Used Scm Dogma for sale (596)

Condition: good (used), Code: 0399 Brand: TECNOMAX SCM Model: ST 4 ELITE - CE Standard Saw spindle moulder with tilting blade and scoring unit and tilting spindle moulder for carpentry, furniture, wooden window frames, doors, panels and various - CE Standard Technical data: Squaring carriage length 3200 mm Blade inclination 90-45 degrees Max saw blade diameter with scoring unit mounted 315 mm Max saw blade projection from the table at 90°/45° mm 100/70 Cutting width at parallel guide 1000 mm Scoring unit blade diameter 100 mm Hfodpszbmvajfx Ahash Workpiece clamping press Tilting Spindle moulder 90-45° Useful spindle length 125 mm Spindle rotation speed rpm 3500/6000/8000/10000 Max tool diameter 210 mm Tenoning table and head Electrical connection and removable support for the feeding Three-phase motors 5,5 Hp Suction inlet diameter mm 120 Overall dimensions of assembled machine mm 3600 x 3000 x 1100 h Overall dimensions for transport mm 3600 X 1600 X 1100 h Weight kg 645

Condition: good (used), Year of construction: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH PRE-MILLING (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Panel height to be machined: 8 - 58 mm Thickness 10 to 45 mm when using rounding unit - Panel length for edgebanding: 210 to 2500 mm - Minimum panel width to be machined: 90 to 1100 mm - Edge thickness in coil: 0.4 to 3 mm without rounding Hfodpfsrx S Ipox Ahash max 3 mm with rounding unit - Edge thickness in strips: max 6 mm without rounding max 3 mm with rounding unit - Edge width: panel thickness + 2 mm each side - Feed rate: 11 m/min - Minimum gap between panels: 600 mm - Panel overhang beyond the transfer chain: 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Reel holder table Ø800 mm - Front extension table - Easy size: digital positioning of infeed fence and panel passage height - Anti-adhesive spray unit - Pre-milling unit (RT-V trimmer) 12,000 RPM - Infrared panel preheating at infeed - Glue application unit (VC-VM) with interchangeable glue pot for granules, capacity: 1 kg. Heating time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers (1 roller powered and with timer) - Trimming unit (end cutting) tiltable 0-20° 12,000 RPM - Top/bottom flush trimming unit with digital positioning and copying system. 2 mm radius (or chamfer) router 12,000 RPM - Corner rounding unit R2 mm, 12,000 RPM, digital positioning - Top/bottom R1 & R2 mm radius scrapers with digital positioning - Top/bottom straight scrapers - Edge finishing spray device (Nebulizer) OTHER FEATURES: - Pre-milling group motors: 2x2 kW - End trimming motors: 2x 0.19 kW - Lift/lower motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming group motors (milling): 2x 0.65 kW - CE Marked - Lockable isolator, emergency stop buttons - Power supply: 380 V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m³/h Edge trimming: 360 m³/h Scrapers: 2x360 m³/h Max. footprint in working order: 10.80 x 2.40 m Dimensions for transport (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and diagrams.

Condition: used, Year of construction: 2014, machine/vehicle number: AH /117836, functionality: fully functional, year of last overhaul: 2025, Equipment: documentation/manual, Ideal machine for edge banding of solid wood panels MACHINING CAPABILITIES: - Panel height (thickness) to be machined: 8 to 60 mm - Router pass: max. 90mm², 0 to 3 mm - Minimum panel length to be machined: 140 mm with an edge thickness >3 mm 200 mm with an edge thickness between 3 and 12 mm - Panel width to be machined: up to 2000 mm - Edge thickness: 0.4 to 3 mm in coil form, up to 12 mm in strip form Panel overhang relative to the chain (part protrusion): min. 30 mm - Edge width: recommended overhang: panel thickness + 4 mm - Feed system (2 feed speeds) 18 m/min for thin edges 12 m/min for strip edges (solid wood) - Distance between parts (depending on feed speed): recommended min. 800 mm MACHINE COMPOSITION: - Unwinding table, useful diameter: Ø780 mm - Electric positioning infeed guide - Chain conveyor belt, work surface height from the ground: 96 cm - Front extension table with rollers (serves as a support up to 2 m) - RT-E sanding unit (edge trimmers or routers) 2 x 4 kW, 9000 rpm - VC gluing unit Infrared preheating of the edge Pre-feeder for EVA granules, indicative consumption 8.5 kg/h "Fastblock" glue pot, pneumatic pre-cutting shear Pressing with 4 rollers, including 1 motorized roller, pressure with electric adjustment - K-SEL end trimming unit Rotation speed: 12000 rpm, motor inclination from 0 to 15° - RFK top/bottom flush trimming unit Rotation speed: 12000 rpm - RI 800 chamfering/flush trimming unit with copy pad Rotation speed: 12000 rpm, spindle inclination from 0 to 25° - GLC compact sanding unit, 1400 rpm Belt: 75 x 2700 mm, inclination from 0 to 5°, adjustable pneumatic pressure - SPN polishing station with textile polishing brush - Motorized operator return, useful width 1 m, with 2 roller tracks, spacing 34 cm Air cushion track and belt conveyor. Arrival height from the ground: 79 cm OTHER CHARACTERISTICS: - General power supply: 400 V, three-phase + N + T, 50 Hz - Installed power: IN 52 A nominal - Pneumatic supply: 8 - 10 bars, dry air, working pressure: 6 bars - Extraction: 6 x Ø50 mm, 1 x Ø80 mm, minimum flow rate 3000 m3/h Hedpozcpixjfx Ahaofh - CE marking, lockable disconnect switch, emergency stop buttons

Condition: used, Year of construction: 2011, AXES Working Range X-Y-Z Axes * mm 3050-1300-180 Workpiece length for pendulum operation mm 1390 Stroke X-Y-Z Axes mm 3460-1735-250 Max. traverse speed of X-Y axes m/min 60 WORK TABLE Number of workpiece supports and vacuum cups 6 / 2 standard type Standard end stops / position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles std/quantity/speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles std/quantity/speed 1/min 6 (4X-2Y) / 4000 Integrated grooving / saw unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power std./opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer traveling with unit carrier in X 4 places, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction connection diameter mm 150+150 (200) Machine weight Kg 3000 * X: distance between stops; Y: milling center as reference point; Z: workpiece passage GENERAL FEATURES CNC-controlled drilling and milling center, C-frame design, and worktable with adjustable workpiece supports and vacuum suction cups, for: Hfjdpfx Ahoyymz Ueaoh - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Groove milling with disc cutter in the “X” direction - General milling work Self-supporting structure and work table Structure made from welded steel construction with control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV carrier options. Box construction made from cold-rolled steel with internal stiffening ribs and protective devices comprising a drilling head with vertical spindles, horizontal spindles, an integrated grooving and saw unit, and an SCM electrospindle with HSK 63 F quick-change tool system. Movement paths of the portal and unit carrier Movement in the X, Y, and Z axes is via linear prismatic guideways with preloaded ball bearings. The X-axis movement (moving gantry) uses a preloaded, backlash-free rack-and-pinion drive with helical gearing. Movement of the unit carrier in Y and Z directions is also preloaded for precision. Positioning of the working units and machine function control is through "brushless" AC servo motors and digital drives. CNC CONTROL The control unit comprises a numerical control for the milling and drilling machines and a PC with a graphical user interface "XILOG PLUS". PC office operating system Windows XP - 17" LCD color screen - QWERTY keyboard - Swiveling control panel - Machine interface: Xilog Plus software Xilog Plus Features Programming - Parametric, graphical, and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation on three axes, spatially linear, spirally on selected plane - Supported programming with graphical and syntax assistance for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Possibility to shift panel zero point for drilling on slanted or curved panel sides - Full compatibility with CAD/CAM Routocam (SCM) – AlphaCam Integrated additional functions - Calculator for direct transfer of computed data - S

Condition: used, machine/vehicle number: 008381, X axis working area: 4250 mm Y axis working area: 2280 mm Hfodpjx Swc Hefx Ahash Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 11 Total number of tool changer positions: 24

Condition: excellent (used), CATALOG NO. 7967 TECHNICAL DATA - Maximum working width: 1100 mm - Maximum working height: 170 mm Hfjdpfsza Elwox Ahaoh 2 units: 1) Grooved metal roller for calibration 2) Grooved rubber roller + shoe + metal roller – Top side: - Rubber pressure roller - Unit (two units on one motor) 15 kW - Rubber pressure roller - Outfeed rubber roller - Belt cleaning by air blast – Bottom side: - 2 metal pressure rollers - Feed belt - 2 rubber pressure rollers - Pneumatic belt oscillation - Grinding thickness potentiometer - Electric and manual table lifting (for precise adjustment) - Pneumatic brake - 2 feed speed options - Working pressure: 6–8 bar - Extraction nozzle diameter: 2x140 mm - Overall dimensions (L/W/H): 1830x1670x1950 mm - Weight: 1160 kg ADVANTAGES – Italian manufacture – 2 sanding units – Not repainted – Used sander, perfect condition Net price: 77,900 PLN Net price: 18,550 EUR (based on 4.2 EUR exchange rate) (Prices may vary with larger exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Equipment: CE marking, Model Accord 30 FX Year November 2012 - First time installed in 2013 Machine type 3-axis CNC machining center for solid wood, doors, windows, stairs, and joinery Working feld: X 3680 by Y 1680 mm. Z-axis travel 250 mm BRC multifunction unit for cutting, routing and boring both vertically DUO HT 12 Machining Head Syncron 8 Frontal and rear row of stops H50 for plates Prearrangement for clamps and for pneumatic clamps for plate Automatic positions system for placemant of the support beams and vacuum cups. 16 adjustable suction cup H50 145x145 mm. 8 adjustable suction cup H50 145x55 8 adjustable suction cup H50 180x65 Nr 8 Lifting supporters Motoriserd belt for wastes removal. Main electro spindle power 12 kW Hfodpfx Aszbz Htohaoh Maximum spindle speed 20,000 rpm Tool holder HSK-F63 Tool changer for 12 tools Vertical drilling spindles 10 X-Y rapid speed Up to 90 m/min Vacuum pump capacity 250 m³/h Maximum workpiece height 250 mm Supplementary base for bar Matic TecPad mobile console Pro-Speed Safety system XiLog Maestro soft wear Approximate machine weight 5 000 kg Volt 400 AC 50 Hz This machine still is in daily use to the end of week no. 24 Machine first time installed in 2013 and it is working on its orginal place. Come from Norway also low number of workin hours during the years. Rekman Maskin & Service - service of cnc woodworking machines since 1986

Condition: good (used), Equipment: CE marking, SCM CU 410 K Combination Universal Machine – 5-in-1 combination / panel saw / router / jointer / planer / mortising machine incl. feed system and various spare belts. For sale is a high-quality and extremely robust SCM CU 410 K universal combination machine manufactured in Italy. The machine combines the most important wood processing functions into a compact, professional unit and is ideal for carpentry shops, joineries, craft businesses, or demanding woodworkers. The CU 410 K offers the stability and precision of professional individual machines with a significantly smaller footprint. Features & technical data: Jointer/Planer: +Working width of jointer/planer: 410 mm +Total length of jointer tables: 2000 mm +Swiveling jointer fence: 90–45° +Tersa cutterblock with quick-change reversible knife system +Cutterblock speed: 5000 rpm +Max. feed height of planer: 240 mm +Feed rate of planer: 6 m/min Panel Saw: +Saw blade diameter: 300 mm +Scoring unit +Max. cutting height: 100 mm Sliding table: +Cutting length of sliding table: 700 mm +Parallel fence Routing unit: +Router spindle: 30 mm +Speeds: +3000 / 4500 / 6000 / 8000 / 10000 rpm +Max. tool diameter recessed under table: 160 mm +Stable router fence Hsdjzdiyropfx Ahasfh +Mortising device +Solid construction made of gray cast iron +Precise guide for demanding work Mortising table: +400 × 185 mm +Travel distances: 130 / 140 / 150 mm Additional features: +Tenoning table +Dado frame with swivel runner +Large workpiece supports +Tersa cutterblock +Scorer +Solid gray cast iron construction +SCM professional quality – Made in Italy Dimensions & weight Shipping dimensions approx.: 2040 × 1500 × 1140 mm Weight: approx. 950 kg Due to its robust construction, the machine is particularly durable, runs smoothly, and is precise. An ideal machine for anyone looking for a high-quality combination machine with professional features. Inspection and test run possible by arrangement.

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Hedpexy Tmnofx Ahaofh

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, power: 5.5 kW (7.48 HP), planing width: 500 mm, Thickness planer Manufacturer: SCM Model: S 50 Motor: 5.5 kW 4-knife cutterhead Feed speed: 7.5–25 m/min Planing width: 500 mm Hfodpfsyu N Ulsx Ahaoh Planing height: 240 mm 2 rollers in the table

Condition: excellent (used), Year of construction: 1999, machine/vehicle number: AB/118718, functionality: fully functional, SMC SCIE spindle shaper SI12TW Hsdpfxozc Dxzj Ahasfh Table length: 1,500 mm Spindle adjustment: up/down Blade adjustment: up/down Blade angle adjustment: up to 45° Cutting width on the right side: 1,450 mm Maximum blade diameter: 300 mm Milling spindle diameter: 35 mm Spindle speed: 3,000/4,500/6,000/8,000/10,000 rpm Saw speed: 4,000 rpm Motor power: 4 kW Available in the Ardennes region.

Condition: used, Wide Belt Sander SCM UNO RCS - used - Combination unit with contact roller and sanding pad, contact roller made of steel, rubber-coated contact roller, sanding belt oscillation, infeed and outfeed table extension. ----- Technical Specifications ----- Working width: 920 mm Number of belts: 2 units Sanding belt size: 930 x 1,525 mm Feed speed: 4.5 / 9 m/min Max. workpiece thickness: 160 mm Min. workpiece thickness: 3 mm Extraction port Ø: 2x160 mm Motor power: 11 kW Dimensions (LxWxH): 1,700 x 1,480 x 1,600 mm Weight: 1,175 kg Hjdpfx Ahoy Dhudsasfh

Condition: used, Thickness planer SCM S 63 - used - Segmented pressure beam, Under-table roller, Hodpfx Ahjxm R Uvsasfh Separate feed motor ----- Technical specifications ----- Planing width: 630 mm, Number of knives: 4 pcs., Passage height: 235 mm, Feed speed: 6 /9/12/18 m/min., Extraction nozzle Ø: 180 mm, Weight: 1035 kg

Condition: used, Spindle moulder SCM T130 NPS - used - fine-adjustable fence, tenoning and slotting table, right-/left-hand rotation ----- Technical Data ----- Table size: 1,080 x 750 mm, Hedpfx Ajw Nv Nfshajfh Spindle diameter: 30 mm, Speeds: 3,000/4,500/6,000/7,000/10,000 rpm, Extraction port Ø: 120 mm, Lower extraction port Ø: 120 mm

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: AB/132228, functionality: fully functional, SCM S520 PLANER Working width: 520 mm Planing height: 250 mm Planing cylinder: helical blades Number of blades: 4 Height adjustment: electric Thickness display: scale Feed speed: 2 speeds Hfsdjzcyzfspfx Ahaoh Infeed roller: steel Outfeed roller: steel Table rollers: no Motor power: 5.5 kW Dust extraction port: 140 mm Machine length: 1200 mm Machine width: 1400 mm Weight: approx. 900 kg Available in ARDENNES

Condition: good (used), For sale is a used SCM panel saw with a cutting length of 3000 mm. The machine has been inspected and refurbished by our service team and is in good condition. Technical data: - Cutting length 3000 mm - Cutting width 600 mm - Cutting height 135 mm - Max. saw blade diameter 400 mm - Dust extraction connection 120 mm - Motor power 5.5 kW / 7.5 hp The panel saw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Saw, circular saw, panel saw Reference: R-A0074 Hodpfoza Dqfjx Ahasfh

Condition: used, Year of construction: 2005, Working area: X=2970 mm / Y=1725 mm Axis travel speeds: X=60 Y=45 Z=25 m/min Weight: 3200 kg Storage location: Nattheim Hfjdpfx Ahsw Dccceaoh

Condition: used, Year of construction: 2007, Travel range: X=4400 Y=2195 Z=440 mm Working area in X=3650 mm Y=1560 mm Clearance: 330 mm Electrospindle SCM Power 2000, high speed milling spindle with 13 kW power Rotary axis Vector (C-axis) Cleaning blower for tool on the milling unit Tool holder HSK 63 F Speed range 600 - 24,000 rpm, stepless via inverter Motor power 8.5 kW Tool holders: 6 pcs Tool changer: Rapid 12 (12 positions) Vacuum pump 250 m³/h / 5.5 kW Max. vacuum: 0.9 bar Reference stop at the sides of the table Drilling unit with 11 spindles (7 vertical / 4 horizontal) Control: NUM Series 1000 User interface: XILOG Plus PC Office hardware WINDOWS XP Professional Total connected load: max. 27.5 kW Weight: 5200 kg Storage location: Nattheim Hjdpow Dcb Sefx Ahajfh

Condition: used, Year of construction: 2022, PANEL SAW WITH TILTING SAW BLADE Linvincibile SI 5 KEY FEATURES SLIDING TABLE: GUARANTEED SUPERIOR CUTTING QUALITY OVER THE LONG TERM TELESCOPIC ARM: AN “UNBEATABLE” SMOOTH MOVEMENT SAW UNIT: FOR A PERFECT CUT Technical Data SI 5 Main saw blade diameter (mm): 550 Cutting capacity with extendable fence - with table 3200 mm - with table 3800 mm 3200x3200 3800x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extractor port diameter: - on frame - on blade guard 120 100 Main motor power [S6 -40%] Hz50 kW: 7 Scoring motor power [S6 -40%] Hz50 kW: 0.9 Cutting width at rip fence (mm): 1600 Standard equipment and accessories - Optimizer/Process control app for tablets: SCM Thundercut. The app can be downloaded from the App Store or Play Store for tablets compatible with iPadOS or Android. It can be activated via the QR code supplied with the machine. The app enables: * Management of machine fleet and material/panel storage * Creation and editing of projects, importing projects from main furniture design software (file format "cpout"), importing cutting lists * Optimization of cutting lists by selecting one or more proposals from the optimization software integrated into the app * Correct machine settings for each cut, thanks to the simple and intuitive graphics of the 3D sequencer, guiding the operator step by step * Printing barcode labels to identify the various parts, via Bluetooth connection with compatible label printers. - 10-year warranty on the sliding table guide system - Sliding carriage entirely made of aluminum structure with guidance on crimped, hardened and arc-ground steel rails with large contact area - Max. saw blade diameter* up to 450mm with scoring blade mounted* up to 550mm without scoring blade - eye-S 15" electronic control including: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental modes: - Height adjustment of the main saw blade - Tilt adjustment of the saw unit - Rip fence adjustment - Height and lateral adjustment of the scorer (the scorer is automatically raised to the set position on activation and lowered on deactivation) * Operator assistance functions for complex cuts * Ability to store up to 1000 programs with associated image * Ability to store up to 1000 different tools with associated image * Cutting process management of preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic import of working dimensions from Thundercut app * USB port * Ready for network connection - Auxiliary function of the electronic control, including: * Determination of correct fence position on rip fence for format processing with tilted saw blade * Determination of correct fence position on rip fence for angle cuts with mitre fence on the work table with or without tilted saw blade - Pivoting control panel above the table - Scoring unit with independent Hfjdpfx Ahoxqtvqeaeh

Condition: used, Year of construction: 2001, Min./Max. working width (finished size): 23 - 180 mm Min./Max. working height (finished size): 6 - 105 mm Min. workpiece length: 300 mm Feed speed: 6 - 12 rpm Spindle speed: 6000 rpm Spindle diameter: 35 mm Motor power, horizontal spindle: 10 kW Motor power, vertical spindle: 7.5 kW Feed motor power: 1 kW Diameter of feed rollers: 120 mm Extraction port diameter 1 pc: 150 mm Extraction port diameter 2 pcs: 120 mm Weight: approx. 950 kg Storage location: Supplier Hjdpfx Ahoym D Eioajfh

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: A3347169, functionality: fully functional, number of axes: 3, CNC machine SCM, Record 100 AL action line, 3-axis woodworking line, 400V, year of manufacture 16/07/2008, electrical cabinet, control with safety mat, partition wall, working area 305 x 122 cm, total machine dimensions: approx. 565 x 250 x 260 cm, self-dismantling required 3 axes In perfect working condition 1 large vacuum with details of white panel and 1 small vacuum: Year 2019 / N°A3347169 Type VTLF2.250/0-79 Frequency 50/50Hz Speed 950/1150min-1 Power required 5.5/6.4kW Inlet capacity 244/286m³/h Hsdpexg El Ajfx Ahaofh Max vacuum 200/200mbar Video available.

Condition: excellent (used), Catalog number 7713 Hodpfx Ajzab Eyohaefh TECHNICAL DATA - max. width of workpiece 240mm - max. height of workpiece 130mm - 6 spindles: 1) horizontal lower 240mm, 7.5kW 2) vertical right 130mm, 5.5kW 3) vertical left 130mm, 5.5kW 4) horizontal upper 240mm, 7.5kW 5) horizontal upper 240mm, 5.5kW Spindles 4 and 5 are electrically adjustable up/down 6) horizontal lower 240mm, 5.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm *top: - 8 metal feed rollers, toothed, including 3 double rollers - 4 smooth rubber feed rollers, including 2 double rollers *bottom: - 3 smooth feed rollers - 3 side pressure rollers - stepless feed speed adjustment via inverter - rollers with pneumatic pressure - feed motor 7.5kW - feed via Cardan shafts - electric adjustment of planing thickness - body lifting motor 0.75kW - length of infeed table 2480mm - pneumatic opening/closing of the guard - pneumatic blowing of the table - central lubrication of the table - diameter of dust extraction nozzles 3x120mm, 3x150mm - dimensions L/W/H 5300x1700x1800mm - weight 5000kg ADVANTAGES - Made in Italy - With 6 heads - For both wet and dry wood - Pneumatic opening of the guard - Pneumatic blowing of the table - Spindles 4 and 5 are electrically adjustable - Used planer, very good condition Net price: 116900 PLN Net price: 27850 EUR, depending on the exchange rate of 4.2 EUR (Prices may change due to significant fluctuations)

Condition: good (used), SCM M2 multi-blade saw Type: M2 Blade width: 220 mm Hfodpfozcdfusx Ahaoh

Condition: good (used), SCM S63 Thicknessing Machine Hfjdpfx Aezcc Ubjhash Type: S63 Working width: 630 mm 4 knives in the cutterhead 2 rollers in the table Electric height adjustment of the table

Condition: used, machine/vehicle number: 008047, Position 1: Brushing Machines SCM-BRAVOROBOT P1 Position 2: spraying machine SCM-BRAVOROBOT P1 Hsdpfx Ahow Idbyeaefh Position 3: Roller Conveyors SCM-BRAVOROBOT P1 Position 4: Compressed Air Dryers SCM-BRAVOROBOT P1 Position 5: Ovens SCM-BRAVOROBOT P1