Used Scm Dogma for sale (607)

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Gbedpjr A Eq Rofx Afnjh Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: new, spindle moulder with tillable spindle guaranteed quality at your finger tips - easy-to-use the operator easily adjusts all movements due to a hand wheel with mechanical decimal readouts located on the front of the machine. spindle speed readout via LED's left right turning of spindle spindle moulder fence with manual adjustment machine in version 'LL' with left and right table elongation (2500 mm), pull - out work piece support and emergency stop button carriage on work table for tenoning works incl. fence and work piece clamp incl. feeder unit STEFF 2048 4 rollers 8 speeds work table dimensions 1200 (2500) x 855 mm spindle DM 30 mm usable spindle lenght 125 mm max. tool DM under table 240 x 80 mm suction connection DM 2 x 120 mm motor 5,5 kW INcL. OPTIONS: version 'LL' with long cast iron tables (2500 mm) & pull out work piece support in front fence with hand wheel adjustment and numerical read out machine dimensions L x B x H = 2500 x 855 x 900 weight approx. 500 kg Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. Gbodpfx Afscuwptensh • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Year of construction: 2023, Stable cast iron construction Milling spindle can be swiveled backwards from 0° to -45° Right-left rotation of the milling spindle Generously dimensioned milling unit made of cast iron, attached directly to the table Solid and precise cast iron table Standard curved milling protection hood Gbjdpfx Ajiknp Rofneh Aluminum sliding carriage ball contact system Torsion-resistant, highly precise, smooth-running and problem-free in daily use 10-year SCM guarantee on wear of the guideways Milling spindle mounted high up with precision ball bearings, resulting in the lowest possible bearing load and the longest possible service life Exact router fence with quick adjustment and fine adjustment with a scale on the stop jaw Integrated suction connection Large milling table opening allows the use of larger tools Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Working table L x W = 1000 x 435 mm Table height 900 mm Sliding carriage length 1000 mm Sliding carriage width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle inclination 0 to -45 ° Spindle usable length 100 mm Overhang max. above table 130 mm Spindle speeds 3500/7000/10000 rpm Mandrel diameter 30 mm Tool diameter max. lowerable 180 mm

Condition: new, Work table adjustment in the infeed by means of parallelogram system Display for chip removal via degree scale Simultaneous height adjustment and locking of the work tables complete with anti-tilt device Quick changeover system for changing from dressing to thicknessing operations (CE version) by means of a special support for the opening of the dressing tables and an automatic pneumatic positioning system of the suction hood, with hydraulic assistance. "READY" electronic control includes: - Thicknessing table adjustment - Manual, semi-automatic and automatic mode with 99 storable working programs. - Additional functions: Calculator and hour meter Automatic star delta start for main engine Machine table with height adjustment via 4 steel threaded spindles Rubber-coated feed roller at the outlet Exchangeable feed rollers Link pressure shoes in the infeed Planing shaft and setting gauge for planing knives Micro protection switch for correct positioning of the dressing tables and extraction hoods Dressing hood (CE version) Automatic motor brake on main motor Thermal protection switch Emergency stop switch Lockable main switch CE Declaration of Conformity Technical data [mm Gbjdpfx Aed Akyzsfneh Usable working width [mm] 520 Total table length [mm] 2310 Blade shaft diameter [mm] 120 Motor power [kW] 9.0 Hz 50, 400 V Planer shaft speed [rpm] 5000 4 knives [mm] 35 x 3 x 520 Aluminium planing fence [mm] 1200 x 190 Planing fence inclination from 90° to -45 Min./ma

Condition: new, both working tables open at the same time! working width 410 mm cutter block DM 95 mm knife dimensions 410 x 30 x 3 max. chip removal 5 mm Gedpfx Afjdvn Hwenobh working table length 2200 mm thicknesses table dim. 410 x 775 mm feed speed 6/12 m/ min min. ÷ max. work piece height 3 ÷ 240 mm Motorleistung 5,0 kW, 400V, 50 Hz incl. options: "Tersa”-cuter block Ø 95 mm, with 4 pcs knifes auxiliary fence for small work pieces electric height adjustment for thicknessing table with digital readout

Condition: new, - extra long - one piece - planing tables (2250 mm) from cast iron - simultaneous opening and closing of planer tables with locking system - heavy duty industrial style main motor - fixed suction hood - planer fence dimension 1200 x 150 mm with small parts fence - feeder with 4 feed speeds and separate motor - thicknesser table mounted on 4 solid spindles and linear guides - high quality steel anvil roller - rubber coated outfeed roller - digital display of thicknessing height - autom. star triangle switch techiscal data: total planer table lenght 2250 mm max. working width 520 mm max. chip removal 5 mm dimensions thicknessing table 850 x 520 mm min/max. working height 3/ 240 mm feed speeds 5/ /8 /12/ 18 m/min planer head dimension 120 mm/ incl. 4 pcs HSS cutter knifes planer head speed 5000 1/min main motor 400 V/50 Hz/S6 - 40 % 7,0 kW suction hood dimension 1 x 120 mm weight approx. 650 kg - "Teresa"-cutter block Ø 120 mm, mono block, with 4 knifes - additional fence for small work pieces Gedpfx Afscq E Uujnobh - motorised height adjustment for thicknesser table with digital read out - thicknesser table with 2 rollers

Condition: new, band saw according to CE and with the following features strong cast iron work table, inclinable balanced cast iron fly wheels saw blade guide, telescopic saw blade tensioning indication upper and lower saw blade guide cleaning brush for the lower fly wheel sturdy AL fences max saw blade width 16 mm suction connection under the table micro switches on machine doors Godpfxedibw As Afnjbh work table dimensions 600 x 520 mm working table height 900 mm fly wheel DM 450 mm fly wheel speed 700 U/ min max cutting height 300 mm max cutting width 440 mm min/ max saw blade length 3690/ 3742 mm min/ max saw blade dimension 6 x 0,5 / 25 x 0,5 mm motor 3,0 kW, 3 Ph 50 Hz, 400 V suction connection 120 mm

Condition: new, Working width (finished size) 23 – 180 mm Working height (finished size) 6 -105 mm Min. length of single workpiece 300 mm Feed speed 6 – 12 m/min Gsdpfx Ajiiv Dcsfnobh Motor power horizontal spindles 2 x 7.5 kW Motor power vertical spindles 1 x 7.5 kW Spindle speed 6000 rpm Spindle diameter 35 mm Clamping length vertical spindles 120 mm Clamping length horizontal spindles 190 mm Manual lubricant pump Profile capacity without axial adjustment on vertical spindle 10 mm Los roller integrated in the outfeed table Suction DM 4 x 120 mm Including OPTIONS: - Motor-driven feed roller in front of the planer with lever for quick changeover - Front vertical printing unit in front of the left vertical spindle - Feed table length 2300 mm - Tool package consisting of 4 planing heads and a joint rebate cutter

Condition: reconditioned (used), Year of construction: 2005, through feed moulder with 9 spindles and SCM control 100 PC control system Max. Working width 240 mm Min. Working width 25 mm Max. Working height 120 mm Min. Working height 10 mm Min. Work piece length 640 mm feed speed 6 - 36 m/ min, variabel Spindle DM 40 mm Usable length vertical spindles 140 mm Usable length horizontal spindles 250 mm Axial adjustment vertical spindles 0 - 80 mm Axial adjustment horizontal spindles 0 - 45 mm Min and max. Tool DM 100 - 220 mm Min. And Max. Tool DM on planer spindle 120 - 140 mm Profiling capacity of 2. Bottom horizontal spindle with tool DM 200 mm = 15 mm Power feeder motor 5,5 kW DM feeder rollers 140 mm Infekt table length 2500 mm Quick adjustment indeed table and fence 10 mm Required suction capacity 7500 m3/ h Compressed air requirement 6 - 10 bar Weight approx 6000 kg Dimension approx. L x W x H = 6300 x 1620 x 1655 mm Gbsdpfog Umrmex Afnjh Spindle arrangement: Bottom horizontal spindle Motor 11,0 kW Spindle Speed 6000 RPM Right vertical spindle Motor 7,5 kW Spindle Speed 8300 RPM Left vertical Spindle Motor 7,5 kW Spindle Speed 8300 RPM 2. Right vertical spindle Motorleistung 7,5 kW Wellendrehzahl 8300 RPM 2. Left vertical spindle Motor 7,5 kW Spindle Speed 8300 RPM Top horizontal spindle Motor 11,0 kW spindle speed 8300 RPM 2. Bottom horizontal spindle Motor 12,0 kW spindle speed 8300 RPM 2. Top horizontal spindle Motor 11,0 kW spindle speed 8300 U/min 3. Bottom horizontal spindle Motor 7,5 kW spindle speed 8300 U/ min SET - UP quick set up system reduces down times Power Lifting of the feed system and upper spindle units with 100 PC control Pneumatic opening of safety hood full Kardan feed system Feed speed variable Segmented pressure shoe before upper horizontal spindle with parallelogram movement and pneumatic pressure Fine adjustment of outfield table Pneumatic blocking of spindle in working position incl. ZIWO CL 15 automatic feeding unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, The model ME 40TR is SCM’s ‘bestseller and in this category offering unrivaled price / performance ratio. We can offer the following new machine SCM me 40tr, CE Volt 400 EU, frequency 50 Hz edge thickness coils 0,4 - 3 mm max. edge thickness strips 5 mm min. – max. work piece thickness 8 - 50 mm feed speed 9 m/ min glue pot unit 0,18 kW, capacity 0,8 kg premiling aggregate 2,2 kW, 9000 U/ min end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel trimming unit 2 x 0,35 kW, 12.000 U/ min OPTIONAL device for panel preheating edge scraping unit flat scraping unit Gbjdpfjc S Di Rsx Afnoh grooving unit 1,1 kW, 12.000 U/ min, notch width 4 mm brushing unit with 2 independent motors magazine for strip edges kid for quick exchange of glue unit ...

Condition: new, Sturdy cast steel construction High-precision sizing slide made of anodized aluminium with a travel of 2250 mm Maximum saw blade diameter of 315 mm possible, saw blade can be tilted 45 Large trimming frame (960 x 600 mm) with telescopic aluminum fence that can be extended up to 2660 mm Heavily ribbed dressing work tables made of gray cast iron, re-annealed and stress-free for decades of stability and flatness Helical toothed steel feed roller for even material feed Three milling speeds, manually adjustable Milling spindle with right/left rotation Three independent industrial motors With lockable main switch, motor protection switch, emergency stop switch Dressing table width 410 mm Dressing table length 1810 mm Chip removal max. 4 mm Thicknessing table length 605 mm Thicknessing table width 410 mm Working height min. 3 mm Working height max. 230 mm Feed speed 7 m/min Chip removal max. 4 mm Suction nozzle diameter 4 x 120 mm Planer cutterblock type TERSA (3 pcs.) Planer shaft diameter 72 mm Speed 5200 min-¹ Circular saw Edging length 2250 mm Cutting width with rip fence 900 mm Max. Cutting width to the left of the saw blade 2310 mm Saw blade inclination 90 - 45 ° Max. Cutting height at 90° 90 mm Max. Cutting height at 45° 63 mm Saw blade diameter 315 mm Saw blade speed 4000 min-¹ Sliding carriage and table Length of sliding table 2600 mm Spindle diameter 30 mm Speeds 3500/7000/ 10000 min-¹ Milling tool diameter max. lowerable/ not lowerable 180/ 210 mm Power drive motor 3 x 5.0 kW, 400 V, 50 Hz Machine weight approx. 560 kg Gbsdpfx Afoiiynnonoh INCLUDING OPTIONS - Handwheel with gravitational-numerical display for thicknessing table positioning - Sliding carriage length 2600 mm - Professional stops - "TERSA" planer cutterhead - Right-left rotation of the cutter

Condition: as good as new (ex-display), 21-spindle single-head drilling machine, suitable for all carpentry needs, ideal for joining a work center to save time and release it from horizontal drilling operations. PNEUMATIC HEAD ROTATION - with lock and stop reference from 0° to 90°at any angle. SIDE REFERENCE FENCES - Adjustable cast iron fences on a metric scale thanks to a magnify glass and nonius. PATENTED SPIRAL SYSTEM - Device for boring depth adjustment, allowing an easy and quick set-up on a millimetric scale according to the different drill lengths. no of drilling spindles 21 # distance between drilling spindles 32 mm Godpfx Afsd Supgsnjbh working width 640 mm max drilling depth 65 mm no. of pneumatic work piece clamps 2 # work piece dimensions max 900 x 3000 x 60 mm motor 1,5 kWm 50 Hz, 400 V, 2800 rpm pneumatic pressure requirement 6-8 bar compressed air consumption 10 l/cycle suction DM 80 mm machine dimensions L x W x H = 1030 x 1030 x 1285 mm weight 240 Kg

Condition: new, work table dimensions 2500 x 780 mm spindle DM 30 mm tilting of spindle +/- 45,50 usable spindle lenght 140 mm Max. tool DM under table 300 x 80 mm suction DM 1 x 120 & 2 x 100 mm Motor elektrospindel 7,50 kW elektro spindel with inverter for speed 900 to 12.000 RPM control panel with mit "Easy Touch 7" program "Flex"- fence with autom. adjustment via 'Easy Touch 7' left right turning of spindle table elongation front INCL. OPTIONS: - "Fast” table with autom. adjustment via 'Easy Touch 7' control - version “LL” with 2 cast iron tables (2500 mm) Gjdjd Etkhopfx Afnsbh Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Wide belt sander SCM Sandya CLK + Vacuum Working width: 1100 mm Working height: 3–160 mm Number of sanding units: 2 Gbsdpfx Afeyhfnnenjh Calibrating roller: rubber-coated Combi unit with sanding shoe Main dual-speed motor: 12/15 kW Optical oscillation Satin-finish brush at machine outlet

Condition: used, Year of construction: 1994, Motor 6 / 7.5 kW Worktable: 1200 x 730 mm + extensions Worktable height: 920 mm Spindle tilt: -10° + 45° Max. spindle projection above table: 175 mm Spindle speeds: 3250/6500-5000/10000 rpm Max. tool diameter: 250 mm Weight: approx. 950 kg Storage location: Nattheim Gjdpfxew Enw Io Afnebh

Condition: used, machine/vehicle number: 007855, Position 1: Single Edgebanders SCM-STEFANI KD Gjdpjyhml Iofx Afnebh Position 2: Panel Return Systems SCM-STEFANI KD

Condition: used, Year of construction: 2018, Price: On request CNC machining centre SCM ACCORD 25 FX Brand SCM Type ACCORD 25 FX  Year of construction 2018 Machine no. AA10000992 Machining table dimensions 5020x1380 mm (LxW) Worktable equipped with 2 vacuum fields Worktable equipped with 2 reference lugs Including 8 reference lugs and 8 supports  Speed XY, vector 35 m/min Gbodoycwupopfx Afnjh Movement axes Maximal speed X axis 25 m/min (pro space) Maximum speed X axis 90 m/min (pro speed) Maximum speed Y axis 90 m/min Maximum speed Z-axis 30 m/min Control unit Machine control KVARA control Windows Embedded Standard 7-64bit Hard disk storage capacity 500GB-7200rpm Microprocessor Intel Pentium-2.9GHz RAM memory 8GB-DDR4 XILOG-MAESTRO software package Including vacuum pump  Motor power 5.5 kW Pump capacity 250m3/hour Vacuum pressure maximum 0.9 bar Total dimensions 9000x4500x3000 (LxWxH) Total weight 7,500 KG.  - Year: 2018 - Documentation available: No - CE certificate present: No - Serial number: AA10000992 - Type milling table: Beam table - Vacuum pump present: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2011, total length: 4,000 mm, total height: 1,600 mm, total width: 970 mm, Weight: 1.300 kg Price: On request - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AH/115214 - Number of units [pcs]: 6 - Max. edge band thickness [mm]: 6 - Max. panel thickness [mm]: 60 - Min. panel length [mm]: 140 - Max. feed speed [m/min]: 11 Gjdpjwnickofx Afnsbh - Voltage [V]: 400 - Current consumption [A]: 23 - Transport dimensions: 4000mm x 975mm x 1600mm (l x w x h) - Transport weight [kg]: 1300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), CATALOGUE NUMBER 7879 Technical data: - Track width: 220mm - Shaft width: 200mm - Max blade diameter: 350mm - Blade bore diameter: 70mm - Max cutting height: 120mm - Table width with clearance: 900mm - Table length: 1640mm - From above: - Row of pawls/kickback fingers - 1 pressure, sliding roller, metal - Pawls - Pressure, sliding roller, metal - Shaft with saws - 2 pressure, sliding rollers, metal - From below: - Guide - Pawls/kickback fingers - Track - Stepless feed speed adjustment - Feed motor 1.1kW Gjdpfxjyf A Iae Afnebh - Main motor approx. 30kW - Central track lubrication - Insert for short elements - Extraction port diameter: 180mm - Overall dimensions (L/W/H): 1700x1500x1450mm - weight 1450kg ADVANTAGES – Italian-made – Insert for short elements – Used multi-blade saw – Very good condition Net price: 26,900 PLN Net price: 6,405 EUR (exchange rate 4.20 EUR) (Prices may vary with significant market fluctuations)

Condition: excellent (used), Catalogue number 7878 TECHNICAL DATA - track width: 220 mm - shaft width: 200 mm - max saw blade diameter: 350 mm - saw blade bore diameter: 70 mm - max cutting height: 120 mm - table width with clearance: 1100 mm - table length: 1640 mm - from above: - row of pawls/kickers Gjdpfx Afsyf A Elonebh - 1 metal pressure feed roller - pawls - metal pressure feed roller - shaft with saws - 2 metal pressure feed rollers - from below: - guide - pawls/kickers - track - stepless feed speed adjustment with inverter - feed motor: 1.1 kW - main motor: 29 kW - central lubrication of the track - extraction port diameter: 180 mm - overall dimensions (LxWxH): 2000x1600x1500 mm - weight: 1480 kg ADVANTAGES – Italian manufacture – used multi-blade saw – very good condition Net price: 27,900 PLN Net price: 6,643 EUR based on 4.20 EUR exchange rate (Prices may change depending on exchange rate fluctuations)

Condition: repair required (used), Thickness planer Manufacturer: SCM Model: S63 B Year of construction: N.A. Working width: 630 mm Max. workpiece height: 240 mm Gbsdpfx Aoyh Ut Rofnjh Min. workpiece height: 3 mm Max. stock removal: 8 mm Table size: 630 x 1,000 mm Power: 5.5 kW Knife type: Tersa Number of knives: 4 Outfeed roller: Steel 1x table roller, driven Height adjustment: Electric - Manual Feed speed: 6 - 18 m/min; infinitely variable Speed: 4,500 rpm Dimensions: 1,250 x 1,050 x 805 mm Weight: 825 kg

Condition: used, machine/vehicle number: 008111, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR Premilling Unit: yes Gedpfsx A Ti Isx Afnobh Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008118, main blade diameter: 315 mm Gbodpfx Afeyhbmgsnsh Scorer: yes

Condition: used, machine/vehicle number: 007853, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, PUR Gbedpfoyhbkxsx Afnoh Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: used, machine/vehicle number: 007854, Max. panel width: 1200 mm Gbedpfx Ajyhbh Rofnjh Max. panel length: 2500 mm Length of conveyor: 9000 mm Panel return for edgebander: Left