Used Rotary Vibrator for sale (6,244)

Condition: used, RMS Technical specifications (manufacturer/model type – no guarantee): Peak force: “according to the manufacturer’s specifications” in the range of approximately 10 kN. Max. acceleration: “up to approximately 1,000 m/s²” Ledpfx Ahjzikc Seaoah Max. speed: “typically in the range of approximately 1 m/s to a few m/s” Components: Control cabinet TGA 022/3 Vibration exciter SW 6507 Power amplifier TG D 9000-000.00 Fan Condition: used Scope of delivery: Vibration testing system as shown in the picture (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Rotary accumulation table Ø 1,000 mm with drive head and adjustable-speed gear motor. The motor drives both the rotary table and the conveyor chain. Direction: CW (clockwise). Ljdpfjz Sdqusx Ahasah

Condition: ready for operation (used), functionality: fully functional, power: 0.37 kW (0.50 HP), DMN BL-150 Rotor: stainless steel (scraping blades) Housing: steel Lsdpfx Ahjz Rpn Usajah 2.5 liters per revolution 20 rpm Motor: 0.37 kW 1380/20 rpm 1.24 A 4 units available

Condition: good (used), functionality: fully functional, Internal article number: 26090 Rotary table top Lajdpfx Ahsz Hauvjajh Diameter: 380 mm Direct and indirect division possible Well-maintained original condition Minor milling marks on the surface, but these are not deep. The rotary table comes from an educational institution and is in a well-maintained condition.

Condition: good (used), functionality: fully functional, Internal article number: 26091 Ljdsz Ha Aaspfx Ahajah Round table cover Diameter: 300mm With optics. No connection cable included. Well-maintained, original condition. The round table comes from an educational institution and is in good condition.

Condition: excellent (used), Manual rotary table Ø 450 mm Total height: 150 mm Base dimensions: Length 580 mm x Depth 500 mm Weight: approx 150 kg In very good condition Lajdpfx Aez I A Inshash

Condition: excellent (used), Catalog number 8012 TECHNICAL DATA - inlet width 420mm - inlet height 270mm - shaft width 410mm - shaft diameter 450mm - number of blades: 2 rows, 7 pieces each - screen dimensions 50x70mm - toothed pull shaft (bottom) - lower shaft motor 1.1kW - toothed pull shaft (top) - upper shaft motor 1.1kW - main motor 45kW - forward/reverse feed - automatic reversing - additional screen 10x10mm - extraction nozzle diameter 330mm - vibrating screen 1.1kW, 3300x400mm - overall dimensions of the vibrating screen 3340x630x620mm - machine dimensions (length/width/height) 2310x1040x1000mm - weight approximately 1800kg Lodezx Sgkspfx Ahajah ADVANTAGES - German production - automatic reversing (with adjustable settings) - with 3300mm vibrating screen - DTR documentation – used shredder, good condition Net price: 66900 PLN Net price: 15558 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, RMS Laedpfx Aozdtbmehash RMS vibration exciter with power amplifier and cooling fan Vibration exciter SW 3009 Tightening torque: 21 Nm Insertion depth: 15 mm Power amplifier TGA 6014 3 x 380V / 50Hz / 35A / 23 kVA Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone. Written orders can be placed via email or fax.

Condition: used, RMS RMS vibration exciter with power amplifier and cooling fan Vibration exciter SW 1511/2 Power amplifier TGD 3000-000 00 Input: 3x400V-50Hz, 14.5 kVA Lajdezdry Ujpfx Ahaeh Cooling fan SWG 108 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, IMV Type: i240 + Amplifier SA3M + Fan Dimensions: Power amplifier: SA3M-i40EM-CE WxHxD 580 x 1950 x 850 mm Vibration exciter: i240 WxHxD 1234 x 997 x 720 mm Technical data of the system: Armature mass: 20 kg Armature diameter: 290 mm Armature resonance: 2300 Hz Permissible eccentric moment: 850 N·m Frequency range: 0-2600 Hz Maximum force: 24 kN (Sine and random) 48 kN (Shock) Maximum acceleration: 1200 m/s² (Sine) 840 m/s² (Random) 2400 m/s² (Shock) Maximum displacement: 100 mm p-p Maximum load capacity: 400 kg Environmental conditions: Temperature 0-40 °C, humidity 0-85 %RH Maximum output power: 30 kVA (SA3M-i40EM-CE) + Shaker armature 290 mm Usable up to 2000 Hz Weight: 410 kg (SA3M-i40EM-CE) Lajdpfozimf Asx Ahajh Total weight approx. 2800 kg Condition: used Scope of supply: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.

Year of construction: 2022, condition: good (used), 1 x PA Eclipse-R Rotary Tray Sealer Laodjz Ehfyopfx Ahash Gas Flush Year: 2022 Serial Number: ECR-MC-00046 Suitable for MAP. Single phase. New condition.

Condition: used, Year of construction: 1988, Technical details: table diameter: 500 mm table height: 150 mm rotatability of the table - manual/mechanic: 360 ° weight of the machine approx.: 110 kg dimensions: 800 x 800 x 180 mm Rotary table operation by handwheel Operation Coupling connection Ø 20 x 32mm Lsdou N D I Aepfx Ahajah Foot mounting: 2x clamping groove Ø 19 x29mm Equipment: 8-sided top plate, size 665mmx23mm, 3x through-holes Ø 30mm in the centre Accessories: 4x eyebolts *

Year of construction: 2026, condition: used, General information Year of manufacture: 2026 New: Yes Colour: Grey Reference number: 5 Weights Empty weight: 650 kg Functional Dimensions of cargo space: 120 x 80 x 60 cm CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Lajdpeyya Hdofx Ahaoh Other information Delivery terms: EXW Production country: KR Additional information Please contact Ö. Inalkac for more information We offer you new excavator mounted Vibration Compactor Plates. We have 4 different models. ACP15 excavator mounted compactor which is 600kg and fits on excavator 8-17ton. Contact us for details. We have compactors in stock from 220kg to 930kg. PLAQUES VIBRANTES, VERDICHTERPLATTEN, PLACAS VIBRATORIAS, PIASTRE VIBRANTI, VIBRATING PLATE COMPACTORS, FARFURII COMPRESOR, TRILBLOK, ЦОМПРЕССОР ПЛОЧЕ, KOMPRESOR PLOČE, KOMPRESSORPLATTOR, COMPRESSOR PLATER, COMPRESSORE PLATES, КОМПРЕСОРИ ТАБЕЛИ, KOMPRESSZOR PLATES, PLACAS COMPRESSOR

Condition: used, Horizontal rotary table Shelf diameter: Ø 700 mm x Height 160 mm Total external diameter: Ø 790 mm Graduation in degrees Laodpfx Asz Nht Tohaeh Rotation by vernier

Condition: used, For inquiries regarding the attachment, Mr. Herden is available to assist you (by phone). Seppi M. BMS 125 Forestry Mulcher / incl. rotary actuator / Year of manufacture: 2024 / DEMO machine / in stock & immediately available / very good condition Price: €33,490.00 net / €39,853.10 gross Working width: 125 cm Total width: 156 cm Depth: 111 cm Height: 85 cm Weight: 1,285 kg - Ideal machine for mulching in hard-to-reach locations such as along roadsides, riverbanks, steep slopes, or for clearing gas and power lines - Mulches shrubs and wood up to 30 cm Ø - Suitable for excavators from 13 to 30 tonnes - For mounting to various adapter plates - Drive designed for hydraulic motor depending on the carrier machine’s flow rate - Indirect V-belt drive with 5 V-belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge along the entire length of the hood - Front chain guard - Rear chain guard - Height-adjustable skid shoes in sandwich design, reinforced with a carbide plate Ljdoyltvbepfx Ahasah - Colour: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools and tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 OPT 465 M-BOOST angle-axis piston motor - With automatic displacement regulation 60–80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60–80 - Required pressure in bar (min-max): 200–350 - Required hydraulic flow rate: 80–170 l/min OPT 372 hydraulic 190° rotation device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood Optional: Verachtert CW20/30/40 adapter plate incl. bolts and installation = €2,510.00 net The rotor requires 3 hydraulic lines: supply, return, and leakage oil. An additional hydraulic circuit is required for the hood. The unit is supplied without hoses or connectors. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse has a very large selection of various Seppi M. products that are ready for immediate delivery! Mr. Herden is happy to assist you by phone. Upon request, we can also provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with a stock of 800 used vehicles, we are one of the largest commercial vehicle dealers in...

Condition: used, Manufacturer unknown Shaker Fixture Cube / Clamping Cube Aluminum Shaker Fixture Cube, approx. 240 × 240 × 240 mm Professional clamping cube for vibration testing systems, environmental testing technology, vibration tests, and testing laboratories. For sale is a used Shaker Fixture Cube made of aluminum. The clamping cube is suitable for the flexible attachment of test specimens, measurement setups, and fixtures on vibration testing systems. The solid aluminum construction offers high rigidity Ledpfxszp E Dks Ahasah and is ideal for vibration tests, environmental testing technology, mechanical engineering, as well as research and development laboratories. Technical data: Manufacturer: Unknown Material: Aluminum Type: Shaker Fixture Cube / Clamping Cube / Fixture Block External dimensions: approx. 240 × 240 × 240 mm 4 precision mounting holes, Ø approx. 85 mm Central through-hole Threaded holes on all side surfaces Precision-machined clamping surfaces Robust industrial design Weight: 30 kg Features: Solid aluminum construction Precision-machined clamping surfaces Threaded holes on all side surfaces Four large mounting holes Central through-hole Suitable for individual test setups High rigidity with a compact design Accessories as shown in the pictures Application areas: Vibration testing systems Vibration testing Environmental testing technology Test stands Metrology Mechanical engineering Special machine construction Automotive Aerospace Research and development Testing laboratories Industry Scope of supply: Aluminum Shaker Fixture Cube Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping via parcel service or freight forwarder is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by phone.

Condition: used, Year of construction: 1987, Technical details: Lasdpfju Nkm Ejx Ahaoh table diameter: 500 mm table height: 70 mm rotatability of the table - manual/mechanic: ja ° weight of the machine approx.: 300 kg space requirements of the machine approx.: 0,92x0,650x0,19 m T-slots are 3 pcs longtitudinal and 1x transverse in the middle existing a=18mm h=30mm b=30mm c=13mm *

Condition: good (used), Equipment: foot remote control, The rotary table is motor-driven and features a foot switch; the clamping range can be adjusted to suit any component. Upon request, a perforated table of any size can be supplied. 3000 kg load capacity, motor-driven braking system. Lajdpfx Aoz Hvl Rshajh One side is driven, the other side rotates passively. Center height from the floor: 1000 mm, mounting plate size: 700 x 450 mm. Two sets of the same size are available.

Condition: used, Johansson Type: Johansson Cordimatic 7000 Coordinate Measuring Machine Laodpfx Aszd N Shjhajh The coordinate measuring machine for measuring large workpieces. Johansson Cordimatic 7000 measuring machine with Renishaw retrofit (control, rotary/swivel probe & probe changer library) Johansson Cordimatic 7000 measuring machine with Renishaw rotary/swivel head PH10T Measuring range: 28" x 17" x 13.5" Granite table size: 42" x 28" x 8" Equipped with: Computer Metrologic 1 joystick pendant control Metrologic software manuals Joystick and control from RENISHAW SPA2 servo power amplifier UCC2 controller Condition: used Scope of delivery: (See image) (Changes and errors in technical data and information are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), functionality: fully functional, Equipment: foot remote control, Excellent condition Rotating device with adjustable height, featuring joints on both sides (the component does not need to be aligned due to the joints) Motor-driven, with foot pedal, adjustable clamping range for your component Dimensions: Minimum height 550mm, maximum height 1300mm Laodpfxez Hvuro Ahash Mounting plate 440 x 300mm Base dimensions per side approximately 1600mm x 1200mm Optionally, a perforated table or a component of any size can be clamped 3000 kg load capacity, motor-braked One side driven, the other side rotates passively.

Condition: excellent (used), ROTARY TABLE D1100 2STAT – with VC400 rotary unit Lajdpjz Rxf Aefx Ahaoh Additional specifications: Max. load: 2.5 t The weight of the rotary unit, including the hydraulic manifold, is approx. 2,000 kg.

Condition: used, Compact tray sealer with rotary table Laodpfxoz Nddms Ahaeh This sealer by UK manufacturer Packaging Automation (PA) works with a rotary table: you place the trays in the tool at the front, the table turns them under the sealing head and the sealed trays come back to the front. The fitted tooling takes two trays per cycle. Film runs from the reel at the side. The control panel reads 182/5. We did not find a legible rating plate with the year of manufacture. The machine stands on castors. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Rotary tray sealer Tooling: 2 trays per cycle Controls: Text display with function keys Construction: Stainless steel, base on castors

Year of construction: 2022, operating hours: 20 h, condition: like new (used), Punch and die tooling for tablet presses with EU 25 tooling format. Lodpfxjzxqbtj Ahaeah Consisting of: 35 upper punches 35 lower punches 35 dies Tablet shape: 21 x 10 oval

Condition: used, Machine: Rotary piston pump 10.000 ltr/h cooled Lsdpfez Ri Tkox Ahaoah

Condition: used, BAT Shaker Fixture Cube Magnesium Shaker Fixture Cube 400 × 400 × 400 mm Professional fixture cube for vibration test benches, environmental testing technology, vibration tests, and testing laboratories. For sale is a used Shaker Fixture Cube made of magnesium. The fixture cube is suitable for the flexible mounting of test specimens, measuring setups, and fixtures on vibration test benches. The robust magnesium construction offers high rigidity while maintaining a low weight and is used in testing and development laboratories. Technical data: Manufacturer: BAT Material: Magnesium Type: Shaker Fixture Cube External dimensions: approx. 400 × 400 × 400 mm Threaded grid on all sides Several large through-holes for mounting Robust, precision design Equipment: Magnesium construction Precision-machined mounting surfaces Threaded holes on all sides Large corner holes for mounting Suitable for individual test setups Accessories as shown in the pictures Application areas: Vibration test benches Vibration testing Environmental testing technology Automotive Aerospace Research and development Testing laboratories Industry Scope of delivery: Magnesium Shaker Fixture Cube Accessories as shown in the pictures Condition: Used Visual condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Lsdpfxszkhxte Ahajah Shipping via parcel service is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.