Used Saw Splitting Machine Spq300 for sale (65,430)

Condition: new, Used MACC 320 MS Semi-automatic sawing machine Good New " CE " Data sheet attached. Ready for delivery unless sold The basic characteristics of the machine (stiffness of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied to avoid the belt yielding, increase the duration, improve the linearity and the cutting time. Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Accident prevention safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size 0.06 kW electric pump for belt cooling Operation: start of the cutting cycle by start button, the machine: 1. closes the vice and drives the band motor 2. lowers the arc for cutting 3. the bow returns to the starting position 4. stops the band motor 5. opens the vice Possibility of manual cutting ACCESSORIES ON REQUEST : SINGLE-PHASE motor 69 m/1′ Cpsdpjfibfaefx Afnou Speed variator from

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium size with high efficiency and excellent cutting precision. Cpodpfxefibd To Afnou The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt drive with two-speed motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control Accident prevention safety device on the flywheel cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Adjustable stop for cuts of the same size Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Jaw height 200 mm Clamp jaw length 185 mm Worktop height 760 mm Machine weight 820 kg

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium and large dimensions with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt control with inverter driven motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control. Accident prevention safety device on the fly cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Clamp jaw height 250 mm Jaw length 200 mm Worktop height 760 mm Cpedpfx Afefh R Tueneu Machine weight 1250 kg 12260 N

Condition: new, Good brand new No. 1 available for immediate delivery! Warranty " CE " Made in Italy Cpjdpsfibfgjfx Afneu Cutting capacity : 0° = round tube mm 230 - square mm 220 - rectangle mm 170 x 300 45° = round tube mm 200 - square mm 180 - rectangle mm 180 x 230 60° = tubular round mm 130 - square mm 120 - rectangle mm 110 x 130 TECHNICAL DATA AND STANDARD EQUIPMENT: Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Vice with rapid locking device Safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size Low voltage system 24 V 0.06 kW electric pump for belt cooling The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied in order to avoid belt yielding, increase its life, improve linearity and cutting time.

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tilting saw blade and sliding table made of anodized aluminium Item number: 5504933 Brand: Holzkraft TECHNICAL DATA Cedoxw N N Hjpfx Afnopu Dimensions and Weights Weight (net): approx. 690 kg Dust Extraction Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (main motor): 7.0 kW Rated duty cycle (main drive): S6 Duty cycle (main drive): 40% Sliding Table and Worktable Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 3200 mm Edging length: 3200 mm Saw blade tilting range: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note max. cutting height: independent of scorer Saw blade diameter: 400 mm Note saw blade diameter: independent of scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm EQUIPMENT Scoring unit with separate scoring motor Anodised aluminium sliding table Handle for sliding table On/off switch on sliding table for main and scoring blade motors Edging frame Material roller on edging frame Rip fence with round bar guidance Stops: two professional folding stops Edging shoe Excenter clamp Table extension Table width extension Pendulum-type saw blade guard Motorised height adjustment and tilt of saw unit, digital tilt angle display Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Article number: 5504932 Brand: Holzkraft Cjdpfx Afsxw N Sbsnopu Heavy-duty worktable made of strongly ribbed cast iron – for maximum stability and durability Robust welded steel base – ensures high torsional rigidity and vibration-free operation Precision sliding table made of anodised aluminium – smooth running via high-quality ball contact system Carbide guide rails – for lasting precision and minimal maintenance Tilting cast iron saw unit with double segment guide – precise zero-point tilt for highest cutting accuracy Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding table – for quick and precise mitre cuts Scoring unit with powerful separate drive motor Equipped with high-quality crosscut fence – with heavy-duty telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and Weights Weight (net) approx. 670 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Rated output (motor power): 7.0 kW Duty type (main motor): S6 Duty cycle (main motor): 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3200 mm Crosscutting length: 3200 mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note on max. cutting height: Independent of the scorer Saw blade diameter: 400 mm Note on saw blade diameter: Independent of the scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Features Scoring unit: with separate scoring motor Anodised aluminium sliding table Handle for sliding table Crosscutting fence Material roller on crosscutting fence Rip fence: with round bar guide Stops: Two professional folding stops Crosscutting shoe Eccentric clamp Table extension Table widening Saw blade pendulum guard Manual height adjustment and tilting of saw unit Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Panel saw HOLZ-HER 1255 SECTOR pro - Exhibition machine - Cutting height 2,200 mm Cutting length 5,300 mm Vertical perfection from HOLZ-HER The vertical panel saws from HOLZ-HER combine proven technology from over 50 years of experience and a rock-solid design that offers you a unique price-performance ratio. offer you a unique price-performance ratio. Your advantages: - Fully welded frame Extremely high rigidity - Precise cutting quality - Finished cut for immediate edge banding - Powerful saw motor with 4 kW output - Space-saving panel layout with a installation area from 4 m² - Smooth and ergonomic operation TRK extraction system (optional in all CE countries): Workstations must meet the highest requirements when it comes to health and safety. HOLZ-HER saws are among the cleanest and safest in the safest in the world. Accessories The extensive range of accessories extends from convenient digital dimension displays through to our our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting panel-shaped wood materials wood-based materials such as chipboard, MDF, veneer panels, multiplex, etc, veneer panels, multiplex etc. Basic machine: Completely welded frame with extremely high rigidity. Precise guidance of the saw beam / saw unit saw unit for an accurate cut. Manual feed feed for vertical and horizontal cutting. Cutting depth: max. 60 mm Saw beam: Sturdy saw beam guided on precision guides. Pneumatic locking of the saw beam at the top and bottom. Electrically monitored in vertical cut Saw unit: Smooth and ergonomic operation for plunging and and removal of the saw unit. Immersion lever can be lever can be folded down in the upper position for precise immersion of the saw unit. Generously dimensioned lever for easy pivoting. Housing cover opens the complete opens the complete saw unit for easy tool change change incl. ProLock quick-action chuck. Light cut-out: Riving knife can be retracted. Control panel: Efficient operation of the machine. Ergonomically positioned at eye level. Codpfeu R Syisx Afnopu Lower workpiece support: Sturdy, wear-free stainless steel support. Support up to the cutting line: Narrow workpieces cannot tip or fall through Extraction: Effective extraction with two connections: Saw unit Ø 120 mm, frame end Ø 100 mm (with TRK variant) Lifting roller transport system: Manually liftable and lowerable rollers for easy and and gentle panel transport. Measuring tape: For displaying dimensions for horizontal cutting with three manual dimension displays: Absolute dimension from the lower workpiece support Absolute dimension from the middle workpiece support Serial cuts from the top edge of the panel This offer is an equipment package. The following items and options are already included in the price: - Sliding grid - Manual longitudinal stop for vertical cutting - Digital dimension display for horizontal cut - 3 adjustable stop points in the saw beam - TRK SH 2.200 suction device - Strip stop for recurring horizontal cuts - new exhibition machine -

Condition: new, ALTENDORF HAND GUARD sliding table saw Edition TwinFlex with 12" touchscreen -exhibition machine- Including: - ALTENDORF HAND GUARD sliding table saw Edition TwinFlex with 12" touchscreen Optical protection system: Two cameras collect data for hand detection from a wide area around the saw blade. As soon as hands are detected entering the area a quarter of a second, the saw unit is quickly lowered and quick stop of the saw unit within a quarter of a second. EDITION TWINFLEX - Double roller carriage 3,000 mm - Saw blade projection 150 mm - Motor power VARIO 5 kW (6.8 HP) Cedpfx Aeu R S Eljfnepu - Tilting on both sides - DIGIT LD angle mitre fence, cutting to length up to 3,200 mm - CNC rip fence, cutting width 1,000 mm - On/off switch on the double roller carriage - Template holder Included: - Surcharge for motor power 6.5 kW (8.8 hp) ALTENDORF with VARIO, for tilting on both sides Included: - Scoring unit 2-axle, 2-sided, ALTENDORF with motorized height and side adjustment Scoring blade height programmable with quick lowering and quick raising, Drive motor 0.75 kW (1 hp), 8,200 rpm. Including: - RAPIDO 180 mm ALTENDORF scoring system for tilting on both sides Includes: - LED lighting on ALTENDORF scoring unit Included: - Double roller carriage 3,400 mm, ALTENDORF Including: - CNC parallel fence, 1,300 mm, ALTENDORF Included: - Camera arm, swiveling ALTENDORF Includes: - Front support roller ALTENDORF Width 300 mm Includes: - ALTENDORF air cushion table Includes: - Table top extension 840 mm ALTENDORF with air cushion - new exhibition machine -

Condition: new, Panel Saw ALTENDORF F 35 Type 3 - 1000 -Exhibition Machine- 5.5 kW (7.5 HP), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC rip fence, cutting width 1,000 mm, Angle-mitre fence 3,450 mm, without length compensation, Table extension/table widening, Cjdow Imptspfx Afnjpu High-quality CDF surface ----- Technical Specifications ----- Tilting range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, Max. saw blade Ø: 450 mm, Motor power: 5.5 kW, Screen size: 15 inch, Table height: 910 mm, Extraction port Ø: 80 + 120 mm - New exhibition machine -

Condition: new, ALTENDORF WA 6 sliding table saw - Exhibition machine - manual height adjustment, double roller carriage, scoring unit, pivoting, outrigger table, angle mitre fence, automatic brake, can be lowered below table height ----- Technical data ----- Swivel range: 0 - 45 °, Cutting length: 2,500 mm, Cutting width at rip fence: 1,000 mm, max. cutting height: 100 mm, max. saw blade Ø: 315 mm, Swivel range mitre fence: up to 49 °, speeds: 4,200 rpm Motor power main motor: 5.5 hp / 4.0 kW, Scoring motor power: 0.5 hp / 0.37 kW, Work table height: 910 mm, Extraction nozzle Ø: 1 x 100 / 50 mm each, Weight: 450 kg Cpsdpeu R Sx Esfx Afneu - new exhibition machine -

Condition: new, HOLZKRAFT sc 2c sliding table saw - Exhibition machine - pivoting, rip fence with fine adjustment ----- Technical data ----- Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Speeds: 4,000 rpm, max. saw blade Ø: 315 mm, Cjdpfx Aju R Sy Nofnjpu Cutting width with rip fence: 900 mm, Cutting height 90/45°: 100 / 79 mm, cutting length: 1,600 mm, Swivel range: 90 - 45 °, Dimensions (LxW): 1,020 x 325 mm, Weight: 295 kg - new exhibition machine -

Condition: new, HOLZKRAFT sc 3c 26 sliding table saw - Exhibition machine - pivoting, rip fence with fine adjustment ----- Technical data ----- Trimming length: 2,600 mm, max. cutting height 90°: 100 mm, max. cutting width to the left of the saw blade: 2,310 mm, Cutting width with rip fence: 900 mm, max. saw blade Ø: 315 mm, Main saw blade speed: 4,000 rpm, Motor power 400 V: 5.0 kW, Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Table dimensions: 840 x 560 mm, Format sliding carriage dimensions: 270 x 124 x 2,600 mm, Transport width: 900 mm, Weight: 385 kg - new exhibition machine - Cedpfeu R S Dhjx Afnspu

Condition: new, ALTENDORF F 25 sliding table saw, type 1 -Exhibition machine- Double roller carriage swiveling man. Height and swivel adjustment Rip fence with man. fine adjustment Csdpfxou R S Dbo Afnepu Angular mitre fence Large extraction hood Basic scoring unit with LED lighting ----- Technical data ----- Swivel range: 0 - 46 ° Carriage length: 3,200 mm Rip fence: 1,000 mm Cutting height: 100 mm Max. saw blade Ø: 315 mm Crosscut fence extendable up to: 3,450 mm Speeds: 3,600 / 4,200 rpm Motor power: 5.5 kW (7.5 hp) Work table height: 880 mm Suction nozzle Ø: 120 + 80 mm - new exhibition machine -

Condition: excellent (used), Year of construction: 2024, operating hours: 193 h, functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 340 mm, cutting width (max.): 335 mm, workpiece length (max.): 6,000 mm, milling spindle speed (max.): 6,000 rpm, section length (max.): 6,000 mm, TECHNICAL DETAILS - Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control: eluCAM graphical, Windows XP user interface Workstations: 2 independently operating stations Turret tool changer: 8 tools, servo motor driven Tool holder: BT 30 Disc mill diameter: 180 mm Tool length: 150 mm (from point of attachment) Travel distances Travel X-axis: 7,200 mm (without end-face processing), 7,080 mm (with end-face processing) Travel Y-axis: 480 mm Travel Z-axis: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-/Z-axis: 30 m/min Positioning accuracy: ±0.1 mm/m Cjdswprmzspfx Afnopu Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Air connection: min. 7 bar Air consumption: 100 l/min Electric connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT two independent workstations with light barrier and camera system Non-swiveling inclined milling head for 2 tools, Er20A, up to 18,000 rpm Inclined milling head swiveling 4 × 90°, Er20, up to 22,000 rpm Inclined milling head non-swiveling for steel, Er20A, 1,554 rpm Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts Carbide saw blade Z=100, D=300 mm, cutting width 3.2 mm Tool holder i=1:3.86 for 18,000 min⁻¹, ER25 Cooling/lubricating unit for steel processing Disc milling holder BT30, D=16 mm Disc cutter D=92 × 6 mm, Z=14, D=16 mm, carbide teeth TECHNICAL DETAILS - Double Mitre Saw Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Saw blade diameter: 420 mm Cutting angle (rotation): pneumatically adjustable 90° and 45° inside, intermediate angles and 22.5° acute manually adjustable with digital display Cutting angle (tilt): pneumatically adjustable 90° and 45° inside Saw direction: saw blades move from bottom to top Control Control type: E580/1 Length adjustment: automatic with positioning control Saw blade tilt: pneumatically automatic between 90° and 45° Positioning accuracy: ±0.1 mm/m Positioning: pneumatic locking Operating system: Windows Saw unit Speed: 2,800 rpm Power per motor: 4,000 W (5.5 HP) Saw blade cooling: available Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Supply Electric connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and Weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg EQUIPMENT Automatically closing protective covers Electronic positioning of the heads with +/- 0.1 mm/m accuracy Digital angle display for manually adjustable special angles Pneumatically adjustable saw blade rotational and tilt angles Operation via Windows control with 8.4" display and handwheel Cooling system for saw blades included Saw unit with bottom feed for optimal cutting force

Condition: new, Year of construction: 2026, Model: Electrical, Option with swingarm Tooth form: All common tooth forms Saw blade width: 25 - 350 mm (double Side teeth and variable pitch) Teeth:0-60T/min Coolant:150-300 I/min Tooth pitch: 10 - 60 mm Cpjdpox Uw D Asfx Afneu Tooth height: 0 - 30 mm Tooth angle: 0 - 40° Sharpening speed: 0-60 teeth/min Grinding wheel: 300x30mm, 8 - 13mm thick Grinding wheel motor: 3.0 kW E-Motor Water tank volume: 265 liter

Condition: new, Year of construction: 2026, Model: Electrical, Option with swingarm Tooth form: All common tooth forms Saw blade width: 25 - 350 mm (double Side teeth and variable pitch) Teeth:0-60 Z/Pm Coolant:150-300 l/min Tooth pitch: 10 - 60 mm Tooth height: 6 - 30 mm Tooth angle: 0 - 40° Cjdpfxox Uw Dpj Afnspu Sharpening speed: 6 - 10 teeth/min Grinding wheel: 300x30mm, 8 - 13mm thick Grinding wheel motor: 2,8 kW E-Motor Water tank volume: 165 liter

Condition: new, Year of construction: 2026, Model: Mechanical with touch panel Tooth profiles: All common tooth profiles Blade width: Band saws up to 230mm Blade thickness: 0.6 - 6.0 mm Cpsdpfx Aex Uwzhsfnsu Tooth pitch: 0 - 60 mm Tooth height: 0 - 25 mm Clamping angle: 0 - 40°

Condition: new, Year of construction: 2026, machine/vehicle number: 2026, Wet sharpening machine for Frame Saws Cpsdpfx Asx Uwzbsfnou

Year of construction: 2022, condition: as good as new (ex-display), DROSTE Welding Table for band saw blades: for new blades and for welding cracks ST260: Automatic with TIG or MIG System Automatic welding feed programable Annealling System Preheat plate Technical Details: Csdpeuh Sp Nsfx Afnjpu Blade width: 30 – 260 mm Blade thickness: 0,6 – 2.0 mm

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: ADS550×5000, Power supply: 380–420 V / 50 Hz Total power: 5.5 kW Saw motors: 2 × 2.2 kW Saw blade: Ø550 mm Max. cutting length: 5000 mm Cpedpfx Aox R U Epsfnsu Min. cutting length: 360 mm at 90° Cutting angles: 45° and 90° Repeatability: ±0.1 mm Air consumption: 60 L/min (0.5–0.8 MPa) Fully CNC controlled Two saw heads that can operate independently or synchronously Automatic positioning of the moving saw head via servo drive Automatic height measurement system for increased precision at 45° Touchscreen control with clear interface Integrated label printer (traceability & workflow) Infinitely adjustable saw feed Very stable and heavy machine base

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit. Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: - Horizontal loading magazine model HLM - 4-strand timing belt conveyor - 6 compartments, each 285mm wide, for profile feeding - Maximum material height according to the saw cutting area; round material up to max. diameter 130mm - 3 sliding strips between timing belts as additional support - Profile length min. 2,700mm, max. 6,500mm Cpodpfx Ajxvbvvofnju Saw: - Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA - Saw blade diameter max. 500mm - Continuously variable speed adjustment - Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front - Siemens S7-300 control system with touchscreen - Reversing device with five-fold stroke up to max. 5,000mm - Electric material feed 3 – 1,000mm (single stroke) - Cutting gap extension on both sides - Pneumatic unloading slide - Scrap flap after saw for offcuts / remains - Cut length depending on profile, from 8mm - Menzel minimum quantity lubrication system - Clamping pressure regulation - Two extraction nozzles for chip extraction Unloading: - Table size 1,500mm x 2,500mm - Pneumatic cross pusher

Condition: excellent (used), 5.5 kW motor Scoring unit Cpsdpew U Th Asfx Afneu Table length: 200 cm Ground clearance: 133 cm

Condition: reconditioned (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: GM010.0396, cutting length (max.): 3,200 mm, cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, table length: 840 mm, power: 5.5 kW (7.48 HP), Factory-refurbished Altendorf F45 with ProDrive control system! TECHNICAL DETAILS Cutting Data Cutting length: max. 3,200 mm Cutting width at rip fence: 1,300 mm Saw blade diameter: 550 mm Saw blade projection at 90°: 204 mm Saw blade projection at +45°: 141 mm Carriage length, double roller carriage: 3,200 mm Table Data Table length: 840 mm Performance Data Power output: 5.5 kW MACHINE DETAILS Machine height: 910 mm Motor power: 5.5 kW (7.5 HP) Dust Extraction Connection Extraction, top: Ø = 80 mm Extraction, bottom: Ø = 120 mm Negative pressure: 1,200 Pa at total suction port, Ø = 140 mm Air consumption: v_min = 1,110 m³/h at 20 m/s Air Cushion Table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Lighting Continuously variable speed control Scorer unit Cpedpfjxc Uq Hex Afnju LED lighting 3-axis scorer including park position On/off switch on the double roller carriage Angle/miter fence Parallel stop DIGIT X 1,300 mm Front support roller Second support on the double roller carriage

Condition: as good as new (ex-display), functionality: fully functional, Displayed price is for model 405MAN. For the best price, please contact us directly by phone. Panel saw in stock with parallel guide (1250mm), fitted with a scorer. The A405A/NC single-axis panel saw is the ideal machine for high-precision cutting of sheet materials for kitchen cabinets, furniture, and more. The NC rip fence provides operators with the added convenience of setting the saw width automatically via a control panel. This saves time and delivers a high level of accuracy and repeatability. The 3200 mm sliding table is made of precision aluminum extrusion and runs on precision linear guide rails. Cjdpfsxxyd Rox Afnjpu PICK-UP: Almelo, Netherlands Phone:

Condition: used, Year of construction: 1959, functionality: fully functional, Sharpening machine for sharpening frame saw blades. Inspection possible. Cjdpfox Tak Nsx Afnopu