Condition: used, Welding turntable – Welding positioner with enclosure Circular welding device Load capacity approx. 50 kg Chuck diameter 300 mm Chuck rotational speed 1.0–15 rpm Power supply 230 Volts, 50 Hz - Spiral scroll chuck with internally stepped jaws - Infinitely variable speed adjustment via potentiometer - Drive via geared motor, rotation direction left - Start via electrical switch - Welding current transmission via slip ring contact - Extraction connection Ø 160 mm Nodpedzp U Ijfx Ag Ieku - Internal lighting Door opening W x H 715 x 1060 mm Internal dimensions W x D x H 780 x 780 x 1100 mm Required space W x D x H 900 x 900 x 2300 mm Weight 190 kg

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Nkodpfx Agsr I E Its Ieu Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: good (used), Machine vice base plate, clamping plate, vise plate, rotary table Nedpfxjykzhvj Ag Ijku -Rotary table: Turntable for vise -T- Round groove: 20 mm, dimensions see photos -Degree display -Dimensions: 350/320/H45 mm -Weight: 20 kg

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.6 - 6.0 U/min bore 60.0 mm motor 230 Volt weight of the machine ca. 56.0 kg range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) Nedpfx Ajxabm Nsg Ieku - Speed display

Condition: new, table diameter 500 mm Nedpfx Agoxabl Ss Ieku table load 300 horizontal kg. table load 150 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.5 U/min bore 90.0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90.0 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt Nsdpfx Agexaatns Ieku - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: new, table diameter 340 mm Nkedjxaafqjpfx Ag Isu table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, 1 x Laser s.r.l. rotary biscuit moulding machine, used to deposit biscuits onto 18'' x 30'' baking trays. NEVER USED IN PRODUCTION. Model - RM-50-ST. Nksdpfx Aoymzz Ijg Ieu Serial number - RMST.1774.06. Date of manufacture - 2006 (never used). Production speed - 4 to 14 pans / minute. Production capacity - 100 to 350 kg / hour. Overall dimensions - 2600mm long x 960mm wide x 1400mm high. Weight - 540 kg. Electrical requirements - 380 V / 50 hz / 3 phase. Supplied with 2 x pallets of trays.

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm Nsdeu Tln Njpfx Ag Isku T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: used, Year of construction: 2003, machine/vehicle number: M321, Technical Specifications & Performance DataThe ACMA GD RC15/6-200 is a rotary filling monoblock with integrated capper and cap sorter engineered for high-reliability industrial packaging. This second hand unit offers dependable performance for a broad range of liquid products in bottles, combining precise filling with efficient capping on a compact carousel platform. Its format range and closure flexibility make it an excellent choice for upgrading a used bottling line or expanding an industrial packaging cell.Manufacturer: ACMA GDModel: RC15/6-200Year of manufacture: 2003Machine concept: Rotary filling monoblock with capper and cap sorterPerformance (500 ml): up to 85 bpmPerformance (650 ml): approx. 40–75 bpmBottle formats: Compatible with 0.5L, 0.65L, 0.75L, 1.0L bottle formatsClosures supported (examples): Screw cap, push-pull screw, refill screw, flip-top screwFilling carousel: 15 valves (as indicated by model designation)Capping turret: 6 heads (as indicated by model designation)Compliance: CE markedAdvanced Automation & Control SystemsThe RC15/6-200 integrates synchronized rotary filling and capping turrets with automatic cap sorting and feeding. Format parts are clearly organized for quick-changeovers across multiple bottle sizes, supporting efficient product transitions and minimizing downtime. Operator-friendly controls coordinate filler and capper timing for stable throughput and consistent torque application.Synchronized rotary filler/capper with integrated cap sorterQuick-change format parts covering multiple bottle sizesProcess stability for repeatable fill accuracy and capping qualityCE-compliant safety logic and guarded access zonesProduction Line Integration CapabilitiesThis filling monoblock integrates seamlessly into complete packaging lines. It can operate inline with upstream bottle handling (e.g., unscramblers) and downstream equipment such as a dedicated trigger capper, labeling machines, and case packing systems. The machine’s format scope from 0.5L to 1.0L supports multi-SKU operations in industrial packaging and beverage production for still products.Inline operation with upstream and downstream conveyorsCompatible with screw-closure ecosystems and downstream trigger cappersFlexible formats: 0.5L, 0.65L, 0.75L, 1.0LSuitable for integration within a used bottling line or new installationsMachine Condition & Maintenance HistoryThis is a second hand rotary filling monoblock presented as operational equipment and ready for deployment after standard line integration and commissioning procedures. The CE mark on the original nameplate underscores compliance with European safety standards at manufacture.Operational used equipmentOffered in ready-for-operation conditionOriginal CE marking presentOperational Performance & VersatilityDesigned for screw-closure applications, the RC15/6-200 supports multiple closure styles including standard screw caps, push-pull, refill, and flip-top variants. Its rotary architecture delivers smooth... Nsdpjymdpzjfx Ag Ijku

Condition: good (used), Rotary pouch filler vacuum sealer. Was packing long life retorted meals in pouches for the armed forces. Nkodpfeyh Rczox Ag Iou

Condition: good (used), Rarely available as a used machine. Leepack auto pouch filling system. Was packing sous vide meals. Njdpfoyh Ragsx Ag Ioku

Condition: used, Manufacturer : Gericke Model : 150 BS Nkedpjykcamsfx Ag Iju Type: Rotary valve for pneumatic transport Direct connection to pneumatic transport pipes Hopper with level sensor: 20 litres Input/Output: DN1 : Ø60 mm DN2 : Ø75 mm Bearing: air purge

Condition: excellent (used), Rotary Table Surface Grinding Machine with Rotating Magnetic Table (Ø 400 mm) and Automatic Feed Grinding Diameter: 400 mm Round Magnetic Chuck: Ø 400 mm Grinding Wheel: 200 x 80 x 78 mm 2 Speeds: 20/40 rpm Grinding Wheel Speed: max. 2850 rpm Max. Distance between Table and Grinding Wheel: 280 mm Throat Depth: 315 mm Fine Increment: 0.01 mm Motor Power: 3 kW Dimensions (L x W x H): approx. 700 x 900 x 1800 mm Weight: approx. 550 kg Nkedpfx Aoykkhleg Iou The machine comes from a training workshop and is in very well-maintained condition. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: excellent (used), functionality: fully functional, load capacity: 4,000 kg, Severt manual column lift and rotation device, including matching perforated table 1500 x 1500 x 200 mm for bolting, included. Optionally available with tooling for perforated table accessory set. Excellent condition (see video). Hydraulically height adjustable, minimum 800 mm, maximum 2400 mm. Load capacity 4000 kg. Perforated table 1500 x 1500 x 200 mm, type 28 mm. Nkedpfxjyli Uyj Ag Isu

Condition: good (used), This filling machine was filling 3 litre tubs of honey. It can be supplied at extra cost with two GlobeTech tub lidding machines which worked in line with it. Nkjdspfdhpspfx Ag Isu

Condition: good (used), Electromechanical actuator for valves, valve drive, actuator, servo motor, air flap actuator, air flap actuator motor, gas pressure regulator, electro-hydraulic drive Nksdeyik Uyspfx Ag Isu -Manufacturer: Deufra, electric actuator, rotary actuator -Type: ASP 25 -Voltage: 400 V / 0.03 kW -Dimensions: 490/310/H175 mm -Weight: 15.6 kg

Condition: excellent (used), functionality: fully functional, Rotary table gearbox with tailstock Nkedpfxswhmdle Ag Isu Rotary table:KITAGAWA TR630H2E04 Tailstock: KITAGAWA TS 630 RN

Condition: new, table diameter 800 mm table load 2 t swivelling range --> 95 Grad Nkedpfxjk Rfwts Ag Ieu max. torque 1250 Nm table rotation speed 2 U/min Working height from to 550 - 1300 vertikal mm Working height from to 650 - 1400 horiz. mm total power requirement 2,53 kW weight of the machine ca. 930 kg dimensions of the machine ca. 1,85 x 1,66 m Video available on our website. Electric 400 Volt Hand control panel Hydraulic-device Hydraulic positioner for permanent turning right + left, tilting, Raise and lower. Various sizes from 1250 - 18000 kg load capacity in the production program. Machine dealer with own stock of 1600 m².

Condition: new, weight max. in kg 2500 kg Working height minimal 350 mm Working height maximum 1850 mm max. torque 3000 Nm 0 1 U/min adjustment speed vertikal 560 mm/min vertical adjustment 1500 mm baseplate diameter 600 mm rotation movement 0,75 kW stroke drive 1,85 kW height of the plant 2505 mm weight 1160 kg Sideros Engineering Head & Tailstock Positioners are used to weld and assembly long and large weldments in many different application fields. Besides the benefits of ergonomics and safety during welding and assembly applications, the revolutionary feature of Syncrolift is the compactness and the portability of both columns, thanks to their dedicated hydraulic jacks. The result is an extreme flexibility in the factory. Syncrolift features two main axis: Electrical elevation/descent, and Electrical 360° left/right rotation. Due to its special design, the column positioner can process very large components. Higher columns (+500/+1000/+1500 mm) for processing components with larger dimensions are available. Special equipment: Double-sided lifting drive, guide rails in 2 m segments, wireless handheld control unit, TCS program control, etc. Thanks to the movable columns, the length of the different workpieces can vary between 1 m and over 20 m. Depending on the weight and dimensions of the component, positioners with load capacities of max. 2,500 kg to max. 40,000 kg are available. Advantages: Improved Safety Proper Ergonomics Improved weld quality Cost savings and profit increase Welding/Assembly procedures repeatability Machine Features: Master and idler column with rotating mounting plates Pallet jacks for column lifting and relocating Servo-motor, ball screw and encoder control for Up & Down motion Servo-motor, gear reducer and encoder control for Rotation LCD display for positioning set up, safety thresholds setting and diagnostic Nkedpfx Aovw Du Uog Iju Automatic load leveling Redundant safeties - servo motor brake, ball screw thread geometry and mechanical Stopper Low maintenance 240/480/600 Volt - 3 phase - 60 Hz In order to configure the system precisely to meet the requirements, we must obtain all relevant information about the workpieces to be processed for the manufacturer's technical office. There we have a list of questions for this purpose.

Condition: like new (used), functionality: fully functional, - TIME AND TEMPERATURE CONTROLLER - Drum diameter: 1.80 m Designed for pulses and vegetables, also suitable for blanching many other fruits. Automatic regulation of the blanching temperature. Nkodpfoynknmox Ag Ieu Internal screw conveyor for blanching fruit. Water recirculation to homogenize the internal temperature.

Condition: excellent (used), - Model: Cristal FM1 Electric - External dimensions (WxDxH): 1250x1575x2280 mm - Door opening: 600x1650 mm - Trolley: 400x800 - 250g baguette capacity: 90 baguettes - 400g bread capacity: 60 loaves - Control panel - Temperature control - Electric power: 43.5 kW - Weight: 825 kg Nkedpfxowxmgzs Ag Ieu - Refurbished equipment: The equipment is prepared upon order; collection and return times are agreed upon at that moment (please request the price after refurbishment)

Condition: used, Turntable, 180° indexing table, rotary table with base made from aluminium system profiles Positioning table, rotary indexing table, 180° BOSCH REXROTH aluminium system profile Rotary plate diameter under the assembly: Ø 220 mm Rotary plate base plate made of steel (L x W x H): 760 x 760 x 20 mm Build height (rotary plate only): 70 mm (from base plate to top of rotary plate) Aluminium frame profile: 60 x 90 mm - Very stably mounted rotary table, manually rotatable - Rotary plate with position query via electric position switch for 1 position - 2 manual index locking positions with release lever, with end stop damper Nkedpfx Agoxf Uude Iou - Electromechanical position locking - Superstructure made of aluminium (painted orange) - Stable base made of aluminium system profile - Height-adjustable feet for leveling Frame dimensions (L x W x H): 760 x 760 x 800 mm Space requirement (L x W x H): 1000 x 950 x 1560 mm Weight: 335 kg Good condition

Condition: like new (used), Compressor, rotary vane compressor, low-pressure gas compressor, gas compressor, Ro-Flo 219M Nkodpfoylh Npex Ag Isu Manufacturer: Ro-Flo Compressors, LLC Type: 219M Serial number: 10568-4 -inlet pressure: 2.3 bar (gauge) -maximum pressure: 7.7 bar (gauge) -volumetric flow rate: 955.8 m³/h -operating speed: 275–640 rpm -maximum operating temperature: 176 °C -overall dimensions: 1450 × 690 × 850 mm -weight: approx. 1,341 kg

Condition: good (used), Year of construction: 2011, Turbo Rotary Rotary filling line Serial: R0061192 Nedpfor Uftrox Ag Isku 2011, Stainless, rotary filling line, consists of Turbo D253P depositor, denester, lid applicator and lid sealer and outfeed conveyor, previously used for filling four pots of sauce in a multipack, tooling dimensions 100mm x 100mm, touch screen controls, 3Ph