Used Scale Bar for sale (16,231)

Condition: ready for operation (used), bar length: 4,400 mm, overall weight: 900 kg, Bar diameter Ø 5-45 mm Magazine capacity 280 Min. bar changeover time 27 sec. Feed rate 150 mm/sec., adjustable Return speed 950 mm/sec. Supply voltage 230/400 Volt Installed power 3 KW Compressed air 6 bar Weight 900 kg Ksdpfx Apsw Rfkbj Dodu

Condition: like new (used), Year of construction: 2022, pressure: 26 bar, Steam boiler, 12,000 kg/h, 26 bar, with economizer, in container Brand: HKB Dual fuel burner: Weishaupt Kodjzzyhbopfx Ap Dsdu Year of construction: 2022 Chimney: yes, included, 10 m Blowdown tank: yes Control box PLC: yes, included Pump set: no, not included in this scope Dimensions of insulated container: 13.26 x 3.54 x 3.80 m Weight: 46 tons

Condition: good (used), Year of construction: 2008, Parts shown by hand not come. Kedpfx Aezl D Hpsp Djdu

Condition: used, Hydraulic unit, HAWE hydraulic unit Type: HC 2L/1.1-1B/400-0-31F-G24 Hydraulic pump in the tank Flow rate: 1.1 L/min Hydraulic pump power: 0.9 kW Hydraulic pump: 380 Volt, 50 Hz Hydraulic pressure: max 400 bar - 1 solenoid valve, 24 Volt Weight: approx. 12 kg Good condition Kodszpbqgopfx Ap Dedu

Condition: used, Hydraulic power unit, KOSMEK hydraulic unit Pneumatic pressure converter Type: PL 087 Operating pressure: 100 bar Flow rate: 1 liter/min Tank capacity: approx. 4.5 liters - pneumatic drive - hydraulic connection Space requirement L x W x H: 250 x 140 x 290 mm Weight: 16 kg in good condition Kjdpfxezpbqts Ap Dodu

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 280 kg, total length: 1,400 mm, total width: 650 mm, total height: 1,200 mm, power: 7.5 kW (10.20 HP), operating pressure: 10 bar, pressure (min.): 6 bar, pressure (max.): 10 bar, noise level: 60 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Highly efficient screw compressor with 7.5 kW / 10 bar (also available as a 4 kW version) complete 4-in-1 unit frequency-controlled servomotor 270-liter pressure tank refrigerant dryer fine filter New machine, delivery time approximately 1 week We would be happy to demonstrate the machine to you at our facility. Highly efficient, permanent magnet servomotor Frequency-controlled / load-dependent for clean and dry compressed air suitable for laser applications with animated color display single-stage screw unit air-cooled durable and low-maintenance Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria Kdedpfx Aszpfwwsp Dou technical data (approx.): Length: 1.40 m, Height: 1.20 m, Width: 0.65 m Weight: approx. 280 kg Pressure: 10 bar Flow rate: approx. 0.9 m³/min at 10 bar Noise level: 60 ± 2 dB(A)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 15000876, overall weight: 1,300 kg, power: 2 kW (2.72 HP), controller model: HBG 10, workpiece length (max.): 3,000 mm, bar passage: 60 mm, TECHNICAL DETAILS Workpiece length, max.: 3,000 mm Guide channel diameter: approx. 60 mm MACHINE DETAILS Control panel: HBG 10 Drive power: 2 kW Weight: 1,300 kg Kedpfxjzqcv Ts Ap Dodu

Condition: excellent (used), The milling cutter motor has a power of 37 kW, and the roller drive motor has a power of 4 kW. Ksdpozxc Aiofx Ap Dsdu

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK 500-litre pressure vessel with a working pressure of 16 bar is a reliable solution designed for storing compressed air in industrial facilities, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, it can serve both as a storage buffer and as an element for stabilizing compressor operating parameters. Key Features of the 500 L Pressure Vessel Professional pressure-rated construction – made of high-quality 5 mm thick steel, resistant to pressure and corrosion. Kjdpfjzwmlfex Ap Dedu UDT certification and CE marking – compliance with European safety and quality standards. 16 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High 500-litre capacity – provides stable compressed air supply and reduces the frequency of compressor start-up cycles. Multiple connection ports – 6 connection ports with diameters of 1 1/4", 2", and 1/2" allow flexible connection to various installations. High-quality workmanship – durable external paint coating provides long-lasting protection. Space-saving vertical design – allows efficient use of available space in the workplace. Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 5 mm wall thickness, ensuring resistance to pressures of up to 16 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE symbol and the UDT notified body number, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Precision and Operating Efficiency – Stable Pressure and Optimized Compressor Performance With a large 500-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This enables the smooth operation of compressed-air-powered equipment and significantly extends compressor service life by reducing the number of start/stop cycles. The vertical design allows for compact installation, which is particularly important in facilities with limited space. Standard Equipment Connection ports: 6 pcs. G1/2" – 2 pcs. G2" – 2 pcs. G1 1/4" – 2 pcs. Nameplate with CE marking UDT notified body number Complete technical documentation and pressure vessel passport External anti-corrosion coating Technical Specifications Tank capacity 500 L Maximum allowable pressure PS 16 bar Test pressure PT 22.88 bar Maximum allowable temperature TSmax 50°C Minimum allowable temperature TSmin -20°C Diameter 600 mm Height 2110 mm Weight 160 kg Connections 6 G1/2" connections 2 pcs. G2" connections 2 pcs. G1 1/4" connections 2 pcs.

Year of construction: 2018, condition: excellent (used), Fully automatic production line for chocolate bars, made of stainless steel Manufacturer: GUSU Food Processing Machinery Year of construction: 2018 Condition: very good, little used The line consists of the following units: Ksdpfx Ajzx Uz Djp Dedu Chocolate bar production line, TPX-400, 400 V 3P 50 Hz, 40 kW 180° turning conveyor belt, TPX-400, 400 V 3P 50 Hz, 1.5 kW Elevator, TPX-400, 400 V 3P 50 Hz, 1.1 kW Straight roller, TPX-400, 400 V 3P 50 Hz, 0.75 kW Longitudinal cutter and distributor, TPX-400, 400 V 3P 50 Hz, 1.27 kW Single group roller, TPX-400, 400 V 3P 50 Hz, 1 kW Transverse cutter, TPX-400, 400 V 3P 50 Hz, 2.5 kW Chocolate storage tank, BWG500, 400 V 3P 50 Hz, 6 kW Chocolate conche, JMJ500, 400 V 3P 50 Hz, 9 kW Chocolate enrobing machine, TY J600, 400 V 3P 50 Hz, 21.38 kW Cooling tunnel evaporator I, TY J600, 400 V 3P 50 Hz, 0.75 kW Cooling tunnel evaporator II, TY J600, 400 V 3P 50 Hz, 0.75 kW Cooling tunnel evaporator III, TY J600, 400 V 3P 50 Hz, 0.75 kW Cooling tunnel evaporator IV, TY J600, 400 V 3P 50 Hz, 0.75 kW Cooling tunnel evaporator V, TY J600, 400 V 3P 50 Hz, 0.75 kW Cooling tunnel evaporator VI, TY J600, 400 V 3P 50 Hz, 0.75 kW Automatic packaging machine, SFC 2, 400 V 3P 50 Hz The production line is 35 meters long. If you have any questions, please do not hesitate to contact us!

Condition: good (used), functionality: fully functional, 1 x multi-spindle automatic lathe Traub TD 26 with boring unit + tool magazine Kedpfsz Agyaex Ap Djdu Iemca AS 325/32 CT Year of manufacture: 1992 + chip conveyor The machine can be inspected while powered on.

Condition: used, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: foot remote control, For sale is a Mubea / Muhr und Bender BFL 350, a robust combined profile and bar steel shear with punching and notching capabilities. This machine is ideally suited for processing profiles and bar steel, as well as for punching and notching operations. Thanks to its combined design, various processing steps can be carried out with a single machine. Technical data: Manufacturer: Mubea / Muhr und Bender Type: BFL 350 Design: combined profile/bar steel shear with punching and notching capabilities Punching force: 35 t Punching: up to Ø 28 mm with a sheet thickness of 10 mm Punching: up to Ø 23 mm with a sheet thickness of 12 mm Cutting capacities: Round steel: up to Ø 30 mm Flat steel: up to 28 mm Angle steel: up to 90 x 90 x 8 mm Flat steel: up to 150 x 13 mm Flat steel: up to 80 x 16 mm The Mubea / Muhr und Bender BFL 350 impresses with its versatile applications and its solid construction, designed for industrial use. Inspection is possible by prior arrangement. Kjdpfx Apjz Ahanj Dodu If you have any questions about the machine or would like further information, please do not hesitate to contact us.

Condition: used, mileage: 297,305 km, power: 220 kW (299.12 HP), first registration: 07/2020, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 40 m³, loading space length: 7,400 mm, loading space width: 2,460 mm, loading space height: 2,190 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, M-Benz Atego 1630 beverage box truck with Bär loading platform VIN: 448080 Chassis / Components: * Wheelbase: 5,360 mm * Leaf/Air suspension * Tires: 305/70 R19.5 * Remaining tread depth: 1st tire ~40-50%, 2nd tire 60% * Diesel tank * AD-Blue tank, plastic * Two-line brake system Kdedjz Al S Uspfx Ap Dou * ABS / 15-pin connector * 2x Fire extinguisher bracket Cab: * Classic Space S * 2 seats * Spoiler * Air conditioning * Radio * Bluetooth, AUX * Hands-free system * Cruise control * Tachograph 4.1 DTCO * Rear view camera Body: * Zikun Fahrzeugbau beverage box * Bär BC1500 S4B4 * Max. 1,500 kg load capacity * Support legs on both sides * 2x Load securing bar per side * 4x Load securing bar on top and bottom * 4x Load securing beam * Swivel wall on both sides * Loading area dimensions L x W x H: 7.40m x 2.46 m x 2.20 m * Volume: approx. 40 m³ Engine / Transmission: 300 hp / 220 kW // 7,698 cm³ // Euro 6d * Engine brake * Automatic transmission Weights: * Gross vehicle weight: 16,000 kg * Tare weight: 8,350 kg * Payload: 7,650 kg Other: * German vehicle * 1 previous owner * New technical inspection (TÜV) available upon request ---- New technical inspections / safety checks or weight reductions/increases are available upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English, and Russian!---- No liability for printing & typographical errors, changes, prior sale, and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl on the Rhine. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide range of vehicles can be found on an area of 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in buying or selling vehicles. See for yourself! Our services for you: Loading of vehicles We will gladly help you with the loading of your purchased vehicles. Organization of special transports We will gladly help you with the organization of special transports. Day license plates / Export license plates We will gladly help you obtain export/short-term license plates. Handling of customs formalities We will gladly help you with the handling of customs matters.

Condition: used, mileage: 261,292 km, power: 155 kW (210.74 HP), first registration: 02/2016, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2027, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,560 mm, loading space volume: 30 m³, loading space length: 5,080 mm, loading space width: 2,480 mm, loading space height: 3,380 mm, Equipment: ABS, air conditioning, tail-lift, M-Benz Atego 821 Walther Body VIN: 028937 Chassis / Components: * Wheelbase: 3,560 mm * Leaf / Air suspension * Tires: 215/75 R.17.5 * Remaining tread depth: Front approx. 60%, Rear approx. 60% * Diesel tank // Plastic * 1 x Ad-Blue tank * LBW-Bär BC 1000 S4 - A4 Cab: * Classic Space S * Storage compartment above the engine tunnel * 2 seats * Air conditioning * Radio CD * USB, Aux * Camera * Lane keeping assist * Roof hatch Body: * Walther flatbed // side curtain * Cargo area: 5.08 m x 2.48 m x 2.38 m, approx. 30 m³ * Aluminum slats * Tie-down points * 6 x cargo securing rails embedded in the floor * 9 x bars for cargo securing * LBW Bär BC 1000 S4 - A4, 1,000 kg load capacity, year 2016 Engine / Transmission: * 210 hp / 155 kW // 5,132 ccm // Euro 6a * Automatic transmission * Engine brake * Differential lock Kedpoz Al Trefx Ap Dsdu Weights: * Gross weight: 7,490 kg * Unladen weight: 5,710 kg * Payload: 1,780 kg Other: * 1 previous owner * German vehicle * Valid TÜV (technical inspection) ---- New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing & typing errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. On 11,000 m², you will find a wide variety of vehicles. Our corporate philosophy is characterized by fairness and reliability. Since we are very concerned about customer satisfaction, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organization of special transports We will gladly help you with the organization of special transports. Day licenses / export license plates We will gladly help you obtain export/temporary license plates. Handling customs formalities We will gladly help you with handling customs matters.

Condition: good (used), Pressure tester, pressure gauge, manometer, test manometer, compression gauge -Manufacturer: Hydrotechnik Limburg, pressure tester Kodpfeyccvfox Ap Djdu -Pressure range: 2x 0 to 10 bar -Dimensions: 260/150/H205 mm -Weight: 3.2 kg

Condition: excellent (used), Contact pressure gauge, pressure switch, pressure gauge, test pressure gauge, differential pressure switch, pressure switch, low pressure switch -Manufacturer: VEB, Contact manometer 0 - 0.1 bar / 0-10 kp/cm² unused original packaging Kjdpfxsyfffzs Ap Dedu -Manometer: Type 1/BM 20/2 160Ø -Switch: 220V 30W 30VA -Number: 6x pressure gauges available -Price: per piece -Cardboard dimensions: 240/240/H125 mm -Weight: 0.9 kg/pc.

Condition: excellent (used), Contact pressure gauge, pressure switch, pressure gauge, test pressure gauge, differential pressure switch, pressure switch, low-pressure switch, pressure measuring device with contact device -Manufacturer: WIKA, pressure gauge with contact device 0 - 250 bar, unused, original packaging -Manometer: Type 212.20.160 Kont 821.1 -Connection: G1/G2 -Quantity: 1x pressure gauge available -Cardboard dimensions: 240/240/H190 mm Kdsdpfx Apsyfl Upo Dju -Weight: 1.5 kg

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester, barometer -Manufacturer: HG, Manometer 0 - 0.016 bar, unused, original packaging -Type: Ø 160 mm 0-160 mmWs Kdedpoyfm H Tsfx Ap Deu -Quantity: 1x pressure gauge available -Cardboard dimensions: 200/180/H50 mm -Weight: 1.6 kg.

Condition: used, Year of construction: 1989, functionality: fully functional, pressure: 13 bar, Used steam generator, fully equipped and housed in a container. Type: DF 1500 (Year of manufacture 1989) Burner: Weißhaupt (capable of operating on oil or gas; currently equipped for oil) New water treatment system installed in 2024 Fully installed within the container Price is net Location: Poland Container built in 2004. Please do not hesitate to contact us if you have any questions. Kdedeyx U Igjpfx Ap Deu

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Hydraulic unit: with hydraulic tank, portable -Hydraulic pump: pressure up to 200 bar, unfortunately without type designation Kdodpfx Asxbdghsp Dsu -Flow rate: 1.2 l/min -Motor: EP 1.1 kW / 1410 rpm -Hydraulic tank: with shut-off valve -Individual components: see photos -Dimensions: 400/220/H430 mm -Weight: 30.5 kg

Condition: good (used), Counting scale, scale, digital scale, market scale, shop scale, price calculating scale -Manufacturer: EXA, Market scale, Retail scale -Type: E 10 -Weighing range: max. 10 kg -Display: Price / kg / Tare, double-sided display Ksdpfx Apsw S T D Es Dsdu -Dimensions: 320/310/H120 mm -Weight: 3 kg

Condition: excellent (used), Year of construction: 1993, CNG Tank Gas Methane Trailer Natural gas 200 Bar Kdjdpfxet D Apts Ap Deu Manufacturer: SAMRO Year: 1993 Tare: 6900 kg We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be happy to provide you with a quotation or give you more information about other pressure vessels.To discuss the possibilities, please contact us by phone or e-mail.

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high-pressure pump, high-pressure hand pump, hydraulic hand pump Kedpeyzmvhefx Ap Dedu -Manufacturer: RARIPRESS, Hydraulic pump, hand pump, high-pressure pump -Type: RP 62C -Pressure range: max. 700 bar -Quantity: 1x hand pump available -Dimensions: 580/185/H180 mm -Weight: 14.7 kg

Condition: good (used), Year of construction: 1978, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, Kdjdpswnn U Esfx Ap Dsu -Hydraulic unit type CB140 H 116 -Pressure: up to 150 bar -Flow rate: 6 l/min -Hydraulic tank: with level indicator -Individual components: see photos -Dimensions: 700/400/H710 mm -Weight: 125 kg

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Simplex, hydraulic pump hand pump two-stage pump -Type: P- unfortunately no exact type designation Kjdowwq Exepfx Ap Dedu -Pressure range: max. 10000 PSI 689 bar -Tank capacity: l -Quantity: 1x hand pump available -Dimensions: 740/200/H150 mm -Weight: 8.7 kg