Used Scm 130 for sale (633)

Condition: used, machine/vehicle number: 008108, Max width workable: 1050 mm Max length workable: 2400 mm Cedpfx Aew Iddujh Ieha Max height workable: 250 mm

Condition: used, Year of construction: 2019, operating hours: 6,742 h, total height: 2,200 mm, total length: 6,950 mm, total width: 1,100 mm, Colour: White Weight: 3.700 kg - Year: 2019 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AH00001378 - Operating hours: 6742 - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers Cedpfx Ajzr Hyxsh Isha - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Fine milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Radius scraping unit - - Tools available: Yes - └ 8th unit type: Flat scraping unit - - Tools available: Yes - └ 9th unit type: Brushing unit - - Tools available: Yes - Min. edge band thickness [mm]: 10 - Max. edge band thickness [mm]: 60 - Min. feed speed [m/min]: 10 - Max. feed speed [m/min]: 25 - Feed speed control: Variable - Glue system: Glue pot - Type of glue: PUR/EVA - Voltage [V]: 400 - Current consumption [A]: 47 - Fuse [A]: 63 - Power [kW]: 10.0 - Transport dimensions: 6950mm x 1100mm x 2200mm (l x w x h) - Transport weight [kg]: 3700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, SCM Routech R 3000 CNC machining centre for machining sheet material, with automatic loading (vacuum destacker) and unloading. Technical data: - Working area: 2,600 x 1,250 mm Cjdpfx Aezryyljh Ijha - X-axis: 2,700 mm - Y-axis: 1,600 mm - Z-axis: 250 mm - Spindle motor: 7.5 kW - Feed rate: Max. 38 m/min - Video: On request

Condition: used, Technical data: - Conveyor belt width: 150 mm - Motor: 3 kW Chjdpszryw Rjfx Ah Ija - Weight: 490 kg

Condition: used, Year of construction: 1994, Motor 6 / 7.5 kW with 4-roller feed, fixed speeds. Speed extensions. Height of worktable: 920 mm. Spindle tilting: -10° + 45°. Max. spindle projection above table: 175 mm. Spindle speeds: 3250/6500-5000/10000 rpm. Max. tool diameter: 250 mm. Weight: approx. 950 kg. Location: Nattheim. Chjdow Enw Iepfx Ah Iea

Condition: used, Year of construction: 2007, Work table dimensions: 3050 x 1240 mm Passage opening: 170 mm Travel range X-Y-Z: 3500 x 1790 x 340 mm Main milling head: Electric spindle with HSK 63 F tool holder Speed range of 600 - 24000 rpm, continuously adjustable via inverter Motor power 8.5 kW from 12,000 rpm (S1) Clockwise/counterclockwise rotation Rotary axis Vector (C-axis): For use with angular gearheads. Angular gearhead Mimatik HSK 63 F Tool changer RAPID 12 (travelling type) Drilling head F11 with grooving unit - 7 independent vertical spindles (4 right and 3 left) - 4 horizontal spindles (1+1 spindles in the X-axis / 1+1 in the Y-axis) Integrated, independent grooving saw unit with saw blade DM 120 mm Work table ALU Vacuum pump 250 cbm/h Power 5.5 kW Max. vacuum (connection) 0.9 bar Control: ESA-GV KVARA 6 with Office PC User interface: Xilog Plus Operating system: Windows XP Cable remote control Central extraction port: 200 mm Weight: approx. 2700 kg Chsdjzr H Ivspfx Ah Ija Space requirement: approx. 5700 x 4100 x 2600 mm without control cabinet Control cabinet 600 x 800 x 1900 mm Storage location: Supplier

Condition: excellent (used), CATALOG NUMBER 7479 Cedpfxozr Itgj Ah Ioha Technical data: - shaft width: 410 mm - 4-knife shaft (TERSA) - noise reduction comb - shaft guard - table length: 2610 mm - longer infeed table: 1435 mm - cast iron tables - both tables adjustable - original cast iron tiltable fence - brake - extraction port diameter: 115 mm - motor: 4 kW - dimensions (LxWxH): 2610x960x1110 mm - weight: 578 kg ADVANTAGES – Made in Italy – 4-knife shaft – brake – noise reduction comb – longer infeed table – unpainted – used surface planer, in very good condition, original DTR documentation Net price: 21,900 PLN Net price: 5,200 EUR (exchange rate 4.2 EUR) (Prices may change depending on significant exchange rate fluctuations)

Condition: used, Year of construction: 2012, GENERAL FEATURES: CNC machining center with a fixed machine table and a moving tool carrier in a portal design for drilling and milling operations on panels made of various materials (chipboard, MDF, solid wood, plastic, etc.). MACHINE STRUCTURE: The base structure is a monolithic design made of thick-walled material, reinforced by welded-in parts across the entire machine bed, making it extremely stable. The table design, with a large base, ensures long-lasting precision and stability. The machine layout allows the user an optimal workflow despite a minimum of space. The mobile portal carrier is made from a solid monoblock. It is positioned in the X-direction on prismatic, ground guides using ball screw slides. On this mobile tool carrier, the working unit is in turn attached to prismatic, ground guides and the ball screw slide. Axis movement is achieved using "brushless" motors in the X/Y/Z axes. The drive system operates in the X-axis via a pre-tensioned precision rack and pinion drive, and in the Y/Z axes via ground ball screws of the highest precision class. AXIS MOVEMENT: The movement of all axes takes place on prism linear guides with a large cross-section and ball screw shoes with a large contact surface, which ensure optimal sliding even at the highest speeds and accelerations. The precise and rapid positioning of the moving portal (X-axis) is achieved by a pinion and rack with helical teeth. Ball screws with a large cross-section ensure the accurate positioning of the working unit along the moving portal (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. STANDARD MACHINE DESIGN: Milling spindle with 5-axis positioning, 11kW (15HP), HSK63, 1200-20000 RPM. The machining unit consists of a powerful 11 kW (15 HP) motor, which is liquid-cooled and capable of 5-axis positioning. This feature enables machining operations to be performed with a tool that can be oriented in any direction; therefore, fewer angular movements are required. The base structure of the milling unit is based on a design with two non-orthogonal axes that intersect next to the tool. This feature guarantees a robust carrier for heavy-duty milling applications. Thanks to the non-orthogonal axes, it is possible to perform numerous repositionings without using too much space. This allows the machining of complex geometries without the risk of collision with the workpiece and achieves an angle of -10° in relation to the machine table. All machining operations are facilitated by the small dimensions of the group in relation to the rotation axis of the spindle: when the group is in a horizontal position, the dimension is only 35mm. WORK TABLE TV: The work table is designed to guarantee the operator maximum "freedom of movement." The vacuum quick-change clamping system provides maximum flexibility with precise positioning and optimal work piece holding. The table consists of moving consoles that are adjusted in the X-axis on ground guides with ball screw shoes and a special profile to ensure Csdpfx Aezrvvvjh Ioha

Condition: excellent (used), CATALOGUE NUMBER 8063 Technical specifications: Codpfx Aozrwdneh Ioha - roller width 640mm - number of knives 4 pcs - max. thickness of workpiece 300mm – from top: - pawls - toothed infeed roller, pulling, twisted - pressure roller - planing roller - pressure roller - smooth outfeed roller, pulling, rubber - digital thickness display - motor 7.5kW - electric brake - electric table lifting - 4 types of rotation speeds 5000/8000/12000/19000m/min - diameter of dust extraction port 160mm - dimensions L/W/H 1400x1100x1250mm - weight 955kg Advantages: - Made in Italy - Electric thickness display - Electric table lifting - Unpainted - Used thickness planer, very good condition, original DTR documentation Net price: 32900 PLN Net price: 7835 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8064 TECHNICAL DATA - Max. diameter of the main saw blade with a scoring blade: 350mm - Max. cutting height: 130mm - Main blade adjustable up/down + angle, manually - Spindle diameter: 30mm - With a crosscut table - Cutting length on the table: 3200mm - Cutting width adjustable electrically with a fence: 1320mm Cjdpfszrwbtex Ah Ieha - With a side table - With a scoring blade - Max. diameter of the scoring blade: 120mm - Spindle diameter: 20mm - Main motor: 7.5kW - 3 types of spindle speeds: 3000/4000/5000 rpm - Diameter of the dust extraction outlet: 120mm - Dimensions of the table with extension and widening: 1870x1440mm - Blade guard - Dimensions (L/W/H): 4100x3400x1500mm - Weight: 860kg ADVANTAGES - Italian made - Cutting width adjustable electrically - With a scoring blade - Unpainted - DTR and CE documentation - Used saw, very good condition Net price: 26900 PLN Net price: 6405 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7967 TECHNICAL DATA - max. width of workpiece: 1100 mm - max. height of workpiece: 170 mm 2 units: 1) metal grooved roller for calibration 2) grooved rubber roller + shoe + metal roller – from above: - slip rubber roller - unit (two units on one motor) 15 kW - slip rubber roller Chsdpfx Ahozrutte Isa - take-off rubber roller - tape blowing – from below: - 2 slip metal rollers - conveyor belt - 2 slip rubber rollers - pneumatic tape oscillation - grinding thickness potentiometer - electric table lifting + manual (for precise adjustment) - pneumatic brake - 2 feed speed types - working pressure 6-8 bar - dust extraction nozzle diameter 2x140 mm - overall dimensions L/W/H 1830x1670x1950 mm - weight 1160 kg ADVANTAGES - Made in Italy - 2 grinding units - Unpainted - Used sander, in perfect condition Net price: 72900 PLN Net price: 17357 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to higher fluctuations)

Condition: not inspected (used), Year of construction: 2001, SCM SUPERSET XL Moulder 5 spindles (Comp.5) Description Number of spindles 5 Chedpfx Ajzqc Snsh Isa Spindle sequence bottom-right-left-top-bottom Infeed table length 2500mm Working width 25-260mm Working height 6-180mm Feed speed 6-36 mtr / min Spindle speed 6,000 rpm 400Volt 50Hz CE (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Catalog number 8036 TECHNICAL DATA max. width of workpiece 1100mm max. height of workpiece 170mm 2 units: – from above: rubber roller, pressure roller, knurled 1) metal roller, knurled, for calibrating rubber roller, pressure roller 2) rubber roller, knurled + sequential shoe + metal roller rubber roller, pressure roller total power of units 15kW -from below: 2 rubber rollers, slip rollers conveyor belt 2 rubber rollers, slip rollers grinding thickness potentiometer belt blowing system pneumatic belt oscillation controlled by photoelectric sensors electric table lifting + manual (for precise adjustment) 2 feed speed types 0.3kW with pneumatic brake Codpfezrnwlsx Ah Ijha working pressure 6-8bar diameter of dust extraction nozzle 2x140mm overall dimensions L/W/H 1840x1650x2000mm weight 1160kg – unpainted – made in Italy – automatic shoe – 2 units – grinding thickness potentiometer – DTR documentation – used grinder, very good condition Net price: 48900 PLN Net price: 11640 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to significant fluctuations)

Condition: excellent (used), Catalog number 7775 TECHNICAL DATA - roller width 640mm - number of knives 4 pcs - max. thickness of the workpiece 300mm – from top to bottom: - feed rollers - toothed, pulling, and twisting infeed roller - pressure roller - planing roller - pressure roller - 2 smooth, pulling, rubber feed rollers - digital thickness display Chedszrlbnjpfx Ah Ioa - motor 5.5kW - electric table lifting 0.7kW - stepless feed rate adjustment 6-20m/min - feed motor 1.1kW - diameter of dust extraction nozzle 150mm - dimensions L/W/H 1000x1400x1200mm - weight 950kg ADVANTAGES - Italian made - electric thickness display - electric table lifting - used thickness planer, very good condition, original DTR documentation, CE Net price: 28500 PLN Net price: 6790 EUR depending on the exchange rate of 4.2 EUR (Prices may change due to significant fluctuations)

Condition: used, Year of construction: 2004, 3200mm carriage Chedpfx Aszqg Rush Iea Electric tilting blade electric cutter Digital display Blade diameter 350mm 380V

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Chodpfjxy Tmnex Ah Isa

Condition: used, Year of construction: 2011, AXES Working area X-Y-Z axes * mm 3050-1300-180 Workpiece length in swivel machining mm 1390 Stroke X-Y-Z axes mm 3460-1735-250 Max. travel speed of the X-Y axes m/min 60 WORKING TABLE Number of workpiece supports and vacuum cups 6 / 2 Standard type Standard End stops / Position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles Std/Number/Speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles Std/Number/Speed 1/min 6 (4X-2Y) / 4000 Integrated slotting/sawing unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power Std. / Opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer mounted on the unit carrier in X 4 positions, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction nozzle diameter mm 150+150 (200) Machine weight Kg 3000 * X Distance between the stops - Y Milling center as reference point; Z Workpiece passage GENERAL FEATURES CNC-controlled boring and milling center, in C-frame design and working table with adjustable workpiece supports and vacuum cups, for performing: - Vertical drilling on the surface of the panel - Horizontal drilling on all four sides of the workpiece - Slot milling with disc cutter in "X" direction - General milling operations Self-supporting structure and working table Structure made of a steel welded construction with the control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV supports. Movable unit carrier Box construction made of cold-rolled steel with internal reinforcing ribs, protective devices with bumpers. Working unit Consisting of a drilling head with vertical spindles, horizontal spindles, an integrated slotting and sawing unit and an SCM electrospindle with tool quick-change system type HSK 63 F. Travel paths of the portal and the unit carrier Movement in the X, Y and Z axis takes place on linear prismatic ball-bearing guides with the aid of pre-tensioned linear guides. The power transmission of the X-axis (movable stand) takes place via a pre-tensioned, backlash-free rack and pinion drive with diagonal movement. The movement of the unit carrier in Y and Z direction takes place via pre-tensioned linear guides. The positioning of the working units and the control of the machine functions takes place via "Brushless" three-phase servomotors and digital drives. CNC CONTROL The control unit consists of a numerical control for the milling and drilling machines and a pre-connected personal computer with a graphical user interface "XILOG PLUS". PC -Office- operating system Windows XP - LCD color screen 17 - Qwerty keyboard - Swiveling control panel - Machine interface software Xilog Plus Xilog Plus features Programming - parametric, graphical and ISO programming Chedpfxoyymz Uo Ah Ija - Import of DXF and ASCII files - Linear or circular interpolation in three axes, linear in space, spiral in the chosen plane - Supported programming with graphic and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool changes - cycles - Possibility of plate zero-point shift for performing drilling on inclined or curved plate sides - Complete compatibility with CAD/CAM Routocam (SCM) - AlphaCam Integrated additional functions - Calculator for direct transfer of the calculated data.

Condition: used, Year of construction: 2011, Usable working width: 520 mm Thickness table dimensions: 520 x 900 mm Max. working height: 300 mm Min. working height: 3.5 mm Min. workpiece length: 220 mm Max. material removal: 8 mm Cutterhead diameter (number of cutters): 120 mm (4 pieces) Cutterhead speed: 4500 rpm Feed rate: 5-8-12-18 m/min Motor power: 7 kW Dust extraction port diameter: 150 mm Codpfx Aszimbdsh Ioha Dust extraction volume: 1300 m³/h Weight: approx. 680 kg Dimensions: 1150 x 1100 x 1250 mm Storage location: Garbsen

Condition: excellent (used), Catalogue number 7739 TECHNICAL DATA SURFACE PLANER: - shaft width: 410 mm - 3-knife cutterblock - sound-dampening comb - shaft guard - adjustable angle guide fence - table length: 2060 mm - both tables adjustable THICKNESSER: - max material thickness on thicknesser: 240 mm - thicknesser shaft guard *from above: - anti-kickback fingers - serrated, sprung feed roller - pressure bars Chjdpfx Ahszhu A Ts Isa - planing cutterhead - pressure bar - smooth outfeed roller - 2 adjustable rollers in lower table - main motor: 5.5 kW - electric brake - electric table height adjustment (up/down) - dust extraction port diameter: 120 mm - dimensions (L/W/H): 2060x970x1150 mm - weight: 660 kg ADVANTAGES – Italian-made – sound-dampening comb – not repainted – in perfect condition – used planer-thicknesser Net price: 22,900 PLN Net price: 5,450 EUR (calculated at 4.2 PLN/EUR) (Prices may fluctuate with larger exchange rate changes)

Condition: excellent (used), CATALOG NUMBER: 7947 Technical specifications: - Track width: 300 mm - Shaft working width: 300 mm - Max. saw blade diameter: 350 mm - Saw blade bore diameter: 70 mm - Max. cutting height: 120 mm - Table width with extension: 750 mm - Table length: 1540 mm Chjdszh Ixbopfx Ah Iea – From above: - Kickback barriers (anti-return block for material) - Metal roller guide - Kickback barriers - Metal roller guide - Shaft with saw blades - 2 smooth metal idler rollers – From below: - Guide rail - Kickback barriers - Track (caterpillar) - Central track lubrication - Stepless feed speed adjustment - Feed motor: 1.5 kW - Main motor: 37 kW - Extraction port diameter: 200 mm - Overall dimensions (L/W/H): 1800x1550x1500 mm - Weight: approx. 1700 kg Advantages: – Italian manufacture – Very good condition – DTR technical documentation – Used multirip saw Net price: PLN 33,900 Net price: EUR 8,070 (based on EUR/PLN 4.2) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number: 7863 TECHNICAL DATA - Track width: 300mm Cedpfxjzbavgo Ah Isha - Working shaft width: 300mm - Max. disc diameter: 350mm - Disc bore diameter: 70mm - Max. cutting height: 120mm - Table width with extension: 750mm - Table length: 1530mm - Top: - Kickback barriers (protection against material reversing) - Metal sliding roller - Kickback barriers - Metal sliding roller - Shaft with saw blades - 2 smooth metal sliding rollers - Bottom: - Guide bar - Kickback barriers - Track - Laser - Centralised track lubrication - Infinitely variable feed speed via inverter - Feed motor: 1.5kW - Main motor: 26kW - Brake - Extraction port diameter: 200mm - Overall dimensions (L/W/H): 1700x1400x1600mm - Weight approx.: 1700kg ADVANTAGES - Italian manufacture - Equipped with laser - Very good condition - Used multi-blade saw Net price: 39,900 PLN Net price: 9,500 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary subject to higher exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8031 TECHNICAL DATA - track width 300mm - working width of the roller 300mm - max. disc diameter 350mm - disc bore diameter 70mm - max. cutting height 120mm - table width with extension 1030mm - table length 1740mm * from above: - kickback pawls (barrier to prevent material from retracting) 2 rows - sliding roller, metal, pressure roller - kickback pawls/ratchets - sliding roller, metal, pressure roller - roller with saws - 2 smooth, metal sliding rollers * from below: - guide strip - kickback pawls/ratchets - track - central, electric track lubrication - stepless feed speed adjustment Codpfx Ahszha Izs Isha - feed motor 1.1kW - main motor 25kW - dust extraction nozzle diameter 1x200mm, 1x120mm - overall dimensions L/W/H 2550x1800x1450mm - weight 1770kg ADVANTAGES - Made in Italy - Unpainted - Very good condition - Used multi-blade saw Net price: 57900 PLN Net price: 13786 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to larger fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 8029 TECHNICAL DATA - track width: 300mm - working width of the roller: 300mm - max. blade diameter: 350mm - blade bore diameter: 70mm - max. cutting height: 120mm - table width with extension: 760mm - table length: 1540mm * from above: - deflectors (barrier to prevent material from recoiling) - metal feed roller, with pressure - deflectors/pawls - metal feed roller, with pressure - saw arbor - 2 smooth, metal feed rollers * from below: - guide strip - deflectors/pawls - track - central track lubrication - stepless feed speed adjustment - feed motor: 1.1kW - main motor: 18.5kW - diameter of dust extraction nozzle: 180mm - overall dimensions (L/W/H): 2250x1450x1600mm Cjdozhbafepfx Ah Ioha - weight: 1570kg ADVANTAGES - Made in Italy - Very good condition - Used multi-blade saw Net price: 36900 PLN Net price: 8786 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 1993, Manufacturer: SCM Model: T150 Class Year of manufacture: 1993 Csdsyx Nadepfx Ah Ijha Motor upgraded: 5.5 kW Tilting range: -10° to +45° Electromagnetic brake Motor with 2 speeds / pole-changeable Speed settings: 3000/4500/6000/7000/10,000 rpm Forward/reverse rotation Table size: 2700 x 700 mm Spindle diameter: 30 mm Table extension: 2 x 650 mm Extendable frame support Aluminum fence jaws Milling fence with fine adjustment - Electric height adjustment - Electric tilt adjustment Feeder: Wegoma VS 44 - 4 rollers Extraction connection: 120 x 120 mm Space requirement: approx. 2700 x 1300 x 1600 mm Weight: approx. 1000 kg Location: 54634 Bitburg, loaded free on truck, unpacked Delivery as-is, as inspected and function tested without refurbishment, without warranty or guarantee

Condition: reconditioned (used), Number of spindles 6 St. Working width 240 mm Working height 200 mm Length of the planing table 2500 mm Feed speed 6-36 m/min. Dimensions (L/W/H) 4900x1700x2000 mm weight of the machine ca. 3500 kg Control SCM Mobile 10 SCM Superset NT PLUS Comp. 31 for window production ----- The machine will be partial reconditionned at our facility prior to delivery. Highlights: - Machine with 6 spindles (2 with HSK mounting) - Spindle speed 8,300 rpm - Working width 240 mm, working height 200 mm - Electronic horizontal and vertical spindle positioning - PRL equipment for glazing bead separation - Air-cushion table - Touchscreen control Technical Data: Working width: max. 240 mm (kit for min. width 15 to 25 mm) Working height: max. 200 mm Feed speed: infinitely variable 6 to 36 m/min via inverter Infeed table: length 2,500 mm Machine weight: approx. 3,550 kg Dimensions: length 4,900 mm / width 1,700 mm / height 1,700 mm 1st Spindle: _____ First bottom spindle, horizontal (jointer/planer) Motor with brake, 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd Tool Mount (HSK): _____ First right tool mount, vertical Motor with brake, 7.5 kW Speed: 8,300 rpm HSK 85S quick-change system Electronic vertical and horizontal positioning 3rd Tool Mount (HSK): _____ First left tool mount, vertical Motor with brake, 7.5 kW Speed: 8,300 rpm HSK 85S quick-change system with pneumatic unit Electronic vertical and horizontal positioning Electronic tool diameter adjustment (setup) Cjdpfxezq Hiqs Ah Ijha 4th Spindle: _____ First top spindle, horizontal Motor with Brake 11 kW Speed ??8,300 rpm Electronic horizontal positioning Electronic tool diameter adjustment (setup) 5th Spindle: _____ Second horizontal top spindle Motor with brake 7.5 kW Speed ??8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter adjustment (setup) 6th Spindle: _____ Second horizontal bottom spindle Motor with brake 7.5 kW Speed ??8,300 rpm Electronic vertical and horizontal positioning Additional technical features: _____ - 2 feed units following the top spindles to reduce the axis spacing from 620 mm to 450 mm (for short workpieces) - Driven, motorized feed roller integrated into the machine table - Pneumatic hold-down pressure before the jointing spindle (can be deactivated from the control panel) - Pneumatic feed deactivation for the final unit following the 2nd bottom spindle; operable even when the sound enclosure is closed - Pneumatic "TTL" pressure elements before the first horizontal top spindle - Air-cushion lubrication in the machine table to minimize friction - Manual lubrication pump for the machine table - Central lubrication system for guideways and controlled axes - 5 x electronic horizontal positioning (positions 2 – 3 – 4 – 5 – 6) - 4 x electronic vertical positioning (positions 2 – 3 – 5 – 6) - 3 x electronic tool diameter adjustment (setup) Positions (3 – 4 – 5) - Mobile 10 control system - PRL equipment (Glazing bead package) for cutting out the glazing bead - Soundproofing and safety enclosure with electromagnetic interlock (CE standard) Dust extra...